I had originally thought I might be able to use exprAtPos for this,
which is why I ended up eliminating that function when I saw it only had
one use.
One test also had to change in order to fit better with the spec.
Specifically: "If [the active parameter is] omitted or the value
lies outside the range of `signatures[activeSignature].parameters`
it defaults to 0 if the active signature has parameters."
Fixesgolang/go#36766.
Change-Id: I400d5b2db2985bfaa5efbcd91225151ca8b5f46a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216309
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change moves as much view initialization code into the
initialization function, instead of having it happen on view create.
Also, the `go env` variables that are collected at inconsistent times
are all collected on view creation. That is sufficient, since the view
is recreated if the environment changes.
I had originally hoped that the initial call to `go env` and the
-modfile detection could become part of this parallel initialization as
well, but you can't create a *packages.Config until the temporary
modfile has been set up, so it still makes sense to do that on view
create. This is, however, the reasoning behind the refactorings in
the -modfile detection in this CL. The main changes are a few renamings
and a split between snapshot.ModFiles and view.modFiles to maximize the
amount of work done in the view. I changed view.modfiles to moduleInformation
because I thought we might want to store additional information there at some
point. Rohan, please let me know if you disagree with any of the changes I made,
and I can revert them.
Fixesgolang/go#36487
Change-Id: I504db5a4f41b79bee99ebd391e32e7b520a19569
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214417
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
In golang.org/cl/209419, CheckPackageHandle was renamed to
PackageHandle, but a number of references to CheckPackageHandle remained
in function names and comments.
This CL cleans up most of these, though there was at least one case
(internal/lsp/cache.checkPackageKey) where the obvious renaming
conflicted with another function, so I skipped it.
Change-Id: I517324279ff05bd5b1cab4eeb212a0090ca3e3ad
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214800
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change eliminates the extra step of calling GetFile on the view and
getting the FileHandle from the snapshot. It also eliminiates the
redundant source.File type. Follow up changes will clean up the file
kind handling, since it still exists on the fileBase type.
Change-Id: I635ab8632821b36e062be5151eaab425a5698f60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211778
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Lack of context in error messages is making my life difficult. Add
context to a few, refactoring out some duplicate code along the way.
Change-Id: I3a940b12ec7c82b1ae1fc477694a2b8b45f6ff71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209860
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Running staticcheck on the entire workspace causes a slowdown, and most
likely users don't want to see staticcheck reports for every
subdirectory of their workspace. Only run staticcheck on open files.
Also, fixed a staticcheck warning that showed up along the way. Filed
golang/go#35718 to remind ourselves to fix all of the staticcheck warnings
that showed up when we ran gopls with staticcheck on x/tools.
Finally, made sure that we don't send empty diagnostics when diagnosing
the snapshot on start-up, as that is not necessary.
Change-Id: Ic51d1abfc80b1b53397057f06a4cfd7e2dc930f9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208098
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Type aliases don't work well with types.TypeString. Work around that by
using the AST to build this information. Follow up from CL 201677.
Fixesgolang/go#33500
Change-Id: I8b2d4ea238eb5d284a419f2b0bbf9655e69d434d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208497
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change cleans up internal/lsp/source/view.go to have a more logical
ordering and deletes the view.CheckPackageHandle function. Now, the only
way to get a CheckPackageHandle is through a snapshot (so all of the
corresponding edits).
Also, renamed fuzzy tests to fuzzymatch. Noticed this weird error when
debugging - I had golang.org/x/tools/internal/lsp/fuzzy in my module
cache and it conflicted with the test version.
Change-Id: Ib87836796a8e76e6b6ed1306c2a93e9a5db91cce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change encompasses the refactorings needed to correctly implement
CL 204079. The goal of this CL is to make the actual relevant diffs more
clear.
Change-Id: I38acfd436e2380be790910e01b6e37d8280e9100
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204139
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Now that we are using the memoize package to cache analysis results, we
can use that cache for suggested fixes.
Change-Id: I42905a6fe575f49d38979d53d58ea8ec59210ae0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/203278
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
A package really should always be associated with its snapshot rather
than its view. This eliminates some extra parameters in a few utility
functions.
Change-Id: I60f9b7286e0072d3268602f6bd32052a3d2e5559
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202039
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This will prevent us from panicking in cases with errors.
Fixesgolang/go#34824
Change-Id: I02c20655f6926ec00c1591a905ff5a107cc44192
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200300
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change does not complete the work to handle snapshots correctly,
but it does implement the behavior of re-building the snapshot on each
file invalidation.
It also moves to the approach of caching the FileHandles on the snapshot,
rather than in the goFile object, which is now not necessary.
Finally, this change shifts the logic of metadata invalidation into the
content invalidation step, so there is less logic to decide if we should
re-load a package or not.
Change-Id: I18387c385fb070da4db1302bf97035ce6328b5c3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197799
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Parse errors need to be treated separately from actual errors when
parsing a file. Parse errors are treated more like values, whereas
actual errors should not be propagated to the user. This enables us to
delete some of the special handling for context.Canceled errors.
Change-Id: I93a02f22b3f54beccbd6bcf26f04bb8da0202c25
Reviewed-on: https://go-review.googlesource.com/c/tools/+/195997
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We had too many options for functions to use to get type information for
a package. Now we stick with having one option to get the check package
handles, and then the caller can refine the results as needed.
Change-Id: I81f69a670e1539854ee23b6f364159a7de9b782f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194457
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This function incorrectly used cached packages to get ASTs and type
information that should have been directly found from the origin
package. Shift to using pkg.FindFile instead.
Change-Id: I9f73209bb1a1343f53b430150e78ffd180e14a44
Reviewed-on: https://go-review.googlesource.com/c/tools/+/195797
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change allows to remove some of the special handling for the
builtin package.
Change-Id: I105fcefd8812af2d42ff42edca954824c98db429
Reviewed-on: https://go-review.googlesource.com/c/tools/+/195758
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
In the case of documentation items for completion items, we should make
sure to use the ASTs and type information for the originating package.
To do this while avoiding race conditions, we have to do this by
breadth-first searching the top-level package and its dependencies.
Change-Id: Id657be969ca3e400bb2bbd769a82d88e91865764
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194477
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is a straight move of some code with no changes.
It splits the part of the telemetry code that will become a standalone library from the bit that belongs in the lsp.
Change-Id: Icedb6bf1f3711da9251450531729984df6df7787
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change eliminates the need for the package cache map, and instead
stores package type information in the store. We still have to maintain
invalidation logic because the key is not computed correctly.
Change-Id: I1c2a7502b99491ef0ff68d68c9f439503d531ff1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This relates to https://github.com/golang/go/issues/31374 and should switch all instances within `gopls` to use `x/errors` instead of `fmt` to create new errors.
Change-Id: I18339b75d12418d852e0dcc2ba0ed6c2970783b3
GitHub-Last-Rev: f4a55d9b79e7458ef1f1e06cb5eabbabd884f321
GitHub-Pull-Request: golang/tools#108
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179880
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change removes the need for the ast and token fields on the *goFile
object. We switch to using source.ParseGoHandles on the package, which
means that we can easily access both the AST and token via the package,
which is already cached.
Change-Id: I5f78bbe09362f4d95eb15556617bdbd809a7a55d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185878
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
also change the return type to be and end function and not an incomplete span
Change-Id: Icd99d93ac98a0f8088f33e905cf1ee3fe410c024
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185349
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds documentation to the completion items. This normally
should be done in completionItem/resolve, since it takes more time to
compute documentation. However, I am not sure if that latency incurred
by pre-computing documentation is actually significantly more than the
latency incurred by an extra call to 'completionItem/resolve'. This
needs to be investigated, so we begin by just precomputing all of the
documentation for each item.
Updates golang/go#29151
Change-Id: I148664d271cf3f1d089c1a871901e3ee404ffbe8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184721
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This uses the new opencensus compatability layer to add telementry to some of
the functions in the lsp, in order to allow us to understand their costs and
call patterns.
Change-Id: I7df820cd4eace7a4840ac6397d5df402369bf0a7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183419
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Instead of defaulting to a one sentence synopsis for documentation on
hover, allow the user to configure the amount of documentation they want
to see. Right now, the options are none, some (using go/doc.Synopsis),
or all. We should add a 4th, single-line, mode, which will allow clients
like vim-go to stop stripping off documentation on hover.
Updates golang/go#32561
Change-Id: I529242da84b794636984d5ef2918b7252886f0ef
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184797
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Often anonymous functions can be passed as arguments to a function. In
these cases, it can be annoying for a user to see signature help for the
entire duration of their writing this function. This change detects if
the user is typing in a function literal and disables signature help in
that case.
Fixesgolang/go#31633
Change-Id: I7166910739b6e1ec0da2ec852336136b81d13be0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184260
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Suzy Mueller <suzmue@golang.org>
This change correctly invalidates the cache when we
have to go from a trimmed to untrimmed AST.
The "ignoreFuncBodies" behavior is still disabled due to a racy test.
Updates golang/go#30309
Change-Id: I6b89d1d2140d77517616cb3956721a157c25ab71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180857
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change refactors hover to generate documentation for just the
declaration portion of an identifier.
Updates golang/go#29151
Change-Id: I16d48a99b56c36132e49cc87e2736f85c88ed14a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180657
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds support for definitions and hover for builtin types and
functions. It also includes some small (non-logic) changes to the import
spec definition function.
Additionally, there are some resulting changes in diagnostics to ignore
the builtin file but also use it for definitions (Ian, you were right
with your comment on my earlier review...).
Fixesgolang/go#31696
Change-Id: I52d43d010a5ca8359b539c33e40782877eb730d0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This abstracts out the concrete file type so that we can support non go files.
Change-Id: I7447daa2ce076ec2867de9e59a0dedfe1a0553f5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175217
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change uses the builtin package to derive the signature help for
builtin functions.
Updates golang/go#31696
Change-Id: I458b3a89bdf143e7018e8be7cb6a5e8c068a47c2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176922
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Now the "type" of a *ast.PkgName is the package it points to. Of
course, a package is not a real types.Type, but we can still jump you
there. We have to pick one of the package's files, so we choose the
longest one, hoping it is the most interesting.
Similarly, the "definition" of an *ast.ImportSpec is the package being
imported.
I also added a nil check for the package in SignatureHelp. This panics
for me occasionally.
Change-Id: Ide4640530a28bcec9da6de36723eb7f0e4cc941c
GitHub-Last-Rev: 8190baa0b908065db5b53f236de03d2f3bff39b5
GitHub-Pull-Request: golang/tools#92
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174081
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change uses an *ast.Package built from the file
go/src/builtin/builtin.go. Completion (and ultimately other features)
will be resolved using this AST instead of being hardcoded.
Change-Id: I3e34030b3236994faa484cf17cf75da511165133
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174381
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change separates the completion formatting functions from the
completion logic. It also simplifies the completion logic by necessary
values per-request into a struct that is used throughout.
Change-Id: Ieb6b09b7076ecf89c8b76ec12c1f1c9b10618cfe
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173779
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
- show signature for function calls whose function expression is not
an object (e.g. the second call in foo()()). since the function name
is not available, we use the generic "func"
- only provide signature help when the position is on or within the
call expression parens. this is consistent with the one other lsp
server i tried (java). this improves the gopls experience in emacs
where lsp-mode is constantly calling "hover" and
"signatureHelp" ("hover" should be preferred unless you are inside
the function params list)
- use the entire signature type string as the label since that includes
the return values, which are useful to see
- don't qualify the function name with its package. it looks funny to
see "bytes.Cap()" as the help when you are in a call
to (*bytes.Buffer).Cap(). it could be useful to include invocant
type info, but leave it out for now since signature help is meant to
focus on the function parameters.
- don't turn variadic args "foo ...int" into "foo []int" for the
parameter information (i.e. maintain it as "foo ...int")
- when determining active parameter, count the space before a
parameter name as being part of that parameter (e.g. the space
before "b" in "func(a int, b int)")
- handle variadic params when determining the active param (i.e.
highlight "foo(a int, *b ...string*)" on signature help for final
param in `foo(123, "a", "b", "c")`
- don't generate an extra space in formatParams() for unnamed
arguments
I also tweaked the signatureHelp server log message to include the
error message itself, and populated the server's logger in lsp_test.go
to aid in development.
Fixesgolang/go#31448
Change-Id: Iefe0e1e3c531d17197c0fa997b949174475a276c
GitHub-Last-Rev: 5c0b8ebd87a8c05d5d8f519ea096f94e89c77e2c
GitHub-Pull-Request: golang/tools#82
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172439
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change brings back handling for circular imports, which was removed
because I originally thought that go/packages would handle that.
However, since we are type-checking from source, we still end up having
to deal with that.
Additionally, we propagate the errors of type-checking to the
diagnostics so that the user can actually see some of the problems.
Change-Id: I0139bcaae461f1bcaf95706532bc5026f2430101
Reviewed-on: https://go-review.googlesource.com/c/tools/+/166882
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a Package interface to the source package, which allows
us to reduce the information cached per-package (we don't use any of the
unnecessary fields in a *go/packages.Package).
This change also adds an analysis cache for each package, which is used
to cache the results of analyses to avoid recomputation.
Change-Id: I56c6b5ed51126c27f46731c87ac4eeacc63cb81a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165750
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds an additional cache for type information, which here is
just a *packages.Package for each package. The metadata cache maintains
the import graph, which allows us to easily determine when a package X
(and therefore any other package that imports X) should be invalidated.
Additionally, rather than performing content changes as they happen, we
queue up content changes and apply them the next time that any type
information is requested.
Updates golang/go#30309
Change-Id: Iaf569f641f84ce69b0c0d5bdabbaa85635eeb8bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
we don't really use them, only generate them in cases where the failure is way more fundamental, and then also fail
to remember them for the next call to the same accessor. Better to not have them.
Change-Id: I0e8abeda688f5cc2a932ed95a80d89225c399f93
Reviewed-on: https://go-review.googlesource.com/c/162399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change separates a cache package out of the
golang.org/x/tools/internal/lsp/source package. The source package now
uses an interface instead a File struct, which will allow it be reused
more easily. The cache package contains the View and File structs now.
Change-Id: Ia2114e9dafc5214c8b21bceba3adae1c36b9799d
Reviewed-on: https://go-review.googlesource.com/c/152798
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Add SignatureHelp functionality to source package. Tests will be added
in a subsequent change.
Change-Id: Ia43280946d96a984c5741273a00c12255d637b2a
Reviewed-on: https://go-review.googlesource.com/c/149177
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
