The main goal is to push the package variant logic from internal/lsp
into internal/lsp/source so all users of internal/lsp/source benefit.
"references" and "rename" now have top-level source.References() and
source.Rename() entry points (as opposed to hanging off
source.Identifier()). I expanded objectsAtProtocolPos() to know about
implicit objects (type switch and import spec), and to
handle *ast.ImportSpec generically. This gets rid of special case
handling of *types.PkgName in various places.
The biggest practical benefit, though, is that "references" no longer
needs to compute the objectpath for every types.Object comparison it
does, instead using direct types.Object equality. This speeds up
"references" and "rename" a lot.
Two other notable improvements that fell out of not using
source.Identifier()'s logic:
- Finding references on an embedded field now shows references to the
field, not the type being embedded.
- Finding references on an imported object now works
correctly (previously it searched the importing package's dependents
rather than the imported package's dependents).
Finally, I refactored findIdentifier() to use pathEnclosingObjNode()
instead of astutil.PathEnclosingInterval. Now we only need a single
call to get the path because pathEnclosingObjNode() has the
"try pos || try pos-1" logic built in.
Change-Id: I667be9bed6ad83912404b90257c5c1485b3a7025
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211999
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves as much view initialization code into the
initialization function, instead of having it happen on view create.
Also, the `go env` variables that are collected at inconsistent times
are all collected on view creation. That is sufficient, since the view
is recreated if the environment changes.
I had originally hoped that the initial call to `go env` and the
-modfile detection could become part of this parallel initialization as
well, but you can't create a *packages.Config until the temporary
modfile has been set up, so it still makes sense to do that on view
create. This is, however, the reasoning behind the refactorings in
the -modfile detection in this CL. The main changes are a few renamings
and a split between snapshot.ModFiles and view.modFiles to maximize the
amount of work done in the view. I changed view.modfiles to moduleInformation
because I thought we might want to store additional information there at some
point. Rohan, please let me know if you disagree with any of the changes I made,
and I can revert them.
Fixesgolang/go#36487
Change-Id: I504db5a4f41b79bee99ebd391e32e7b520a19569
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214417
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
There is no reason for these functions to live on the view. They make
more sense as unexported functions in internal/lsp/source.
Initially, I had to propagate contexts through a lot of functions in
internal/lsp/source, but instead I removed the unused contexts forom
snapshot.GetFile.
Change-Id: I8323419d0356feb2010091fe8d3ed35e511f801a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214384
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change eliminates the extra step of calling GetFile on the view and
getting the FileHandle from the snapshot. It also eliminiates the
redundant source.File type. Follow up changes will clean up the file
kind handling, since it still exists on the fileBase type.
Change-Id: I635ab8632821b36e062be5151eaab425a5698f60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211778
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Clear out a few things I noticed aren't really used anymore.
Change-Id: I03f955015632197b56230ae0443cfb3871b54db2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211717
Run-TryBot: Muir Manders <muir@mnd.rs>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change fixes the link anchors for fields within a struct or
composite literal by getting the enclosing types.Type.
Fixesgolang/go#36138
Change-Id: I534a900fad6fa6fa1b1acaa5a63ca264c5d34c39
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211582
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change refactors some of the logic that builds a link anchor for
a given symbol, pushing the actual Link into the HoverInformation struct.
This is necessary because type information is needed to build up that
link in certain cases, like methods.
The last step will be to correctly display struct fields.
Updates golang/go#34240Fixesgolang/go#36031
Change-Id: I7f989faddbaa07f91838a870b4477bf78ce8ddf7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210201
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We previously only searched for implementations of the object we found
in the "widest" package variant. We instead need to search all
variants because each variant is type checked separately, and
implementations can be located in packages associated with different
variants.
For example, say you have:
-- foo/foo.go --
package foo
type Foo int
type Fooer interface { Foo() Foo }
-- foo/foo_test.go --
package foo
func TestFoo(t *testing.T) {}
-- bar/bar.go --
package bar
import "foo"
type impl struct {}
func (impl) Foo() foo.Foo { return 0 }
When you run find-implementations on the Fooer interface, we
previously would start from the (widest) foo.test's Fooer named
type. Unfortunately bar imports foo, not foo.test, so bar.impl
does not implement foo.test.Fooer. The specific reason is that
bar.impl.Foo returns foo.Foo, whereas foo.test.Fooer.Foo returns
foo.test.Foo, which are distinct *types.Named objects.
Starting our search instead from foo.Fooer resolves this issue.
However, we also need to search from foo.test.Fooer so we match any
implementations in foo_test.go.
Change-Id: I0b0039c98925410751c8f643c8ebd185340e409f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210459
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Previously, (*IdentifierInfo).References was returning the declaration
of the identifier among the reference results. This change alters the
behavior of this function to only ever return non-declaration
references. Declarations can be accessed through the
IdentifierInfo.Declaration field.
Fixesgolang/go#36007
Change-Id: I91d82b7e6d0d51a2468d3df67f666834d2905250
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210238
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Lack of context in error messages is making my life difficult. Add
context to a few, refactoring out some duplicate code along the way.
Change-Id: I3a940b12ec7c82b1ae1fc477694a2b8b45f6ff71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209860
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Running staticcheck on the entire workspace causes a slowdown, and most
likely users don't want to see staticcheck reports for every
subdirectory of their workspace. Only run staticcheck on open files.
Also, fixed a staticcheck warning that showed up along the way. Filed
golang/go#35718 to remind ourselves to fix all of the staticcheck warnings
that showed up when we ran gopls with staticcheck on x/tools.
Finally, made sure that we don't send empty diagnostics when diagnosing
the snapshot on start-up, as that is not necessary.
Change-Id: Ic51d1abfc80b1b53397057f06a4cfd7e2dc930f9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208098
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When packages.Load'ing cgo packages, the authored files show up in
GoFiles, and the generated files show up in CompiledGoFiles. We need the
AST and type information for the latter, since they're the only thing we
can type check. But we also need the contents (and column mapper) for
the authored file so that we can navigate into it.
Store GoFiles in package metadata and checked Packages. Parse the extra
files, just for their mappers. Refactor the View functions a little bit,
since there's only one place that actually needs to find the mapper for
a file.
Updates golang/go#35720.
Change-Id: I9f96872a9a592bf0e11da27ebd8976c6db8752c9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208502
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Type aliases don't work well with types.TypeString. Work around that by
using the AST to build this information. Follow up from CL 201677.
Fixesgolang/go#33500
Change-Id: I8b2d4ea238eb5d284a419f2b0bbf9655e69d434d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208497
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change cleans up internal/lsp/source/view.go to have a more logical
ordering and deletes the view.CheckPackageHandle function. Now, the only
way to get a CheckPackageHandle is through a snapshot (so all of the
corresponding edits).
Also, renamed fuzzy tests to fuzzymatch. Noticed this weird error when
debugging - I had golang.org/x/tools/internal/lsp/fuzzy in my module
cache and it conflicted with the test version.
Change-Id: Ib87836796a8e76e6b6ed1306c2a93e9a5db91cce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
As we improve support for cgo we'll need to reference GoFiles, not just
CompiledGoFiles. "Files" is right out.
I think I got everything that needs renaming but please let me know if
not.
Updates golang/go#35720.
Change-Id: I97a6ebf5b395535de0d5f4f8b3f84b46ca34643f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208101
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
None of the godef tests were running due to a mistake in the test
harness code. Fix them and re-enable.
We decided that the range for an import statement should be the whole
import path, not just the first character, so make that change and
adjust the PrepareRename tests accordingly.
Change-Id: I45756a78f2a1beb3c5180b5f288ce078075624bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207900
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change makes sure that we only return files that contain the given
position. There are a few instances of needing to look up files by URI
in the internal/lsp/cache package, so use an unexported package for
that. This allows us to remove some code in the implementations code.
Change-Id: Ifa7a62c67271826e6c632e4c88667d60f8b760c4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206880
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change encompasses the refactorings needed to correctly implement
CL 204079. The goal of this CL is to make the actual relevant diffs more
clear.
Change-Id: I38acfd436e2380be790910e01b6e37d8280e9100
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204139
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Now that we are using the memoize package to cache analysis results, we
can use that cache for suggested fixes.
Change-Id: I42905a6fe575f49d38979d53d58ea8ec59210ae0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/203278
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change effectively reverts CL 202039. This CL was a mistake, as it
creates a cycle. Snapshots hold CheckPackageHandles, which in turn hold
pkgs.
Change-Id: I944304cb365f0ef98b5e54ea38edea6cece40453
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202740
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
A package really should always be associated with its snapshot rather
than its view. This eliminates some extra parameters in a few utility
functions.
Change-Id: I60f9b7286e0072d3268602f6bd32052a3d2e5559
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202039
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This will prevent us from panicking in cases with errors.
Fixesgolang/go#34824
Change-Id: I02c20655f6926ec00c1591a905ff5a107cc44192
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200300
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change does not complete the work to handle snapshots correctly,
but it does implement the behavior of re-building the snapshot on each
file invalidation.
It also moves to the approach of caching the FileHandles on the snapshot,
rather than in the goFile object, which is now not necessary.
Finally, this change shifts the logic of metadata invalidation into the
content invalidation step, so there is less logic to decide if we should
re-load a package or not.
Change-Id: I18387c385fb070da4db1302bf97035ce6328b5c3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197799
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Parse errors need to be treated separately from actual errors when
parsing a file. Parse errors are treated more like values, whereas
actual errors should not be propagated to the user. This enables us to
delete some of the special handling for context.Canceled errors.
Change-Id: I93a02f22b3f54beccbd6bcf26f04bb8da0202c25
Reviewed-on: https://go-review.googlesource.com/c/tools/+/195997
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We had too many options for functions to use to get type information for
a package. Now we stick with having one option to get the check package
handles, and then the caller can refine the results as needed.
Change-Id: I81f69a670e1539854ee23b6f364159a7de9b782f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194457
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This function incorrectly used cached packages to get ASTs and type
information that should have been directly found from the origin
package. Shift to using pkg.FindFile instead.
Change-Id: I9f73209bb1a1343f53b430150e78ffd180e14a44
Reviewed-on: https://go-review.googlesource.com/c/tools/+/195797
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change allows to remove some of the special handling for the
builtin package.
Change-Id: I105fcefd8812af2d42ff42edca954824c98db429
Reviewed-on: https://go-review.googlesource.com/c/tools/+/195758
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
A mapper is always uniquely tied to a file at a specific version, so
just build it when we get a new *ast.File. We build the mapper using the
*token.File associated with the particular *ast.File, which is why there
is one per ParseGoHandle instead of FileHandle.
Change-Id: Ida40981ef91f6133cdd07e9793337fcd67510fba
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also, handle *ast.StarExpr in the identifier code. This fixes a specific
case with deep completions and documentation.
Change-Id: I630ae4e8f1c123ba1fdea85e6862ae93396e2cd4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194564
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
In the case of documentation items for completion items, we should make
sure to use the ASTs and type information for the originating package.
To do this while avoiding race conditions, we have to do this by
breadth-first searching the top-level package and its dependencies.
Change-Id: Id657be969ca3e400bb2bbd769a82d88e91865764
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194477
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Prepare rename gets the range of the identifier to rename. Returns an
error when there is no identifier to rename.
Change-Id: I5e5865bc9ff97e6a95ac4f0c48edddcfd0f9ed67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191170
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When there is an explicit name for an import spec, treat it as its own
identifier, separate from the import path.
Example:
import h "hello"
The name h is defined in that import spec, not in the package hello
it contains its own references. If asked about a position within the
import path, continue treating that as referencing the imported package.
If the position is within the name, use the identifier there that is
local to that file.
This change allows for go to definition of the explicit name to point to
itself, find all references from the import spec, and rename the
explicit name from the import spec.
Change-Id: Ia1d927a26e73f2dc450d256d71909c006bdf4c37
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191164
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is a straight move of some code with no changes.
It splits the part of the telemetry code that will become a standalone library from the bit that belongs in the lsp.
Change-Id: Icedb6bf1f3711da9251450531729984df6df7787
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change eliminates the need for the package cache map, and instead
stores package type information in the store. We still have to maintain
invalidation logic because the key is not computed correctly.
Change-Id: I1c2a7502b99491ef0ff68d68c9f439503d531ff1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change fixes documentation for completion items by using cached
package and AST information to derive the documentation. We also add
testing for documentation in completion items.
Change-Id: I911fb80f5cef88640fc06a9fe474e5da403657e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189237
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This relates to https://github.com/golang/go/issues/31374 and should switch all instances within `gopls` to use `x/errors` instead of `fmt` to create new errors.
Change-Id: I18339b75d12418d852e0dcc2ba0ed6c2970783b3
GitHub-Last-Rev: f4a55d9b79e7458ef1f1e06cb5eabbabd884f321
GitHub-Pull-Request: golang/tools#108
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179880
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change removes the need for the ast and token fields on the *goFile
object. We switch to using source.ParseGoHandles on the package, which
means that we can easily access both the AST and token via the package,
which is already cached.
Change-Id: I5f78bbe09362f4d95eb15556617bdbd809a7a55d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185878
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
also change the return type to be and end function and not an incomplete span
Change-Id: Icd99d93ac98a0f8088f33e905cf1ee3fe410c024
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185349
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Since 'IdentifierInfo' doesn't contain ast node of import spec,
gopls will construct an empty string under plaintext mode and
'```go\n\n```' under markdown mode for *ast.ImportSpec. For now,
the hovering result of import spec is the corresponding node
format.
Fixesgolang/go#33000
Change-Id: I4c25782ddb5bcc557ace82f46d480316b0b90509
GitHub-Last-Rev: 150728f401c5f9b161b557584ad3250f46e50869
GitHub-Pull-Request: golang/tools#134
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185357
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This uses the new opencensus compatability layer to add telementry to some of
the functions in the lsp, in order to allow us to understand their costs and
call patterns.
Change-Id: I7df820cd4eace7a4840ac6397d5df402369bf0a7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183419
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds supports for a package belonging to multiple files.
It requires additional packages.Loads for all of the packages to which a
file belongs (for example, if a non-test file also belongs to a package's
test variant).
For now, we re-run go/packages.Load for each file we open, regardless of
whether or not we already know about it.
This solves the issue of packages randomly belonging to a test or not.
Follow-up work needs to be done to support multiple packages in
references, rename, and diagnostics.
Fixesgolang/go#32791Fixesgolang/go#30100
Change-Id: I0a5870a05825fc16cc46d405ef50c775094b0fbb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183628
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change just separates minor changes made along the course of the
memoization CL out into their own change. This will clean up the diffs
in the memoization CL.
Change-Id: I7d59e05ba6472af5f1bf516b1e5b879a5815b9a5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183250
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Implicit local variables for type switches do not appear in the Uses
map and do not have objects associated with them. This change
associates all of the different types objects for the same local type
switch declaration with one another in the declaration.
The identifier for the implicit local variable does not have a type but
does have declaration objects.
Find references for type switch vars will return references to all the
identifiers in all of the case clauses and the declaration.
Fixesgolang/go#32584
Change-Id: I5563a2a48d31ca615c1e4e73b46eabca0f5dd72a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182462
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
