1
0
mirror of https://github.com/golang/go synced 2024-11-23 18:20:04 -07:00
Commit Graph

3179 Commits

Author SHA1 Message Date
Matthew Dempsky
b2c397e537 cmd/compile: disallow converting string to notinheap slice
Unlikely to happen in practice, but easy enough to prevent and might
as well do so for completeness.

Fixes #28243.

Change-Id: I848c3af49cb923f088e9490c6a79373e182fad08
Reviewed-on: https://go-review.googlesource.com/c/142719
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Austin Clements <austin@google.com>
2018-11-02 19:53:59 +00:00
Clément Chigot
85525c56ab all: skip unsupported tests on AIX
This commit skips tests which aren't yet supported on AIX.

nosplit.go is disabled because stackGuardMultiplier is increased for
syscalls.

Change-Id: Ib5ff9a4539c7646bcb6caee159f105ff8a160ad7
Reviewed-on: https://go-review.googlesource.com/c/146939
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
2018-11-02 16:12:08 +00:00
Keith Randall
0ad332d80c cmd/compile: implement some moves using non-overlapping reads&writes
For moves >8,<16 bytes, do a move using non-overlapping loads/stores
if it would require no more instructions.

This helps a bit with the case when the move is from a static
constant, because then the code to materialize the value being moved
is smaller.

Change-Id: Ie47a5a7c654afeb4973142b0a9922faea13c9b54
Reviewed-on: https://go-review.googlesource.com/c/146019
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-30 20:27:03 +00:00
Keith Randall
f14067f3c1 cmd/compile: when comparing 0-size types, make sure expr side-effects survive
Fixes #23837

Change-Id: I53f524d87946a0065f28a4ddbe47b40f2b43c459
Reviewed-on: https://go-review.googlesource.com/c/145757
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
2018-10-30 17:45:19 +00:00
Ben Shi
455ef3f6bc test/codegen: improve arithmetic tests
This CL fixes several typos and adds two more cases
to arithmetic test.

Change-Id: I086560162ea351e2166866e444e2317da36c1729
Reviewed-on: https://go-review.googlesource.com/c/145210
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-30 14:39:53 +00:00
Ben Shi
5f5ea3fd4d cmd/compile: optimize amd64's ADDQconstmodify/ADDLconstmodify
This CL optimize amd64's code:
"ADDQ $-1, MEM_OP" -> "DECQ MEM_OP"
"ADDL $-1, MEM_OP" -> "DECL MEM_OP"

1. The total size of pkg/linux_amd64 (excluding cmd/compile)
decreases about 0.1KB.

2. The go1 benchmark shows little regression, excluding noise.
name                     old time/op    new time/op    delta
BinaryTree17-4              2.60s ± 5%     2.64s ± 3%  +1.53%  (p=0.000 n=38+39)
Fannkuch11-4                2.37s ± 2%     2.38s ± 2%    ~     (p=0.950 n=40+40)
FmtFprintfEmpty-4          40.4ns ± 5%    40.5ns ± 5%    ~     (p=0.711 n=40+40)
FmtFprintfString-4         72.4ns ± 5%    72.3ns ± 3%    ~     (p=0.485 n=40+40)
FmtFprintfInt-4            79.7ns ± 3%    80.1ns ± 3%    ~     (p=0.124 n=40+40)
FmtFprintfIntInt-4          126ns ± 3%     127ns ± 3%  +0.71%  (p=0.027 n=40+40)
FmtFprintfPrefixedInt-4     153ns ± 4%     153ns ± 2%    ~     (p=0.604 n=40+40)
FmtFprintfFloat-4           206ns ± 5%     210ns ± 5%  +1.79%  (p=0.002 n=40+40)
FmtManyArgs-4               498ns ± 3%     496ns ± 3%    ~     (p=0.099 n=40+40)
GobDecode-4                6.48ms ± 6%    6.47ms ± 7%    ~     (p=0.686 n=39+40)
GobEncode-4                5.95ms ± 7%    5.96ms ± 6%    ~     (p=0.670 n=40+34)
Gzip-4                      224ms ± 6%     223ms ± 5%    ~     (p=0.143 n=40+40)
Gunzip-4                   36.5ms ± 4%    36.5ms ± 4%    ~     (p=0.556 n=40+40)
HTTPClientServer-4         60.7µs ± 2%    59.9µs ± 3%  -1.20%  (p=0.000 n=39+39)
JSONEncode-4               9.03ms ± 4%    9.04ms ± 4%    ~     (p=0.589 n=40+40)
JSONDecode-4               49.4ms ± 4%    49.2ms ± 4%    ~     (p=0.276 n=40+40)
Mandelbrot200-4            3.80ms ± 4%    3.79ms ± 4%    ~     (p=0.837 n=40+40)
GoParse-4                  3.15ms ± 5%    3.13ms ± 5%    ~     (p=0.240 n=40+40)
RegexpMatchEasy0_32-4      72.9ns ± 3%    72.0ns ± 8%  -1.25%  (p=0.003 n=40+40)
RegexpMatchEasy0_1K-4       229ns ± 5%     230ns ± 4%    ~     (p=0.318 n=40+40)
RegexpMatchEasy1_32-4      66.9ns ± 3%    67.3ns ± 7%    ~     (p=0.817 n=40+40)
RegexpMatchEasy1_1K-4       371ns ± 5%     370ns ± 4%    ~     (p=0.275 n=40+40)
RegexpMatchMedium_32-4      106ns ± 4%     104ns ± 7%  -2.28%  (p=0.000 n=40+40)
RegexpMatchMedium_1K-4     32.0µs ± 2%    31.4µs ± 3%  -2.08%  (p=0.000 n=40+40)
RegexpMatchHard_32-4       1.54µs ± 7%    1.52µs ± 3%  -1.80%  (p=0.007 n=39+40)
RegexpMatchHard_1K-4       45.8µs ± 4%    45.5µs ± 3%    ~     (p=0.707 n=40+40)
Revcomp-4                   401ms ± 5%     401ms ± 6%    ~     (p=0.935 n=40+40)
Template-4                 62.4ms ± 4%    61.2ms ± 3%  -1.85%  (p=0.000 n=40+40)
TimeParse-4                 315ns ± 2%     318ns ± 3%  +1.10%  (p=0.002 n=40+40)
TimeFormat-4                297ns ± 3%     298ns ± 3%    ~     (p=0.238 n=40+40)
[Geo mean]                 45.8µs         45.7µs       -0.22%

name                     old speed      new speed      delta
GobDecode-4               119MB/s ± 6%   119MB/s ± 7%    ~     (p=0.684 n=39+40)
GobEncode-4               129MB/s ± 7%   128MB/s ± 6%    ~     (p=0.413 n=40+34)
Gzip-4                   86.6MB/s ± 6%  87.0MB/s ± 6%    ~     (p=0.145 n=40+40)
Gunzip-4                  532MB/s ± 4%   532MB/s ± 4%    ~     (p=0.556 n=40+40)
JSONEncode-4              215MB/s ± 4%   215MB/s ± 4%    ~     (p=0.583 n=40+40)
JSONDecode-4             39.3MB/s ± 4%  39.5MB/s ± 4%    ~     (p=0.277 n=40+40)
GoParse-4                18.4MB/s ± 5%  18.5MB/s ± 5%    ~     (p=0.229 n=40+40)
RegexpMatchEasy0_32-4     439MB/s ± 3%   445MB/s ± 8%  +1.28%  (p=0.003 n=40+40)
RegexpMatchEasy0_1K-4    4.46GB/s ± 4%  4.45GB/s ± 4%    ~     (p=0.343 n=40+40)
RegexpMatchEasy1_32-4     479MB/s ± 3%   476MB/s ± 7%    ~     (p=0.855 n=40+40)
RegexpMatchEasy1_1K-4    2.76GB/s ± 5%  2.77GB/s ± 4%    ~     (p=0.250 n=40+40)
RegexpMatchMedium_32-4   9.36MB/s ± 4%  9.58MB/s ± 6%  +2.31%  (p=0.001 n=40+40)
RegexpMatchMedium_1K-4   32.0MB/s ± 2%  32.7MB/s ± 3%  +2.12%  (p=0.000 n=40+40)
RegexpMatchHard_32-4     20.7MB/s ± 7%  21.1MB/s ± 3%  +1.95%  (p=0.005 n=40+40)
RegexpMatchHard_1K-4     22.4MB/s ± 4%  22.5MB/s ± 3%    ~     (p=0.689 n=40+40)
Revcomp-4                 634MB/s ± 5%   634MB/s ± 6%    ~     (p=0.935 n=40+40)
Template-4               31.1MB/s ± 3%  31.7MB/s ± 3%  +1.88%  (p=0.000 n=40+40)
[Geo mean]                129MB/s        130MB/s       +0.62%

Change-Id: I9d61ee810d900920c572cbe89e2f1626bfed12b7
Reviewed-on: https://go-review.googlesource.com/c/145209
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
2018-10-30 00:22:58 +00:00
Robert Griesemer
70dd90c4a9 cmd/compile: revert "typecheck types and funcs before consts"
This reverts commit 9ce87a63b9.

The fix addresses the specific test case, but not the general
problem.

Updates #24755.

Change-Id: I0ba8463b41b099b1ebf49759f88a423b40f70d58
Reviewed-on: https://go-review.googlesource.com/c/145617
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
2018-10-29 19:51:57 +00:00
Daniel Martí
9ce87a63b9 cmd/compile: typecheck types and funcs before consts
This way, once the constant declarations are typechecked, all named
types are fully typechecked and have all of their methods added.

Usually this isn't important, as methods and interfaces cannot be used
in constant declarations. However, it can lead to confusing and
incorrect errors, such as:

	$ cat f.go
	package p

	type I interface{ F() }
	type T struct{}

	const _ = I(T{})

	func (T) F() {}
	$ go build f.go
	./f.go:6:12: cannot convert T literal (type T) to type I:
		T does not implement I (missing F method)

The error is clearly wrong, as T does have an F method. If we ensure
that all funcs are typechecked before all constant declarations, we get
the correct error:

	$ go build f2.go
	# command-line-arguments
	./f.go:6:7: const initializer I(T literal) is not a constant

Fixes #24755.

Change-Id: I182b60397b9cac521d9a9ffadb11b42fd42e42fe
Reviewed-on: https://go-review.googlesource.com/c/115096
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
2018-10-29 18:10:54 +00:00
Josh Bleecher Snyder
15c4575293 cmd/compile: convert arguments as needed
CL 114797 reworked how arguments get written to the stack.
Some type conversions got lost in the process. Restore them.

Fixes #28390
Updates #28430

Change-Id: Ia0d37428d7d615c865500bbd1a7a4167554ee34f
Reviewed-on: https://go-review.googlesource.com/c/144598
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
2018-10-28 18:22:36 +00:00
Keith Randall
9f291d1fc3 cmd/compile: fix rule for combining loads with compares
Unlike normal load+op opcodes, the load+compare opcode does
not clobber its non-load argument. Allow the load+compare merge
to happen even if the non-load argument is used elsewhere.

Noticed when investigating issue #28417.

Change-Id: Ibc48d1f2e06ae76034c59f453815d263e8ec7288
Reviewed-on: https://go-review.googlesource.com/c/145097
Reviewed-by: Ainar Garipov <gugl.zadolbal@gmail.com>
Reviewed-by: Ben Shi <powerman1st@163.com>
2018-10-27 00:59:54 +00:00
Keith Randall
dd789550a7 cmd/compile: intrinsify math/bits.Sub on amd64
name             old time/op  new time/op  delta
Sub-8            1.12ns ± 1%  1.17ns ± 1%   +5.20%          (p=0.008 n=5+5)
Sub32-8          1.11ns ± 0%  1.11ns ± 0%     ~     (all samples are equal)
Sub64-8          1.12ns ± 0%  1.18ns ± 1%   +5.00%          (p=0.016 n=4+5)
Sub64multiple-8  4.10ns ± 1%  0.86ns ± 1%  -78.93%          (p=0.008 n=5+5)

Fixes #28273

Change-Id: Ibcb6f2fd32d987c3bcbae4f4cd9d335a3de98548
Reviewed-on: https://go-review.googlesource.com/c/144258
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-25 19:47:27 +00:00
Keith Randall
899f3a2892 cmd/compile: intrinsify math/bits.Add on amd64
name             old time/op  new time/op  delta
Add-8            1.11ns ± 0%  1.18ns ± 0%   +6.31%  (p=0.029 n=4+4)
Add32-8          1.02ns ± 0%  1.02ns ± 1%     ~     (p=0.333 n=4+5)
Add64-8          1.11ns ± 1%  1.17ns ± 0%   +5.79%  (p=0.008 n=5+5)
Add64multiple-8  4.35ns ± 1%  0.86ns ± 0%  -80.22%  (p=0.000 n=5+4)

The individual ops are a bit slower (but still very fast).
Using the ops in carry chains is very fast.

Update #28273

Change-Id: Id975f76df2b930abf0e412911d327b6c5b1befe5
Reviewed-on: https://go-review.googlesource.com/c/144257
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-25 19:47:00 +00:00
Robert Griesemer
6761b1eb1b cmd/compile: better errors for structs with conflicting fields and methods
If a field and method have the same name, mark the respective struct field
so that we don't report follow-on errors when the field/method is accessed.

Per suggestion of @mdempsky.

Fixes #28268.

Change-Id: Ia1ca4cdfe9bacd3739d1fd7ca5e014ca094245ee
Reviewed-on: https://go-review.googlesource.com/c/144259
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
2018-10-24 20:39:37 +00:00
Robert Griesemer
5538ecadca cmd/compile: better error for embedded field referring to missing import
Fixes #27938.

Change-Id: I16263ac6c0b8903b8a16f02e8db0e1a16d1c95b4
Reviewed-on: https://go-review.googlesource.com/c/144261
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
2018-10-24 20:08:18 +00:00
ChrisALiles
13d5cd7847 cmd/compile: use proved bounds to remove signed division fix-ups
prove is able to find 94 occurrences in std cmd where a divisor
can't have the value -1. The change removes
the extraneous fix-up code for these cases.

Fixes #25239

Change-Id: Ic184de971f47cc57c702eb72805b8e291c14035d
Reviewed-on: https://go-review.googlesource.com/c/130215
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
2018-10-23 02:29:44 +00:00
Keith Randall
dca769dca9 cmd/compile: in append(f()), type convert appended items
The second and subsequent return values from f() need to be
converted to the element type of the first return value from f()
(which must be a slice).

Fixes #22327

Change-Id: I5c0a424812c82c1b95b6d124c5626cfc4408bdb6
Reviewed-on: https://go-review.googlesource.com/c/142718
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
2018-10-22 17:30:57 +00:00
Ben Shi
95dda75bde cmd/compile: optimize store combination on 386/amd64
This CL add 3 rules to combine byte-store to word-store on386 and
amd64.

Change-Id: Iffd9cda42f1961680c81def4edc773ad58f211b3
Reviewed-on: https://go-review.googlesource.com/c/143057
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
2018-10-19 02:21:04 +00:00
Ian Lance Taylor
0a8e347751 test: update issue5089.go for recent gccgo changes
As of https://golang.org/cl/43456 gccgo now gives a better error
message for this test.

Before:
    fixedbugs/issue5089.go:13:1: error: redefinition of ‘bufio.Buffered’: receiver name changed
     func (b *bufio.Reader) Buffered() int { // ERROR "non-local|redefinition"
     ^
    fixedbugs/issue5089.go:11:13: note: previous definition of ‘bufio.Buffered’ was here
     import "bufio" // GCCGO_ERROR "previous"
                 ^

Now:
    fixedbugs/issue5089.go:13:7: error: may not define methods on non-local type
     func (b *bufio.Reader) Buffered() int { // ERROR "non-local|redefinition"
           ^

Change-Id: I4112ca8d91336f6369f780c1d45b8915b5e8e235
Reviewed-on: https://go-review.googlesource.com/c/130955
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
2018-10-18 17:53:42 +00:00
Ian Lance Taylor
8ccafb1ac7 test: add fixedbugs/bug506 for gccgo
Building with gccgo failed with an undefined symbol error from an
unnecessary hash function.

Updates #19773

Change-Id: Ic78bf1b086ff5ee26d464089c0e14987d3fe8b02
Reviewed-on: https://go-review.googlesource.com/c/130956
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
2018-10-18 04:57:41 +00:00
Ben Shi
4158734097 test/codegen: add more combined load/store test cases
This CL adds more combined load/store test cases for 386/amd64.

Change-Id: I0a483a6ed0212b65c5e84d67ed8c9f50c389ce2d
Reviewed-on: https://go-review.googlesource.com/c/142878
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
2018-10-18 01:57:54 +00:00
Matthew Dempsky
5185744962 cmd/compile: remove obsolete "safe" mode
Nowadays there are better ways to safely run untrusted Go programs, like
NaCl and gVisor.

Change-Id: I20c45f13a50dbcf35c343438b720eb93e7b4e13a
Reviewed-on: https://go-review.googlesource.com/c/142717
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
2018-10-17 19:00:37 +00:00
Josh Bleecher Snyder
f2a676536f test: limit runoutput concurrency with -v
This appears to have simply been an oversight.

Change-Id: Ia5d1309b3ebc99c9abbf0282397693272d8178aa
Reviewed-on: https://go-review.googlesource.com/c/142885
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
2018-10-17 16:42:42 +00:00
Robert Griesemer
e861c3e003 cmd/compile: simplified test case (cleanup)
Follow-up on https://golang.org/cl/124595; no semantic changes.

Updates #26411.

Change-Id: Ic1c4622dbf79529ff61530f9c25ec742c2abe5ca
Reviewed-on: https://go-review.googlesource.com/c/142720
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
2018-10-16 23:11:02 +00:00
Emmanuel T Odeke
0b63086f64 cmd/compile: fix label redefinition error column numbers
Ensure that label redefinition error column numbers
print the actual start of the label instead of the
position of the label's delimiting token ":".

For example, given this program:

package main

func main() {

            foo:
   foo:
foo:
foo            :
}

* Before:
main.go:5:13: label foo defined and not used
main.go:6:7: label foo already defined at main.go:5:13
main.go:7:4: label foo already defined at main.go:5:13
main.go:8:16: label foo already defined at main.go:5:13

* After:
main.go:5:13: label foo defined and not used
main.go:6:4: label foo already defined at main.go:5:13
main.go:7:1: label foo already defined at main.go:5:13
main.go:8:1: label foo already defined at main.go:5:13

Fixes #26411

Change-Id: I8eb874b97fdc8862547176d57ac2fa0f075f2367
Reviewed-on: https://go-review.googlesource.com/c/124595
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
2018-10-16 22:32:14 +00:00
Filippo Valsorda
a52289ef2b Revert "fmt: fix incorrect format of whole-number floats when using %#v"
Numbers without decimals are valid Go representations of whole-number
floats. That is, "var x float64 = 5" is valid Go. Avoid breakage in
tests that expect a certain output from %#v by reverting to it.

To guarantee the right type is generated by a print use %T(%#v) instead.

Added a test to lock in this behavior.

This reverts commit 7c7cecc184.

Fixes #27634
Updates #26363

Change-Id: I544c400a0903777dd216452a7e86dfe60b0b0283
Reviewed-on: https://go-review.googlesource.com/c/142597
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
2018-10-16 21:54:35 +00:00
Lynn Boger
39fa301bdc test/codegen: enable more tests for ppc64/ppc64le
Adding cases for ppc64,ppc64le to the codegen tests
where appropriate.

Change-Id: Idf8cbe88a4ab4406a4ef1ea777bd15a58b68f3ed
Reviewed-on: https://go-review.googlesource.com/c/142557
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
2018-10-16 19:00:53 +00:00
Ben Shi
4b78fe57a8 cmd/compile: optimize 386's load/store combination
This CL adds more combinations of two consequtive MOVBload/MOVBstore
to a unique MOVWload/MOVWstore.

1. The size of the go executable decreases about 4KB, and the total
size of pkg/linux_386 (excluding cmd/compile) decreases about 1.5KB.

2. There is no regression in the go1 benchmark result, excluding noise.
name                     old time/op    new time/op    delta
BinaryTree17-4              3.28s ± 2%     3.29s ± 2%    ~     (p=0.151 n=40+40)
Fannkuch11-4                3.52s ± 1%     3.51s ± 1%  -0.28%  (p=0.002 n=40+40)
FmtFprintfEmpty-4          45.4ns ± 4%    45.0ns ± 4%  -0.89%  (p=0.019 n=40+40)
FmtFprintfString-4         81.9ns ± 7%    81.3ns ± 1%    ~     (p=0.660 n=40+25)
FmtFprintfInt-4            91.9ns ± 9%    91.4ns ± 9%    ~     (p=0.249 n=40+40)
FmtFprintfIntInt-4          143ns ± 4%     143ns ± 4%    ~     (p=0.760 n=40+40)
FmtFprintfPrefixedInt-4     184ns ± 3%     183ns ± 4%    ~     (p=0.485 n=40+40)
FmtFprintfFloat-4           408ns ± 3%     409ns ± 3%    ~     (p=0.961 n=40+40)
FmtManyArgs-4               597ns ± 4%     602ns ± 3%    ~     (p=0.413 n=40+40)
GobDecode-4                7.13ms ± 6%    7.14ms ± 6%    ~     (p=0.859 n=40+40)
GobEncode-4                6.86ms ± 9%    6.94ms ± 7%    ~     (p=0.162 n=40+40)
Gzip-4                      395ms ± 4%     396ms ± 3%    ~     (p=0.099 n=40+40)
Gunzip-4                   40.9ms ± 4%    41.1ms ± 3%    ~     (p=0.064 n=40+40)
HTTPClientServer-4         63.6µs ± 2%    63.6µs ± 3%    ~     (p=0.832 n=36+39)
JSONEncode-4               16.1ms ± 3%    15.8ms ± 3%  -1.60%  (p=0.001 n=40+40)
JSONDecode-4               61.0ms ± 3%    61.5ms ± 4%    ~     (p=0.065 n=40+40)
Mandelbrot200-4            5.16ms ± 3%    5.18ms ± 3%    ~     (p=0.056 n=40+40)
GoParse-4                  3.25ms ± 2%    3.23ms ± 3%    ~     (p=0.727 n=40+40)
RegexpMatchEasy0_32-4      90.2ns ± 3%    89.3ns ± 6%  -0.98%  (p=0.002 n=40+40)
RegexpMatchEasy0_1K-4       812ns ± 3%     815ns ± 3%    ~     (p=0.309 n=40+40)
RegexpMatchEasy1_32-4       103ns ± 6%     103ns ± 5%    ~     (p=0.680 n=40+40)
RegexpMatchEasy1_1K-4      1.01µs ± 4%    1.02µs ± 3%    ~     (p=0.326 n=40+33)
RegexpMatchMedium_32-4      120ns ± 4%     120ns ± 5%    ~     (p=0.834 n=40+40)
RegexpMatchMedium_1K-4     40.1µs ± 3%    39.5µs ± 4%  -1.35%  (p=0.000 n=40+40)
RegexpMatchHard_32-4       2.27µs ± 6%    2.23µs ± 4%  -1.67%  (p=0.011 n=40+40)
RegexpMatchHard_1K-4       67.2µs ± 3%    67.2µs ± 3%    ~     (p=0.149 n=40+40)
Revcomp-4                   1.84s ± 2%     1.86s ± 3%  +0.70%  (p=0.020 n=40+40)
Template-4                 69.0ms ± 4%    69.8ms ± 3%  +1.20%  (p=0.003 n=40+40)
TimeParse-4                 438ns ± 3%     439ns ± 4%    ~     (p=0.650 n=40+40)
TimeFormat-4                412ns ± 3%     412ns ± 3%    ~     (p=0.888 n=40+40)
[Geo mean]                 65.2µs         65.2µs       -0.04%

name                     old speed      new speed      delta
GobDecode-4               108MB/s ± 6%   108MB/s ± 6%    ~     (p=0.855 n=40+40)
GobEncode-4               112MB/s ± 9%   111MB/s ± 8%    ~     (p=0.159 n=40+40)
Gzip-4                   49.2MB/s ± 4%  49.1MB/s ± 3%    ~     (p=0.102 n=40+40)
Gunzip-4                  474MB/s ± 3%   472MB/s ± 3%    ~     (p=0.063 n=40+40)
JSONEncode-4              121MB/s ± 3%   123MB/s ± 3%  +1.62%  (p=0.001 n=40+40)
JSONDecode-4             31.9MB/s ± 3%  31.6MB/s ± 4%    ~     (p=0.070 n=40+40)
GoParse-4                17.9MB/s ± 2%  17.9MB/s ± 3%    ~     (p=0.696 n=40+40)
RegexpMatchEasy0_32-4     355MB/s ± 3%   358MB/s ± 5%  +0.99%  (p=0.002 n=40+40)
RegexpMatchEasy0_1K-4    1.26GB/s ± 3%  1.26GB/s ± 3%    ~     (p=0.381 n=40+40)
RegexpMatchEasy1_32-4     310MB/s ± 5%   310MB/s ± 4%    ~     (p=0.655 n=40+40)
RegexpMatchEasy1_1K-4    1.01GB/s ± 4%  1.01GB/s ± 3%    ~     (p=0.351 n=40+33)
RegexpMatchMedium_32-4   8.32MB/s ± 4%  8.34MB/s ± 5%    ~     (p=0.696 n=40+40)
RegexpMatchMedium_1K-4   25.6MB/s ± 3%  25.9MB/s ± 4%  +1.36%  (p=0.000 n=40+40)
RegexpMatchHard_32-4     14.1MB/s ± 6%  14.3MB/s ± 4%  +1.64%  (p=0.011 n=40+40)
RegexpMatchHard_1K-4     15.2MB/s ± 3%  15.2MB/s ± 3%    ~     (p=0.147 n=40+40)
Revcomp-4                 138MB/s ± 2%   137MB/s ± 3%  -0.70%  (p=0.021 n=40+40)
Template-4               28.1MB/s ± 4%  27.8MB/s ± 3%  -1.19%  (p=0.003 n=40+40)
[Geo mean]               83.7MB/s       83.7MB/s       +0.03%

Change-Id: I2a2b3a942b5c45467491515d201179fd192e65c9
Reviewed-on: https://go-review.googlesource.com/c/141650
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
2018-10-16 07:17:11 +00:00
Ben Shi
3785be3093 test/codegen: fix confusing test cases
ARMv7's MULAF/MULSF/MULAD/MULSD are not fused,
this CL fixes the confusing test cases.

Change-Id: I35022e207e2f0d24a23a7f6f188e41ba8eee9886
Reviewed-on: https://go-review.googlesource.com/c/142439
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Akhil Indurti <aindurti@gmail.com>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
2018-10-16 07:17:02 +00:00
Daniel Martí
7f3313133e cmd/compile: don't panic on invalid map key declarations
In golang.org/cl/75310, the compiler's typechecker was changed so that
map key types were validated at a later stage, to make sure that all the
necessary type information was present.

This still worked for map type declarations, but caused a regression for
top-level map variable declarations. These now caused a fatal panic
instead of a typechecking error.

The cause was that checkMapKeys was run too early, before all
typechecking was done. In particular, top-level map variable
declarations are typechecked as external declarations, much later than
where checkMapKeys was run.

Add a test case for both exported and unexported top-level map
declarations, and add a second call to checkMapKeys at the actual end of
typechecking. Simply moving the one call isn't a good solution either;
the comments expand on that.

Fixes #28058.

Change-Id: Ia5febb01a1d877447cf66ba44fb49a7e0f4f18a5
Reviewed-on: https://go-review.googlesource.com/c/140417
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
2018-10-15 22:11:26 +00:00
Martin Möhrmann
a0f57c3fd0 cmd/compile: avoid string allocations when map key is struct or array literal
x = map[string(byteslice)] is already optimized by the compiler to avoid a
string allocation. This CL generalizes this optimization to:

x = map[T1{ ... Tn{..., string(byteslice), ...} ... }]
where T1 to Tn is a nesting of struct and array literals.

Found in a hot code path that used a struct of strings made from []byte
slices to make a map lookup.

There are no uses of the more generalized optimization in the standard library.
Passes toolstash -cmp.

MapStringConversion/32/simple    21.9ns ± 2%    21.9ns ± 3%      ~     (p=0.995 n=17+20)
MapStringConversion/32/struct    28.8ns ± 3%    22.0ns ± 2%   -23.80%  (p=0.000 n=20+20)
MapStringConversion/32/array     28.5ns ± 2%    21.9ns ± 2%   -23.14%  (p=0.000 n=19+16)
MapStringConversion/64/simple    21.0ns ± 2%    21.1ns ± 3%      ~     (p=0.072 n=19+18)
MapStringConversion/64/struct    72.4ns ± 3%    21.3ns ± 2%   -70.53%  (p=0.000 n=20+20)
MapStringConversion/64/array     72.8ns ± 1%    21.0ns ± 2%   -71.13%  (p=0.000 n=17+19)

name                           old allocs/op  new allocs/op  delta
MapStringConversion/32/simple      0.00           0.00           ~     (all equal)
MapStringConversion/32/struct      0.00           0.00           ~     (all equal)
MapStringConversion/32/array       0.00           0.00           ~     (all equal)
MapStringConversion/64/simple      0.00           0.00           ~     (all equal)
MapStringConversion/64/struct      1.00 ± 0%      0.00       -100.00%  (p=0.000 n=20+20)
MapStringConversion/64/array       1.00 ± 0%      0.00       -100.00%  (p=0.000 n=20+20)

Change-Id: I483b4d84d8d74b1025b62c954da9a365e79b7a3a
Reviewed-on: https://go-review.googlesource.com/c/116275
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
2018-10-15 19:22:07 +00:00
Alberto Donizetti
7c96d87eda test/codegen: test ppc64 TrailingZeros, OnesCount codegen
This change adds codegen tests for the intrinsification on ppc64 of
the OnesCount{64,32,16,8}, and TrailingZeros{64,32,16,8} math/bits
functions.

Change-Id: Id3364921fbd18316850e15c8c71330c906187fdb
Reviewed-on: https://go-review.googlesource.com/c/141897
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
2018-10-15 16:53:03 +00:00
Keith Randall
63e964e174 cmd/compile: provide types for all order-allocated temporaries
Ensure that we correctly type the stack temps for regular closures,
method function closures, and slice literals.

Then we don't need to override the dummy types later.
Furthermore, this allows order to reuse temporaries of these types.

OARRAYLIT doesn't need a temporary as far as I can tell, so I
removed that case from order.

Change-Id: Ic58520fa50c90639393ff78f33d3c831d5c4acb9
Reviewed-on: https://go-review.googlesource.com/c/140306
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-15 16:07:52 +00:00
Ben Shi
93e27e01af test/codegen: add tests of FMA for arm/arm64
This CL adds tests of fused multiplication-accumulation
on arm/arm64.

Change-Id: Ic85d5277c0d6acb7e1e723653372dfaf96824a39
Reviewed-on: https://go-review.googlesource.com/c/141652
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-15 14:51:30 +00:00
Ben Shi
c3208842e1 test/codegen: add tests for multiplication-subtraction
This CL adds tests for armv7's MULS and arm64's MSUBW.

Change-Id: Id0fd5d26fd477e4ed14389b0d33cad930423eb5b
Reviewed-on: https://go-review.googlesource.com/c/141651
Run-TryBot: Ben Shi <powerman1st@163.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
2018-10-15 02:41:33 +00:00
Keith Randall
389e942745 cmd/compile: reuse temporaries in order pass
Instead of allocating a new temporary each time one
is needed, keep a list of temporaries which are free
(have already been VARKILLed on every path) and use
one of them.

Should save a lot of stack space. In a function like this:

func main() {
     fmt.Printf("%d %d\n", 2, 3)
     fmt.Printf("%d %d\n", 4, 5)
     fmt.Printf("%d %d\n", 6, 7)
}

The three [2]interface{} arrays used to hold the ... args
all use the same autotmp, instead of 3 different autotmps
as happened previous to this CL.

Change-Id: I2d728e226f81e05ae68ca8247af62014a1b032d3
Reviewed-on: https://go-review.googlesource.com/c/140301
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-14 05:21:00 +00:00
Keith Randall
0e9f8a21f8 runtime,cmd/compile: pass strings and slices to convT2{E,I} by value
When we pass these types by reference, we usually have to allocate
temporaries on the stack, initialize them, then pass their address
to the conversion functions. It's simpler to pass these types
directly by value.

This particularly applies to conversions needed for fmt.Printf
(to interface{} for constructing a [...]interface{}).

func f(a, b, c string) {
     fmt.Printf("%s %s\n", a, b)
     fmt.Printf("%s %s\n", b, c)
}

This function's stack frame shrinks from 200 to 136 bytes, and
its code shrinks from 535 to 453 bytes.

The go binary shrinks 0.3%.

Update #24286

Aside: for this function f, we don't really need to allocate
temporaries for the convT2E function. We could use the address
of a, b, and c directly. That might get similar (or maybe better?)
improvements. I investigated a bit, but it seemed complicated
to do it safely. This change was much easier.

Change-Id: I78cbe51b501fb41e1e324ce4203f0de56a1db82d
Reviewed-on: https://go-review.googlesource.com/c/135377
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
2018-10-14 03:46:51 +00:00
Keith Randall
653a4bd8d4 cmd/compile: optimize loads from readonly globals into constants
Instead of
   MOVB go.string."foo"(SB), AX
do
   MOVB $102, AX

When we know the global we're loading from is readonly, we can
do that read at compile time.

I've made this arch-dependent mostly because the cases where this
happens often are memory->memory moves, and those don't get
decomposed until lowering.

Did amd64/386/arm/arm64. Other architectures could follow.

Update #26498

Change-Id: I41b1dc831b2cd0a52dac9b97f4f4457888a46389
Reviewed-on: https://go-review.googlesource.com/c/141118
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
2018-10-14 02:54:40 +00:00
Ben Shi
bac6a2925c test/codegen: add more arm64 test cases
This CL adds 3 combined load test cases for arm64.

Change-Id: I2c67308c40fd8a18f9f2d16c6d12911dcdc583e2
Reviewed-on: https://go-review.googlesource.com/c/140700
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
2018-10-11 15:14:06 +00:00
Ben Shi
27965c1436 cmd/compile: optimize 386's ADDLconstmodifyidx4
This CL optimize ADDLconstmodifyidx4 to INCL/DECL, when the
constant is +1/-1.

1. The total size of pkg/linux_386/ decreases 28 bytes, excluding
cmd/compile.

2. There is no regression in the go1 benchmark test, excluding noise.
name                     old time/op    new time/op    delta
BinaryTree17-4              3.25s ± 2%     3.23s ± 3%  -0.70%  (p=0.040 n=30+30)
Fannkuch11-4                3.50s ± 1%     3.47s ± 1%  -0.68%  (p=0.000 n=30+30)
FmtFprintfEmpty-4          44.6ns ± 3%    44.8ns ± 3%  +0.46%  (p=0.029 n=30+30)
FmtFprintfString-4         79.0ns ± 3%    78.7ns ± 3%    ~     (p=0.053 n=30+30)
FmtFprintfInt-4            89.2ns ± 2%    89.4ns ± 3%    ~     (p=0.665 n=30+29)
FmtFprintfIntInt-4          142ns ± 3%     142ns ± 3%    ~     (p=0.435 n=30+30)
FmtFprintfPrefixedInt-4     182ns ± 2%     182ns ± 2%    ~     (p=0.964 n=30+30)
FmtFprintfFloat-4           407ns ± 3%     411ns ± 4%    ~     (p=0.080 n=30+30)
FmtManyArgs-4               597ns ± 3%     593ns ± 4%    ~     (p=0.222 n=30+30)
GobDecode-4                7.09ms ± 6%    7.07ms ± 7%    ~     (p=0.633 n=30+30)
GobEncode-4                6.81ms ± 9%    6.81ms ± 8%    ~     (p=0.982 n=30+30)
Gzip-4                      398ms ± 4%     400ms ± 6%    ~     (p=0.177 n=30+30)
Gunzip-4                   41.3ms ± 3%    40.6ms ± 4%  -1.71%  (p=0.005 n=30+30)
HTTPClientServer-4         63.4µs ± 3%    63.4µs ± 4%    ~     (p=0.646 n=30+28)
JSONEncode-4               16.0ms ± 3%    16.1ms ± 3%    ~     (p=0.057 n=30+30)
JSONDecode-4               63.3ms ± 8%    63.1ms ± 7%    ~     (p=0.786 n=30+30)
Mandelbrot200-4            5.17ms ± 3%    5.15ms ± 8%    ~     (p=0.654 n=30+30)
GoParse-4                  3.24ms ± 3%    3.23ms ± 2%    ~     (p=0.091 n=30+30)
RegexpMatchEasy0_32-4       103ns ± 4%     103ns ± 4%    ~     (p=0.575 n=30+30)
RegexpMatchEasy0_1K-4       823ns ± 2%     821ns ± 3%    ~     (p=0.827 n=30+30)
RegexpMatchEasy1_32-4       113ns ± 3%     112ns ± 3%    ~     (p=0.076 n=30+30)
RegexpMatchEasy1_1K-4      1.02µs ± 4%    1.01µs ± 5%    ~     (p=0.087 n=30+30)
RegexpMatchMedium_32-4      129ns ± 3%     127ns ± 4%  -1.55%  (p=0.009 n=30+30)
RegexpMatchMedium_1K-4     39.3µs ± 4%    39.7µs ± 3%    ~     (p=0.054 n=30+30)
RegexpMatchHard_32-4       2.15µs ± 4%    2.15µs ± 4%    ~     (p=0.712 n=30+30)
RegexpMatchHard_1K-4       66.0µs ± 3%    65.1µs ± 3%  -1.32%  (p=0.002 n=30+30)
Revcomp-4                   1.85s ± 2%     1.85s ± 3%    ~     (p=0.168 n=30+30)
Template-4                 69.5ms ± 7%    68.9ms ± 6%    ~     (p=0.250 n=28+28)
TimeParse-4                 434ns ± 3%     432ns ± 4%    ~     (p=0.629 n=30+30)
TimeFormat-4                403ns ± 4%     408ns ± 3%  +1.23%  (p=0.019 n=30+29)
[Geo mean]                 65.5µs         65.3µs       -0.20%

name                     old speed      new speed      delta
GobDecode-4               108MB/s ± 6%   109MB/s ± 6%    ~     (p=0.636 n=30+30)
GobEncode-4               113MB/s ±10%   113MB/s ± 9%    ~     (p=0.982 n=30+30)
Gzip-4                   48.8MB/s ± 4%  48.6MB/s ± 5%    ~     (p=0.178 n=30+30)
Gunzip-4                  470MB/s ± 3%   479MB/s ± 4%  +1.72%  (p=0.006 n=30+30)
JSONEncode-4              121MB/s ± 3%   120MB/s ± 3%    ~     (p=0.057 n=30+30)
JSONDecode-4             30.7MB/s ± 8%  30.8MB/s ± 8%    ~     (p=0.784 n=30+30)
GoParse-4                17.9MB/s ± 3%  17.9MB/s ± 2%    ~     (p=0.090 n=30+30)
RegexpMatchEasy0_32-4     309MB/s ± 4%   309MB/s ± 3%    ~     (p=0.530 n=30+30)
RegexpMatchEasy0_1K-4    1.24GB/s ± 2%  1.25GB/s ± 3%    ~     (p=0.976 n=30+30)
RegexpMatchEasy1_32-4     282MB/s ± 3%   284MB/s ± 3%  +0.81%  (p=0.041 n=30+30)
RegexpMatchEasy1_1K-4    1.00GB/s ± 3%  1.01GB/s ± 4%    ~     (p=0.091 n=30+30)
RegexpMatchMedium_32-4   7.71MB/s ± 3%  7.84MB/s ± 4%  +1.71%  (p=0.000 n=30+30)
RegexpMatchMedium_1K-4   26.1MB/s ± 4%  25.8MB/s ± 3%    ~     (p=0.051 n=30+30)
RegexpMatchHard_32-4     14.9MB/s ± 4%  14.9MB/s ± 4%    ~     (p=0.712 n=30+30)
RegexpMatchHard_1K-4     15.5MB/s ± 3%  15.7MB/s ± 3%  +1.34%  (p=0.003 n=30+30)
Revcomp-4                 138MB/s ± 2%   137MB/s ± 3%    ~     (p=0.174 n=30+30)
Template-4               28.0MB/s ± 6%  28.2MB/s ± 6%    ~     (p=0.251 n=28+28)
[Geo mean]               82.3MB/s       82.6MB/s       +0.36%

Change-Id: I389829699ffe9500a013fcf31be58a97e98043e1
Reviewed-on: https://go-review.googlesource.com/c/140701
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
2018-10-11 01:20:34 +00:00
Keith Randall
ceb0c371d9 cmd/compile: make []byte("...") more efficient
Do []byte(string) conversions more efficiently when the string
is a constant. Instead of calling stringtobyteslice, allocate
just the space we need and encode the initialization directly.

[]byte("foo") rewrites to the following pseudocode:

var s [3]byte // on heap or stack, depending on whether b escapes
s = *(*[3]byte)(&"foo"[0]) // initialize s from the string
b = s[:]

which generates this assembly:

	0x001d 00029 (tmp1.go:9)	LEAQ	type.[3]uint8(SB), AX
	0x0024 00036 (tmp1.go:9)	MOVQ	AX, (SP)
	0x0028 00040 (tmp1.go:9)	CALL	runtime.newobject(SB)
	0x002d 00045 (tmp1.go:9)	MOVQ	8(SP), AX
	0x0032 00050 (tmp1.go:9)	MOVBLZX	go.string."foo"+2(SB), CX
	0x0039 00057 (tmp1.go:9)	MOVWLZX	go.string."foo"(SB), DX
	0x0040 00064 (tmp1.go:9)	MOVW	DX, (AX)
	0x0043 00067 (tmp1.go:9)	MOVB	CL, 2(AX)
// Then the slice is b = {AX, 3, 3}

The generated code is still not optimal, as it still does load/store
from read-only memory instead of constant stores.  Next CL...

Update #26498
Fixes #10170

Change-Id: I4b990b19f9a308f60c8f4f148934acffefe0a5bd
Reviewed-on: https://go-review.googlesource.com/c/140698
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
2018-10-10 16:10:40 +00:00
Ben Shi
3933302550 cmd/compile: add indexed form for several 386 instructions
This CL implements indexed memory operands for the following instructions.
(ADD|SUB|MUL|AND|OR|XOR)Lload -> (ADD|SUB|MUL|AND|OR|XOR)Lloadidx4
(ADD|SUB|AND|OR|XOR)Lmodify -> (ADD|SUB|AND|OR|XOR)Lmodifyidx4
(ADD|AND|OR|XOR)Lconstmodify -> (ADD|AND|OR|XOR)Lconstmodifyidx4

1. The total size of pkg/linux_386/ decreases about 2.5KB, excluding
cmd/compile/ .

2. There is little regression in the go1 benchmark test, excluding noise.
name                     old time/op    new time/op    delta
BinaryTree17-4              3.25s ± 3%     3.25s ± 3%    ~     (p=0.218 n=40+40)
Fannkuch11-4                3.53s ± 1%     3.53s ± 1%    ~     (p=0.303 n=40+40)
FmtFprintfEmpty-4          44.9ns ± 3%    45.6ns ± 3%  +1.48%  (p=0.030 n=40+36)
FmtFprintfString-4         78.7ns ± 5%    80.1ns ± 7%    ~     (p=0.217 n=36+40)
FmtFprintfInt-4            90.2ns ± 6%    89.8ns ± 5%    ~     (p=0.659 n=40+38)
FmtFprintfIntInt-4          140ns ± 5%     141ns ± 5%  +1.00%  (p=0.027 n=40+40)
FmtFprintfPrefixedInt-4     185ns ± 3%     183ns ± 3%    ~     (p=0.104 n=40+40)
FmtFprintfFloat-4           411ns ± 4%     406ns ± 3%  -1.37%  (p=0.005 n=40+40)
FmtManyArgs-4               590ns ± 4%     598ns ± 4%  +1.35%  (p=0.008 n=40+40)
GobDecode-4                7.16ms ± 5%    7.10ms ± 5%    ~     (p=0.335 n=40+40)
GobEncode-4                6.85ms ± 7%    6.74ms ± 9%    ~     (p=0.058 n=38+40)
Gzip-4                      400ms ± 4%     399ms ± 2%  -0.34%  (p=0.003 n=40+33)
Gunzip-4                   41.4ms ± 3%    41.4ms ± 4%  -0.12%  (p=0.020 n=40+40)
HTTPClientServer-4         64.1µs ± 4%    63.5µs ± 2%  -1.07%  (p=0.000 n=39+37)
JSONEncode-4               15.9ms ± 2%    15.9ms ± 3%    ~     (p=0.103 n=40+40)
JSONDecode-4               62.2ms ± 4%    61.6ms ± 3%  -0.98%  (p=0.006 n=39+40)
Mandelbrot200-4            5.18ms ± 3%    5.14ms ± 4%    ~     (p=0.125 n=40+40)
GoParse-4                  3.29ms ± 2%    3.27ms ± 2%  -0.66%  (p=0.006 n=40+40)
RegexpMatchEasy0_32-4       103ns ± 4%     103ns ± 4%    ~     (p=0.632 n=40+40)
RegexpMatchEasy0_1K-4       830ns ± 3%     828ns ± 3%    ~     (p=0.563 n=40+40)
RegexpMatchEasy1_32-4       113ns ± 4%     113ns ± 4%    ~     (p=0.494 n=40+40)
RegexpMatchEasy1_1K-4      1.03µs ± 4%    1.03µs ± 4%    ~     (p=0.665 n=40+40)
RegexpMatchMedium_32-4      130ns ± 4%     129ns ± 3%    ~     (p=0.458 n=40+40)
RegexpMatchMedium_1K-4     39.4µs ± 3%    39.7µs ± 3%    ~     (p=0.825 n=40+40)
RegexpMatchHard_32-4       2.16µs ± 4%    2.15µs ± 4%    ~     (p=0.137 n=40+40)
RegexpMatchHard_1K-4       65.2µs ± 3%    65.4µs ± 4%    ~     (p=0.160 n=40+40)
Revcomp-4                   1.87s ± 2%     1.87s ± 1%  +0.17%  (p=0.019 n=33+33)
Template-4                 69.4ms ± 3%    69.8ms ± 3%  +0.60%  (p=0.009 n=40+40)
TimeParse-4                 437ns ± 4%     438ns ± 4%    ~     (p=0.234 n=40+40)
TimeFormat-4                408ns ± 3%     408ns ± 3%    ~     (p=0.904 n=40+40)
[Geo mean]                 65.7µs         65.6µs       -0.08%

name                     old speed      new speed      delta
GobDecode-4               107MB/s ± 5%   108MB/s ± 5%    ~     (p=0.336 n=40+40)
GobEncode-4               112MB/s ± 6%   114MB/s ± 9%  +1.95%  (p=0.036 n=37+40)
Gzip-4                   48.5MB/s ± 4%  48.6MB/s ± 2%  +0.28%  (p=0.003 n=40+33)
Gunzip-4                  469MB/s ± 4%   469MB/s ± 4%  +0.11%  (p=0.021 n=40+40)
JSONEncode-4              122MB/s ± 2%   122MB/s ± 3%    ~     (p=0.105 n=40+40)
JSONDecode-4             31.2MB/s ± 4%  31.5MB/s ± 4%  +0.99%  (p=0.007 n=39+40)
GoParse-4                17.6MB/s ± 2%  17.7MB/s ± 2%  +0.66%  (p=0.007 n=40+40)
RegexpMatchEasy0_32-4     310MB/s ± 4%   310MB/s ± 4%    ~     (p=0.384 n=40+40)
RegexpMatchEasy0_1K-4    1.23GB/s ± 3%  1.24GB/s ± 3%    ~     (p=0.186 n=40+40)
RegexpMatchEasy1_32-4     283MB/s ± 3%   281MB/s ± 4%    ~     (p=0.855 n=40+40)
RegexpMatchEasy1_1K-4    1.00GB/s ± 4%  1.00GB/s ± 4%    ~     (p=0.665 n=40+40)
RegexpMatchMedium_32-4   7.68MB/s ± 4%  7.73MB/s ± 3%    ~     (p=0.359 n=40+40)
RegexpMatchMedium_1K-4   26.0MB/s ± 3%  25.8MB/s ± 3%    ~     (p=0.825 n=40+40)
RegexpMatchHard_32-4     14.8MB/s ± 3%  14.9MB/s ± 4%    ~     (p=0.136 n=40+40)
RegexpMatchHard_1K-4     15.7MB/s ± 3%  15.7MB/s ± 4%    ~     (p=0.150 n=40+40)
Revcomp-4                 136MB/s ± 1%   136MB/s ± 1%  -0.09%  (p=0.028 n=32+33)
Template-4               28.0MB/s ± 3%  27.8MB/s ± 3%  -0.59%  (p=0.010 n=40+40)
[Geo mean]               82.1MB/s       82.3MB/s       +0.25%

Change-Id: Ifa387a251056678326d3508aa02753b70bf7e5d0
Reviewed-on: https://go-review.googlesource.com/c/140303
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
2018-10-09 03:55:08 +00:00
Igor Zhilianin
04dc1b2443 all: fix a bunch of misspellings
Change-Id: I94cebca86706e072fbe3be782d3edbe0e22b9432
GitHub-Last-Rev: 8e15a40545
GitHub-Pull-Request: golang/go#28067
Reviewed-on: https://go-review.googlesource.com/c/140437
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
2018-10-08 03:12:03 +00:00
Keith Randall
6933d76a7e cmd/compile: allow VARDEF at top level
This was missed as part of adding a top-level VARDEF
for stack tracing (CL 134156).

Fixes #28055

Change-Id: Id14748dfccb119197d788867d2ec6a3b3c9835cf
Reviewed-on: https://go-review.googlesource.com/c/140304
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
2018-10-06 16:28:04 +00:00
Igor Zhilianin
f90e89e675 all: fix a bunch of misspellings
Change-Id: If2954bdfc551515403706b2cd0dde94e45936e08
GitHub-Last-Rev: d4cfc41a55
GitHub-Pull-Request: golang/go#28049
Reviewed-on: https://go-review.googlesource.com/c/140299
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
2018-10-06 15:40:03 +00:00
uropek
f1973f3164 test: fix spelling of caught be the compiler to caught by the compiler
Change-Id: Id21cdce35963dcdb96cc06252170590224c5aa17
GitHub-Last-Rev: 429dad0ceb
GitHub-Pull-Request: golang/go#28000
Reviewed-on: https://go-review.googlesource.com/c/139424
Reviewed-by: Ian Lance Taylor <iant@golang.org>
2018-10-04 00:49:49 +00:00
Keith Randall
c91ce3cc7b test: stress test for stack objects
Allocate a long linked list on the stack. This tests both
lots of live stack objects, and lots of intra-stack pointers
to those objects.

Change-Id: I169e067416455737774851633b1e5367e10e1cf2
Reviewed-on: https://go-review.googlesource.com/c/135296
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-03 19:54:29 +00:00
Keith Randall
9dac0a8132 runtime: on a signal, set traceback address to a deferreturn call
When a function triggers a signal (like a segfault which translates to
a nil pointer exception) during execution, a sigpanic handler is just
below it on the stack.  The function itself did not stop at a
safepoint, so we have to figure out what safepoint we should use to
scan its stack frame.

Previously we used the site of the most recent defer to get the live
variables at the signal site. That answer is not quite correct, as
explained in #27518. Instead, use the site of a deferreturn call.
It has all the right variables marked as live (no args, all the return
values, except those that escape to the heap, in which case the
corresponding PAUTOHEAP variables will be live instead).

This CL requires stack objects, so that all the local variables
and args referenced by the deferred closures keep the right variables alive.

Fixes #27518

Change-Id: Id45d8a8666759986c203181090b962e2981e48ca
Reviewed-on: https://go-review.googlesource.com/c/134637
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-03 19:54:23 +00:00
Keith Randall
9a8372f8bd cmd/compile,runtime: remove ambiguously live logic
The previous CL introduced stack objects. This CL removes the old
ambiguously live liveness analysis. After this CL we're relying
on stack objects exclusively.

Update a bunch of liveness tests to reflect the new world.

Fixes #22350

Change-Id: I739b26e015882231011ce6bc1a7f426049e59f31
Reviewed-on: https://go-review.googlesource.com/c/134156
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2018-10-03 19:54:16 +00:00
Cherry Zhang
c96e3bcc97 cmd/compile: fix type of OffPtr in some optimization rules
In some optimization rules the type of generated OffPtr was
incorrectly set to the type of the pointee, instead of the
pointer. When the OffPtr value is spilled, this may generate
a spill of the wrong type, e.g. a floating point spill of an
integer (pointer) value. On Wasm, this leads to invalid
bytecode.

Fixes #27961.

Change-Id: I5d464847eb900ed90794105c0013a1a7330756cc
Reviewed-on: https://go-review.googlesource.com/c/139257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
2018-10-03 15:01:47 +00:00
Carlos Eduardo Seo
9aed4cc395 cmd/compile: instrinsify math/bits.Mul on ppc64x
Add SSA rules to intrinsify Mul/Mul64 on ppc64x.

benchmark             old ns/op     new ns/op     delta
BenchmarkMul-40       8.80          0.93          -89.43%
BenchmarkMul32-40     1.39          1.39          +0.00%
BenchmarkMul64-40     5.39          0.93          -82.75%

Updates #24813

Change-Id: I6e95bfbe976a2278bd17799df184a7fbc0e57829
Reviewed-on: https://go-review.googlesource.com/138917
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
2018-10-02 18:56:06 +00:00