This change trims the function bodies from the ASTs of files belonging to
dependency packages. In these cases, we do not necessarily need full
file ASTs, so it's not necessary to store the function bodies in memory.
This change will reduce memory usage. However, it will also slow down
the case of a user opening a file in a dependency package, as we will
have to re-typecheck the file to get the full AST. Hopefully, this
increase in latency will not be significant, as we will only need to
re-typecheck a single package (all the dependencies should be cached).
Updates golang/go#30309
Change-Id: I7871ae44499c851d1097087bd9d3567bb27db691
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178719
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change fixes a regression introduced by the building the builtin
package on demand. Although this change increases the startup tasks of
gopls, it is necessary to ensure that we ignore diagnostics from
builtin.go.
Change-Id: I897e747a273056d70cecba486a74c75a736d8f80
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179921
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
There were several returns in this function that could leak both the
wg.Done() and <-ioLimit. This refactors them into defers close to their
counterparts.
Additionally I refactored the function to favor early returns over
nested if statements.
Fixesgolang/go#32368
Change-Id: I5357d11ee526c1cb7a6bd1a0f652c61d574c10ab
GitHub-Last-Rev: bfa160b9fd75c4464d2e0a2820c04ddae01de21f
GitHub-Pull-Request: golang/tools#107
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179878
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
This change fixes the test failure that has appeared in a few TryBot
runs.
Change-Id: If583555250d63b7f446ec7d8eb09810b842633ae
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179437
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a stub modFile struct for use in the future. It also
moves the singleDiagnostic function out into the lsp package, so that
the source package does not make decisions about what to show to the
user as a diagnostic.
Fixesgolang/go#32221
Change-Id: I577c66fcd3c1daadaa221b52ff36bfa0fe07fb53
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178681
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The Go file changes didn't actually check the file extensions for the
files the Go extension is receiving. This error was not noticed because
the VSCode extension doesn't yet actually send mod files to gopls yet,
but it will in its next release.
Fixesgolang/go#32178
Change-Id: Ia04d0a92ce7df13fcf4c601421bc000d69855f6d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178679
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This moves the fileset down to the base cache, the overlays down to the session
and stores the environment on the view.
packages.Config is no longer part of any public API, and the config is build on
demand by combining all the layers of cache.
Also added some documentation to the main source pacakge interfaces.
Change-Id: I058092ad2275d433864d1f58576fc55e194607a6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178017
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds support for definitions and hover for builtin types and
functions. It also includes some small (non-logic) changes to the import
spec definition function.
Additionally, there are some resulting changes in diagnostics to ignore
the builtin file but also use it for definitions (Ian, you were right
with your comment on my earlier review...).
Fixesgolang/go#31696
Change-Id: I52d43d010a5ca8359b539c33e40782877eb730d0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is primarily to separate the levels because they have different cache
lifetimes and sharability.
This will allow us to share results between views and even between servers.
Change-Id: I280ca19d17a6ea8a15e48637d4445e2b6cf04769
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177518
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This abstracts out the concrete file type so that we can support non go files.
Change-Id: I7447daa2ce076ec2867de9e59a0dedfe1a0553f5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175217
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We correcly cancel all background tasks and drop all active views when
the server is asked to shut down now.
This was mostly to support the command line being able to exit cleanly
Change-Id: Iff9f5ab51572aad5e3245dc01aa87b00dcd47963
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174940
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The cache now exposes only one symbol, NewView
This is preparing the cache for a re-write
Change-Id: I411c2cd7a7edc2e7c774218c6786f9fd4fcc53cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176924
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change stops diagnostics from running in files making up the "fake"
builtin package.
Fixesgolang/go#31962
Change-Id: Ic54e1587e3ad54f0c1f5e82f1a6f3522b4c6bee9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177218
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Now the "type" of a *ast.PkgName is the package it points to. Of
course, a package is not a real types.Type, but we can still jump you
there. We have to pick one of the package's files, so we choose the
longest one, hoping it is the most interesting.
Similarly, the "definition" of an *ast.ImportSpec is the package being
imported.
I also added a nil check for the package in SignatureHelp. This panics
for me occasionally.
Change-Id: Ide4640530a28bcec9da6de36723eb7f0e4cc941c
GitHub-Last-Rev: 8190baa0b908065db5b53f236de03d2f3bff39b5
GitHub-Pull-Request: golang/tools#92
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174081
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Prior to this change, if a package was rendered invalid by a change in
one of its dependencies, diagnostics would not be propagated until the
user typed in one of the package's files. Now, these updated diagnostics
are sent along with the diagnostics for the dependency.
Fixesgolang/go#29817
Change-Id: I4761de31c4bdee820e024005f6112b3b3d2e1da6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174977
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change uses an *ast.Package built from the file
go/src/builtin/builtin.go. Completion (and ultimately other features)
will be resolved using this AST instead of being hardcoded.
Change-Id: I3e34030b3236994faa484cf17cf75da511165133
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174381
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The "analyses" cache in lsp/cache.(*Package).GetActionGraph was not
getting cleared on errors. This could result in future calls to
GetActionGraph waiting on the "ready" channel indefinitely. This in
turn caused the goroutine in cacheAndDiagnose to block indefinitely
and never send the diagnostic results back.
Now we use a defer statement to always close the channel. If we did
not succeed, we also clear out the cache entry and set a "succeeded =
false" flag to signal waiters that they need to retry. If in the
future errors other than context.Canceled/Timeout are possible, this
retry behavior may need to be revisited.
Fixesgolang/go#30786
Change-Id: Icacc9188f1500b00f2178521ce373a2c1363f932
GitHub-Last-Rev: 7c43afd4286a69b0d35a625716e6934c72c4cef5
GitHub-Pull-Request: golang/tools#91
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173977
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This will allow us to surface these errors as diagnostics.
Change-Id: Ic8ad11ba43c08be6f391c0e2aa95015183461133
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173780
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change adds support for completion of incomplete selectors after a
defer or go statement. We modify the AST before type-checking it with a
fake *ast.CallExpr.
Updates golang/go#29313
Change-Id: Ic9e8c9c49aa569cd7874791692c70a28c3146251
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172974
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change associates an ast.Node for some object declarations.
In this case, we only handle type declarations, but future changes will
support other objects as well. This is the first step in adding
documentation on hover.
Updates golang/go#29151
Change-Id: I39ddccf4130ee3b106725286375cd74bc51bcd38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172661
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds support in go/packages for defining an entire package
in an overlay. We also add corresponding tests for this in gopls, to
confirm that it works as expected.
Fixesgolang/go#31467
Change-Id: Iead203ab2964a7ac4f571be97624b725ac5de7e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172409
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This uses the workspace folders to build multiple views, and then tries to pick
the right view to send each incomming request to.
Change-Id: I0cc896dbbc67eb0a88225ddeca6c518f4258bbba
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170179
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Also use it for errors that were otherwise silently dropped
This makes it much easier to debug problems.
Also added command line control over whether the rpc trace messages are printed, which allows you to read the
log, otherwise the file edit messages swamp the log.
Change-Id: I7b70fd18034a87b2964e6d6d5f6f33dcaf7d8ea8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170178
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change also fixes the corresponding code in go/packages, which was
actually not filling in the TypesSizes if the bit was set.
Change-Id: I2d5a849045768a81c94218eb41da2faec26189a3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170010
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change allows us to return diagnostics in the case of a file that
doesn't exist.
Change-Id: I6275c0dc9103a3f44070919937afe27c64545828
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170009
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This connects up the configuration message, and uses it to allow the client to set the environment
in the config passed to packages.Load
Change-Id: I75e03c01c74e9b11c8b4c47b9cbdd0574cddf778
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169704
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Instead of using a simple path map we now attempt to match files with
os.SameFile with fast paths for exact path matches. This should fix issues both
with symlinked directories (the mac tmp folder) and with case sensitivity
(windows)
Change-Id: I014dd01f89d08a348e7de7697cbc3a2512a6e5b3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169699
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change brings back handling for circular imports, which was removed
because I originally thought that go/packages would handle that.
However, since we are type-checking from source, we still end up having
to deal with that.
Additionally, we propagate the errors of type-checking to the
diagnostics so that the user can actually see some of the problems.
Change-Id: I0139bcaae461f1bcaf95706532bc5026f2430101
Reviewed-on: https://go-review.googlesource.com/c/tools/+/166882
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a Package interface to the source package, which allows
us to reduce the information cached per-package (we don't use any of the
unnecessary fields in a *go/packages.Package).
This change also adds an analysis cache for each package, which is used
to cache the results of analyses to avoid recomputation.
Change-Id: I56c6b5ed51126c27f46731c87ac4eeacc63cb81a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165750
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds an additional cache for type information, which here is
just a *packages.Package for each package. The metadata cache maintains
the import graph, which allows us to easily determine when a package X
(and therefore any other package that imports X) should be invalidated.
Additionally, rather than performing content changes as they happen, we
queue up content changes and apply them the next time that any type
information is requested.
Updates golang/go#30309
Change-Id: Iaf569f641f84ce69b0c0d5bdabbaa85635eeb8bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Instead of calling packages.Load on every character change, we reparse
the import declarations of the file and determine if they have
changed. We also introduce a metadata cache that caches the import
graph. This is used in type-checking and only updated on calls to
packages.Load.
Change-Id: I7cb384aba77ef3c1565d3b0db58e6c754d5fed15
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165137
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Separate out functions to make the code more readable.
Change-Id: I4c48a8343ba5666de375c43499420bdf244aafd1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165022
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Also, separate type-checking logic into its own file.
go/packages returns import cycle errors anyway, so we just return them instead.
Change-Id: I1f524cdf81e1f9655c1b0afd50dd2aeaa167bb2f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165021
Reviewed-by: Michael Matloob <matloob@golang.org>
