Functions exported on behalf of other packages need to have their
argument stack maps specified explicitly. They don't get an implicit
map because they are not in the local package, and if they get defer'd
they need argument maps.
Fixes#24419
Change-Id: I35b7d8b4a03d4770ba88699e1007cb3fcb5397a9
Reviewed-on: https://go-review.googlesource.com/122676
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
More test cases of combined load for arm64.
Change-Id: I7a9f4dcec6930f161cbded1f47dbf7fcef1db4f1
Reviewed-on: https://go-review.googlesource.com/122582
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When DWARF is disabled, some alg functions were not generated.
Make sure they are generated when we about to generate calls to
them.
Fixes#23546.
Change-Id: Iecfa0eea830e42ee92e55268167cefb1540980b2
Reviewed-on: https://go-review.googlesource.com/122403
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
We need to make sure that the terminating comparison has the right
sense given the increment direction. If the increment is positive,
the terminating comparsion must be < or <=. If the increment is
negative, the terminating comparison must be > or >=.
Do a few cleanups, like constant-folding entry==0, adding comments,
removing unused "exported" fields.
Fixes#26116
Change-Id: I14230ee8126054b750e2a1f2b18eb8f09873dbd5
Reviewed-on: https://go-review.googlesource.com/121940
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Expanding interface method sets is handled during width calculation,
which can't be performed concurrently. Make sure that we eagerly
expand interfaces in the frontend when importing them, even if they're
not actually used by code, because we might need to generate a type
description of them.
Fixes#25055.
Change-Id: I6fd2756de2c7d5dbc33056f70b3028ca3aebab41
Reviewed-on: https://go-review.googlesource.com/122517
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Late opt pass may generate dead stores, which messes up store
chain calculation in later passes. Run generic deadcode even
in -N mode to remove them.
Fixes#26163.
Change-Id: I8276101717bb978d5980e6c7998f53fd8d0ae10f
Reviewed-on: https://go-review.googlesource.com/121856
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
If the address of an auto reaches a phi then any further stores to
the pointer represented by the phi probably need to be kept. This
is because stores to the other arguments to the phi may be visible
to the program.
Fixes#26153.
Change-Id: Ic506c6c543bf70d792e5b1a64bdde1e5fdf1126a
Reviewed-on: https://go-review.googlesource.com/121796
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This reverts commit 1a27f048ad.
Reason for revert: Broke the ssacheck and -N-l builders, and the -N-l fix looks like it will take some time and take a different route entirely.
Change-Id: Ie0ac5e86ab7d72a303dfbbc48dfdf1e092d4f61a
Reviewed-on: https://go-review.googlesource.com/121715
Reviewed-by: David Chase <drchase@google.com>
Given a carefully constructed input, writebarrier would
split a block with the OpAddr in the first half and the
VarDef in the second half which ultimately leads to a
compiler crash because the scheduler is no longer able
to put them in the proper order.
To fix, recognize the implicit dependence of OpAddr on
the VarDef of the same symbol if any exists.
This fix was chosen over making OpAddr take a memory
operand to make the dependence explicit, because this
change is less invasive at this late part of the 1.11
release cycle.
Fixes#26105.
Change-Id: I9b65460673af3af41740ef877d2fca91acd336bc
Reviewed-on: https://go-review.googlesource.com/121436
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
SSA can handle 1-element array, but only when the element type
is SSAable. When building SSA for INDEX of 1-element array, we
did not check the element type is SSAable. And when it's not,
it resulted in an unhandled SSA op.
Fixes#26120.
Change-Id: Id709996b5d9d90212f6c56d3f27eed320a4d8360
Reviewed-on: https://go-review.googlesource.com/121496
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Code generation for OpAMD64CMOV[WLQ]EQF uses AX as a scratch register,
but only CMOVQEQF, correctly lets compiler know. Mark other 2 as
clobbering AX.
Fixes#26097
Change-Id: I2a65bd67bf18a540898b4a0ae6c8766e0b767b19
Reviewed-on: https://go-review.googlesource.com/121336
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
On Wasm, the offset was not folded into LoweredAddr, so it was
not rematerializeable. This led to the address-taken operation
in some cases generated too early, before the local variable
becoming live. The liveness code thinks the variable live when
the address is taken, then backs it up to live at function
entry, then complains about it, because nothing other than
arguments should be live on entry.
This CL folds the offset into the address operation, so it is
rematerializeable and so generated right before use, after the
variable actually becomes live.
It might be possible to relax the liveness code not to think a
variable live when its address being taken, but until the address
actually being used. But it would be quite complicated. As we're
late in Go 1.11 freeze, it would be better not to do it. Also,
I think the address operation is rematerializeable now on all
architectures, so this is probably less necessary.
This may also be a slight optimization, as the address+offset is
now rematerializeable, which can be generated on the Wasm stack,
without using any "registers" which are emulated by local
variables on Wasm. I don't know how to do benchmarks on Wasm. At
least, cmd/go binary size shrinks 9K.
Fixes#25966.
Change-Id: I01e5869515d6a3942fccdcb857f924a866876e57
Reviewed-on: https://go-review.googlesource.com/120599
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
For non-unit increment, loopbce checks to see if the
increment evenly divides the difference between (constant)
loop start and end. This test panics when the increment
is zero.
Fix: check for zero, if found, don't optimize the loop.
Also added missing copyright notice to loopbce.go.
Fixes#26043.
Change-Id: I5f460104879cacc94481949234c9ce8c519d6380
Reviewed-on: https://go-review.googlesource.com/120759
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If expanding an inline function body required lazily expanding a
package-scoped type whose identifier was shadowed within the function
body, the lazy expansion would instead overwrite the local symbol
definition instead of the package-scoped symbol. This was due to
importsym using s.Def instead of s.PkgDef.
Unfortunately, this is yet another consequence of the current awkward
scope handling code.
Passes toolstash-check.
Fixes#25984.
Change-Id: Ia7033e1749a883e6e979c854d4b12b0b28083dd8
Reviewed-on: https://go-review.googlesource.com/120456
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
MOVWconst's AuxInt is Int32. SSA check complains if the AuxInt
does not fit in int32. Convert uint32 to int32 to make it happy.
The generated code is unchanged. MOVW only cares low 32 bits.
Passes "toolstash -cmp" std cmd for ARM.
Fixes#25993.
Change-Id: I2b6532c9c285ea6d89652505fb7c553f85a98864
Reviewed-on: https://go-review.googlesource.com/120335
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Adds the appropriate check to inl.go.
Includes tests of both -race+go:norace and plain go:norace.
Fixes#24651.
Change-Id: Id806342430c20baf4679a985d12eea3b677092e0
Reviewed-on: https://go-review.googlesource.com/119195
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Inlining of switch statements into a RETURNed expression
can sometimes lead to the switch being walked twice, which
results in a miscompiled switch statement. The bug depends
on:
1) multiple results
2) named results
3) a return statement whose expression includes a call to a
function containing a switch statement that is inlined.
It may also be significant that the default case of that
switch is a panic(), though that's not proven.
Rearranged the walk case for ORETURN so that double walks are
not possible. Added a test, because this is so fiddly.
Added a check against double walks, verified that it fires
w/o other fix.
Fixes#25776.
Change-Id: I2d594351fa082632512ef989af67eb887059729b
Reviewed-on: https://go-review.googlesource.com/118318
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Ensure that compiler error suggestions after case insensitive
field lookups don't mistakenly reported unexported fields if
those fields aren't in the local package being processed.
Fixes#25727
Change-Id: Icae84388c2a82c8cb539f3d43ad348f50a644caa
Reviewed-on: https://go-review.googlesource.com/117755
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The original fix (https://go-review.googlesource.com/c/go/+/35831)
for this issue was incorrect as it reported cycles in cases where
it shouldn't.
Instead, use a different approach: A type cycle containing aliases
is only a cycle if there are no type definitions. As soon as there
is a type definition, alias expansion terminates and there is no
cycle.
Approach: Split sprint_depchain into two non-recursive and more
easily understandable functions (cycleFor and cycleTrace),
and use those instead for cycle reporting. Analyze the cycle
returned by cycleFor before issueing an alias cycle error.
Also: Removed original fix (main.go) which introduced a separate
crash (#23823).
Fixes#18640.
Fixes#23823.
Fixes#24939.
Change-Id: Ic3707a9dec40a71dc928a3e49b4868c5fac3d3b7
Reviewed-on: https://go-review.googlesource.com/118078
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This line of the inlining tuning experiment
https://go-review.googlesource.com/c/go/+/109918/1/src/cmd/compile/internal/gc/inl.go#347
was incorrectly rewritten in a later patch to use the call
cost, not the panic cost, and thus the inlining of panic
didn't occur when it should. I discovered this when I
realized that tests should have failed, but didn't.
Fix is to make the correct change, and also to modify the
tests that this causes to fail. One test now asserts the
new normal, the other calls "ppanic" instead which is
designed to behave like panic but not be inlined.
Change-Id: I423bb7f08bd66a70d999826dd9b87027abf34cdf
Reviewed-on: https://go-review.googlesource.com/116656
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Every action has a short annotation.
The errorCheck function has a comment adapted from errchk script.
Removed redundant assigments to tmpDir.
Change-Id: Ifdd1284de046a0ce2aad26bd8da8a8e6a7707a8e
Reviewed-on: https://go-review.googlesource.com/115856
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The wasm archtecture was missing a rule to handle OffPtr with a
negative offset. This commit makes it so OffPtr always gets lowered
to I64AddConst.
Fixes#25741
Change-Id: I1d48e2954e3ff31deb8cba9a9bf0cab7c4bab71a
Reviewed-on: https://go-review.googlesource.com/116595
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
In the old binary export format, parameter names for parameter lists
which contained only types where never written, so this problem didn't
come up.
Fixes#25101.
Change-Id: Ia8b817f7f467570b05f88d584e86b6ef4acdccc6
Reviewed-on: https://go-review.googlesource.com/116376
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The stack frame includes the callee args section. At the point where
we were checking the frame size, that part of the frame had not been
computed yet. Move the check later so we can include the callee args size.
Fixes#20780
Update #25507
Change-Id: Iab97cb89b3a24f8ca19b9123ef2a111d6850c3fe
Reviewed-on: https://go-review.googlesource.com/115195
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Before the CL 115277 we did not run the test on Windows,
so let's just go back to not running the test on Windows.
There is nothing OS-specific about this test,
so skipping it on Windows doesn't seem like a big deal.
Updates #25693Fixes#25586
Change-Id: I1eb3e158b322d73e271ef388f8c6e2f2af0a0729
Reviewed-on: https://go-review.googlesource.com/115857
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL removes the rundircmpout action completely
because it is not used anywhere.
The run case already looks for output files. Rename the cmpout action
mentioned in tests to the run action and remove "cmpout" from run.go.
Change-Id: I835ceb70082927f8e9360e0ea0ba74f296363ab3
Reviewed-on: https://go-review.googlesource.com/115575
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
To allow testing of fixedbugs/bug345.go in Go,
a new flag -n is introduced. This flag disables setting
of relative path for local imports and imports search path
to current dir, namely -D . -I . are not passed to the compiler.
Error regexps are fixed to allow running the test in temp directory.
This change eliminates the last place where Perl
script "errchk" was used.
Fixes#25586.
Change-Id: If085f466e6955312d77315f96d3ef1cb68495aef
Reviewed-on: https://go-review.googlesource.com/115277
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When we deadcode-remove a block which is a write barrier test,
remove that block from the list of write barrier test blocks.
Fixes#25516
Change-Id: I1efe732d5476003eab4ad6bf67d0340d7874ff0c
Reviewed-on: https://go-review.googlesource.com/115037
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Extend stack frame limit of 1GB to include large argument/return areas.
Argument/return areas are part of the parent frame, not the frame itself,
so they need to be handled separately.
Fixes#25507.
Change-Id: I309298a58faee3e7c1dac80bd2f1166c82460087
Reviewed-on: https://go-review.googlesource.com/115036
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change enables bug248 to be tested with Go code.
For that, it adds a flag -1 to error check and run directory
with one package failing compilation prior the last package
which should be run.
Specifically, the "p" package in bug1.go file was renamed into "q"
to compile them in separate steps,
bug2.go and bug3.go files were reordered,
bug2.go was changed into non-main package.
Updates #25586.
Change-Id: Ie47aacd56ebb2ce4eac66c792d1a53e1e30e637c
Reviewed-on: https://go-review.googlesource.com/114818
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
1. Some incorrect test cases are disabled.
2. Some wrong test cases are corrected.
3. Some new test cases are added.
Change-Id: Ib5d0473d55159f233ddab79f96967eaec7b08597
Reviewed-on: https://go-review.googlesource.com/113736
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This modifies issafepoint in liveness analysis to report almost every
operation as a safe point. There are four things we don't mark as
safe-points:
1. Runtime code (other than at calls).
2. go:nosplit functions (other than at calls).
3. Instructions between the load of the write barrier-enabled flag and
the write.
4. Instructions leading up to a uintptr -> unsafe.Pointer conversion.
We'll optimize this in later CLs:
name old time/op new time/op delta
Template 185ms ± 2% 190ms ± 2% +2.95% (p=0.000 n=10+10)
Unicode 96.3ms ± 3% 96.4ms ± 1% ~ (p=0.905 n=10+9)
GoTypes 658ms ± 0% 669ms ± 1% +1.72% (p=0.000 n=10+9)
Compiler 3.14s ± 1% 3.18s ± 1% +1.56% (p=0.000 n=9+10)
SSA 7.41s ± 2% 7.59s ± 1% +2.48% (p=0.000 n=9+10)
Flate 126ms ± 1% 128ms ± 1% +2.08% (p=0.000 n=10+10)
GoParser 153ms ± 1% 157ms ± 2% +2.38% (p=0.000 n=10+10)
Reflect 437ms ± 1% 442ms ± 1% +0.98% (p=0.001 n=10+10)
Tar 178ms ± 1% 179ms ± 1% +0.67% (p=0.035 n=10+9)
XML 223ms ± 1% 229ms ± 1% +2.58% (p=0.000 n=10+10)
[Geo mean] 394ms 401ms +1.75%
No effect on binary size because we're not yet emitting these extra
safe points.
For #24543.
Change-Id: I16a1eebb9183cad7cef9d53c0fd21a973cad6859
Reviewed-on: https://go-review.googlesource.com/109348
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently, range loops over slices and arrays are compiled roughly
like:
for i, x := range s { b }
⇓
for i, _n, _p := 0, len(s), &s[0]; i < _n; i, _p = i+1, _p + unsafe.Sizeof(s[0]) { b }
⇓
i, _n, _p := 0, len(s), &s[0]
goto cond
body:
{ b }
i, _p = i+1, _p + unsafe.Sizeof(s[0])
cond:
if i < _n { goto body } else { goto end }
end:
The problem with this lowering is that _p may temporarily point past
the end of the allocation the moment before the loop terminates. Right
now this isn't a problem because there's never a safe-point during
this brief moment.
We're about to introduce safe-points everywhere, so this bad pointer
is going to be a problem. We could mark the increment as an unsafe
block, but this inhibits reordering opportunities and could result in
infrequent safe-points if the body is short.
Instead, this CL fixes this by changing how we compile range loops to
never produce this past-the-end pointer. It changes the lowering to
roughly:
i, _n, _p := 0, len(s), &s[0]
if i < _n { goto body } else { goto end }
top:
_p += unsafe.Sizeof(s[0])
body:
{ b }
i++
if i < _n { goto top } else { goto end }
end:
Notably, the increment is split into two parts: we increment the index
before checking the condition, but increment the pointer only *after*
the condition check has succeeded.
The implementation builds on the OFORUNTIL construct that was
introduced during the loop preemption experiments, since OFORUNTIL
places the increment and condition after the loop body. To support the
extra "late increment" step, we further define OFORUNTIL's "List"
field to contain the late increment statements. This makes all of this
a relatively small change.
This depends on the improvements to the prove pass in CL 102603. With
the current lowering, bounds-check elimination knows that i < _n in
the body because the body block is dominated by the cond block. In the
new lowering, deriving this fact requires detecting that i < _n on
*both* paths into body and hence is true in body. CL 102603 made prove
able to detect this.
The code size effect of this is minimal. The cmd/go binary on
linux/amd64 increases by 0.17%. Performance-wise, this actually
appears to be a net win, though it's mostly noise:
name old time/op new time/op delta
BinaryTree17-12 2.80s ± 0% 2.61s ± 1% -6.88% (p=0.000 n=20+18)
Fannkuch11-12 2.41s ± 0% 2.42s ± 0% +0.05% (p=0.005 n=20+20)
FmtFprintfEmpty-12 41.6ns ± 5% 41.4ns ± 6% ~ (p=0.765 n=20+19)
FmtFprintfString-12 69.4ns ± 3% 69.3ns ± 1% ~ (p=0.084 n=19+17)
FmtFprintfInt-12 76.1ns ± 1% 77.3ns ± 1% +1.57% (p=0.000 n=19+19)
FmtFprintfIntInt-12 122ns ± 2% 123ns ± 3% +0.95% (p=0.015 n=20+20)
FmtFprintfPrefixedInt-12 153ns ± 2% 151ns ± 3% -1.27% (p=0.013 n=20+20)
FmtFprintfFloat-12 215ns ± 0% 216ns ± 0% +0.47% (p=0.000 n=20+16)
FmtManyArgs-12 486ns ± 1% 498ns ± 0% +2.40% (p=0.000 n=20+17)
GobDecode-12 6.43ms ± 0% 6.50ms ± 0% +1.08% (p=0.000 n=18+19)
GobEncode-12 5.43ms ± 1% 5.47ms ± 0% +0.76% (p=0.000 n=20+20)
Gzip-12 218ms ± 1% 218ms ± 1% ~ (p=0.883 n=20+20)
Gunzip-12 38.8ms ± 0% 38.9ms ± 0% ~ (p=0.644 n=19+19)
HTTPClientServer-12 76.2µs ± 1% 76.4µs ± 2% ~ (p=0.218 n=20+20)
JSONEncode-12 12.2ms ± 0% 12.3ms ± 1% +0.45% (p=0.000 n=19+19)
JSONDecode-12 54.2ms ± 1% 53.3ms ± 0% -1.67% (p=0.000 n=20+20)
Mandelbrot200-12 3.71ms ± 0% 3.71ms ± 0% ~ (p=0.143 n=19+20)
GoParse-12 3.22ms ± 0% 3.19ms ± 1% -0.72% (p=0.000 n=20+20)
RegexpMatchEasy0_32-12 76.7ns ± 1% 75.8ns ± 1% -1.19% (p=0.000 n=20+17)
RegexpMatchEasy0_1K-12 245ns ± 1% 243ns ± 0% -0.72% (p=0.000 n=18+17)
RegexpMatchEasy1_32-12 71.9ns ± 0% 71.7ns ± 1% -0.39% (p=0.006 n=12+18)
RegexpMatchEasy1_1K-12 358ns ± 1% 354ns ± 1% -1.13% (p=0.000 n=20+19)
RegexpMatchMedium_32-12 105ns ± 2% 105ns ± 1% -0.63% (p=0.007 n=19+20)
RegexpMatchMedium_1K-12 31.9µs ± 1% 31.9µs ± 1% ~ (p=1.000 n=17+17)
RegexpMatchHard_32-12 1.51µs ± 1% 1.52µs ± 2% +0.46% (p=0.042 n=18+18)
RegexpMatchHard_1K-12 45.3µs ± 1% 45.5µs ± 2% +0.44% (p=0.029 n=18+19)
Revcomp-12 388ms ± 1% 385ms ± 0% -0.57% (p=0.000 n=19+18)
Template-12 63.0ms ± 1% 63.3ms ± 0% +0.50% (p=0.000 n=19+20)
TimeParse-12 309ns ± 1% 307ns ± 0% -0.62% (p=0.000 n=20+20)
TimeFormat-12 328ns ± 0% 333ns ± 0% +1.35% (p=0.000 n=19+19)
[Geo mean] 47.0µs 46.9µs -0.20%
(https://perf.golang.org/search?q=upload:20180326.1)
For #10958.
For #24543.
Change-Id: Icbd52e711fdbe7938a1fea3e6baca1104b53ac3a
Reviewed-on: https://go-review.googlesource.com/102604
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently, we compile range loops into for loops with the obvious
initialization and update of the index variable. In this form, the
prove pass can see that the body is dominated by an i < len condition,
and findIndVar can detect that i is an induction variable and that
0 <= i < len.
GOEXPERIMENT=preemptibleloops compiles range loops to OFORUNTIL and
we're preparing to unconditionally switch to a variation of this for
#24543. OFORUNTIL moves the increment and condition *after* the body,
which makes the bounds on the index variable much less obvious. With
OFORUNTIL, proving anything about the index variable requires
understanding the phi that joins the index values at the top of the
loop body block.
This interferes with both prove's ability to see that i < len (this is
true on both paths that enter the body, but from two different
conditional checks) and with findIndVar's ability to detect the
induction pattern.
Fix this by teaching prove to detect that the index in the pattern
constructed by OFORUNTIL is an induction variable and add both bounds
to the facts table. Currently this is done separately from findIndVar
because it depends on prove's factsTable, while findIndVar runs before
visiting blocks and building the factsTable.
Without any GOEXPERIMENT, this has no effect on std or cmd. However,
with GOEXPERIMENT=preemptibleloops, this change becomes necessary to
prove 90 conditions in std and cmd.
Change-Id: Ic025d669f81b53426309da5a6e8010e5ccaf4f49
Reviewed-on: https://go-review.googlesource.com/102603
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This test measures "line churn" which was minimized to help
improve the debugger experience. With proper is_stmt markers,
this is no longer necessary, and it is more accurate (for
profiling) to allow line numbers to vary willy-nilly.
"Debugger experience" is now better measured by
cmd/compile/internal/ssa/debug_test.go
This CL made the obsoleting change:
https://go-review.googlesource.com/c/go/+/102435
Change-Id: I874ab89f3b243b905aaeba7836118f632225a667
Reviewed-on: https://go-review.googlesource.com/113155
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A new pass run after ssa building (before any other
optimization) identifies the "first" ssa node for each
statement. Other "noise" nodes are tagged as being never
appropriate for a statement boundary (e.g., VarKill, VarDef,
Phi).
Rewrite, deadcode, cse, and nilcheck are modified to move
the statement boundaries forward whenever possible if a
boundary-tagged ssa value is removed; never-boundary nodes
are ignored in this search (some operations involving
constants are also tagged as never-boundary and also ignored
because they are likely to be moved or removed during
optimization).
Code generation treats all nodes except those explicitly
marked as statement boundaries as "not statement" nodes,
and floats statement boundaries to the beginning of each
same-line run of instructions found within a basic block.
Line number html conversion was modified to make statement
boundary nodes a bit more obvious by prepending a "+".
The code in fuse.go that glued together the value slices
of two blocks produced a result that depended on the
former capacities (not lengths) of the two slices. This
causes differences in the 386 bootstrap, and also can
sometimes put values into an order that does a worse job
of preserving statement boundaries when values are removed.
Portions of two delve tests that had caught problems were
incorporated into ssa/debug_test.go. There are some
opportunities to do better with optimized code, but the
next-ing is not lying or overly jumpy.
Over 4 CLs, compilebench geomean measured binary size
increase of 3.5% and compile user time increase of 3.8%
(this is after optimization to reuse a sparse map instead
of creating multiple maps.)
This CL worsens the optimized-debugging experience with
Delve; we need to work with the delve team so that
they can use the is_stmt marks that we're emitting now.
The reference output changes from time to time depending
on other changes in the compiler, sometimes better,
sometimes worse.
This CL now includes a test ensuring that 99+% of the lines
in the Go command itself (a handy optimized binary) include
is_stmt markers.
Change-Id: I359c94e06843f1eb41f9da437bd614885aa9644a
Reviewed-on: https://go-review.googlesource.com/102435
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Don't do direct loads from argument slots if the sizes don't match.
This prevents us from loading from a float32 using a uint64 load
during expressions like uint64(math.float32Bits(f)) where f is a float32 arg.
Fixes#25322
Change-Id: I3887d76f78c844ba546243e7721d811c3d4a9700
Reviewed-on: https://go-review.googlesource.com/112637
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Initialization of t.UInt is missing from SetTypPtrs in config.go,
preventing rules that use it from matching when they should.
This adds the initialization to allow those rules to work.
Updated test/codegen/rotate.go to test for this case, which
appears in math/bits RotateLeft32 and RotateLeft64. There had been
a testcase for this in go 1.10 but that went away when asm_test.go
was removed.
Change-Id: I82fc825ad8364df6fc36a69a1e448214d2e24ed5
Reviewed-on: https://go-review.googlesource.com/112518
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Move ops can be faster than memmove calls because the number of bytes
to be moved is fixed and they don't incur the overhead of a call.
This change allows memmove to be converted into a Move op when the
arguments are disjoint.
The optimization is only enabled on s390x at the moment, however
other architectures may also benefit from it in the future. The
memmove inlining rule triggers an extra 12 times when compiling the
standard library. It will most likely make more of a difference as the
disjoint function is improved over time (to recognize fresh heap
allocations for example).
Change-Id: I9af570dcfff28257b8e59e0ff584a46d8e248310
Reviewed-on: https://go-review.googlesource.com/110064
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
This test runs independent goroutines modifying a comprehensive variety
of local vars to look for garbage collector regressions. This test has
been verified to trigger issue 22781 on the go1.9.2 tag. This test
expands on test/fixedbugs/issue22781.go.
Tests #22781
Change-Id: Id32f8dde7ef650aea1b1b4cf518e6d045537bfdc
Reviewed-on: https://go-review.googlesource.com/93715
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
replace map clears of the form:
for k := range m {
delete(m, k)
}
(where m is map with key type that is reflexive for ==)
with a new runtime function that clears the maps backing
array with a memclr and reinitializes the hmap struct.
Map key types that for example contain floats are not
replaced by this optimization since NaN keys cannot
be deleted from maps using delete.
name old time/op new time/op delta
GoMapClear/Reflexive/1 92.2ns ± 1% 47.1ns ± 2% -48.89% (p=0.000 n=9+9)
GoMapClear/Reflexive/10 108ns ± 1% 48ns ± 2% -55.68% (p=0.000 n=10+10)
GoMapClear/Reflexive/100 303ns ± 2% 110ns ± 3% -63.56% (p=0.000 n=10+10)
GoMapClear/Reflexive/1000 3.58µs ± 3% 1.23µs ± 2% -65.49% (p=0.000 n=9+10)
GoMapClear/Reflexive/10000 28.2µs ± 3% 10.3µs ± 2% -63.55% (p=0.000 n=9+10)
GoMapClear/NonReflexive/1 121ns ± 2% 124ns ± 7% ~ (p=0.097 n=10+10)
GoMapClear/NonReflexive/10 137ns ± 2% 139ns ± 3% +1.53% (p=0.033 n=10+10)
GoMapClear/NonReflexive/100 331ns ± 3% 334ns ± 2% ~ (p=0.342 n=10+10)
GoMapClear/NonReflexive/1000 3.64µs ± 3% 3.64µs ± 2% ~ (p=0.887 n=9+10)
GoMapClear/NonReflexive/10000 28.1µs ± 2% 28.4µs ± 3% ~ (p=0.247 n=10+10)
Fixes#20138
Change-Id: I181332a8ef434a4f0d89659f492d8711db3f3213
Reviewed-on: https://go-review.googlesource.com/110055
Reviewed-by: Keith Randall <khr@golang.org>
Use conditional moves instead of subtractions with borrow to handle
saturation cases. This allows us to delete the SUBE/SUBEW ops and
associated rules from the SSA backend. Using conditional moves also
means we can detect when shift values are masked so I've added some
new rules to constant fold the relevant comparisons and masking ops.
Also use the new shiftIsBounded() function to avoid generating code
to handle saturation cases where possible.
Updates #25167 for s390x.
Change-Id: Ief9991c91267c9151ce4c5ec07642abb4dcc1c0d
Reviewed-on: https://go-review.googlesource.com/110070
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
