Retrying CL 222782, with a fix that will hopefully stop the random crashing.
The issue with the previous CL is that it does pointer arithmetic
in a way that may briefly generate an out-of-bounds pointer. If an
interrupt happens to occur in that state, the referenced object may
be collected incorrectly.
Suppose there was code that did s[x+c]. The previous CL had a rule
to the effect of ptr + (x + c) -> c + (ptr + x). But ptr+x is not
guaranteed to point to the same object as ptr. In contrast,
ptr+(x+c) is guaranteed to point to the same object as ptr, because
we would have already checked that x+c is in bounds.
For example, strconv.trim used to have this code:
MOVZX -0x1(BX)(DX*1), BP
CMPL $0x30, AL
After CL 222782, it had this code:
LEAL 0(BX)(DX*1), BP
CMPB $0x30, -0x1(BP)
An interrupt between those last two instructions could see BP pointing
outside the backing store of the slice involved.
It's really hard to actually demonstrate a bug. First, you need to
have an interrupt occur at exactly the right time. Then, there must
be no other pointers to the object in question. Since the interrupted
frame will be scanned conservatively, there can't even be a dead
pointer in another register or on the stack. (In the example above,
a bug can't happen because BX still holds the original pointer.)
Then, the object in question needs to be collected (or at least
scanned?) before the interrupted code continues.
This CL needs to handle load combining somewhat differently than CL 222782
because of the new restriction on arithmetic. That's the only real
difference (other than removing the bad rules) from that old CL.
This bug is also present in the amd64 rewrite rules, and we haven't
seen any crashing as a result. I will fix up that code similarly to
this one in a separate CL.
Update #37881
Change-Id: I5f0d584d9bef4696bfe89a61ef0a27c8d507329f
Reviewed-on: https://go-review.googlesource.com/c/go/+/225798
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
gentraceback generates PCs which are usually following the CALL
instruction. For those that aren't, it fixes up the PCs so that
functions processing the output can unconditionally decrement the PC.
runtime_expandInlineFrames does this unconditional decrement when
looking up the function. However, the fake stack frame generated for
overflow records fails to meet the contract, and decrementing the PC
results in a PC in the previous function. If that function contains
inlined call, runtime_expandInlineFrames will not short-circuit and will
panic trying to look up a PC that doesn't exist.
Note that the added test does not fail at HEAD. It will only fail (with
a panic) if the function preceeding lostProfileEvent contains inlined
function calls. At the moment (on linux/amd64), that is
runtime/pprof.addMaxRSS, which does not.
Fixes#38096
Change-Id: Iad0819f23c566011c920fd9a5b1254719228da0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/225661
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These hard-coded timeouts make the tests flaky on slow builders (such
as solaris-amd64-oraclerel), and make test failures harder to diagnose
anyway (by replacing dumps of the stuck goroutine stacks with failure
messages that do not describe the stuck goroutines). Eliminate them
and simplify the tests.
Fixes#37327Fixes#38112
Change-Id: Id40febe349d134ef53c702e36199bfbf2b6468ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/225977
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There might be some concurrent (maybe not concurrent, just sequential but in a short time window) and duplicate calls to `netpollBreak`, trying to wake up a net-poller. If one has called `netpollBreak` and that waking event hasn't been received by epollwait/kevent/..., then the subsequent calls of `netpollBreak` ought to be ignored or in other words, these calls should be converged into one.
Benchmarks go1.13.5 darwin/amd64:
benchmark-func time/op (old) time/op (new) delta
BenchmarkNetpollBreak-4 29668ns ±1% 3131ns ±2% -89.45%
mem/B (old) mem/B (new) delta
154B ±13% 0B ±0% -100%
Change-Id: I3cf757a5d6edc5a99adad7aea3baee4b7f2a8f5c
GitHub-Last-Rev: 15bcfbab8a
GitHub-Pull-Request: golang/go#36294
Reviewed-on: https://go-review.googlesource.com/c/go/+/212737
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Installing to GOROOT makes tests non-parallelizable, since each test
depends on the installed contents of GOROOT already being up-to-date
and may reasonably assume that those contents do not change over the
course of the test.
Fixes#37573
Updates #30316
Change-Id: I2afe95ad11347bee3bb7c2d77a657db6d691cf05
Reviewed-on: https://go-review.googlesource.com/c/go/+/225897
Reviewed-by: Michael Matloob <matloob@golang.org>
https://golang.org/doc/contribute.html#quick_test currently suggests
running 'make.bash' and 'run.bash' separately, but 'run.bash'
potentially uses a 'go' command resolved from the wrong GOROOT,
which in turn sets the wrong GOROOT for further commands.
Updates #32674
Updates #17896
Change-Id: I4925d478d0fc7351c4f6d40830ab17d4d688348d
Reviewed-on: https://go-review.googlesource.com/c/go/+/223741
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
This reverts CL 223257.
Reason for revert: broke TestScript/mod_gonoproxy on the longtest builders.
Change-Id: I8637c52c5a7d5333a37ed1e9998c49786525ecb1
Reviewed-on: https://go-review.googlesource.com/c/go/+/225757
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The plan9-arm builder has a very slow filesystem and frequently times
out on this test. The api check verifies the API for all supported
GOOS/GOARCH/CGO_ENABLED combination anyway, so if we skip it on one
builder (or even most builders) there should be no loss of coverage.
Updates #37951
Change-Id: I86a93df2ec60a6af6d942e3954eef09ce67bb39e
Reviewed-on: https://go-review.googlesource.com/c/go/+/225662
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: If53152ec1c3282c67d4909818b666af58884fb2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/223257
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
EnvForDir does not immediately evoke “append”, and thus may not prompt
the reader to consider the possibility of aliasing bugs (as in
issue #38077). To make this behavior more obvious at the call site, rename
cmd/go/internal/base.EnvForDir to AppendPWD and swap the order of
arguments to a conventional “append” function (similar to those in the
strconv package).
For #38077
Change-Id: I16f09aa0fa8a269d51f0511eb402a44e2759eb94
Reviewed-on: https://go-review.googlesource.com/c/go/+/225578
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Appending to a global slice is only safe if its length is already
equal to its capacity. That property is not guaranteed for slices in
general, and empirically does not hold for this one.
This is a minimal fix to make it easier to backport.
A more robust cleanup of the base.EnvForDir function will be sent in a
subsequent CL.
Fixes#38077
Updates #37940
Change-Id: I731d5bbd0e516642c2cf43e713eeea15402604e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/225577
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Currently, the capping logic for the GC trigger ratio is such that if
gcpercent is low, we may end up setting the trigger ratio far too high,
breaking the promise of SetGCPercent and GOGC has a trade-off knob (we
won't start a GC early enough, and we will use more memory).
This change modifies the capping logic for the trigger ratio by scaling
the minTriggerRatio with gcpercent the same way we scale
maxTriggerRatio.
Fixes#37927.
Change-Id: I2a048c1808fb67186333d3d5a6bee328be2f35da
Reviewed-on: https://go-review.googlesource.com/c/go/+/223937
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This makes all modern public keys in the standard library implement a
common interface (below) that can be used by applications for better
type safety and allows for checking that public (and private keys via
Public()) are equivalent.
interface {
Equal(crypto.PublicKey) bool
}
Equality for ECDSA keys is complicated, we take a strict interpretation
that works for all secure applications (the ones not using the
unfortunate non-constant time CurveParams implementation) and fails
closed otherwise.
Tests in separate files to make them x_tests and avoid an import loop
with crypto/x509.
Re-landing of CL 223754. Dropped the test that was assuming named curves
are not implemented by CurveParams, because it's not true for all
curves, and anyway is not a property we need to test. There is still a
test to check that different curves make keys not Equal.
Fixes#21704Fixes#38035
Reviewed-on: https://go-review.googlesource.com/c/go/+/223754
Reviewed-by: Katie Hockman <katie@golang.org>
Change-Id: I736759b145bfb4f7f8eecd78c324315d5a05385c
Reviewed-on: https://go-review.googlesource.com/c/go/+/225460
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Variable 'procs' used to calculate the threshold of overuse in
TestPhysicalMemoryUtilization should be updated if GOMAXPROCS
gets changed, otherwise the threshold could be a large number,
making the test meaningless.
Change-Id: I876cbf11457529f56bae77af1e35f4538a721f95
Reviewed-on: https://go-review.googlesource.com/c/go/+/210297
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Make the code more consistent with the rest of the file.
Should have caught this in review of CL 225357.
Change-Id: I12824cb436539c31604684e043ebb7587cc92471
Reviewed-on: https://go-review.googlesource.com/c/go/+/225557
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Write the test output to the temporary directory, not the current
directory.
May fix linux-mips64le-mengzhuo builder.
Change-Id: Ibfeb3d2879c11d498abc31df4efe776fc09a6ad6
Reviewed-on: https://go-review.googlesource.com/c/go/+/225440
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Currently if a goroutine is preempted while owning a timer in the
timerModifying state, it could self-deadlock. When the goroutine is
preempted and calls into the scheduler, it could call checkTimers. If
checkTimers encounters the timerModifying timer and calls runtimer on
it, then runtimer will spin, waiting for that timer to leave the
timerModifying state, which it never will.
So far we got lucky that for the most part that there were no preemption
points while timerModifying is happening, however CL 221077 seems to
have introduced one, leading to sporadic self-deadlocks.
This change disables preemption explicitly while a goroutines holds a
timer in timerModifying. Since only checkTimers (and thus runtimer) is
called from the scheduler, this is sufficient to prevent
preemption-based self-deadlocks.
Fixes#38070.
Updates #37894.
Change-Id: Idbfac310889c92773023733ff7e2ff87e9896f0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/225497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This partially undoes the optimizations of CL 177597, but makes up
some of the difference by caching the package list and import metadata
and making the initial calls concurrently, including in TestMain.
That reduces the critical path from two sequential 'go list'
invocations to just one (run many times concurrently), and eliminates
the need for assumptions about the consistency of the 'std' dependency
graph across platforms (and hard-coded special cases for packages that
violate those assumptions).
In the process, this simplifies and fixes TestBenchmark (which has
been silently broken since CL 164623).
This increases 'time go tool dist test api' on my workstation from
0m8.4s / 0m13.8s / 0m1.7s to 0m10.5s / 0m23.1s / 0m5.1s,
compared to 0m12.4s / 0m23.2s / 0m4.7s before CL 177597.
(That is, this change retains about half of the wall-time speedup, but
almost none of the user-time speedup.)
Tested manually using 'go test -race -bench=. cmd/api'.
Fixes#37951
Change-Id: Icd537e035e725e1ee7c41d97da5c6651233b927e
Reviewed-on: https://go-review.googlesource.com/c/go/+/224619
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
On arm64, a function's address is 16 bytes aligned, and
the assembler aligns the size of function symbol to 16 bytes,
so to keep the consistent, this patch changes the function
alignment in the linker to 16 bytes.
Change-Id: I4d1e89a56200453b7b586fe3f4656bada7544214
Reviewed-on: https://go-review.googlesource.com/c/go/+/225397
Reviewed-by: eric fang <eric.fang@arm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Recently, we get requirements of instructions and functions alignment
from the gVisor project. To fit the alignment requirement of interrupt
table, they require an instruction's address to be aligned 128 bytes
and a function's entry address to be aligned 2K bytes. Thus we add
support for PCALIGN directive first. Below is a discussion about this
topic. https://groups.google.com/forum/m/#!topic/golang-dev/RPj90l5x86I
Functions in Go are aligned to 16 bytes on arm64, thus now we only
support 8 and 16 bytes alignment.
This patch adds support for PCALIGN directive. This directive can be
used within Go asm to align instruction by padding NOOP directives.
This patch also adds a test to verify the correnctness of the PCALIGN
directive. The test is contributed by Fannie Zhang <Fannie.Zhang@arm.com>.
Change-Id: I709e6b94847fe9e1824f42f4155355f90c63d523
Reviewed-on: https://go-review.googlesource.com/c/go/+/207117
Reviewed-by: eric fang <eric.fang@arm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The "runindir" tests used "go run", but relied on relative imports
(which are not supported by "go run" in module mode). Instead, such
tests must use fully-qualified imports, which require either a go.mod
file (in module mode) or that the package be in an appropriate
subdirectory of GOPATH/src (in GOPATH mode).
To set up such a directory, we use yet another copy of the same
overlayDir function currently found in the misc subdirectory of this
repository.
Fixes#33912
Updates #30228
Change-Id: If3d7ea2f7942ba496d98aaaf24a90bcdcf4df9f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/225205
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The load and test instructions compare the given value
against zero and will produce a condition code indicating
one of the following scenarios:
0: Result is zero
1: Result is less than zero
2: Result is greater than zero
3: Result is not a number (NaN)
The instruction can be used to simplify floating point comparisons
against zero, which can enable further optimizations.
This CL also reduces the size of .text section of math.test binary by around
0.7 KB (in hexadecimal, from 1358f0 to 135620).
Change-Id: I33cb714f0c6feebac7a1c46dfcc735e7daceff9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/209159
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The s390x assembly implementation was previously only handling this
case correctly for x = -Pi. Update the special case handling for
any y.
Fixes#35446
Change-Id: I355575e9ec8c7ce8bd9db10d74f42a22f39a2f38
Reviewed-on: https://go-review.googlesource.com/c/go/+/223420
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Where possible, fold constants into versions of instructions that take
an immediate. This avoids the need to allocate a register and load the
immediate into it.
Change-Id: If911ca41235e218490679aed2ce5f48bf807a2b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/222639
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
riscv64 now has atomic intrinsics, so re-enable the atomic intrinsic tests.
Fixes#36765
Change-Id: I838f27570a94d7fa5774c43f1ca5f4df2ca104cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/223560
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For #25628
Change-Id: If1dce7ba9310e1418e67b9954c989471b775a28e
Reviewed-on: https://go-review.googlesource.com/c/go/+/225278
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fixes a potential issue with the previous implementation
of PCALIGN on ppc64. Previously PCALIGN was processed inside of
asmout and indicated the padding size by setting the value in
the optab, changing it back after the alignment instructions
were added. Now PCALIGN is processed outside of asmout, and optab
is not changed.
Change-Id: I8b0093a0e2b7e06176af27e05150d04ae2c55d60
Reviewed-on: https://go-review.googlesource.com/c/go/+/225198
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As of the Go 1.11 release we require at least Windows 7, so CancelIoEx
is always available. This lets us simplify the code to not require
dedicated threads to handle I/O requests.
Fixes#37956
Change-Id: If1dc4ac4acb61c43e4f2a9f26f225869050262a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/225060
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
newdefer() actually adds the new defer to the current g's defer chain. That
happens even if we are on the system stack, in which case the g will be the g0
stack. For open-coded defers, we call newdefer() (only during panic processing)
while on the system stack, so the new defer is unintentionally added to the
g0._defer defer list. The code later correctly adds the defer to the user g's
defer list.
The g0._defer list is never used. However, that pointer on the g0._defer list can
keep a defer struct alive that is intended to be garbage-collected (smaller defers
use a defer pool, but larger-sized defer records are just GC'ed). freedefer() does
not zero out pointers when it intends that a defer become garbage-collected. So,
we can have the pointers in a defer that is held alive by g0._defer become invalid
(in particular d.link). This is the cause of the bad pointer bug in this issue
The fix is to change newdefer (only used in two places) to not add the new defer
to the gp._defer list. We just do it after the call with the correct gp pointer.
(As mentioned above, this code was already there after the newdefer in
addOneOpenDeferFrame.) That ensures that defers will be correctly
garbage-collected and eliminate the bad pointer.
This fix definitely fixes the original repro. I added a test and tried hard to
reproduce the bug (based on the original repro code), but awasn't actually able to
cause the bug. However, the test is still an interesting mix of heap-allocated,
stack-allocated, and open-coded defers.
Fixes#37688
Change-Id: I1a481b9d9e9b9ba4e8726ef718a1f4512a2d6faf
Reviewed-on: https://go-review.googlesource.com/c/go/+/224581
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We used to fall back to GetQueuedCompletionStatus if
GetQueuedCompletionStatus was not available, but as of Go 1.11 we
require Windows 7 or later, so GetQueuedCompletionStatusEx is always
available.
Fixes#37957
Change-Id: I7d8d49a92ab7b1f5afdc54a442f696aaf4a5168e
Reviewed-on: https://go-review.googlesource.com/c/go/+/225059
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reduce the length of time that other timer functions can see timerModifying.
In particular avoid system calls.
Fixes#38023
Change-Id: I1b61229c668e6085d9ee6dca9488a90055386c36
Reviewed-on: https://go-review.googlesource.com/c/go/+/224902
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
'go mod download' is equivalent to 'go mod download all'.
Fixes#38031
Change-Id: I7aec7e5a1370a3e248eba6daad9a75ec21f33a83
Reviewed-on: https://go-review.googlesource.com/c/go/+/225201
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit CL 222782.
Reason for revert: Reverting to see if 386 errors go away
Update #37881
Change-Id: I74f287404c52414db1b6ff1649effa4ed9e5cc0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/225218
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The callers expect negative errno values, so negate them when necessary.
No test because there is no reasonable way to make pipe/pipe2 fail.
This was reported on a system on which pipe2 returned ENOSYS.
Fixes#37997
Change-Id: I3ad6cbbc2521cf495f8df6ec991a3f781122b508
Reviewed-on: https://go-review.googlesource.com/c/go/+/224592
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
In Webpack, require("fs") will always be empty. This behavior throws an error: "fs.writeSync is not function". It happens when you did "fmt.Println".
This PR avoids such problem and use polyfill in wasm_exec.js on Webpack.
Change-Id: I55f2c75ce86b7f84d2d92e8e217b5decfbe3c8a1
GitHub-Last-Rev: aecc847e3f
GitHub-Pull-Request: golang/go#35805
Reviewed-on: https://go-review.googlesource.com/c/go/+/208600
Reviewed-by: Richard Musiol <neelance@gmail.com>
List test packages (when list is run with -e) even when the main package
has an error. This is useful to get complete data for go/packages.
Fixes#37971
Change-Id: If6ba0270a319ea5e003d1ed8b1ad39e479e95509
Reviewed-on: https://go-review.googlesource.com/c/go/+/224944
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This reverts CL 223754.
Reason for revert: new tests are failing on all longtest builders.
Change-Id: I2257d106c132f3a02c0af6b20061d4f9a8093c4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/225077
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
