In identical(), we don't want any to match a shape empty-interface type
for the identStrict option, since IdenticalStrict() is specifically not
supposed to match a shape type with a non-shape type.
There is similar code in (*Type).cmp() (TINTER case), but I don't
believe that we want to disqualify shape types from matching any in this
case, since cmp() is used for back-end code, where we don't care about
shape types vs non-shape types.
The issue mainly comes about when 'any' is used as a type argument
(rather than 'interface{}'), but only with some complicated
circumstances, as shown by the test case. (Couldn't reproduce with
simpler test cases.)
Fixes#50109
Change-Id: I3f2f88be158f9ad09273237e1d346bc56aac099f
Reviewed-on: https://go-review.googlesource.com/c/go/+/371154
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Augmented some of the typeswitch*.go tests so that some instantiations
have duplicate cases, in order to ensure we're testing that.
Spacing changes in the tests are due to gofmt.
Change-Id: I5d3678813505c520c544281d4ac8a62ce7e236ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/370155
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Deal with case where a certain instantiation of a generic
function/method leads to an unsatisfiable type assertion or type case.
In that case, the compiler was causing a fatal error while trying to
create an impossible itab for the dictionary. To deal with that case,
allow ITabLsym() to create a dummy itab even when the concrete type
doesn't implement the interface. This dummy itab is analogous to the
"negative" itabs created on-the-fly by the runtime.
We will use the dummy itab in type asserts and type switches in
instantiations that use that dictionary entry. Since the dummy itab can
never be used for any real value at runtime (since the concrete type
doesn't implement the interface), there will always be a failure for the
corresponding type assertion or a non-match for the corresponding
type-switch case.
Fixes#50002
Change-Id: I1df05b1019533e1fc93dd7ab29f331a74fab9202
Reviewed-on: https://go-review.googlesource.com/c/go/+/369894
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Make sure that we can import/export selects for generics.
Change-Id: Ibf36e98fc574ce9275820aa426b3e6703b0aae6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/369101
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When we set g.curDecl for the type params created during fillinMethods
for an instantiated type, we need to save/restore its value, because
fillinMethods() may be called while processing a typeDecl. We want the
value of g.curDecl to continue to be correct for type params created in
the typeDecl. Because of ordering issues, not restoring g.curDecl
happens to cause problems (which don't always show up visibly) exactly
when a type param is not actually used in a type declaration.
Cleared g.curDecl to "" at the later points in typeDecl() and
funcDecl(). This allows adding asserts that g.curDecl is always empty
("") when we set it in typeDecl() and funcDecl(), and always non-empty
when we use it in typ0().
Fixes#49893
Change-Id: Ic2fb1df791585bd257f2b86ffaae0453c31705c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/368454
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Currently, identical handles any and interface{} by checking against
Types[TINTER]. This is not always true, since when two generated
interface{} types may not use the same *Type instance.
Instead, we must check whether Type is empty interface or not.
Fixes#49875
Change-Id: I28fe4fc0100041a01bb03da795cfe8232b515fc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/367754
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In the case where we need to re-export a generic function/method from
another package in the export data of the current package, make sure it
is loaded before trying to write it out.
Fixed#49667
Change-Id: I177754bb762689f34cf5c8ad246d43f1cdbbf195
Reviewed-on: https://go-review.googlesource.com/c/go/+/365837
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
It causes a crash because of the unexpected XDOT operation. It's not
needed, since we will run ComputeAddrTaken() on function instantiations
after stenciling. And it's not always correct, since we may not be able
to distinguish between a array and a slice, if a type is dependent on a
type param.
However, we do need to call ComputeAddrTaken on instantiations created
during inlining, since that is after the main ComputeAddrTaken pass.
Fixes#49659
Change-Id: I0bb610cf11f14e4aa9068f6ca2a012337b069c79
Reviewed-on: https://go-review.googlesource.com/c/go/+/365214
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Type constraint satisfaction is interface implementation.
Adjusted a few error messages.
Change-Id: I4266af78e83131a76b1e3e44c847a21de760ac6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/363839
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We hope to support this feature one day, but it doesn't work currently.
Issue a nice error message instead of having the compiler crash.
Update #47631
Change-Id: I0359411410acbaf9a5b9dbb988cd933de1bb8438
Reviewed-on: https://go-review.googlesource.com/c/go/+/364054
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
We want package names exposed by reflect to be things like
main.F[main.foo], not main.F["".foo].
Fixes#49547
Change-Id: I182411a75d56ce1f64fde847e5b9ee74ce44e00b
Reviewed-on: https://go-review.googlesource.com/c/go/+/363656
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Like OFUNCINST, in case of OXDOT call expression, the arguments need
to be transformed earlier, so any needed CONVIFACE nodes are exposed.
Fixes#49538
Change-Id: I275ddf6f53a9cadc8708e805941cdf7bdffabba9
Reviewed-on: https://go-review.googlesource.com/c/go/+/363554
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Our compiler gets confused between functions that were declared
with no body, and those which have a body but it is empty.
Ensure that when stenciling, we generate a nonempty body.
The particular test that causes this problem is in
cmd/compile/internal/gc/main.go:enqueueFunc. It thinks that if
a function has no body, then we need to generate ABI wrappers for
it, but not compile it.
Fixes#49524
Change-Id: Id962666a2098f60a2421484b6a776eafdc4f4a63
Reviewed-on: https://go-review.googlesource.com/c/go/+/363395
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When building a call expression for function instantiation closure, if
it's a variadic function, the CallExpr.IsDDD must be set for typecheck
to work properly. Otherwise, there will be a mismatch between the
arguments type and the function signature.
Fixes#49516
Change-Id: I0af90ee3fcc3e6c8bba8b20e331e044cbce17985
Reviewed-on: https://go-review.googlesource.com/c/go/+/363314
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For generic functions, we can export untransformed OKEY nodes, and the
key identifier is written as an ONONAME. But in this case, we do not
want to call Resolve() on the identifier, since we may resolve to a
global type (as happens in this issue) or other global symbol with the
same name, if it exists. We just want to keep the key identifier as an
Ident node.
To solve this, I added an extra bool when exporting an ONONAME entry,
which indicates if this entry is for a key or for a global (external)
symbol. When the bool is true (this is for a key), we avoid calling
Resolve().
Fixes#49497
Change-Id: Ic8fa93d37bcad2110e0e0d060080b733e07e35d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/363074
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
If we reach a generic type that is part of a cycle
and we are in a type parameter list, we have a cycle
through a type parameter list, which is invalid.
Fixes#49439.
Change-Id: Ia6cf97e1748ca0c0e61c02841202050091365b0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/361922
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When bulding formal arguments of newly created closure, irgen forgets to
set "..." field attribute, causing type mismatched between the closure
function and the ONAME node represents that closure function.
Fixes#49432
Change-Id: Ieddaa64980cdd3d8cea236a5a9de0204ee21ee39
Reviewed-on: https://go-review.googlesource.com/c/go/+/361961
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Adjust TypeDefn(), which is used by reportTypeLoop(), to work for nodes
with no Ntype set (which are all nodes in -G=3 mode). Normally,
reportTypeLoop() would not be called, because the types2 typechecker
would have already caught it. This is a possible way to report an
unusual type loop involving type params, which is not being caught by
the types2 type checker.
Updates #48962
Change-Id: I55edee46026eece2e8647c5b5b4d8dfb39eeb5f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/361398
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Don't inline a function fn that has no shape parameters, but is passed
at least one shape arg. This means we must be inlining a non-generic
function fn that was passed into a generic function, and can be called
with a shape arg because it matches an appropriate type parameter. But
fn may include an interface conversion (that may be applied to a shape
arg) that was not apparent when we first created the instantiation of
the generic function. We can't handle this if we actually do the
inlining, since we want to know all interface conversions immediately
after stenciling. So, we avoid inlining in this case.
Fixes#49309.
Change-Id: I7b8ab7b13e58fdb0111db91bc92a91d313f7c2c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/361260
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Pointers to arrays can be used to cast from a slice. We need
the shape of such type params to be different so we can compile
those casts correctly.
This is kind of a big hammer to fix#49295. It would be nice to
only do this when we know there's a []T->*[N]T conversion.
Fixes#49295
Change-Id: Ibda33057fab2dd28162537aab0f1244211d68e3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/361135
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Add test for indexing on variables whose types are constrained to
various kinds of types.
Change-Id: I991eecfe39dba5d817c0fbe259ba558d4881ea84
Reviewed-on: https://go-review.googlesource.com/c/go/+/360867
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The types of the two interfaces should be equal, but they aren't.
We end up with multiple descriptors for a type when we need type
descriptors to be unique.
Fixes#49241
Change-Id: I8a6c70da541c6088a92a01392bc83b61cc130eba
Reviewed-on: https://go-review.googlesource.com/c/go/+/360134
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In case of reference to method call of an imported fully-instantiated
type, nameNode.Func will be nil causes checkFetchBody panic. To fix
this, make sure checkFetchBody is only called when Func is not nil.
Fixes#49246
Change-Id: I32e9208385a86d4600d8ebf6f5efd8fca571ea16
Reviewed-on: https://go-review.googlesource.com/c/go/+/360056
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Use types2.Structure() to get single underlying type of typeparams, to
handle some unusual cases where a type param is constrained to a single
underlying struct or map type.
Fixes#48538
Change-Id: I289fb7b31d489f7586f2b04aeb1df74e15a9f965
Reviewed-on: https://go-review.googlesource.com/c/go/+/359335
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
We may revisit this decision in a future release. By disallowing this
for Go 1.18 we are ensuring that we don't lock in the generics design
in a place that may need to change later. (Type declarations are the
primary construct where it crucially matters what the underlying type
of a type parameter is.)
Comment out all tests that rely on this feature; add comments referring
to issue so we can find all places easily should we change our minds.
Fixes#45639.
Change-Id: I730510e4da66d3716d455a9071c7778a1e4a1152
Reviewed-on: https://go-review.googlesource.com/c/go/+/359177
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Now that we permit arbitrary types as constraints, we no longer need them.
For #48424
Change-Id: I15fef26a563988074650cb0801895b002c44148a
Reviewed-on: https://go-review.googlesource.com/c/go/+/359258
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
There were two main outer switch statements in node() that can just be
combined. Also, for simplicity, changed an IsCmp() conditional into just
another case in the switch statement.
Also, the inner OCALL switch statement had a bunch of fairly duplicate
cases. Combined the cases that all had no special semantics, into a
single default case calling transformCall().
In the OCALL case in dictPass(), got rid of a check for OFUNCINST (which
will always have been removed by this point). Also, eliminated an assert
that could cause unneded failures. transformCall() should always be
called if the node op is still OCALL, so no need to assert on the ops of
call.X.
Added an extra test in issue47078.go, to explicitly check for case where
the X argument of a call is a DOTTYPE.
Change-Id: Ifb3f812ce12820a4ce08afe2887f00f7fc00cd2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/358596
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
To capture the fact that a method was called on a generic interface,
so we can make sure the linker doesn't throw away any implementations
that might be the method called.
See the comment in reflect.go for details.
Fixes#49049
Change-Id: I0be74b6e727c1ecefedae072b149f59d539dc1e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/357835
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Change-Id: I2fca7a801c85ed93c002c23bfcb0cf9593f1bdf4
Reviewed-on: https://go-review.googlesource.com/c/go/+/356571
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Make sure that an embedded field like "MyStruct[T]" works and can be
referenced via the name MyStruct.
Change-Id: I8be1f1184dd42c4e54e4144aff2fd85e30af722f
Reviewed-on: https://go-review.googlesource.com/c/go/+/356312
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Modify the phase for creating needed function/method instantiations and
modifying functions to use those instantiations, so that the phase is
self-contained and can be called again after inlining. This is to deal
with the issue that inlining may reveal new fully-instantiated types
whose methods must be instantiated.
With this change, we have an extra phase for instantiation after
inlining, to take care of the new fully-instantiated types that have
shown up during inlining. We call inline.InlineCalls() for any new
instantiated functions that are created.
Change-Id: I4ddf0b1907e5f1f7d45891db7876455a99381133
Reviewed-on: https://go-review.googlesource.com/c/go/+/352870
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Add a test for a generic sort function, operating on several different
pointer types (across two packages), so they should all share the same
shape-based instantiation. Actually check that only one instantiation of
Sort is created using 'go tool nm', and also check that the output is
correct.
In order to do the test on the executable using 'go nm', added this as a
'go test' in cmd/compile/internal/test.
Added the genembed.go test that I meant to include with a previous CL.
Change-Id: I9962913c2f1809484c2b1dfef3b07e4c8770731c
Reviewed-on: https://go-review.googlesource.com/c/go/+/354696
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In the case in (*TSubster).Type() that we were running into an
incomplete underlying type (TFORW), we should just be immediately
returning the type returned by ts.SubstForwFunc(forw), since that call
returns a proper type node, and has set up any remaining work that has
to be done when we get done with the current top-level type definition.
(For import, that function is doInst, which does an Instantiate of the
new substituted type, with the delayed part via deferredInstStack.) We
should not continue doing the later parts of (*TSubster).Type(), since
the underlying type may not yet have its methods filled in, etc.
Also, in Instantiate(), we need to put the desired new type on
deferredInstStack, even if the base type node already exists, if the
type node is in TFORW state. This is now exactly the case when
Instantiate is called from (*TSubster).Type via doInst, since
(*TSubster).Type has already called NewIncompleteNamedType().
Fixes#48716Fixes#48889
Change-Id: Icd6be5721c4ac75bf8869b8bbdeca50069d632ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/355250
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For this unusual case, where a constraint specifies exactly one type, we
can have a COMPLIT expression with a type that is/has typeparams.
Therefore, we add code to delay transformCompLit for generic functions.
We also need to break out transformAddr (which corresponds to tcAddr),
and added code for delaying it as well. Also, we now need to export
generic functions containing untransformed OCOMPLIT and OKEY nodes, so
added support for that in iexport.go/iimport.go. Untransformed OKEY
nodes include an ir.Ident/ONONAME which we can now export.
Had to adjust some code/asserts in transformCompLit(), since we may now
be transforming an OCOMPLIT from an imported generic function (i.e. from
a non-local package).
Fixes#48537
Change-Id: I09e1b3bd08b4e013c0b098b8a25d082efa1fef51
Reviewed-on: https://go-review.googlesource.com/c/go/+/354354
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The CL 349613 causes this problem.
In fact, we want to use the outer i to find m.List[i],
but the newly created index variable i in the nearest
for range shadow the outer i.
Fixes#48838.
Change-Id: I10f0bd985340f9443eefaadda6fc56e4e7e9a10c
Reviewed-on: https://go-review.googlesource.com/c/go/+/354549
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Add a simple test with an exported generic function that does
recover/defer, to test that recover/defer are exported/imported
properly (and a generic function with recover/defer works fine).
Change-Id: Idc3af101cbb78fc96bf945f1f5eab2740dd8994b
Reviewed-on: https://go-review.googlesource.com/c/go/+/353883
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Change-Id: Icabef5cf75770ffde012b1fc785a72f53f9b2c46
Reviewed-on: https://go-review.googlesource.com/c/go/+/353669
Trust: Robert Griesemer <gri@golang.org>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
This change enables the relaxed syntax for constraint literals
as proposed in issue #48424 and adds a simple smoke test for
the compiler. (Most of the relevant changes are in the syntax
and types2 package which have more extensive tests for this.)
This makes it possible to experiment with the new syntax while
we contemplate the fate of #48424.
If #48424 is accepted, this change can remain. If #48424 is
not accepted, reverting this CL will remove this feature in
the compiler.
For #48424.
Change-Id: I624fbb37c2f616ee9ad692e17e4fc75c9d5b06e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/353389
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
When collecting type parameters, wrap constraint literals of the
form ~T or A|B into interfaces so the type checker doesn't have
to deal with these type set expressions syntactically anywhere
else but in interfaces (i.e., union types continue to appear
only as embedded elements in interfaces).
Since a type constraint doesn't need to be an interface anymore,
we can remove the respective restriction. Instead, when accessing
the constraint interface via TypeParam.iface, wrap non-interface
constraints at that point and update the constraint so it happens
only once. By computing the types sets of all type parameters at
before the end of type-checking, we ensure that type constraints
are in their final form when accessed through the API.
For #48424.
Change-Id: I3a47a644ad4ab20f91d93ee39fcf3214bb5a81f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/353139
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The computation for determining the shapes to use at the top of
getInstantation was not always creating shapes with the proper indexes.
If an instantiation is being called from another instantiated function,
we cannot just copy the shape types unchanged, because their indexes may
have changed. So, for type args that already shapes, we still call
Shapify() with the correct index.
Fixes#48645
Change-Id: Ibb61c6f9a3c317220fb85135ca87eb5ad4dcff9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/353030
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We currently make dictionaries contain a relocation pointing to
methods that generic code might use, so that those methods are not
deadcode eliminated. However, with inlining we can end up not using
the dictionary, making the reference from the dictionary to the method
no longer keep the method alive.
Fix this by keeping the dictionary alive at generic interface call sites.
It's a bit of overkill, as we only need to keep the dictionary statically
alive. We don't actually need it dynamically alive, which is what KeepAlive
does. But it works. It ends up generating a LEAQ + stack spill that aren't
necessary, but that's pretty low overhead.
To make this work, I needed to stop generating methods on shape types.
We should do this anyway, as we shouldn't ever need them. But currently
we do use them! issue44688.go has a test that only works because it calls
a method on a shape type. I've disabled that test for now, will work on it
in a subsequent CL.
Fixes#48047
Change-Id: I78968868d6486c1745f51b8b43be0898931432a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/349169
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
In CL 349613,we have supported types.IdentityStrict() that does strict
type comparison.
Therefore, OCONVNOP becomes a possible case in call.X.Op().
Fixes#48604
Change-Id: Ibab27ffcf09656e3380314662f05f38294c1c6ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/351857
Trust: Dan Scales <danscales@google.com>
Trust: David Chase <drchase@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
For #48617
Change-Id: I6c00b7912c441ac323a0adede63b7d4a9ae6f92d
Reviewed-on: https://go-review.googlesource.com/c/go/+/351858
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
In CL 349614. we removed the early transformation code that
was needed to create the implicit CONVIFACE nodes.
Because the transformCall function is not called when translating OFUNCINST.
So we add in needed CONVIFACE nodes via typecheckaste().
Fixes#48598
Change-Id: If9dc7040cdc38ef2e52fdbb08c840095651426f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/351856
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Deal correctly with a blank local variable with type param type. This is
a special case, because a blank local variable is not in the fn.Dcl
list. In this case, we must explicitly create a new blank node with the
correct substituted type, so we have correct types if the blank local
variable has an initializing assignment.
Fixes#48602
Change-Id: I903ea44b29934e180404e32800773b7309bf297b
Reviewed-on: https://go-review.googlesource.com/c/go/+/352117
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
The delayTransform only checks whether ir.CurFunc is generic function or
not. but when compiling a non-generic closure inside a generic function,
we also want to delay the transformation, which delayTransform fails to
detect, since when ir.CurFunc is the closure, not the top level function.
Instead, we must rely on irgen.topFuncIsGeneric field to decide whether
to delay the transformation, the same logic with what is being done for
not adding closure inside a generic function to g.target.Decls list.
Fixes#48609
Change-Id: I5bf5592027d112fe8b19c92eb906add424c46507
Reviewed-on: https://go-review.googlesource.com/c/go/+/351855
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
