Invert "useDeepCompletions" config flag to "disableDeepCompletion" and
separate out "disableFuzzyMatching" which reverts to the previous
prefix matching behavior.
I separated fuzzy matching tests out to a separate file so they aren't
entangled with deep completion tests. In coming up with representative
test cases I found a couple issues which I fixed:
- We were treating a fuzzy matcher score of 0 as no match, but the
matcher returns 0 for candidates that match but have no bonuses. I
changed the matcher interface so that a score of 0 counts as a
match. For example, this was preventing a pattern of "o" from
matching "foo".
- When we lower a candidate's score based on its depth, we were
subtracting a static multiplier which could result in the score
going negative. A negative score messes up future score weighting
because multiplying it by a value in the range [0, 1) makes it
bigger instead of smaller. Fix by scaling a candidate's score based
on its depth rather than subtracting a constant factor.
Updates golang/go#32754
Change-Id: Ie6f9111f1696b0d067d08f7eed7b0a338ad9cd67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Prepare rename gets the range of the identifier to rename. Returns an
error when there is no identifier to rename.
Change-Id: I5e5865bc9ff97e6a95ac4f0c48edddcfd0f9ed67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191170
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now we register for and handle didChangeWatchedFiles "change"
events. We don't handle "create" or "delete" yet.
When a file changes on disk, there are two basic cases. If the editor
has the file open, we want to ignore the change since we need to
respect the file contents in the editor. If the file isn't open in the
editor then we need to re-type check (and re-diagnose) any packages it
belongs to.
We will need special handling of go.mod changes, but start with
just *.go files for now.
I'm putting the new behavior behind an initialization flag while it is
under development.
Updates golang/go#31553
Change-Id: I81a767ebe12f5f82657752dcdfb069c5820cbaa0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190857
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unimported packages may be suggested as completion items. Since these
are not yet imported, they should be ranked lower than other candidates.
They also require an additional import statement to be valid, which is
provided as an AdditionalTextEdit.
Adding this import does not use astutil.AddNamedImport, to avoid
editing the current ast and work even if there are errors. Additionally,
it can be hard to determine what changes need to be made to the source
document from the ast, as astutil.AddNamedImport includes a merging
pass. Instead, the completion item simply adds another import
declaration.
Change-Id: Icbde226d843bd49ee3713cafcbd5299d51530695
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190338
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change keys the supported code actions map by file kind, so that we
can extend it more easily for go.mod files.
Change-Id: Ic28f91bd517700cf070281b1c4d4ded14a702790
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189039
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Set the server state to initialized so that dynamic configuration
requests will be sent to the client.
Rename the mutex that guards state. The state field was previously named
initialized, so it only makes sense to similarly rename the mutex that
guards the state field.
Always unlock stateMu before calling other functions so that callees
that need to check state can acquire the lock.
Change-Id: Ia5592ca1dedfc6f004ae6b61548890624ae98d59
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188097
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also add enough support that using it from within the context of the lsp will
report back to the original client.
Change-Id: I081f157c289642454e9f0476747b2131dcd4e16c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185996
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds documentation to the completion items. This normally
should be done in completionItem/resolve, since it takes more time to
compute documentation. However, I am not sure if that latency incurred
by pre-computing documentation is actually significantly more than the
latency incurred by an extra call to 'completionItem/resolve'. This
needs to be investigated, so we begin by just precomputing all of the
documentation for each item.
Updates golang/go#29151
Change-Id: I148664d271cf3f1d089c1a871901e3ee404ffbe8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184721
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Instead of defaulting to a one sentence synopsis for documentation on
hover, allow the user to configure the amount of documentation they want
to see. Right now, the options are none, some (using go/doc.Synopsis),
or all. We should add a 4th, single-line, mode, which will allow clients
like vim-go to stop stripping off documentation on hover.
Updates golang/go#32561
Change-Id: I529242da84b794636984d5ef2918b7252886f0ef
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184797
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change refactors code actions to handle the Context.Only parameter,
which indicates which code actions a language server should execute.
Change-Id: Iddfccbbeba3a53fde2aa8df844434f2ab9d01666
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184158
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Deep completion refers to searching through an object's fields and
methods for more completion candidates. For example:
func wantsInt(int) { }
var s struct { i int }
wantsInt(<>)
Will now give a candidate for "s.i" since its type matches the
expected type.
We limit to three deep completion results. In some cases there are
many useless deep completion matches. Showing too many options defeats
the purpose of "smart" completions. We also lower a completion item's
score according to its depth so that we favor shallower options. For
now we do not continue searching past function calls to limit our
search scope. In other words, we are not able to suggest results with
any chained fields/methods after the first method call.
Deep completions are behind the "useDeepCompletions" LSP config flag
for now.
Change-Id: I1b888c82e5c4b882f9718177ce07811e2bccbf22
GitHub-Last-Rev: 26522363730036e0b382a7bcd10aa1ed825f6866
GitHub-Pull-Request: golang/tools#100
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177622
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change provides support to rename identifiers within a single
package.
The renaming is performed by finding all references to an identifier,
and then creating text edits to replace the existing text with the
new identifier.
Editing an import spec is not supported.
Fixes#27571
Change-Id: I0881b65a1b3c72d7c53d7d6ab1ea386160dc00fb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182585
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds an "experimentalDisabledAnalyses" configuration
to the "gopls" configuration. A user can specify a list of excluded
analyses by analyzer name.
Fixesgolang/go#31717
Change-Id: I4b162fcd61ecfcef5c926bd0e96f182748a7721d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179920
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change implements the find all references feature by finding all of
the uses and definitions of the identifier within the current package.
Testing for references is done using "refs" in the testdata files and
marking the references in the package.
Change-Id: Ieb44b68608e940df5f65c3052eb9ec974f6fae6c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181122
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
These are the latest changes to vscode-languageserver-node brought to Go.
Change-Id: I88d0b384356964c358cb2c51ea3b79cb6b51b434
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178357
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is primarily to separate the levels because they have different cache
lifetimes and sharability.
This will allow us to share results between views and even between servers.
Change-Id: I280ca19d17a6ea8a15e48637d4445e2b6cf04769
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177518
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change removes the explicit configuration for improved
documentation on hover. We use a comment's synopsis rather than the full
comment.
However, we also add a "noDocsOnHover" setting that is used by the cmd
tests. Ultimately, no one should use this setting and we should remove
it. We leave it temporarily because the cmd tests still need work.
Change-Id: I5488eca96a729ed7edad8f59b95af163903740d6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174378
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The cache now exposes only one symbol, NewView
This is preparing the cache for a re-write
Change-Id: I411c2cd7a7edc2e7c774218c6786f9fd4fcc53cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176924
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change stops diagnostics from running in files making up the "fake"
builtin package.
Fixesgolang/go#31962
Change-Id: Ic54e1587e3ad54f0c1f5e82f1a6f3522b4c6bee9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177218
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This also required us to change the way we map files to a view, as it may change
over time.
Fixesgolang/go#31635
Change-Id: Ic82467a1185717081487389f4c25ad69df1af290
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175477
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
RangeFormatting was broken with the introduction of the diff library,
but not noticed until golang/go#31150. Temporarily disable this behavior
until we fix it.
Change-Id: Ie3e50a763e0c0e8672ad20c3a2e37d901325d356
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175938
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The generated code adds some server methods that are unsupported, but were
prviously unimplemented, and makes small adjusments to some parameter types.
Change-Id: I3dd32cafa3e457193f0771e0f8e150c88b381c82
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173420
Run-TryBot: Peter Weinberger <pjw@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change associates an ast.Node for some object declarations.
In this case, we only handle type declarations, but future changes will
support other objects as well. This is the first step in adding
documentation on hover.
Updates golang/go#29151
Change-Id: I39ddccf4130ee3b106725286375cd74bc51bcd38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172661
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change separates the different behaviors of server.go by the
categories defined in the spec. This allows us to differentiate more
easily between the language features and the text synchronization code.
I also renamed the "Symbols" function to "Symbol", which fits with the
specification
(https://microsoft.github.io/language-server-protocol/specification#workspace_symbol),
and makes clearer the distinction between DocumentSymbols and Symbol.
Change-Id: I926b8a772c478f6ae426352fb12dc4403f0e736a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172637
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
- show signature for function calls whose function expression is not
an object (e.g. the second call in foo()()). since the function name
is not available, we use the generic "func"
- only provide signature help when the position is on or within the
call expression parens. this is consistent with the one other lsp
server i tried (java). this improves the gopls experience in emacs
where lsp-mode is constantly calling "hover" and
"signatureHelp" ("hover" should be preferred unless you are inside
the function params list)
- use the entire signature type string as the label since that includes
the return values, which are useful to see
- don't qualify the function name with its package. it looks funny to
see "bytes.Cap()" as the help when you are in a call
to (*bytes.Buffer).Cap(). it could be useful to include invocant
type info, but leave it out for now since signature help is meant to
focus on the function parameters.
- don't turn variadic args "foo ...int" into "foo []int" for the
parameter information (i.e. maintain it as "foo ...int")
- when determining active parameter, count the space before a
parameter name as being part of that parameter (e.g. the space
before "b" in "func(a int, b int)")
- handle variadic params when determining the active param (i.e.
highlight "foo(a int, *b ...string*)" on signature help for final
param in `foo(123, "a", "b", "c")`
- don't generate an extra space in formatParams() for unnamed
arguments
I also tweaked the signatureHelp server log message to include the
error message itself, and populated the server's logger in lsp_test.go
to aid in development.
Fixesgolang/go#31448
Change-Id: Iefe0e1e3c531d17197c0fa997b949174475a276c
GitHub-Last-Rev: 5c0b8ebd87a8c05d5d8f519ea096f94e89c77e2c
GitHub-Pull-Request: golang/tools#82
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172439
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change makes sure that we never return error messages for
completions and signature help requests - just empty results.
Change-Id: I00d75cd116daab63beb07f2344e47aac01bb64ee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170958
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
go.ts, the program that generates Go types for the LSP protocol, now
handles Typescript type merging for ClientCapabilites, so fields are no
longer missing. Also, to silence go lint and go vet there are changes
in the comments generated in tsprotocol.go. All the *structs were changed
to structs in ClientCapabilities as it was absurdly complex to write literals
of the type. Finally, several otherwise unused types are no longer
generated.
Change-Id: If414a32bc4d733adb2cf8befda9d8a0703c568a6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/171026
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change makes codeActions look at the diagnostics provided before
responding. Specifically, before running "source.organizeImports", we
check if there is a diagnostic relating to imports.
Change-Id: I5268d5e8f144c4f2e085b2a861d0abfb7614323b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170997
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change allows us to determine if we should complete with
placeholders in the function signature or not.
We currently complete all functions with parameters with a set of
parentheses with the cursor between them. Now, we support the option to
tab through the parameters.
Change-Id: I01d9d7ffdc76eb2f8e009ab9c8aa46d71c24c358
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170877
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This uses the workspace folders to build multiple views, and then tries to pick
the right view to send each incomming request to.
Change-Id: I0cc896dbbc67eb0a88225ddeca6c518f4258bbba
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170179
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a cache of undelivered diagnostics on the server-side.
If we fail to send a diagnostic once, we will retry the next time that
the server sends diagnostics.
Change-Id: I161dfad8ea1d2cfdcee933baed2d6872dc03b0c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167737
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also use it for errors that were otherwise silently dropped
This makes it much easier to debug problems.
Also added command line control over whether the rpc trace messages are printed, which allows you to read the
log, otherwise the file edit messages swamp the log.
Change-Id: I7b70fd18034a87b2964e6d6d5f6f33dcaf7d8ea8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170178
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now the jsonrpc2 library allows you to call outgoing methods within a handler
we can clean up some stuff and also have it work correctly in more cases.
Change-Id: I8633069816d92f7cc16842431775efb1a98a506a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170008
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes the basic API of a jsonrpc2 connection to run the
read loop as a method rather than in a go routine launched in
the NewConn. This allows the handler to be created and bound
between construction and the read loop starting, which fixes
the race.
Fixesgolang/go#30091
Change-Id: I8201175affe431819cf473e5194d70c019f58425
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170003
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This connects up the configuration message, and uses it to allow the client to set the environment
in the config passed to packages.Load
Change-Id: I75e03c01c74e9b11c8b4c47b9cbdd0574cddf778
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169704
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first step of fixing gopls on Windows.
Change-Id: I20cea63051f448cba86996edaf7a8347b0d20bd1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169444
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
