Just like ParseGoHandle, PackageHandle isn't very useful as part of the
public API. Remove it.
Having PackagesForFile take a URI rather than a FileHandle seems
reasonable, and made me wonder if that logic applies to other calls like
ParseGo. For now I'm going to stop here. I could also revert that part
of the change.
Change-Id: Idba8e9fdba0b0c48e841a698eb97e47fd5f23cf5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244637
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
ParseGoHandles serve two purposes: they pin cache entries so that
redundant calculations are cached, and they allow users to obtain the
actual parsed AST. The former is an implementation detail, and the
latter turns out to just be an annoyance.
Parsed Go files are obtained from two places. By far the most common is
from a type checked package. But a type checked package must by
definition have already parsed all the files it contains, so the PGH
is already computed and cannot have failed. Type checked packages can
simply return the parsed file without requiring a separate Check
operation. We do want to pin the cache entries in this case, which I've
done by holding on to the PGH in cache.pkg.
There are some cases where we directly parse a file, such as for the
FoldingRange LSP call, which doesn't need type information. Those parses
can actually fail, so we do need an error check. But we don't need the
PGH; in all cases we are immediately using and discarding it.
So it turns out we don't actually need the PGH type at all, at least not
in the public API. Instead, we can pass around a concrete struct that
has the various pieces of data directly available.
This uncovered a bug in typeCheck: it should fail if it encounters any
real errors.
Change-Id: I203bf2dd79d5d65c01392d69c2cf4f7744fde7fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244021
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Due to the runtime's inability to collect cycles involving finalizers,
we can't close over handles in memoize.Functions without causing memory
leaks. Up until now we've dealt with that by closing over all the bits
of the snapshot that we want, but it distorts the design of all the code
used in the Functions.
We can solve the problem another way: instead of closing over the
snapshot/view, we can force the caller to pass it in. This is somewhat
scary: there is no requirement that the argument matches the data that
we're working with. But the reality is that this is not a new problem:
the Function used to calculate a cache value is not necessarily the one
that the caller expects. As long as the cache key fully identifies all
the inputs to the Function, the output should be correct. And since the
caller used the snapshot/view to calculate that cache key, it should
always be safe to pass in that snapshot/view. If it's not, then we
already had a bug.
The Arg type in memoize is clumsy, but I thought it would be nice to
have at least a little bit of type safety. I'm open to suggestions.
Change-Id: I23f546638b0c66a4698620a986949087211f4762
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244019
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The PackageHandle interface is fairly redundant with the Package
interface. As much as convenient, move users to Package and
weaken/remove methods from PackageHandle.
I would like to get rid of CompiledGoFiles too but
NarrowestPackageHandle is a little annoying. I think this is
unambiguously a step forward so I figured we can get it in and keep
iterating.
Change-Id: I6c5a3f462b1f19cbca6a267fedc36ce54613b6fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244018
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I finally spent the time to understand why branch changes were causing
unexpected errors. There may be other bugs, but this is the first I
spotted. For batched invalidations, we were overriding the value of
invalidateMetadata for each file, so the results depended on the order
of files in the didChangeWatchedFiles notification.
Change-Id: Id3ca7a758af0115c46dcd74ede590a0be3f8307d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244606
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change expands the scope of a workspace to the whole module, if the
user is in module mode. This means that diagnostics will appear and will
be updated for the whole module, even if the user only opens a
subdirectory. Similarly, references and other such queries will always
return consistent results, no matter which directory the user opens.
A new "root" field is added to the view. This is either the view's
folder or its module root. Almost all uses of view.folder have been
changed to view.root.
Updates golang/go#32394
Change-Id: I46f401f7c44b1b8429505aa032e0c15e88c4e2ef
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244117
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
I noticed a race in these logs:
https://build.golang.org/log/ec2915e97319de219284ed022338f2ebc549aff6.
We need to copy the environment and build flags for each config, since
we're treating the config as single use.
Change-Id: I9e717e688def088cb60f2b23b71d731e2b20b259
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244118
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change permits starting gopls without a root URI or any workspace
folders. If no view is found for an opened file, we try to create a new
view based on the module root of that file. In GOPATH mode, we just
use the directory containing the file.
I wrote a regtest for this by adding a new configuration that gets
propagated to the sandbox. I'm not sure if this is the best way to do
that, so I'll let Rob advise.
Fixesgolang/go#34160
Change-Id: I3deca3ac1b86b69eba416891a1c28fd35658a2ed
Reviewed-on: https://go-review.googlesource.com/c/tools/+/240099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change separates out different functions of mod handles.
Previously, we had ModHandle and ModTidyHandle. ModHandle was used to
parse go.mod files and get the results of `go mod why` and possible
dependency upgrades.
Now, we factor this out into 4 handles: ParseModHandle, ModWhyHandle,
ModUpgradeHandle, and ModTidyHandle. This allows each handle to be
specific to its own functionality. It also simplifies the code a bit,
as the handles can be written in terms of ParseModHandles instead of
FileHandles.
I may have some follow-up CLs to refactor the `go mod tidy` logic out of
the cache package, though I'm no longer certain that that's a good
choice.
Change-Id: I8e12299dfdda7bb61b05903d9aa474461d7f4836
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239117
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
These are commands whose changes should be reflected in the existing
go.mod file, as they do not provide edits. Add a third way of running
the go command, explicitly without -modfile. Update the regression test
accordingly.
Change-Id: I866b5db83b504fae190e58c306c01a7a4296672d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239200
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
While working in this code, I was confused by the fact that modHandle
and modData were used for both ModHandle and ModTidyHandle. Separate out
the two so it's a little more clear. This is mostly a copy-paste, with a
few fields renamed to simplify them.
Change-Id: I20ea11c32a624fd250eabf901d09ebb05fbad062
Reviewed-on: https://go-review.googlesource.com/c/tools/+/238337
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Refactor internal/lsp/cache to use a new temporary go.mod file for each
go command invocation. This cleans up the abstraction in the source
package, as we no longer are aware of temporary go.mod files.
This will also fix the raciness of reusing the same temporary go.mod
file for each invocation.
Updates golang/go#37318.
Fixesgolang/go#39504.
Change-Id: I90bc17a678b5df222ab598c8f7dbf6c6fdd393f6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When a workspace package is deleted, we need to stop trying to load it.
Check that every workspace package still has at least one .go file when
we copy them between snapshots.
I think this is correct, but even if it's not, orphaned file loading
should patch it up.
Fixesgolang/go#38977.
Change-Id: I0b11010a40aac09f619f54b5ba02e2467b15a36c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/238028
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Limiting the Config to the view seems reasonable, considering that it is
only used to run the `go` command. I prefer just having the cache run
go commands, so that source doesn't have to deal with the environment.
This also enables CL 237517.
Change-Id: I639c082592de30e9682dc25cdd12c7751ddb4f97
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237600
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We use file identities pervasively throughout gopls. Prior to this
change, the identity is the modification date of an unopened file, or
the hash of an opened file. That means that opening a file changes its
identity, which causes unnecessary churn in the cache.
Unfortunately, there isn't an easy way to fix this. Changing the
cache key to something else, such as the modification time, means that
we won't unify cache entries if a change is made and then undone. The
approach here is to read files eagerly in GetFile, so that we know their
hashes immediately. That resolves the churn, but means that we do a ton
of file IO at startup.
Incidental changes:
Remove the FileSystem interface; there was only one implementation and
it added a fair amount of cruft. We have many other places that assume
os.Stat and such work.
Add direct accessors to FileHandle for URI, Kind, and Version. Most uses
of (FileHandle).Identity were for stuff that we derive solely from the
URI, and this helped me disentangle them. It is a *ton* of churn,
though. I can revert it if you want.
Change-Id: Ia2133bc527f71daf81c9d674951726a232ca5bc9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237037
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This removes all the cache/session/view hooks from the lsp and instead
uses normal introspection from the client to find all the entities
rather than keeping shadow copies of the object graph in the debug page
handler.
This required the addition only of the ability to view the sessions open
on a cache and exposing the unique identifier for all the objects, both
of which are useful and reasonable things to have in the API anyway.
Change-Id: Ic19903e7b19832ca79290954ec373d4177789742
Reviewed-on: https://go-review.googlesource.com/c/tools/+/236197
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In addition to adding a `go mod vendor` command option, which can be
exposed via an editor client frontend, we show a suggestion to users who
experience the "inconsistent vendoring" error message.
The main change made here is that we save the view initialization error,
and we return it if the view has absolutely no metadata. This seems
reasonable enough, but my fear is that it may lead to us showing
outdated error messages. I will spend some time improving the handling
of initialization errors in follow-up CLs.
Updates golang/go#39100
Change-Id: Iba21fb3fbfa4bca956fdf63736b397c47fc7ae44
Reviewed-on: https://go-review.googlesource.com/c/tools/+/235619
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change introduces Module and ModuleError struct types to the
packages package with the same types as defined in the cmd/go
documentation for module information output by go list (with the
exception of the Module type's Versions and Update fields).
go/packages will fill the module struct with the module information
output by go list. Drivers that support modules can also provide
module information by filling the Module fields in the packages in
their driverResponses.
Fixesgolang/go#35921
Change-Id: Icbdf79869f09d26f6a01c3670146ace4f6ffa25e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234219
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now that we support authoring cgo packages better, we need a way to
regenerate the C definitions. Doing it automatically is very difficult;
in particular, referencing a new symbol from the C package may require
regeneration, but we don't want to do that for every typo.
For now, give the user a button and make them push it. We attach a
code lens to the import "C" line. This is vulnerable to the usual
user-didn't-save glitches.
Updates golang/go#35721.
Change-Id: Iaa3540a9a12bbd8705e7f0e43ad0be1b22e87067
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234103
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When on 1.15+, enable TypecheckCgo. This improves cgo support
significantly, but we'll still have trouble with newly-referenced C
identifiers and changes to the magic comment.
Updates golang/go#35721.
Change-Id: I44dc95ce2d91d552e1e66e3722dc4230ab59fedd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229779
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In (*snapshot).addPackage, we return early if the package handle is
already cached, but we continue building the dependency graph with a
handle passed into addPackage.
This seems fine since both handles should have the same cache key,
but if we clone the snapshot, we will end up dropping the handle that
had the type information on it. It will then have to be recomputed,
causing the skew in the types.Package.
Fixesgolang/go#38403
Change-Id: I0e360447a428123fcac444fbea3c2a3232ef941a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232817
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We were previously sending diagnostics for nonexistent files, and then
adding them to the snapshot in the process. Remove this behavior, and
add a regression test. Case insensitive filesystems were too confusing
to write a test for, but fortunately, Filippo reported another instance
of this bug, so I used that for the regression test.
Fixesgolang/go#38602
Change-Id: I4ef6b51944f3338e838875a5aafffd066e8392f4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230315
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
event.Log removed
event.Print -> event.Log
event.Record -> event.Metric
event.StartSpan -> event.Start
In order to support this core now exposes the MakeEvent and Export functions.
Change-Id: Ic7550d88dbf400e32c419adbb61d1546c471841e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229238
Reviewed-by: Robert Findley <rfindley@google.com>
internal/telemetry/event was renamed to internal/event/core
Some things were partly moved from internal/telemetry/event straight to
internal/event to minimize churn in the following restructuring.
Change-Id: I8511241c68d2d05f64c52dbe04748086dd325158
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229237
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change attempts to fix a concurrency error that would cause
textDocument/CodeLens, textDocument/Formatting, textDocument/DocumentLink,
and textDocument/Hover from failing on go.mod files.
The issue was that the go command would return a potential concurrency
error since the ModHandle and the ModTidyHandle are both using the
temporary go.mod file.
Updates golang/go#37824
Change-Id: I6cd63c1f75817c7308e033aec473966536a2a3bd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224917
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The options can be modified without the view being recreated, so we need
a mutex there.
Change-Id: I87e881835622a941fce98e4a1062aa41acd84fcb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227022
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
If a package starts out as command-line-arguments, and then becomes
"valid" (i.e., gets a package declaration), we shouldn't continue to try
to diagnose "command-line-arguments". We should remove
"command-line-arguments" from workspace packages any time its metadata
is invalidated (assuming it may get added back if a file= query produces
it again).
Include the relevant regression test.
Fixesgolang/go#37978
Change-Id: I7fc51edeb58007b4b4a163336cbeb752a53da322
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225317
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
I'm not sure if this is entirely the correct approach, but at the very
least we should never pass "command-line-arguments" to packages.Load. We
still need to cache packages with the path "command-line-arguments" to
avoid an excessive number of calls to packages.Load.
Updates golang/go#37978
Change-Id: I1b5263a3dab95aacd797f03f742069fd0c53619c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225117
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This changes the way keys work, there is still a single internal key
implementation for performance reasons, but the public interface is a set of key
implementations that have type safe Of and Get methods.
This also hides the implemenation of Tag so that we can modify the storage form
and find a more efficient storage if needed.
Change-Id: I6a39cc75c2824c6a92e52d59f16e82e876f16e9c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223137
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Move the lsp specific telemetry package that just declares the labels under the
debug package and call it tag, to make all the usages much more readable.
Change-Id: Ic89b3408dd3b8b3d914cc69d81f41b8919aaf424
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222850
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reading the docstring, it looks like the sense of the type assertion was
accidentally inverted in this function. Fix it to what I believe was
intended.
Fixesgolang/go#37687
Change-Id: Ief44a996f1a262527c2916d6b78b81dd35b2cf9e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222217
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
This change attaches a modTidyHandle to the snapshot instance and tries to reuse it as often as possible. It also modifies the modTidyKey to include the files that have not yet been saved. This was necessary because `go mod tidy` only runs using contents on disk.
So, if a user decides to add an import that is not in their modcache, we run diagnostics as normal and the ModTidyKey's imports field gets updated with the new import, we run `go mod tidy` but since the file was not saved yet, nothing changes. Then when the user eventually saves their file, we do not rerun `go mod tidy` because the imports hash has not changed from the time the file was in overlay to the time the file was saved on disk. To be able to account for this, we need the invalidate the ModTidyKey when imports change between saves.
Change-Id: I9e210a15cf009d222cecd7824c2a1a927957483b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219477
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Related to https://github.com/microsoft/vscode-go/issues/3063.
A small collection of fixes: (1) Don't reload packages with missing
dependencies unless imports change. (2) Show the error message from the
initial workspace load to the user.
Also, a small fix for deletion suggested fixes - upgrading to the latest
version of the VS Code language client revealed that I had made a
mistake there.
Change-Id: I7ab944ed27dc3da24a79d5d311531a1eb2b73102
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221217
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
I had meant to continue instead of break this loop. This caused us to
invalidate all IDs (except for those for one file) every time a snapshot
was cloned.
Picked up a staticcheck fix along the way.
Change-Id: I8fb3b2bdd6b58ac21130e01cb0d32fa6a57e6b73
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221103
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
This change implements support for textDocument/documentLink when it comes to go.mod files.
Updates golang/go#36501
Change-Id: Ic0974e3e858dd1c8df54b7d7abee085bbcb6d4ee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219938
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We had previously only added to a list of package IDs, rather than
invalidating package IDs along with metadata. This is because we loaded
packages by file, rather than by package path or workspace. Now that we
load by workspace, we can invalidate package IDs. This will avoid the
issue of lingering "command-line-arguments" IDs.
Fixesgolang/go#37213
Change-Id: I21830219efaf0df9531e9d811ccbc3f141c0cbcb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/220197
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change has a fix for mod/codelens: check if we get an error from ParseModHandles().Upgrades(). This change also only runs codelens on save.
Change-Id: I6dab7ddf3a08c650e4c670b039b1e99153ec8187
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219478
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently there is no need for this because the file contents are part
of the file handle. This change is in preparation for an impending
improvement that tweaks the source code during the parse stage to fix
certain kind of terminal parse errors. Any code that wants to use
an *ast.File or *token.File in conjunction with the file contents
needs access to the doctored source code so things line up.
Change-Id: I59d83d3d6150aa1264761aa2c1f6c1269075a2ce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218979
Run-TryBot: Muir Manders <muir@mnd.rs>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now that we build PackageHandles in load, we can simplify a lot of our
logic for rebuilding them and reloading metadata.
The only possibly-significant change is the missing imports logic. Now
that we always create package handles in load, we don't have to do the
extra "sameSet" logic. If the package handle hasn't been invalidated
since we last built it, we will keep the benefits of caching it. Otherwise,
it will be rebuilt in load.
Updates golang/go#36918
Change-Id: Ieb45898d248501e3cebdb95c8b518149ba7498e5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217157
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change largely reverts CL 217139, which attempted to guess a
package's parse mode based on whether or not it was in the user's
workspace. This ignored the fact that a user may jump to the definition
of a file outside of their workspace.
Fixesgolang/go#37045
Change-Id: Icb6b9d055bd1f260013227db1a6a34873c45b680
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218499
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Hold the session's overlay mutex the whole time we compute new overlays,
and then pass these overlays directly into clone. This avoids us calling
s.session.GetFile, which can return overlays that the snapshot doesn't
yet "know" about.
Change-Id: I1a10c78e26f8fec64550bfe0a97b5975ea8f976b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218321
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This is the first in a series of changes to move overlay handling to the
snapshot instead of the session. We may not be able to fully get away
from managing overlays on the session, but we should be able to only use
overlays when they are known to the snapshot.
Change-Id: I88b125117cd2cfbd0ff9ef16a944a34297c81b10
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218324
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This metadata was hardly being used, and it's not really necessary now
that we are creating package handles in load. There are still a number
of cases that can simplified because of this fact, but those will be
done in follow-ups.
Also, fix a stray staticcheck warning.
Change-Id: I12d1b4d568a8fd145d08397a926e7ba6f3428604
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217138
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Our current invariant is that all workspace packages are parsed in full
mode, and all dependencies are parsed in exported mode. We can rely on
this, as well as the fact that workspace packages are set during
metadata loads, to reduce the amount of plumbing the mode requires.W
Change-Id: Ib9406ca3c0dc2c81c7ee3158407f28022924d4d0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217139
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change will skip packages.load calls when a go.mod file changes if that go.mod file is not the go.mod file associated with the view.
Change-Id: I23a214a89203dd58417f3e2f69725ce3b669a5ca
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217238
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We can assume that any package we load directly will be a package in the
workspace, so it's reasonable to set workspace packages at that point.
We're guaranteed not to directly load dependencies, or we may end up
with indirect dependencies in the go.mod file.
Change-Id: I5d406e54da2bc3278b139c75b436d111b5564418
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216726
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
