The CMPWUconst op (32-bit unsigned comparison with immediate) takes
an unsigned immediate value. In SSA this should be sign extended to
64-bits to match the Int32 type given in the op and then zero
extended when producing the final assembly. Before this CL we were
zero extending in SSA which caused ssacheck to fail.
While we are here also ensure other 32-bit immediates are sign
extended in SSA.
Passes toolstash -cmp on std on s390x.
Fixes#22611.
Change-Id: I5c061a76a710b10ecb0650c9c42efd9fa1c123cc
Reviewed-on: https://go-review.googlesource.com/76336
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
A couple of the CPU profiling testpoints make calls to helper
functions (cpuHog1, for example) where the computed value is always
thrown away by the caller without being used. A smart compiler back
end (in this case LLVM) can detect this fact and delete the contents
of the called function, which can cause tests to fail. Harden the test
slighly by passing in a value read from a global and insuring that the
caller stores the value back to a global; this prevents any optimizer
mischief.
Change-Id: Icbd6e3e32ff299c68a6397dc1404a52b21eaeaab
Reviewed-on: https://go-review.googlesource.com/76230
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The package source dir is recorded in the archives,
so it must be recorded in the build action hash too.
Fixes#22596.
Change-Id: I1d3c2523181c302e9917e5fb79c26b00ea03077a
Reviewed-on: https://go-review.googlesource.com/76025
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Be more pessimistic when parsing if/switch/for headers for better error
messages when things go wrong.
Fixes#22581.
Change-Id: Ibb99925291ff53f35021bc0a59a4c9a7f695a194
Reviewed-on: https://go-review.googlesource.com/76290
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The NonUTF8 field provides users with a way to explictly tell the
ZIP writer to avoid setting the UTF-8 flag.
This is necessary because many readers:
1) (Still) do not support UTF-8
2) And use the local system encoding instead
Thus, even though character encodings other than CP-437 and UTF-8
are not officially supported by the ZIP specification, pragmatically
the world has permitted use of them.
When a non-standard encoding is used, it is the user's responsibility
to ensure that the target system is expecting the encoding used
(e.g., producing a ZIP file you know is used on a Chinese version of Windows).
We adjust the detectUTF8 function to account for Shift-JIS and EUC-KR
not being identical to ASCII for two characters.
We don't need an API for users to explicitly specify that they are encoding
with UTF-8 since all single byte characters are compatible with all other
common encodings (Windows-1256, Windows-1252, Windows-1251, Windows-1250,
IEC-8859, EUC-KR, KOI8-R, Latin-1, Shift-JIS, GB-2312, GBK) except for
the non-printable characters and the backslash character (all of which
are invalid characters in a path name anyways).
Fixes#10741
Change-Id: I9004542d1d522c9137973f1b6e2b623fa54dfd66
Reviewed-on: https://go-review.googlesource.com/75592
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Updates #21317
@mdempsky fixed issue #21317 with CL 66810,
so lock a test in to ensure we don't regress.
The test is manual for now before test/run.go
has support for matching column numbers so do
it old school and match expected output after
an exec.
Change-Id: I6c2a66ddf04248f79d17ed7033a3280d50e41562
Reviewed-on: https://go-review.googlesource.com/76150
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, assigning a []T where T is a go:notinheap type generates an
unnecessary write barrier for storing the slice pointer.
This fixes this by teaching HasHeapPointer that this type does not
have a heap pointer, and tweaking the lowering of slice assignments so
the pointer store retains the correct type rather than simply lowering
it to a *uint8 store.
Change-Id: I8bf7c66e64a7fefdd14f2bd0de8a5a3596340bab
Reviewed-on: https://go-review.googlesource.com/76027
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The cache will take care of keeping go test -tags lldb fast.
Installing runtime/cgo this way just makes all the checkNotStale
tests think runtime/cgo is out of date.
Should fix ios builders.
Fixes#22509.
Change-Id: If092cc4feb189eb848b6a22f6d22b89b70df219c
Reviewed-on: https://go-review.googlesource.com/76020
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The change in cmd/dist ignores debug output, instead of assuming
any output is from the template.
The change in cmd/go makes the debug output show the package name
on every line, so that interlaced prints can be deinterlaced.
Change-Id: Ic3d59ee0256271067cb9be2fde643a0e19405375
Reviewed-on: https://go-review.googlesource.com/76019
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Even though cmd/dist has historically distinguished "CC for gohostos/gohostarch"
from "CC for target goos/goarch", it has not recorded that distinction
for later use by cmd/cgo and cmd/go. Now that content-based staleness
includes the CC setting in the decision about when to rebuild packages,
the go command needs to know the details of which CC to use when.
Otherwise lots of things look out of date and (worse) may be rebuilt with
the wrong CC.
A related issue is that users may want to be able to build a toolchain
capable of cross-compiling for two different non-host targets, and
to date we've required that CC_FOR_TARGET apply to both.
This CL introduces CC_FOR_${GOOS}_${GOARCH}, so that you can
(for example) set CC_FOR_linux_arm and CC_FOR_linux_arm64
separately on a linux/ppc64 host and be able to cross-compile to
either arm or arm64 with the right toolchain.
Fixes#8161.
Half of a fix for #22509.
Change-Id: I7a43769f39d859f659d31bc96980918ba102fb83
Reviewed-on: https://go-review.googlesource.com/76018
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
There are multiple valid reasons a tool might print to stderr.
As long as we get the expected output on stdout, that's fine.
Fixes#22588.
Change-Id: I9c5d32da08288cb26dd575530a8257cd5f375367
Reviewed-on: https://go-review.googlesource.com/76017
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Clearly -a means don't use the cache.
An oversight that it did.
Fixes#22586.
Change-Id: I250b351439bd3fb5f8d6efc235b614f0a75ca64c
Reviewed-on: https://go-review.googlesource.com/76016
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This was a hack to make a new make.bash avoid reusing installed packages.
The new content-based staleness is precise enough not to need this hack;
now it's just causing unnecessary rebuilds: if a package doesn't import "runtime",
for example, it doesn't need to be recompiled when runtime changes.
(It does need to be relinked, and we still arrange that.)
Change-Id: I4ddf6e16d754cf21b16e9db1ed52bddbf82e96c6
Reviewed-on: https://go-review.googlesource.com/76015
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
I thought SSA check was enabled for those tests, but in fact it
was not. Enable it. So we have SSA check on for at least some
tests on all architectures.
Updates #22499.
Change-Id: I51fcdda3af7faab5aeb33bf46c6db309285ce42c
Reviewed-on: https://go-review.googlesource.com/76024
Reviewed-by: Keith Randall <khr@golang.org>
The ModifiedTime and ModifiedDate fields are not expressive enough
for many of the time extensions that have since been added to ZIP,
nor are they easy to access since they in a legacy MS-DOS format,
and must be set and retrieved via the SetModTime and ModTime methods.
Instead, we add new field Modified of time.Time type that contains
all of the previous information and more.
Support for extended timestamps have been attempted before, but the
change was reverted because it provided no ability for the user to
specify the timezone of the legacy MS-DOS fields.
Technically the old API did not either, but users were manually offsetting
the timestamp to achieve the same effect.
The Writer now writes the legacy timestamps according to the timezone
of the FileHeader.Modified field. When the Modified field is set via
the SetModTime method, it is in UTC, which preserves the old behavior.
The Reader attempts to determine the timezone if both the legacy
and extended timestamps are present since it can compute the delta
between the two values.
Since Modified is a superset of the information in ModifiedTime and ModifiedDate,
we mark ModifiedTime, ModifiedDate, ModTime, and SetModTime as deprecated.
Fixes#18359
Change-Id: I29c6bc0a62908095d02740df3e6902f50d3152f1
Reviewed-on: https://go-review.googlesource.com/74970
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is like a write-only subset of bytes.Buffer with an
allocation-free String method.
Fixes#18990.
Change-Id: Icdf7240f4309a52924dc3af04a39ecd737a210f4
Reviewed-on: https://go-review.googlesource.com/74931
Run-TryBot: Caleb Spare <cespare@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The simple example would contribute to better understanding
what function does.
Change-Id: I36a2952df8b0e1762ec0cd908a867c457f39366e
Reviewed-on: https://go-review.googlesource.com/75970
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing NaCl filesystem Link system call erroneously allowed
a caller to call Link on an existing target which violates the POSIX
standard and effectively corrupted the internal filesystem
representation.
Fixes#22383
Change-Id: I77b16c37af9bf00a1799fa84277f066180edac47
Reviewed-on: https://go-review.googlesource.com/76110
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If the only thing changing in the binary is the embedded main.a action ID,
go install was declining to install the binary, but go list could see that the
binary needed reinstalling (was stale).
Fixes#22531.
Change-Id: I4a53b0ebd4c34aad907bab7da571fada545f3c6f
Reviewed-on: https://go-review.googlesource.com/76014
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
I do not remember why we require deps.go to have a hard-coded
copy of the dependency information for cmd/go, when we can
read it from the source files instead. The answer probably involves
cmd/dist once being a C program.
In any event, stop doing that, which will eliminate the builder-only
failures in the builder-only deps test.
Change-Id: I0abd384c47401940ca08427b5be544812edcbe7f
Reviewed-on: https://go-review.googlesource.com/76021
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
I typed 'go list -josn' without realizing I'd mistyped json, and I was confused for
quite a while as to why I was staring at the 'go help json' text: the actual problem
(a missing flag) scrolls far off the screen. If people want the full text, they can
easily ask for it, but don't drown the important bit - unrecognized flag or other
improper usage - with pages of supporting commentary. The help text does not
help people who just need to be told about a typo.
Change-Id: I179c431baa831e330f3ee495ce0a5369319962d5
Reviewed-on: https://go-review.googlesource.com/76013
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Updates #22389
@mdempsky's CL 70850 fixed the unnecessary
compile stack trace printing during ICE diagnostics.
This CL adds a test to lock in this behavior.
Change-Id: I9ce49923c80b78cb8c0bb5dc4af3c860a43d63ba
Reviewed-on: https://go-review.googlesource.com/74630
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
On Plan 9, some file servers, like ramfs, handle the read
offset when reading directories. However, the offset isn't
valid anymore after directory entries have been removed
between successive calls to read.
This issue happens when os.RemoveAll is called on a
directory that doesn't fit on a single 9P response message.
In this case, the first part of the directory is read,
then directory entries are removed and the second read
will be incomplete because the read offset won't be valid
anymore. Consequently, the content of the directory will
only be partially removed.
We change RemoveAll to call fd.Seek(0, 0) before calling
fd.Readdirnames, so the read offset will always be reset
after removing the directory entries.
After adding TestRemoveAllLarge, we noticed the same issue
appears on NaCl and the same fix applies as well.
Fixes#22572.
Change-Id: Ifc76ea7ccaf0168c34dc8ec0f400dc04db1baf8f
Reviewed-on: https://go-review.googlesource.com/75974
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If the current time is equal to the NextUpdate time, then the CRL
should be considered expired.
Fixes#22568.
Change-Id: I55bcc95c881097e826d43eb816a43b9b377b0265
Reviewed-on: https://go-review.googlesource.com/71972
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Filippo Valsorda <hi@filippo.io>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use internal/testenv package to get the right go binary.
Otherwise, I think we're just grabbing an old one from the environment.
Fixes#22560.
Change-Id: Id5b743b24717e15ec8ffbcfae4dc3e5f6a87b9a9
Reviewed-on: https://go-review.googlesource.com/76090
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: David Chase <drchase@google.com>
Otherwise, one can't run "go fmt" on a directory containing Go files if
none of them are buildable (e.g. because of build tags). This is
counter-intuitive, as fmt will format all Go files anyway.
If we encounter such a load error, ignore it and carry on. All other
load errors, such as when a package can't be found, should still be
shown to the user.
Add a test for the two kinds of load errors. Use fmt -n so that any
changes to the formatting of the files in testdata don't actually get
applied. The load errors still occur with -n, so the test does its job.
Fixes#22183.
Change-Id: I99d0c0cdd29015b6a3f5286a9bbff50757c78e0d
Reviewed-on: https://go-review.googlesource.com/75930
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
A statement like
foo = bar + qux
might compile to
AX := AX + BX
resulting in a regkill for AX before this instruction.
The buggy behavior is to kill AX "at" this instruction,
before it has executed. (Code generation of no-instruction
values like RegKills applies their effects at the
next actual instruction emitted).
However, bar is still associated with AX until after the
instruction executes, so the effect of the regkill must
occur at the boundary between this instruction and the
next. Similarly, the new value bound to AX is not visible
until this instruction executes (and in the case of values
that require multiple instructions in code generation, until
all of them have executed).
The ranges are adjusted so that a value's start occurs
at the next following instruction after its evaluation,
and the end occurs after (execution of) the first
instruction following the end of the lifetime as a value.
(Notice the asymmetry; the entire value must be finished
before it is visible, but execution of a single instruction
invalidates. However, the value *is* visible before that
next instruction executes).
The test was adjusted to make it insensitive to the result
numbering for variables printed by gdb, since that is not
relevant to the test and makes the differences introduced
by small changes larger than necessary/useful.
The test was also improved to present variable probes
more intuitively, and also to allow explicit indication
of "this variable was optimized out"
Change-Id: I39453eead8399e6bb05ebd957289b112d1100c0e
Reviewed-on: https://go-review.googlesource.com/74090
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For structs, slices, strings, interfaces, etc, propagation of
names to their components (e.g., complex.real, complex.imag)
is fragile (depends on phase ordering) and not done right
for the "dec" pass.
The dec pass is subsumed into decomposeBuiltin,
and then names are pushed into the args of all
OpFooMake opcodes.
compile/ssa/debug_test.go was fixed to pay attention to
variable values, and the reference files include checks
for the fixes in this CL (which make debugging better).
Change-Id: Ic2591ebb1698d78d07292b92c53667e6c37fa0cd
Reviewed-on: https://go-review.googlesource.com/73210
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This test was taking too long on ppc64x.
There were a few reasons.
The first is that the page size on ppc64x is 64k instead of 4k.
That's 16x more work.
The second is that the generic Index is pretty bad in this case.
It first calls IndexByte which does a bunch of setup work only to find
the byte we're looking for at index 0. Then it calls Equal which
has to look at the whole string to find a difference on the last byte.
To fix, just limit our attention to near the end of the page.
Change-Id: I6b8bcbb94652a2da853862acc23803def0c49303
Reviewed-on: https://go-review.googlesource.com/76050
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This change adds code generation tests for multiplication by ±2ⁿ for
arm and arm64, in preparation for a future CL which will remove the
relevant architecture-specific SSA rules (the reduction is already
performed by rules in generic.rules added in CL 36323).
Change-Id: Iebdd5c3bb2fc632c85888569ff0c49f78569a862
Reviewed-on: https://go-review.googlesource.com/75752
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This makes the output they print refer to the code that called them.
For example, instead of
=== RUN TestWindowsStackMemoryCgo
--- SKIP: TestWindowsStackMemoryCgo (0.00s)
testenv.go:213: skipping known flaky test ...
PASS
we see
=== RUN TestWindowsStackMemoryCgo
--- SKIP: TestWindowsStackMemoryCgo (0.00s)
crash_cgo_test.go:471: skipping known flaky test ...
PASS
Change-Id: I5f4c77c3aeab5c0e43c6dde2f15db70a6df24603
Reviewed-on: https://go-review.googlesource.com/76031
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The go repository contains a mix of github.com/golang/go/issues/xxxxx
and golang.org/issues/xxxxx URLs for references to issues in the issue
tracker. We should use one for consistency, and golang.org is preferred
in case the project moves the issue tracker in the future.
This reasoning is taken from a comment Sam Whited left on a CL I
recently opened: https://go-review.googlesource.com/c/go/+/73890.
In that CL I referenced an issue using its github.com URL, because other
tests in the file I was changing contained references to issues using
their github.com URL. Sam Whited left a comment on the CL stating I
should change it to the golang.org URL.
If new code is intended to reference issues via golang.org and not
github.com, existing code should be updated so that precedence exists
for contributors who are looking at the existing code as a guide for the
code they should write.
Change-Id: I3b9053fe38a1c56fc101a8b7fd7b8f310ba29724
Reviewed-on: https://go-review.googlesource.com/75673
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Example usage of functionality implemented in CL 66710.
Change-Id: I87d6e4d2fb7a60e4ba1e6ef02715480eb7e8f8bd
Reviewed-on: https://go-review.googlesource.com/76011
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Introduce the presence of the monotonic time reading first,
before the paragraph about comparison that mentions it multiple times.
Change-Id: I91e31e118be013eee6c258163a1bb2cb42501527
Reviewed-on: https://go-review.googlesource.com/76010
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL makes "go install" behave the way many users expect:
install only the things named on the command line.
Future builds still run as fast, thanks to the new build cache (CL 75473).
To install dependencies as well (the old behavior), use "go install -i".
Actual definitions aside, what most users know and expect of "go install"
is that (1) it installs what you asked, and (2) it's fast, unlike "go build".
It was fast because it installed dependencies, but installing dependencies
confused users repeatedly (see for example #5065, #6424, #10998, #12329,
"go build" and "go test" so that they could be "fast" too, but that only
created new opportunities for confusion. We also had to add -installsuffix
and then -pkgdir, to allow "fast" even when dependencies could not be
installed in the usual place.
The recent introduction of precise content-based staleness logic means that
the go command detects the need for rebuilding packages more often than it
used to, with the consequence that "go install" rebuilds and reinstalls
dependencies more than it used to. This will create more new opportunities
for confusion and will certainly lead to more issues filed like the ones
listed above.
CL 75743 introduced a build cache, separate from the install locations.
That cache makes all operations equally incremental and fast, whether or
not the operation is "install" or "build", and whether or not "-i" is used.
Installing dependencies is no longer necessary for speed, it has confused
users in the past, and the more accurate rebuilds mean that it will confuse
users even more often in the future. This CL aims to end all that confusion
by not installing dependencies by default.
By analogy with "go build -i" and "go test -i", which still install
dependencies, this CL introduces "go install -i", which installs
dependencies in addition to the things named on the command line.
Fixes#5065.
Fixes#6424.
Fixes#10998.
Fixes#12329.
Fixes#18981.
Fixes#22469.
Another step toward #4719.
Change-Id: I3d7bc145c3a680e2f26416e182fa0dcf1e2a15e5
Reviewed-on: https://go-review.googlesource.com/75850
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds an automatic, limited "go vet" to "go test".
If the building of a test package fails, vet is not run.
If vet fails, the test is not run.
The goal is that users don't notice vet as part of the "go test"
process at all, until vet speaks up and says something important.
This should help users find real problems in their code faster
(vet can just point to them instead of needing to debug a
test failure) and expands the scope of what kinds of things
vet can help with.
The "go vet" runs in parallel with the linking of the test binary,
so for incremental builds it typically does not slow the overall
"go test" at all: there's spare machine capacity during the link.
all.bash has less spare machine capacity. This CL increases
the time for all.bash on my laptop from 4m41s to 4m48s (+2.5%)
To opt out for a given run, use "go test -vet=off".
The vet checks used during "go test" are a subset of the full set,
restricted to ones that are 100% correct and therefore acceptable
to make mandatory. In this CL, that set is atomic, bool, buildtags,
nilfunc, and printf. Including printf is debatable, but I want to
include it for now and find out what needs to be scaled back.
(It already found one real problem in package os's tests that
previous go vet os had not turned up.)
Now that we can rely on type information it may be that printf
should make its function-name-based heuristic less aggressive
and have a whitelist of known print/printf functions.
Determining the exact set for Go 1.10 is #18085.
Running vet also means that programs now have to type-check
with both cmd/compile and go/types in order to pass "go test".
We don't start vet until cmd/compile has built the test package,
so normally the added go/types check doesn't find anything.
However, there is at least one instance where go/types is more
precise than cmd/compile: declared and not used errors involving
variables captured into closures.
This CL includes a printf fix to os/os_test.go and many declared
and not used fixes in the race detector tests.
Fixes#18084.
Change-Id: I353e00b9d1f9fec540c7557db5653e7501f5e1c9
Reviewed-on: https://go-review.googlesource.com/74356
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds caching of successful test results, keyed by the
action ID of the test binary and its command line arguments.
Suppose you run:
go test -short std
<edit a typo in a comment in math/big/float.go>
go test -short std
Before this CL, the second go test would re-run all the tests
for the std packages. Now, the second go test will use the cached
result immediately (without any compile or link steps) for any
packages that do not transitively import math/big, and then
it will, after compiling math/big and seeing that the .a file didn't
change, reuse the cached test results for the remaining packages
without any additional compile or link steps.
Suppose that instead of editing a typo you made a substantive
change to one function, but you left the others (including their
line numbers) unchanged. Then the second go test will re-link
any of the tests that transitively depend on math/big, but it still
will not re-run the tests, because the link will result in the same
test binary as the first run.
The only cacheable test arguments are:
-cpu
-list
-parallel
-run
-short
-v
Using any other test flag disables the cache for that run.
The suggested argument to mean "turn off the cache" is -count=1
(asking "please run this 1 time, not 0").
There's an open question about re-running tests when inputs
like environment variables and input files change. For now we
will assume that users will bypass the test cache when they
need to do so, using -count=1 or "go test" with no arguments.
This CL documents the new cache but also documents the
previously-undocumented distinction between "go test" with
no arguments (now called "local directory mode") and with
arguments (now called "package list mode"). It also cleans up
a minor detail of package list mode buffering that used to change
whether test binary stderr was sent to go command stderr based
on details like exactly how many packages were listed or
how many CPUs the host system had. Clearly the file descriptor
receiving output should not depend on those, so package list mode
now consistently merges all output to stdout, where before it
mostly did that but not always.
Fixes#11193.
Change-Id: I120edef347b9ddd5b10e247bfd5bd768db9c2182
Reviewed-on: https://go-review.googlesource.com/75631
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Right rotation is achieved using negative k in RotateLeft*(x, k). Add
examples demonstrating that functionality.
Change-Id: I15dab159accd2937cb18d3fa8ca32da8501567d3
Reviewed-on: https://go-review.googlesource.com/75371
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
CL 65071 enabled inlining for local closures with no captures.
To determine safety of inlining a call sites, we check whether the
variable holding the closure has any assignments after its original
definition.
Unfortunately, that check did not catch OAS2MAPR and OAS2DOTTYPE,
leading to incorrect inlining when a variable holding a closure was
subsequently reassigned through a type conversion or a 2-valued map
access.
There was another more subtle issue wherein reassignment check would
always return a false positive for closure calls inside other
closures. This was caused by the Name.Curfn field of local variables
pointing to the OCLOSURE node instead of the corresponding ODCLFUNC,
which resulted in reassigned walking an empty Nbody and thus never
seeing any reassignments.
This CL fixes these oversights and adds many more tests for closure
inlining which ensure not only that inlining triggers but also the
correctness of the resulting code.
Updates #15561
Change-Id: I74bdae849c4ecfa328546d6d62b512e8d54d04ce
Reviewed-on: https://go-review.googlesource.com/75770
Reviewed-by: Hugues Bruant <hugues.bruant@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This avoids the problem in which appending to a slice returned by
Split can affect subsequent slices.
Fixes#21149.
Change-Id: Ie3df2b9ceeb9605d4625f47d49073c5f348cf0a1
Reviewed-on: https://go-review.googlesource.com/74510
Reviewed-by: Jelte Fennema <github-tech@jeltef.nl>
Reviewed-by: Robert Griesemer <gri@golang.org>
Make sure Index and IndexByte don't read past the queried byte slice.
Hopefully will be helpful for CL 33597.
Also remove the code which maps/unmaps the Go heap.
Much safer to play with protection bits off-heap.
Change-Id: I50d73e879b2d83285e1bc7c3e810efe4c245fe75
Reviewed-on: https://go-review.googlesource.com/75890
Reviewed-by: Ian Lance Taylor <iant@golang.org>
