If there are mutually recursive functions, there is a cycle in
the dependency graph, so the order is actually dependency order
among the strongly connected components: mutually recursive
functions get put into the same batch and analyzed together.
(Until now the entire package was put in one batch.)
The non-recursive case (single function, maybe with some
closures inside) will be able to be more precise about inputs
that escape only back to outputs, but that is not implemented yet.
R=ken2
CC=golang-dev, lvd
https://golang.org/cl/6304050
CL 4313064 fixed its test case but did not address a
general enough problem:
type T1 struct { F *T2 }
type T2 T1
type T3 T2
could still end up copying the definition of T1 for T2
before T1 was done being evaluated, or T3 before T2
was done.
In order to propagate the updates correctly,
record a copy of an incomplete type for re-execution
once the type is completed. Roll back CL 4313064.
Fixes#3709.
R=ken2
CC=golang-dev, lstoakes
https://golang.org/cl/6301059
The original implementation of closures created the
underlying top-level function during walk, which is fairly
late in the compilation process and caused ordering-based
complications due to earlier stages that had to be repeated
any number of times.
Create the underlying function during typecheck, much
earlier, so that later stages can be run just once.
The result is a simpler compilation sequence.
R=ken2
CC=golang-dev
https://golang.org/cl/6279049
Drop expecttaken function in favor of extra argument
to gbranch and bgen. Mark loop condition as likely to
be true, so that loops are generated inline.
The main benefit here is contiguous code when trying
to read the generated assembly. It has only minor effects
on the timing, and they mostly cancel the minor effects
that aligning function entry points had. One exception:
both changes made Fannkuch faster.
Compared to before CL 6244066 (before aligned functions)
benchmark old ns/op new ns/op delta
BenchmarkBinaryTree17 4222117400 4201958800 -0.48%
BenchmarkFannkuch11 3462631800 3215908600 -7.13%
BenchmarkGobDecode 20887622 20899164 +0.06%
BenchmarkGobEncode 9548772 9439083 -1.15%
BenchmarkGzip 151687 152060 +0.25%
BenchmarkGunzip 8742 8711 -0.35%
BenchmarkJSONEncode 62730560 62686700 -0.07%
BenchmarkJSONDecode 252569180 252368960 -0.08%
BenchmarkMandelbrot200 5267599 5252531 -0.29%
BenchmarkRevcomp25M 980813500 985248400 +0.45%
BenchmarkTemplate 361259100 357414680 -1.06%
Compared to tip (aligned functions):
benchmark old ns/op new ns/op delta
BenchmarkBinaryTree17 4140739800 4201958800 +1.48%
BenchmarkFannkuch11 3259914400 3215908600 -1.35%
BenchmarkGobDecode 20620222 20899164 +1.35%
BenchmarkGobEncode 9384886 9439083 +0.58%
BenchmarkGzip 150333 152060 +1.15%
BenchmarkGunzip 8741 8711 -0.34%
BenchmarkJSONEncode 65210990 62686700 -3.87%
BenchmarkJSONDecode 249394860 252368960 +1.19%
BenchmarkMandelbrot200 5273394 5252531 -0.40%
BenchmarkRevcomp25M 996013800 985248400 -1.08%
BenchmarkTemplate 360620840 357414680 -0.89%
R=ken2
CC=golang-dev
https://golang.org/cl/6245069
It's sad to introduce a new macro, but rnd shows up consistently
in profiles, and the function call overwhelms the two arithmetic
instructions it performs.
R=r
CC=golang-dev
https://golang.org/cl/6260051
for expr1, expr2 = range slice
was assigning to expr1 and expr2 in sequence
instead of in parallel. Now it assigns in parallel,
as it should. This matters for things like
for i, x[i] = range slice.
Fixes#3464.
R=ken2
CC=golang-dev
https://golang.org/cl/6252048
* Eliminate bounds check on known small shifts.
* Rewrite x<<s | x>>(32-s) as a rotate (constant s).
* More aggressive (but still minimal) range analysis.
R=ken, dave, iant
CC=golang-dev
https://golang.org/cl/6209077
Before:
./x.go:6: first argument to append must be slice; have nil
After:
./x.go:6: first argument to append must be typed slice; have untyped nil
Fixes#3616.
R=ken2
CC=golang-dev
https://golang.org/cl/6209067
The two optimizations for small structs and arrays
were missing the implicit cast from ideal bool.
Fixes#3351.
R=rsc, lvd
CC=golang-dev
https://golang.org/cl/5848062
Windows has paths like C:/Users/ADMIN~1. Also, it so happens
that go/parser allows ~ in import paths. So does the spec.
Fixes the build too.
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/5777073
1. consistent usage section (go tool xxx)
2. reformat cmd/ld document with minor correction
document which -H flags are valid on which ld
document -d flag can't be used on Windows.
document -Hwindowsgui
R=golang-dev, r, rsc
CC=golang-dev
https://golang.org/cl/5782043
The spec is looser than the current implementation.
The spec edit was made in CL 4444050 (May 2011)
but I never implemented it.
Fixes#3244.
R=ken2
CC=golang-dev
https://golang.org/cl/5785049
GOROOT_FINAL is a build parameter that means "eventually
the Go tree will be installed here". Make the file name information
match that eventual location.
Fixes#3180.
R=ken, ken
CC=golang-dev
https://golang.org/cl/5742043
I tried before to make relative imports work by simply
invoking the compiler in the right directory, so that
an import of ./foo could be resolved by ./foo.a.
This required creating a separate tree of package binaries
that included the full path to the source directory, so that
/home/gopher/bar.go would be compiled in
tmpdir/work/local/home/gopher and perhaps find
a ./foo.a in that directory.
This model breaks on Windows because : appears in path
names but cannot be used in subdirectory names, and I
missed one or two places where it needed to be removed.
The model breaks more fundamentally when compiling
a test of a package that lives outside the Go path, because
we effectively use a ./ import in the generated testmain,
but there we want to be able to resolve the ./ import
of the test package to one directory and all the other ./
imports to a different directory. Piggybacking on the compiler's
current working directory is then no longer possible.
Instead, introduce a new compiler option -D prefix that
makes the compiler turn a ./ import into prefix+that,
so that import "./foo" with -D a/b/c turns into import
"a/b/c/foo". Then we can invent a package hierarchy
"_/" with subdirectories named for file system paths:
import "./foo" in the directory /home/gopher becomes
import "_/home/gopher/foo", and since that final path
is just an ordinary import now, all the ordinary processing
works, without special cases.
We will have to change the name of the hierarchy if we
ever decide to introduce a standard package with import
path "_", but that seems unlikely, and the detail is known
only in temporary packages that get thrown away at the
end of a build.
Fixes#3169.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5732045
The two string comparison optimizations were
missing the implicit cast from ideal bool.
Fixes#3119.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5696071
They are broken and hard to make work.
They have never worked: if you import "/tmp/x"
from "/home/rsc/p.c" then the compiler rewrites
this into import "/home/rsc/tmp/x", which is
clearly wrong.
Also we just disallowed the : character in import
paths, so import "c:/foo" is already not allowed.
Finally, in order to support absolute paths well in
a build tool we'd have to provide a mechanism to
instruct the compiler to resolve absolute imports
by looking in some other tree (where the binaries live)
and provide a mapping from absolute path to location
in that tree. This CL avoids adding that complexity.
This is not part of the language spec (and should not be),
so no spec change is needed.
If we need to make them work later, we can.
R=ken2
CC=golang-dev
https://golang.org/cl/5712043
Also allow multiple invalid import statements in a
single file.
Fixes#3021. The changes to go/parser and the
language specifcation have already been committed.
R=rsc, gri
CC=golang-dev
https://golang.org/cl/5672084
This is a manual undo of CL 5674098.
It does not implement the even less strict spec
that we just agreed on, but it gets us back where
we were at the last weekly.
R=ken2
CC=golang-dev
https://golang.org/cl/5683069