Add corresponding rules and a couple of examples.
Fixes#50202.
Change-Id: I4287b5e2d0fd29a0c871795e07f1bb529c9c6004
Reviewed-on: https://go-review.googlesource.com/c/go/+/384240
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change in terminology prevents potential confusion
that migth be caused by associating "structural type"
with "structural typing"; the two are not connected.
Also, adjusted introductory paragraph of section on
constraint type inference: type inference goes in both
directions, from type parameter to core type and vice
versa. The previous description was not quite accurate.
Change-Id: If4ca300f525eea660f68486302619aa6ad5dbc2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/384238
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The terms "integer type", "floating-point type", and "complex type"
are used frequently in the spec but are not explicitly (only indirectly)
defined.
Slightly rephrased the section on numeric types and introduce these
terms explicitly. Add links to this section.
Change-Id: I3fb888933bece047da8b356b684c855618e9aee4
Reviewed-on: https://go-review.googlesource.com/c/go/+/384157
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Ic338788d6410ed0d09ad129811377ee9ce5ed496
Reviewed-on: https://go-review.googlesource.com/c/go/+/367954
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 380854.
Per the conluding discussions on #50791. A follow-up will
document `comparable` more thoroughly.
For #50791.
Change-Id: I15db9051784a012f713e28d725c3b8bbfeb40569
Reviewed-on: https://go-review.googlesource.com/c/go/+/381076
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mostly from CL 367954.
Change-Id: Id003b0f785a286a1a649e4d6e8c87d0418a36545
Reviewed-on: https://go-review.googlesource.com/c/go/+/379920
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Introduce a (local) notion of a set of representative types,
which serves as a representation/approximation of an
interface's actual type set. If the set of representative
types is is non-empty and finite, it corresponds to the set
of specific types of the interface.
In the implementation, the set of representative types serves
as a finite representation of an interface's type set, together
with the set of methods.
Change-Id: Ib4c6cd5e17b81197672e4247be9737dd2cb6b56f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376834
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Problem pointed out on golang-nuts mailing list.
Change-Id: If1c9b22e1ed7b4ec7ebcaadc80fa450333e6856c
Reviewed-on: https://go-review.googlesource.com/c/go/+/375799
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The new description matches the implementation (CL 370774).
Also, in the section on type constraints, use "defines" instead of
"determines" because the constraint interface defines the type set
which is precisely the set of acceptable type arguments.
For #49482.
Change-Id: I6f30f49100e8ba8bec0a0f1b450f88cae54312eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/372874
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #49602.
Change-Id: I0d3ff8f087dffb3409918494147fd1dceff7514d
Reviewed-on: https://go-review.googlesource.com/c/go/+/372694
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As written, the conversion P(x), where P and the type
of x are type parameters with identical underlying types
(i.e., identical constraints), is valid. However, unless
the type of x and P are identical (which is covered with
the assignability rule), such a conversion is not valid
in general (consider the case where both type parameters
are different type parameters with constraint "any").
This change adjusts the rules to prohibit type parameters
in this case. The same reasoning applies and the analogue
change is made for pointer types.
The type checker already implements these updated rules.
Change-Id: Id90187900cb2820f6a0a0cf582cf26cdf8addbce
Reviewed-on: https://go-review.googlesource.com/c/go/+/371074
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I562d4648756e710020ee491f3801896563a89baa
Reviewed-on: https://go-review.googlesource.com/c/go/+/367395
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We want to support some special cases for index expressions, len, and
cap on operands of type parameters (such as indexing a value constrained
by byte slices and strings), hence the extra rules.
Change-Id: I4a07dc7e64bb47361b021d606c52eae1784d5430
Reviewed-on: https://go-review.googlesource.com/c/go/+/366814
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
- fix definition of "specific types" and add more examples
- state that a parameterized function must be instantiated
when used as a function value
- remove duplicate word ("can can" -> "can")
Thanks to @danscales for finding these.
Change-Id: Ideb41efc35a3e67694d3bc97e462454feae37c44
Reviewed-on: https://go-review.googlesource.com/c/go/+/367394
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This change corrects the link `Instantiantions` to `Instantiations` in the spec.
Change-Id: Ib0ed03420ae401d20af1ea723c5487018b2f462d
GitHub-Last-Rev: b84316c818
GitHub-Pull-Request: golang/go#49816
Reviewed-on: https://go-review.googlesource.com/c/go/+/367274
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Change-Id: I11111b3617673be94508128489aed6488d518537
Reviewed-on: https://go-review.googlesource.com/c/go/+/366834
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I5ffc7f26236487070447eaa0f6b14d1fab44c3c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/366794
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I2770da87b4c977b51dfa046f2f08283917675e1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/365916
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Change-Id: I7bfddf4be0d1d95419f312bb349ae2e16b74b795
Reviewed-on: https://go-review.googlesource.com/c/go/+/365915
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I3c4d8bdb5e92ee7fdca9593fb043f94f467755e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/365434
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I4423a059527066c4418c195911f8184dfd3f5a15
Reviewed-on: https://go-review.googlesource.com/c/go/+/365914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The notion of specific types will be used to define rules for
assignability, convertability, etc. when type parameters are
involved.
Change-Id: Ic5c134261e2a9fe05cdf25efd342f052458ab5c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/366754
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Thanks to @danscales for noticing the mistake.
Change-Id: I547ee80a78419765b82d39d7b34dc8d3bf962c35
Reviewed-on: https://go-review.googlesource.com/c/go/+/366215
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This change introduces the notion of a structural interface
and its corresponding structural type.
Change-Id: Ib5442dfd04cb5950b4467428cae51849f8922272
Reviewed-on: https://go-review.googlesource.com/c/go/+/365474
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- add section on type parameters
- added two sections on the scope of type parameters
- expanded general section on types accordingly
- introduced the notion of a named type which will
help in simplifying various rules (subsequent CLs)
Change-Id: I49c1ed7d6d4f951d751f0a3ca5dfb637e49829f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/365414
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I29e9188a0fa1326c2755a9b86aeb47feaa8019be
Reviewed-on: https://go-review.googlesource.com/c/go/+/365274
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- fixed a typo in the method set section
- express in the syntax that ~T denotes an underlying type
- be more precise when talking about types vs type terms
- refer to "unions" rather than "union expressions"
- make it clear in the spec title that this is WIP
Change-Id: I9b2c4b1f77bc50dd574ed6893bedd40529c320fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/365154
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is the first of several CLs that update the existing
Go 1.17 spec for type parameters.
This CL updates the section on method sets and interface types.
It also adds "any", "comparable" to the list of predeclared
identifiers.
Change-Id: I0ce25dc02791c33150c0d949528512610faf3eab
Reviewed-on: https://go-review.googlesource.com/c/go/+/362999
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Thanks for jtagcat@ for finding this.
Change-Id: If7324808edbae19ec8bf503b04e0426f3fb3b47a
Reviewed-on: https://go-review.googlesource.com/c/go/+/363394
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Thanks to @bodar (Github) for finding this.
Fixes#48422.
Change-Id: I031c3d82a02db1d204e2b86b494d89784d37f073
Reviewed-on: https://go-review.googlesource.com/c/go/+/350409
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 85215 added prose to provide some minimal intuition for the
definition of a "terminating statement". While the original definition
was perfectly fine, the added prose was actually incorrect: If the
terminating statement is a goto, it might jump to a labeled statement
following that goto in the same block (it could be the very next
statement), and thus a terminating statement does not in fact
"prevent execution of all statements that lexically appear after
it in the same block".
Rather than explaining the special case for gotos with targets that
are lexically following the goto in the same block, this CL opts for
a simpler approach.
Thanks to @3bodar (Github) for finding this.
Fixes#48323.
Change-Id: I8031346250341d038938a1ce6a75d3e687d32c37
Reviewed-on: https://go-review.googlesource.com/c/go/+/349172
Trust: Robert Griesemer <gri@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
So it's clear to the reader that if "M" is a promoted method from
embedded field "T", then "x.M" will be expanded to "x.T.M" during the
evaluation of the method value.
Fixes#47863
Change-Id: Id3b82127a2054584b6842c487f6e15c3102dc9fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/344209
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There is an example for nil slice already, so adding example for non-nil
zero length slice, too, clarifying to the reader that the result is also
non-nil and different from nil slice case.
Updates #395
Change-Id: I019db1b1a1c0c621161ecaaacab5a4d888764b1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/336890
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #19367
Change-Id: If0ff8ddba3b6b48e2e198cf3653e73284c7572a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/332409
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add unsafe.Add and unsafe.Slice to the list of built-in functions
which are not permitted in statement context. The compiler and
type checker already enforce this restriction, this just fixes
a documentation oversight.
For #19367.
For #40481.
Change-Id: Iabc63a8db048eaf40a5f5b5573fdf00b79d54119
Reviewed-on: https://go-review.googlesource.com/c/go/+/329925
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The word "specifier" is used once only here and technically not defined.
Change-Id: Ifc9f0582f4eb3c3011ba60d8008234de511d4be6
Reviewed-on: https://go-review.googlesource.com/c/go/+/323730
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Replace "reserved word" by "keyword" as the latter is the official term.
Change-Id: I9f269759b872026034a9f47e4a761cff2d348ca0
Reviewed-on: https://go-review.googlesource.com/c/go/+/323729
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
1. The existing prose implied that a switch expression type must
be comparable because it is tested for equality against all case
expressions. But for an empty switch (no case expressions), it
was not clear if the switch expression needed to be comparable.
Require it to match the behavior of compiler and type checkers.
2. While making this change, remove redundant language explaining
what happens with untyped boolean switch expression values: the
default type of an untyped boolean value is bool, this is already
covered by the first part of the relevant sentence.
Fixes#43200.
Change-Id: Id8e0f29cfa8722b57cd2b7b58cba85b58c5f842b
Reviewed-on: https://go-review.googlesource.com/c/go/+/314411
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
In Go1.13 and above, signed integers are permitted as shift counts as long as they are >=0.
However, the comments in the "Arithmetic operators" section says shift operators accept "unsigned integer" as of right operands. Replacing this with "integer>=0" resolves the misunderstanding that shift
operators permit only unsigned integers.
Reference: Go1.13 Release Notes: https://golang.org/doc/go1.13
Change-Id: Icd3c7734d539ab702590e992a618c9251c653c37
GitHub-Last-Rev: 4f263a48d3
GitHub-Pull-Request: golang/go#44664
Reviewed-on: https://go-review.googlesource.com/c/go/+/297249
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Change-Id: I453d06da2f596eb0b99905aec46a05547d73c62c
Reviewed-on: https://go-review.googlesource.com/c/go/+/290872
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The spec states that a type "may" have a method set associated with it.
Yet every type has a method set, which may be empty. This is clarified
later in the same paragraph. Be clear in the first sentence as well.
Per the suggestion from https://github.com/DQNEO.
Fixes#44318.
Change-Id: I6097b1c7062853e404b7fead56d18a7f9c576fc3
Reviewed-on: https://go-review.googlesource.com/c/go/+/292853
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A caller is not always in a function.
For example, a call can appear in top level declarations.
e.g. var x = f()
Change-Id: I29c4c3b7663249434fb2b8a6d0003267c77268cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/290849
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Griesemer <gri@golang.org>
The example, var v, ok T1 = x.(T), can be interpreted as type T1 interface{} or type T = bool; type T1 = T.
Separating the example would help understanding for readers.
Change-Id: I179f4564e67f4d503815d29307df2cebb50c82f9
GitHub-Last-Rev: b34fffb6bb
GitHub-Pull-Request: golang/go#44040
Reviewed-on: https://go-review.googlesource.com/c/go/+/288472
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
In the current (pre-CL) version of the spec, the 2nd last shift
example appears to be using the array declared in the last example.
On a 32-bit platform, that array would have length 0, which would
lead to a panic in the 2nd last example. Also, if this code were
inside a function, it wouldn't compile (array declared after use).
Use an explicitly declared array for that specific shift example.
Also, split out all cases that produce different results for 32-
vs 64-bit ints.
Fixes#41835.
Change-Id: Ie45114224509e4999197226f91f7f6f934449abb
Reviewed-on: https://go-review.googlesource.com/c/go/+/260398
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Suggested by @yaxinlx.
Fixes#41612.
Change-Id: I98b9968a95d090ee3c67ff02678e1874e6d98c33
Reviewed-on: https://go-review.googlesource.com/c/go/+/257159
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The HTML linter 'tidy' reports:
go_spec.html:2556: Warning: unescaped & which should be written as &
go_spec.html:3293: Warning: unescaped & or unknown entity "&s1"
go_spec.html:3293: Warning: unescaped & or unknown entity "&a"
go_spec.html:3294: Warning: unescaped & or unknown entity "&s2"
go_spec.html:3294: Warning: unescaped & or unknown entity "&a"
go_spec.html:2045: Warning: trimming empty <p>
go_spec.html:4526: Warning: trimming empty <ul>
go_spec.html:4533: Warning: trimming empty <ul>
go_spec.html:4539: Warning: trimming empty <ul>
This CL fixes all but the <ul> ones, which I think should be fixed
but are defended by a comment.
Change-Id: I0ca88f5e80755024801877ab1298025ecf8f10c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/214457
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Since the word "regular" has a precise meaning in the context of
formal languages, the Introduction sentence claiming that Go's grammar
is "compact and regular" may mislead readers.
Reword it using Rob's suggestion.
Fixes#36037
Change-Id: I00c1a5714bdab8878d9a77b36d67dae67d63da0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/211277
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
In preparation for the forthcoming spec changes for #6977.
While at it, modernize existing File example that dates
back all the way to commit 18c5b488a3.
Change-Id: Id10e4df0513e3de15bd58867222923eefa9473ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/187978
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The spec was not very precise as to what happens with respect to sharing
if a sliced operand is (a pointer to) an array. Added a small clarification
and a supporting example.
Fixes#31689.
Change-Id: Ic49351bec2033abd3f5428154ec3e9a7c2c9eaa5
Reviewed-on: https://go-review.googlesource.com/c/go/+/177139
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add a small paragraph and example pointing out
the difference for the case where T is a slice
or map. This is a common error for Go novices.
Fixes#29425.
Change-Id: Icdb59f25361e9f6a09b190fbfcc9ae0c7d90077b
Reviewed-on: https://go-review.googlesource.com/c/go/+/176338
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The very first paragraph on "Package initialization" stated that
"variables are initialized in declaration order, but after any
variables they might depend on". This phrasing was easily
misread as "declaration order is the first sorting criteria"
and then contradicted what the subsequent paragraphs spelled
out in precise detail.
Instead, variable initialization proceeds by repeatedly determining
a set of ready to initialize variables, and then selecting from that
set the variable declared earliest. That is, declaration order is the
second sorting criteria.
Also, for the purpose of variable initialization, declarations
introducing blank (_) variables are considered like any other
variables (their initialization expressions may have side-effects
and affect initialization order), even though blank identifiers
are not "declared".
This CL adds clarifying language regarding these two issues
and the supporting example.
Both gccgo and go/types implement this behavior. cmd/compile
has a long-standing issue (#22326).
The spec also did not state in which order multiple variables
initialized by a single (multi-value) initialization expression are
handled. This CL adds a clarifying paragraph: If any such variable
is initialized, all that declaration's variables are initialized at
the same time.
This behavior matches user expectation: We are not expecting to
observe partially initialized sets of variables in declarations
such as "var a, b, c = f()".
It also matches existing cmd/compile and go/types (but not gccgo)
behavior.
Finally, cmd/compile, gccgo, and go/types produce different
initialization orders in (esoteric) cases where hidden (not
detected with existing rules) dependencies exist. Added a
sentence and example clarifying how much leeway compilers have
in those situations. The goal is to preserve the ability to
use static initialization while at the same time maintain
the relative initialization order of variables with detected
dependencies.
Fixes #31292.
Updates #22326.
Change-Id: I0a369abff8cfce27afc975998db875f5c580caa2
Reviewed-on: https://go-review.googlesource.com/c/go/+/175980
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL documents the new binary and octal integer literals,
hexadecimal floats, generalized imaginary literals and digit
separators for all number literals in the spec.
Added empty lines between abutting paragraphs in some places
(a more thorough cleanup can be done in a separate CL).
A minor detail: A single 0 was considered an octal zero per the
syntax (decimal integer literals always started with a non-zero
digit). The new octal literal syntax allows 0o and 0O prefixes
and when keeping the respective octal_lit syntax symmetric with
all the others (binary_lit, hex_lit), a single 0 is not automatically
part of it anymore. Rather than complicating the new octal_lit syntax
to include 0 as before, it is simpler (and more natural) to accept
a single 0 as part of a decimal_lit. This is purely a notational
change.
R=Go1.13
Updates #12711.
Updates #19308.
Updates #28493.
Updates #29008.
Change-Id: Ib9fdc6e781f6031cceeed37aaed9d05c7141adec
Reviewed-on: https://go-review.googlesource.com/c/go/+/161098
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This text changed in CL 139099 to add "explicit" in front of "conversion".
But now "explicit conversion or assignment" reads like it might mean
"explicit [conversion or assignment]" when what is meant is
"[explicit conversion] or assignment". To make clear that explicit does
not apply to assignment, use "assignment or explicit conversion".
Change-Id: I8ff7a5b3ecd9f562793502fa6808242f22264f28
Reviewed-on: https://go-review.googlesource.com/c/149340
Reviewed-by: Robert Griesemer <gri@golang.org>
Adjusted spec to explicitly define the string length as the
number of bytes of the string; the prose now matches the prose
for arrays. Made analogous change for slices.
Fixes#28736.
Change-Id: I47cab321c87de0a4c482f5466b819b2cc8993fd1
Reviewed-on: https://go-review.googlesource.com/c/149077
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The spec currently provides a syntactic rule for receiver base types,
and a strict reading of those rules prohibits the use of type aliases
referring to pointer types as receiver types.
This strict interpretation breaks an assumed rule for aliases, which
is that a type literal can always be replaced by an alias denoting
that literal.
Furthermore, cmd/compile always accepted this new formulation of the
receiver type rules and so this change will simply validate what has
been implemented all along.
Fixes#27995.
Change-Id: I032289c926a4f070d6f7795431d86635fe64d907
Reviewed-on: https://go-review.googlesource.com/c/142757
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The spec used the term "conversion" somewhat indiscriminately for
explicit conversions that appear literally in the source, and implicit
conversions that are implied by the context of an expression.
Be clearer about it by defining the terms.
Also, state that integer to string conversions of the form string(x)
are never implicit. This clarifies situations where implicit conversions
might require an integer to change to a string (but don't and never have
done so). See line 3948.
Fixes#26313.
Change-Id: I8939466df6b5950933ae7c987662ef9f88827fda
Reviewed-on: https://go-review.googlesource.com/c/139099
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#27802.
Change-Id: I7ea9f7279300a55b0cb851893edc591a6f84e324
Reviewed-on: https://go-review.googlesource.com/136758
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 4b06d9d727.
Reason for revert: It's a reference to a legendary article
from the Journal of Irreproducible Results.
Updates golang/go#24451
Change-Id: I0288177f4e286bd6ace5774f2e5e0acb02370305
Reviewed-on: https://go-review.googlesource.com/101495
Reviewed-by: Andrew Bonventre <andybons@golang.org>
The fourth example for map indexing states you have a map of type [K]V
and attempts to read in a variable of type T. Further, the example
is meant to showcase the boolean return variable saying whether the
map contained a key, but overrides to type T. This will not compile.
Changed last updated date to February 18
Fixes: #23895
Change-Id: I63c52adbcd989afd4855e329e6c727f4c01f7881
Reviewed-on: https://go-review.googlesource.com/94906
Reviewed-by: Robert Griesemer <gri@golang.org>
The EBNF production
Function = Signature FunctionBody .
was used in FunctionDecl, MethodDecl, and FunctionLit, but only
for the latter it shortened the syntax slightly.
This change "inlines" Function which simplifies FunctionDecl and
MethodDecl and gets rid of the Function production.
This has no impact on the specified language. Also, the Function
production is never referred to by the prose, so it's safe to
remove it from the spec.
Finally, neither go/ast nor go/parser have a representation of
this production via a corresponding node or parse function, so
no possibly valuable documentation is lost, either.
Change-Id: Ia2875d31c6ec2d2079081ef481e50bad4f43c694
Reviewed-on: https://go-review.googlesource.com/91515
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
When we introduced the notion of alias type declarations, we renamed
"named type" to "defined type" to avoid confusion with types denoted
by aliases and thus are also types with names, or "named types".
Some of the old uses of "named types" remained; this change removes
them.
Now the spec consistently uses the terms:
- "defined type" for a type declared via a type definition
- "type name" for any name denoting an (alias or defined) type
- "alias" for a type name declared in an alias declaration
New prose is encouraged to avoid the term "named type" to counter-
act further confusion.
Fixes#23474.
Change-Id: I5fb59f1208baf958da79cf51ed3eb1411cd18e03
Reviewed-on: https://go-review.googlesource.com/89115
Reviewed-by: Rob Pike <r@golang.org>
Fixes#23443.
Change-Id: If60c39b582ee5308e9fa902f93c1b6ae7890346c
Reviewed-on: https://go-review.googlesource.com/87975
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Every few months we get a new error report claiming that there
is a typo in the spec related to this specific example. Clearly,
the fact that two types with the same identifier are identical
seems exceedingly obvious to readers; thus the example seems not
worth the trouble. Removing it.
For #9226.
For #22202.
For #22495.
For #23096.
For #23409.
There may be more.
Change-Id: I003ba79dc460ffb028a4ecb5f29efd60f2551912
Reviewed-on: https://go-review.googlesource.com/87417
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The spec refers to a map's key and element types; thus the respective
values are "keys" and "elements". Also, a map value is the value of
the entire map.
Similar fix for channels, where appropriate.
Fixes#23254.
Change-Id: I6f03ea6d86586c7b0b3e84f0c2e9446b8109fa53
Reviewed-on: https://go-review.googlesource.com/85999
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
A method expression is of the form T.m where T is a type and m
is a method of that type. The spec restricted T essentially to
a type name. Both cmd/compile and go/types accepted any type
syntactically, and a method expression was really just a form
of a selector expression x.f where x denotes a type.
This CL removes the spec syntax restriction from MethodExpr
to match the actual implementation. It also moves MethodExpr
from Operand to PrimaryExpr, because that's what it is.
It still keeps the separate notion of MethodExpr even though
it looks just like a selector expresion, since a MethodExpr
must start with a type rather than a value, and the spec's
syntax expresses this bit of semantics via distinct productions
(e.g., conversions look like calls but also must start with
a type).
Fixes#9060.
Change-Id: Idd84655b5b4f85d7ee53ebf749f73f0414a05f4a
Reviewed-on: https://go-review.googlesource.com/73233
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
https://golang.org/cl/71750 specifies iota values as indices,
thus making them independent from nested constant declarations.
This CL removes some of the comments in the examples that were
still referring to the old notion of iotas being incremented
and reset.
As an aside, please note that the spec still permits the use
of iota in a nested function (like before). Specifically, the
following cases are permitted by the spec (as before):
1) const _ = len([iota]int{})
2) const _ = unsafe.Sizeof(func(){ _ = iota })
For #15550.
Change-Id: I9e5fec75daf7b628b1e08d970512397e9c348923
Reviewed-on: https://go-review.googlesource.com/71912
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Issue #15550 is clearly an esoteric case but the spec was silent
about it and we had diverging implementations. By making `iota`
and index that is relative to the respective constant declaration,
nested const declarations won't affect outer values of `iota`.
cmd/compile and go/types already follow this semantics.
Fixes#15550.
Change-Id: If138189e3ea4373f8ba50ac6fb1d219b481f8698
Reviewed-on: https://go-review.googlesource.com/71750
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#22258.
Change-Id: I43e68f1cf3163e1a041ebff2734ff2cb7943f695
Reviewed-on: https://go-review.googlesource.com/71431
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Nowhere in the spec did we mention the import path for package
unsafe. Now we do.
Fixes#22308.
Change-Id: Ifd42c873188e898c597cdee4284e7a9d234a9282
Reviewed-on: https://go-review.googlesource.com/71373
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When we introduced the distinction between "defined" and "alias" types
we retained the notion of a "named" type (any type with a name). The
predeclared types (which all have names) simply remained named types.
This CL clarifies the spec by stating excplicitly which predeclared
types are defined types (or at least "act" like defined types), and
which ones are alias types.
Fixes#21785.
Change-Id: Ia8ae133509eb5d738e6757b3442c9992355e3535
Reviewed-on: https://go-review.googlesource.com/64591
Reviewed-by: Russ Cox <rsc@golang.org>
The spec is not conclusive about whether a non-constant shift of
certain untyped constant left operands is valid when the shift
expression appears as an index in an index or slice expression,
or as a size in a `make` function call.
Despite identical spec rules in all these cases, cmd/compile accepts
make([]byte, 1.0 << s)
but pronounces an error for
a[1.0 << s]
(go/types accepts both).
This change clarifies the spec by explicitly stating that an
untyped constant left operand in a non-constant shift (1.0 in
the above examples) will be given type `int` in these contexts.
A separate issue #21693 addresses the cmd/compile bug.
Fixes#14844.
Change-Id: I4b52125e487a607fae377fcbed55463cdce9836c
Reviewed-on: https://go-review.googlesource.com/60230
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The last sentence in the section on slice expressions could be read
as if it might apply to strings. Changed the sentence a bit to
emphasize its applicability to slices only. See also the issue for
more background.
Fixes#19220.
Change-Id: I8551f34230e4ed93f951e7b871cc81f54a5874a9
Reviewed-on: https://go-review.googlesource.com/59890
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Throughout the spec we use the notion of a constant x being
representable by a value of type T. While intuitively clear,
at least for floating-point and complex constants types, the
concept was not well-defined. In the section on Conversions
there was an extra rule for floating-point types only and it
missed the case of floating-point values overflowing to an
infinity after rounding.
Since the concept is important to Go, and a compiler most
certainly will have a function to test "representability",
it seems warranted to define the term explicitly in the spec.
This change introduces a new entry "Representability" under
the section on "Properties of types and values", and defines
the term explicitly, together with examples.
The phrase used is "representable by" rather than "representable as"
because the former use is prevalent in the spec.
Additionally, it clarifies that a floating-point constant
that overflows to an infinity after rounding is never
representable by a value of a floating-point type, even though
infinities are valid values of IEEE floating point types.
This is required because there are not infinite value constants
in the language (like there is also no -0.0) and representability
also matters for constant conversions. This is not a language
change, and type-checkers have been following this rule before.
The change also introduces links throughout the spec to the new
section as appropriate and removes duplicate text and examples
elsewhere (Constants and Conversions sections), leading to
simplifications in the relevant paragraphs.
Fixes#15389.
Change-Id: I8be0e071552df0f18998ef4c5ef521f64ffe8c44
Reviewed-on: https://go-review.googlesource.com/57530
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The enumeration of numeric types missed the complex types.
Clarify by removing the explicit enumeration and referring
to numeric types instead.
Fixes#21579.
Change-Id: If36c2421f8501eeec82a07f442ac2e16a35927ba
Reviewed-on: https://go-review.googlesource.com/58491
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The old wording seemed to imply that nil is a kind of type.
Slightly reworded for clarity.
Fixes#21580.
Change-Id: I29898bf0125a10cb8dbb5c7e63ec5399ebc590ca
Reviewed-on: https://go-review.googlesource.com/58490
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
The old comment for the example
type PtrMutex *Mutex
talked about the method set of the base type of PtrMutex.
It's more direct and clearer to talk about the underlying
type of PtrMutex for this specific example.
Also removed link inside pre-formatted region of text.
Fixes#20900.
Change-Id: Ie37340e53670e34ebe13e780ba8ccb1bba67795c
Reviewed-on: https://go-review.googlesource.com/55070
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For non-constant shifts with an untyped constant shift count, the
spec only said that it must "be converted to unsigned integer type".
go/types accepts any (arbitrarily large) integer value. Both cmd/compile
and gccgo require that the shift count be representable as a uint value
in that case (if the shift count is typed, it may be any unsigned integer
type).
This change adjusts the spec to state what the compilers have been doing
all along. The new wording matches similar rules elsewhere (e.g., for
untyped array and slice indices). Also, while technically this is a
restriction (we could permit arbitrarily large shift counts), in practice
this is irrelevant.
Fixes#14822.
Change-Id: Ia75834c67483cf761c10025c8df758f225ef67c2
Reviewed-on: https://go-review.googlesource.com/45072
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A pointer type of underlying type unsafe.Pointer can be used in
unsafe conversions. Document unfortunate status quo.
Fixes#19306.
Change-Id: I28172508a200561f8df366bbf2c2807ef3b48c97
Reviewed-on: https://go-review.googlesource.com/42132
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Added a paragraph and examples explaining when an implementation
may use fused floating-point operations (such as FMA) and how to
prevent operation fusion.
For #17895.
Change-Id: I64c9559fc1097e597525caca420cfa7032d67014
Reviewed-on: https://go-review.googlesource.com/40391
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The section on map literals mentions constant map keys but doesn't say
what happens for equal non-constant map keys - that is covered in the
section on evaluation order. Added respective link for clarity.
Fixes#19689.
Change-Id: If9a5368ba02e8250d4bb0a1d60d0de26a1f37bbb
Reviewed-on: https://go-review.googlesource.com/38598
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The (original) section on "Operators and Delimiters" introduced
superfluous terminology ("delimiter", "special token") which
didn't matter and was used inconsistently.
Removed any mention of "delimiter" or "special token" and now
simply group the special character tokens into "operators"
(clearly defined via links), and "punctuation" (everything else).
Fixes#19450.
Change-Id: Ife31b24b95167ace096f93ed180b7eae41c66808
Reviewed-on: https://go-review.googlesource.com/38073
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
To avoid confusion caused by the term "named type" (which now just
means a type with a name, but formerly meant a type declared with
a non-alias type declaration), a type declaration now comes in two
forms: alias declarations and type definitions. Both declare a type
name, but type definitions also define new types.
Replace the use of "named type" with "defined type" elsewhere in
the spec.
For #18130.
Change-Id: I49f5ddacefce90354eb65ee5fbf10ba737221995
Reviewed-on: https://go-review.googlesource.com/36213
Reviewed-by: Rob Pike <r@golang.org>
First steps towards defining type aliases in the spec.
This is a nomenclature clarification, not a language change.
The spec used all three terms 'embedded type', 'anonymous field',
and 'embedded field'. Users where using the terms inconsistently.
The notion of an 'anonymous' field was always misleading since they
always had a de-facto name. With type aliases that name becomes even
more important because we may have different names for the same type.
Use the term 'embedded field' consistently and remove competing
terminology.
For #18130.
Change-Id: I2083bbc85788cab0b2e2cb1ff58b2f979491f001
Reviewed-on: https://go-review.googlesource.com/35108
Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This matches what we already do for switch statements and makes
this large section more visibly organized. No other changes besides
introducing the titles.
Fixes#4486.
Change-Id: I73f274e4fdd27c6cfeaed79090b4553e57a9c479
Reviewed-on: https://go-review.googlesource.com/33410
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- organize examples better
- add an example illustrating behavior if element type is a named pointer type
- both compilers and go/types (per https://go-review.googlesource.com/33358)
follow this now
See the issue for detailed discussion.
Fixes#17954.
Change-Id: I8d90507ff2347d9493813f75b73233819880d2b4
Reviewed-on: https://go-review.googlesource.com/33361
Reviewed-by: Rob Pike <r@golang.org>
A 16bit binary exponent permits a constant range covering roughly the range
from 7e-9865 to 7e9863 which is more than enough for any practical and
hypothetical constant arithmetic.
Furthermore, until recently cmd/compile could not handle very large exponents
correctly anyway; i.e., the chance that any real programs (but for tests that
explore corner cases) are affected are close to zero.
Finally, restricting the minimum supported range significantly reduces the
implementation complexity in an area that hardly matters in reality for new
or alternative spec-compliant implementations that don't or cannot rely on
pre-existing arbitratry precision arithmetic packages that support a 32bit
exponent range.
This is technically a language change but for the reasons mentioned above
this is unlikely to affect any real programs, and certainly not programs
compiled with the gc or gccgo compilers as they currently support up to
32bit exponents.
Fixes#13572.
Change-Id: I970f919c57fc82c0175844364cf48ea335f17d39
Reviewed-on: https://go-review.googlesource.com/17711
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This simply documents the status quo accepted by cmd/compile, gccgo,
and go/types. The new language matches the language used for indices
of index expressions for arrays and slices.
Fixes#16679.
Change-Id: I65447889fbda9d222f2a9e6c10334d1b38c555f0
Reviewed-on: https://go-review.googlesource.com/30474
Reviewed-by: Rob Pike <r@golang.org>
This is a backwards-compatible language change.
Per the proposal (#16085), the rules for conversions are relaxed
such that struct tags in any of the structs involved in the conversion
are ignored (recursively).
Because this is loosening the existing rules, code that compiled so
far will continue to compile.
For #16085.
Fixes#6858.
Change-Id: I0feef651582db5f23046a2331fc3f179ae577c45
Reviewed-on: https://go-review.googlesource.com/24190
Reviewed-by: Russ Cox <rsc@golang.org>
See the issue below for details.
Fixes#16794.
Change-Id: I7e338089fd80ddcb634fa80bfc658dee2772361c
Reviewed-on: https://go-review.googlesource.com/27356
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The enumerations didn't include the syntactic form where the lhs is
full variable declaration with type specification, as in:
var x, ok T = ...
Fixes#15782.
Change-Id: I0f7bafc37dc9dcf62cdb0894a0d157074ccd4b3e
Reviewed-on: https://go-review.googlesource.com/27670
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The changes match the existing compilers, and assume an adjusted
spec (per issue #16794).
Fixes#15686.
Change-Id: I72677ce75888c41a8f3c2963117a2f2d5501c42b
Reviewed-on: https://go-review.googlesource.com/27290
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Both compilers and also go/types don't permit duplicate types in
type switches; i.e., this spec change is documenting a status quo
that has existed for some time.
Furthermore, duplicate nils are not accepted by gccgo or go/types;
and more recently started causing a compiler error in gc. Permitting
them is inconsistent with the existing status quo.
Rather than making it an implementation restriction (as we have for
expression switches), this is a hard requirement since it was enforced
from the beginning (except for duplicate nils); it is also a well
specified requirement that does not pose a significant burden for
an implementation.
Fixes#15896.
Change-Id: If12db5bafa87598b323ea84418cb05421e657dd8
Reviewed-on: https://go-review.googlesource.com/23584
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Note that the spec already makes that point with a comment in the very first
example for struct field tags. This change is simply stating this explicitly
in the actual spec prose.
- gccgo and go/types already follow this rule
- the current reflect package API doesn't distinguish between absent tags
and empty tags (i.e., there is no discoverable difference)
Fixes#15412.
Change-Id: I92f9c283064137b4c8651630cee0343720717a02
Reviewed-on: https://go-review.googlesource.com/22391
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Per a suggestion from mdempsky.
Both gc and gccgo consider a statement list as terminating if the
last _non_empty_ statement is terminating; i.e., trailing semis are
ok. Only gotype followed the current stricter rule in the spec.
This change adjusts the spec to match gc and gccgo behavior. In
support of this change, the spec has a matching rule for fallthrough,
which in valid positions may be followed by trailing semis as well.
For details and examples, see the issue below.
Fixes#14422.
Change-Id: Ie17c282e216fc40ecb54623445c17be111e17ade
Reviewed-on: https://go-review.googlesource.com/19981
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The () parentheses grouped wrongly. Removed them completely in
favor of separate 2- and 3-index slice alternatives which is
clearer.
Fixes#14477.
Change-Id: I0b7521ac912130d9ea8740b8793b3b88e2609418
Reviewed-on: https://go-review.googlesource.com/19853
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Slightly rephrased sentence to emphasize the contents of the
Unicode categories w/o repeating the full category name each
time.
Fixes#13414.
Change-Id: Icd32ff1547fa81e866c5937a631c3344bb6087c6
Reviewed-on: https://go-review.googlesource.com/18265
Reviewed-by: Rob Pike <r@golang.org>
The proper term is "untyped boolean".
Change-Id: Id871164190a03c64a8a8987b1ad5d8653a21d96e
Reviewed-on: https://go-review.googlesource.com/16135
Reviewed-by: Robert Griesemer <gri@golang.org>
The spec defines precise numeric constants which do not overflow.
Consequently, +/-Inf and NaN values were excluded. The case was not
clear for -0.0 but they are mostly of interest to determine the sign
of infinities which don't exist.
That said, the conversion rules explicitly say that T(x) (for a numeric
x and floating-point type T) is the value after rounding per IEEE-754.
The result is constant if x is constant. Rounding per IEEE-754 can
produce a -0.0 which we cannot represent as a constant.
Thus, the spec is inconsistent. Attempt to fix the inconsistency by
adjusting the rounding rule rather than letting -0.0 into the language.
For more details, see the issue below.
Open to discussion.
Fixes#12576.
Change-Id: Ibe3c676372ab16d9229f1f9daaf316f761e074ee
Reviewed-on: https://go-review.googlesource.com/14727
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The prose discussing composite literals referred to the composite
literal type with 'LiteralType', denoting the literal type's EBNF
production explicitly. Changed 'LiteralType' to 'literal type' to
remove the literal (no pun intended) connection and instead mean
the underlying type. Seems a simpler and more readable change
than referring to the underlying type everywhere explicitly.
Fixes#12717.
Change-Id: I225df95f9ece2664b19068525ea8bda5ca05a44a
Reviewed-on: https://go-review.googlesource.com/14851
Reviewed-by: Rob Pike <r@golang.org>
First step towards cleaning up the operator section - no language
changes. Specifically:
- Grouped arithmetic operations by types (integer, floating-point,
string), with corresponding h4 headings.
- Changed Operator precedence title from h3 to h4.
- Moved Integer Overflow section after integer operations and changed
its title from h3 to h4.
This puts things that belong together closer. No heading id's were
lost (in case of references from outside the spec).
Change-Id: I6b349ba8d86a6ae29b596beb297cc45c81e69399
Reviewed-on: https://go-review.googlesource.com/13143
Reviewed-by: Rob Pike <r@golang.org>
