When this code was introduced, there were no R_MIPS, R_PPC64 and
R_390 and build would fail with this code uncommented.
Now we have those.
Change-Id: I18a54eaa250db12e293f8e4d1f080f1dd2e66a4f
Reviewed-on: https://go-review.googlesource.com/122896
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
As reported in #26650 and also cautioned on the man page
for fsync on OS X, fsync doesn't properly flush content
to permanent storage, and might cause corruption of data if
the OS crashes or if the drive loses power. Thus it is recommended
to use the F_FULLFSYNC fcntl, which flushes all buffered data to
permanent storage and is important for applications such as
databases that require a strict ordering of writes.
Also added a note in syscall_darwin.go that syscall.Fsync is
not invoked for os.File.Sync.
Fixes#26650.
Change-Id: Idecd9adbbdd640b9c5b02e73b60ed254c98b48b6
Reviewed-on: https://go-review.googlesource.com/130676
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This comment has been the source of much confusion and broken dreams. We
can add it back if a tool ever gets released.
Updates #16742
Change-Id: I4b9c179b7c60274e6ff1bcb607b82029dd9a893f
Reviewed-on: https://go-review.googlesource.com/130876
Reviewed-by: Matt Layher <mdlayher@gmail.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If two goroutines are racing on a map, one of them will exit
cleanly, clearing the hashWriting bit, and the other will
likely notice and panic. If we use XOR instead of OR to
set the bit in the first place, even numbers of racers will
hopefully all see the bit cleared and panic simultaneously,
giving the full set of available stacks. If a third racer
sneaks in, we are no worse than the current code, and
the generated code should be no more expensive.
In practice, this catches most racing goroutines even in
very tight races. See the demonstration program posted
on https://github.com/golang/go/issues/26703 for an example.
Fixes#26703
Change-Id: Idad17841a3127c24bd0a659b754734f70e307434
Reviewed-on: https://go-review.googlesource.com/126936
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Previously fmt would first obtain a list of map keys
and then look up the value for each key. Since NaNs can
be map keys but cannot be fetched directly, the lookup would
fail and return a zero reflect.Value, which formats as <nil>.
golang.org/cl/33572 added a map iterator to the reflect package
that is used in this CL to retrieve the key and value from
the map and prints the correct value even for keys that are not
equal to themselves.
Fixes#14427
Change-Id: I9e1522959760b3de8b7ecf7a6e67cd603339632a
Reviewed-on: https://go-review.googlesource.com/129777
Reviewed-by: Alan Donovan <adonovan@google.com>
Also remove lineno from typecheckdeftype since copytype was
the only user of it and typecheck uses lineno independently.
toolstach-check passed.
Updates #19683.
Change-Id: I1663fdb8cf519d505cc087c8657dcbff3c8b1a0a
Reviewed-on: https://go-review.googlesource.com/114875
Run-TryBot: Yury Smolsky <yury@smolsky.by>
Reviewed-by: Robert Griesemer <gri@golang.org>
Store the value of GOSSAFUNC in a global variable to avoid
multiple calls to os.Getenv from gc.buildssa and gc.mkinlcall1.
The latter is implemented in the CL 126606.
Updates #25942
Change-Id: I58caaef2fee23694d80dc5a561a2e809bf077fa4
Reviewed-on: https://go-review.googlesource.com/126604
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is causing failures on TryBots and BuildBots:
--- FAIL: TestGcSys (0.06s)
gc_test.go:27: expected "OK\n", but got "using too much memory: 39882752 bytes\n"
FAIL
Updates #27156
Change-Id: I418bbec89002574cd583c97422e433f042c07492
Reviewed-on: https://go-review.googlesource.com/130875
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Example of use:
iter := reflect.ValueOf(m).MapRange()
for iter.Next() {
k := iter.Key()
v := iter.Value()
...
}
See issue golang/go#11104
Q. Are there any benchmarks that would exercise the new calls to
copyval in existing code?
Change-Id: Ic469fcab5f1d9d853e76225f89bde01ee1d36e7a
Reviewed-on: https://go-review.googlesource.com/33572
Reviewed-by: Keith Randall <khr@golang.org>
This CL adds the "sources" column at the beginning of SSA table.
This column displays the source code for the function being passed
in the GOSSAFUNC env variable.
Also UI was extended so that clicking on particular line will
highlight all places this line is referenced.
JS code was cleaned and formatted.
This CL does not handle inlined functions. See issue 25904.
Change-Id: Ic7833a0b05e38795f4cf090f3dc82abf62d97026
Reviewed-on: https://go-review.googlesource.com/119035
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
I merged CL 115835 without testing it after a rebase. My bad.
Change-Id: I0acc6ed78ea7d718ac2df11d509cfcf4364dfaee
Reviewed-on: https://go-review.googlesource.com/130815
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Replaces legacy Go syntax for pointer struct member access
with more modern auto-deref alternative.
Found using https://go-critic.github.io/overview#underef-ref
Change-Id: I71a3c424126c4ff5d89f9e4bacb6cc01c6fa2ddf
Reviewed-on: https://go-review.googlesource.com/122895
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Replace `x[:]` where x is a slice with just `x`.
Found using https://go-critic.github.io/overview.html#unslice-ref
Change-Id: Ib0ee16e1d49b2a875b6b92a770049acc33208362
Reviewed-on: https://go-review.googlesource.com/123375
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The workthegc function was being inlined, and the slice did not
escape, so there was no memory allocation. Use a sink variable to
force memory allocation, at least for now.
Fixes#23343
Change-Id: I02f4618e343c8b6cb552cb4e9f272e112785f7cf
Reviewed-on: https://go-review.googlesource.com/122576
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The implementation of cputicks has been wrong for ppc64x. The
previous code sequence is for 32 bit, not 64 bit.
Change-Id: I308ae6cf9131f53a0100cd3f8ae4e16601f2d553
Reviewed-on: https://go-review.googlesource.com/129595
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The hasprefix function is redundant and can be removed since it has
the same implementation as hasPrefix modulo variable names.
Fixes#25688
Change-Id: I499cc24a2b5c38d1301718a4e66f555fd138386f
Reviewed-on: https://go-review.googlesource.com/115835
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
First, use a dummy slice access on decode64 and decode32 to ensure that
there is a single bounds check for src.
Second, move the PutUint64/PutUint32 calls out of these functions,
meaning that they are simpler and smaller. This may also open the door
to inlineability in the future, but for now, they both go past the
budget.
While at it, get rid of the ilen and olen variables, which have no
impact whatsoever on performance. At least, not measurable by any of the
benchmarks.
name old time/op new time/op delta
DecodeString/2-4 54.3ns ± 1% 55.2ns ± 2% +1.60% (p=0.017 n=5+6)
DecodeString/4-4 66.6ns ± 1% 66.8ns ± 2% ~ (p=0.903 n=6+6)
DecodeString/8-4 79.3ns ± 2% 79.6ns ± 1% ~ (p=0.448 n=6+6)
DecodeString/64-4 300ns ± 1% 281ns ± 3% -6.54% (p=0.002 n=6+6)
DecodeString/8192-4 27.4µs ± 1% 23.7µs ± 2% -13.47% (p=0.002 n=6+6)
name old speed new speed delta
DecodeString/2-4 73.7MB/s ± 1% 72.5MB/s ± 2% -1.55% (p=0.026 n=5+6)
DecodeString/4-4 120MB/s ± 1% 120MB/s ± 2% ~ (p=0.851 n=6+6)
DecodeString/8-4 151MB/s ± 2% 151MB/s ± 1% ~ (p=0.485 n=6+6)
DecodeString/64-4 292MB/s ± 1% 313MB/s ± 3% +7.03% (p=0.002 n=6+6)
DecodeString/8192-4 399MB/s ± 1% 461MB/s ± 2% +15.58% (p=0.002 n=6+6)
For #19636.
Change-Id: I0dfbdafa2a41dc4c582f63aef94b90b8e473731c
Reviewed-on: https://go-review.googlesource.com/113776
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Tests in test/safe were neglected after moving to the run.go
framework. This change restores them.
These tests are skipped for go/types via -+ option.
Fixes#25668
Change-Id: I8fe26574a76fa7afa8664c467d7c2e6334f1bba9
Reviewed-on: https://go-review.googlesource.com/124660
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When existing data in buffer does not have delimiter,
and new data is added with b.fill(), continue search from
previous point instead of starting from beginning.
Change-Id: Id78332afe2b0281b4a3c86bd1ffe9449cfea7848
GitHub-Last-Rev: 08e7d2f501
GitHub-Pull-Request: golang/go#25441
Reviewed-on: https://go-review.googlesource.com/113535
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also adjust some comments to where they belong.
Change-Id: Ifbb38052401b0d33d7bb9800f56a20ce8f39c25f
Reviewed-on: https://go-review.googlesource.com/127761
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
As per commit aa0ae75, handling of io.ErrShortWrite is done in
*File.Write() itself.
Change-Id: I92924b51e8df2ae88e6e50318348f44973addba8
Reviewed-on: https://go-review.googlesource.com/113696
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These are artifacts originating from C->Go translation.
Change-Id: Ib5cdcaf42f43f3968482892fb4945e19ef38bd6d
Reviewed-on: https://go-review.googlesource.com/121795
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Some WriteByte('\\') calls can be deduplicated.
fillField is used in two occasions, but it is unnecessary when adding
fields to the "next" stack, as those aren't used for the final encoding.
Inline the func with its only remaining call.
Finally, unindent a default-if block.
The performance of the encoder is unaffected:
name old time/op new time/op delta
CodeEncoder-4 6.65ms ± 1% 6.65ms ± 0% ~ (p=0.662 n=6+5)
Change-Id: Ie55baeab89abad9b9f13e9f6ca886a670c30dba9
Reviewed-on: https://go-review.googlesource.com/122461
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A number of explicit function literals found through the
unlambda linter are removed.
Fixes#26802
Change-Id: I0b122bdd95e9cb804c77efe20483fdf681c8154e
Reviewed-on: https://go-review.googlesource.com/127756
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
This function was only used in a single place - in the field encoding
loop within the struct encoder.
Inlining the function call manually lets us get rid of the call
overhead. But most importantly, it lets us simplify the logic afterward.
We no longer need to use reflect.Value{} and !fv.IsValid(), as we can
skip the field immediately.
The two factors combined (mostly just the latter) give a moderate speed
improvement to this hot loop.
name old time/op new time/op delta
CodeEncoder-4 6.01ms ± 1% 5.91ms ± 1% -1.66% (p=0.002 n=6+6)
name old speed new speed delta
CodeEncoder-4 323MB/s ± 1% 328MB/s ± 1% +1.69% (p=0.002 n=6+6)
Updates #5683.
Change-Id: I12757c325a68abb2856026cf719c122612a1f38e
Reviewed-on: https://go-review.googlesource.com/125417
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
structEncoder had two slices - the list of fields, and a list containing
the encoder for each field. structEncoder.encode then looped over the
fields, and indexed into the second slice to grab the field encoder.
However, this makes it very hard for the compiler to be able to prove
that the two slices always have the same length, and that the index
expression doesn't need a bounds check.
Merge the two slices into one to completely remove the need for bounds
checks in the hot loop.
While at it, don't copy the field elements when ranging, which greatly
speeds up the hot loop in structEncoder.
name old time/op new time/op delta
CodeEncoder-4 6.18ms ± 0% 5.56ms ± 0% -10.08% (p=0.002 n=6+6)
name old speed new speed delta
CodeEncoder-4 314MB/s ± 0% 349MB/s ± 0% +11.21% (p=0.002 n=6+6)
name old alloc/op new alloc/op delta
CodeEncoder-4 93.2kB ± 0% 62.1kB ± 0% -33.33% (p=0.002 n=6+6)
Updates #5683.
Change-Id: I0dd47783530f439b125e084aede09dda172eb1e8
Reviewed-on: https://go-review.googlesource.com/125416
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The unexported field is hidden from reflect based marshalers, which
would break otherwise. Also, make it return an error, as there are
multiple reasons it might fail.
Fixes#27125
Change-Id: I92adade2fe456103d2d5c0315629ca0256953764
Reviewed-on: https://go-review.googlesource.com/130535
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since the 12.x branch, the getrandom syscall had been introduced
with similar interface as Linux's and consistent syscall id
across architectures.
Change-Id: I63d6b45dbe9e29f07f1b5b6c2ec8be4fa624b9ee
GitHub-Last-Rev: 6fb76e6522
GitHub-Pull-Request: golang/go#25976
Reviewed-on: https://go-review.googlesource.com/120055
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
_GoStringLen performs an implicit conversion from intgo to size_t.
Explicitly cast to size_t.
This change avoids warnings when using cgo with CFLAGS:
-Wconversion.
Change-Id: I58f75a35e17f669a67f9805061c041b03eddbb5c
GitHub-Last-Rev: b5df1ac0c3
GitHub-Pull-Request: golang/go#27092
Reviewed-on: https://go-review.googlesource.com/129820
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
