With this change, the shift checking code matches the corresponding
go/types code, but for the differences in the internal error reporting,
and call of check.overflow.
The change leads to the recording of an untyped int value if the RHS
of a non-constant shift is an untyped integer value. Adjust the type
in the compiler's irgen accordingly. Add test/shift3.go to verify
behavior.
Change-Id: I20386fcb1d5c48becffdc2203081fb70c08b282d
Reviewed-on: https://go-review.googlesource.com/c/go/+/398236
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The SHRX/SHLX instruction can take any general register as the shift count operand, and can read source from memory. This CL introduces some operators to combine load and shift to one instruction.
For #47120
Change-Id: I13b48f53c7d30067a72eb2c8382242045dead36a
Reviewed-on: https://go-review.googlesource.com/c/go/+/385174
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
LZCNT is similar to BSR, but BSR(x) is undefined when x == 0, so using
LZCNT can avoid a special case for zero input. Except that case,
LZCNTQ(x) == 63-BSRQ(x) and LZCNTL(x) == 31-BSRL(x).
And according to https://www.agner.org/optimize/instruction_tables.pdf,
LZCNT instructions are much faster than BSR on AMD CPU.
name old time/op new time/op delta
LeadingZeros-8 0.91ns ± 1% 0.80ns ± 7% -11.68% (p=0.000 n=9+9)
LeadingZeros8-8 0.98ns ±15% 0.91ns ± 1% -7.34% (p=0.000 n=9+9)
LeadingZeros16-8 0.94ns ± 3% 0.92ns ± 2% -2.36% (p=0.001 n=10+10)
LeadingZeros32-8 0.89ns ± 1% 0.78ns ± 2% -12.49% (p=0.000 n=10+10)
LeadingZeros64-8 0.92ns ± 1% 0.78ns ± 1% -14.48% (p=0.000 n=10+10)
Change-Id: I125147fe3d6994a4cfe558432780408e9a27557a
Reviewed-on: https://go-review.googlesource.com/c/go/+/396794
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL add MOVBE support for 16-bit version, but MOVBEWload is
excluded because it does not satisfy zero extented.
For #51724
Change-Id: I3fadf20bcbb9b423f6355e6a1e340107e8e621ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/396617
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
The -G compiler option doesn't exist anymore. Update some variable
names and comments to reflect the new reality.
Change-Id: I227e9c59a01615c3a40c3869102e8045cb012980
Reviewed-on: https://go-review.googlesource.com/c/go/+/397254
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For syntax errors in various (syntactic) lists, instead of reporting
a set of "expected" tokens (which may be incomplete), provide context
and mention "possibly missing" tokens. The result is a friendlier and
more accurate error message.
Fixes#49205.
Change-Id: I38ae7bf62febfe790075e62deb33ec8c17d64476
Reviewed-on: https://go-review.googlesource.com/c/go/+/396914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When parsing method declarations in an interface, the parser has
for historic reasons gracefully handled a list of method names with
a single (common) signature, and then reported an error. For example
interface {
m1, m2, m3 (x int)
}
This code originally came from the very first parser for Go which
initially permitted such declarations (or at least assumed that
people would write such declarations). Nobody is doing this at this
point, so there's no need for being extra careful here. Remove the
respective code and adjust the corresponding test.
Change-Id: If6f9b398bbc9e425dcd4328a80d8bf77c37fe8b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/396654
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 367755 added soleComponent for handling 1-byte type interface conversion.
This implementation must be kept in sync with Type.SoleComponent, but it
does not. When seeing a blank field in struct, we must continue looking
at the field type to find sole component, if any. The current code just
terminate immediately, which causes wrong sole component type returned.
Fixes#52020
Change-Id: I4f506fe094fa7c5532de23467a4f9139476bb0a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/396614
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Use the 1.17 compiler error message, sans "array" prefix.
Change-Id: I0e70781c5ff02dca30a2004ab4d0ea82b0849eae
Reviewed-on: https://go-review.googlesource.com/c/go/+/396296
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
CL 394074 broke the noopt builder. Something about time.After's inlining
depends on the build flags to make.bash, not the build flags that run.go
passes.
Change-Id: Ib284c66ea2008a4d32829c055d57c54a34ec3fb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/396037
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Historically, we sometimes recorded imports based on either package
path ("net/http") or object file path ("net/http.a"). But modern Go
build systems always use package path, and the extra ".a" suffix
doesn't mean anything anyway.
Change-Id: I6060ef8bafa324168710d152a353f4d8db062133
Reviewed-on: https://go-review.googlesource.com/c/go/+/395254
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Add a new rewrite rule to merge ANDconst and UBFX into
UBFX.
Add test cases.
Change-Id: I24d6442d0c956d7ce092c3a3858d4a3a41771670
Reviewed-on: https://go-review.googlesource.com/c/go/+/377054
Trust: Fannie Zhang <Fannie.Zhang@arm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL updates test/run.go to compile xxx.dir/x.go with a package
path of "test/x" instead of just "x". This prevents collisions with
standard library packages.
It also requires updating a handful of tests to account for the
updated package paths.
Fixes#25693.
Change-Id: I49208c56ab3cb229ed667d547cd6e004d2175fcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/395258
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 187617 removed oldescape_linkname.go, but forgot to remove this
directory too.
Change-Id: I6d208c4d96d636b3df93adec1ee22fe1d4f5f61d
Reviewed-on: https://go-review.googlesource.com/c/go/+/395259
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
bug302 compiles p.go with -p=p, and then manually creates a pp.a
archive, and imports it as both "p" and "pp". This is a misuse of
cmd/compile's -p flag, and it isn't representative of how any actual
Go build systems work anyway.
This test made sense back when cmd/compile still wrote out bare object
files, which was then split into separate __.PKGDEF and _go_.o archive
entries when added to a pack archive. But since CL 102236, cmd/compile
always writes out pack files.
Updates #51734.
Change-Id: I4b5de22d348ecc0a72c98b512351c2d267c77736
Reviewed-on: https://go-review.googlesource.com/c/go/+/393896
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, run.go's *dir tests allow "x.go" to be imported
interchangeably as either "x" or "./x". This is generally fine, but
can cause problems when "x" is the name of a standard library
package (e.g., "fixedbugs/bug345.dir/io.go").
This CL is an automated rewrite to change all `import "x"` directives
to use `import "./x"` instead. It has no effect today, but will allow
subsequent CLs to update test/run.go to resolve "./x" to "test/x" to
avoid stdlib collisions.
Change-Id: Ic76cd7140e83b47e764f8a499e59936be2b3c876
Reviewed-on: https://go-review.googlesource.com/c/go/+/395116
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The importer type param index used package name type parameter key,
causing type parameters to be reused/overwritten if two packages in the
import graph had the same combination of (name, declaration name, type
parameter name).
Fix this by instead using the *Package in the key.
Fixes#51836
Change-Id: I881ceaf3cf7c1ab4e0835962350feb552e79b233
Reviewed-on: https://go-review.googlesource.com/c/go/+/394219
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
First law of cmd/compile frontend development: thou shalt not rely on
types.Sym.
This CL replaces Type.OrigSym with Type.OrigType, which semantically
matches what all of the uses within the frontend actually care about,
and avoids using types.Sym, which invariably leads to mistakes because
symbol scoping in the frontend doesn't work how anyone intuitively
expects it to.
Fixes#51765.
Change-Id: I4affe6ee0718103ce5006ab68aa7e1bb0cac6881
Reviewed-on: https://go-review.googlesource.com/c/go/+/394274
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 342350 fixed deadcode panic with dead hidden closures. However, a
closure may contains nested dead hidden closures, so we need to mark
them dead as well.
Fixes#51839
Change-Id: Ib54581adfc1bdea60e74d733cd30fd8e783da983
Reviewed-on: https://go-review.googlesource.com/c/go/+/394079
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
They should not share a shape with regular pointers. We could coalesce
multiple pointer-to-not-in-heap types, but doesn't seem worth it - just
make them fully stenciled.
Fixes#51733
Change-Id: Ie8158177226fbc46a798e71c51897a82f15153df
Reviewed-on: https://go-review.googlesource.com/c/go/+/393895
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
CL 338129 added getDictionaryType to get the dictionary type from the
specified dict param, but still using the one in info.dictParam, which
is wrong.
Fixes#51413
Change-Id: Ie13460c1e5751c4c5fc44479a44f6eed8b3b06e4
Reviewed-on: https://go-review.googlesource.com/c/go/+/391994
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
For hidden closure built during stenciling to implement a function
instantiation, the function may come from other package, not local
package, which causes the ICE for code that re-export the hidden closure
after inlining.
To fix it, use the closure package for export writer when writing out
the closure itself.
Fixes#51423
Change-Id: I23b067ba14e2d602a0fc3b2e99bd9317afbe53ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/391574
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Both the thing we're switching on, as well as the cases we're switching for.
Convert anything containing a type parameter to interface{} before the
comparison happens.
Fixes#51522
Change-Id: I97ba9429ed332cb7d4240cb60f46d42226dcfa5f
Reviewed-on: https://go-review.googlesource.com/c/go/+/391594
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
At this point in stenciling, we have shape types, not raw type parameters.
The code was correct in the other part of this function.
Update #51522
Change-Id: Ife495160a2be5f6af5400363c3efb68dda518b5f
Reviewed-on: https://go-review.googlesource.com/c/go/+/391475
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The -p flag specifies the import path of the package being compiled.
This CL makes it required when invoking the compiler and
adjusts tests that invoke the compiler directly to conform to this
new requirement. The go command already passes the flag, so it
is unmodified in this CL. It is expected that any other Go build systems
also already pass -p, or else they will need to arrange to do so before
updating to Go 1.19. Of particular note, Bazel already does for rules
with an importpath= attribute, which includes all Gazelle-generated rules.
There is more cleanup possible now in cmd/compile, cmd/link,
and other consumers of Go object files, but that is left to future CLs.
Additional historical background follows but can be ignored.
Long ago, before the go command, or modules, or any kind of
versioning, symbols in Go archive files were named using just the
package name, so that for example func F in math/rand and func F in
crypto/rand would both be the object file symbol 'rand.F'. This led to
collisions even in small source trees, which made certain packages
unusable in the presence of other packages and generally was a problem
for Go's goal of scaling to very large source trees.
Fixing this problem required changing from package names to import
paths in symbol names, which was mostly straightforward. One wrinkle,
though, is that the compiler did not know the import path of the
package being compiled; it only knew the package name. At the time,
there was no go command, just Makefiles that people had invoking 6g
(now “go tool compile”) and then copying the resulting object file to
an importable location. That is, everyone had a custom build setup for
Go, because there was no standard one. So it was not particularly
attractive to change how the compiler was invoked, since that would
break approximately every Go user at the time. Instead, we arranged
for the compiler to emit, and other tools reading object files to
recognize, a special import path (the empty string, it turned out)
denoting “the import path of this object file”. This worked well
enough at the time and maintained complete command-line compatibility
with existing Go usage.
The changes implementing this transition can be found by searching
the Git history for “package global name space”, which is what they
eliminated. In particular, CL 190076 (a6736fa4), CL 186263 (758f2bc5),
CL 193080 (1cecac81), CL 194053 (19126320), and CL 194071 (531e6b77)
did the bulk of this transformation in January 2010.
Later, in September 2011, we added the -p flag to the compiler for
diagnostic purposes. The problem was that it was easy to create import
cycles, especially in tests, and these could not be diagnosed until
link time. You'd really want the compiler to diagnose these, for
example if the compilation of package sort noticed it was importing a
package that itself imported "sort". But the compilation of package
sort didn't know its own import path, and so it could not tell whether
it had found itself as a transitive dependency. Adding the -p flag
solved this problem, and its use was optional, since the linker would
still diagnose the import cycle in builds that had not updated to
start passing -p. This was CL 4972057 (1e480cd1).
There was still no go command at this point, but when we introduced
the go command we made it pass -p, which it has for many years at this
point.
Over time, parts of the compiler began to depend on the presence of
the -p flag for various reasonable purposes. For example:
In CL 6497074 (041fc8bf; Oct 2012), the race detector used -p to
detect packages that should not have race annotations, such as
runtime/race and sync/atomic.
In CL 13367052 (7276c02b; Sep 2013), a bug fix used -p to detect the
compilation of package reflect.
In CL 30539 (8aadcc55; Oct 2016), the compiler started using -p to
identify package math, to be able to intrinsify calls to Sqrt inside
that package.
In CL 61019 (9daee931; Sep 2017), CL 71430 (2c1d2e06; Oct 2017), and
later related CLs, the compiler started using the -p value when
creating various DWARF debugging information.
In CL 174657 (cc5eaf93; May 2019), the compiler started writing
symbols without the magic empty string whenever -p was used, to reduce
the amount of work required in the linker.
In CL 179861 (dde7c770; Jun 2019), the compiler made the second
argument to //go:linkname optional when -p is used, because in that
case the compiler can derive an appropriate default.
There are more examples. Today it is impossible to compile the Go
standard library without using -p, and DWARF debug information is
incomplete without using -p.
All known Go build systems pass -p. In particular, the go command
does, which is what nearly all Go developers invoke to build Go code.
And Bazel does, for go_library rules that set the importpath
attribute, which is all rules generated by Gazelle.
Gccgo has an equivalent of -p and has required its use in order to
disambiguate packages with the same name but different import paths
since 2010.
On top of all this, various parts of code generation for generics
are made more complicated by needing to cope with the case where -p
is not specified, even though it's essentially always specified.
In summary, the current state is:
- Use of the -p flag with cmd/compile is required for building
the standard library, and for complete DWARF information,
and to enable certain linker speedups.
- The go command and Bazel, which we expect account for just
about 100% of Go builds, both invoke cmd/compile with -p.
- The code in cmd/compile to support builds without -p is
complex and has become more complex with generics, but it is
almost always dead code and therefore not worth maintaining.
- Gccgo already requires its equivalent of -p in any build
where two packages have the same name.
All this supports the change in this CL, which makes -p required
and adjusts tests that invoke cmd/compile to add -p appropriately.
Future CLs will be able to remove all the code dealing with the
possibility of -p not having been specified.
Change-Id: I6b95b9d4cffe59c7bac82eb273ef6c4a67bb0e43
Reviewed-on: https://go-review.googlesource.com/c/go/+/391014
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is a feature that is not understood well enough and may have
subtle repercussions impacting future changes. Disable for Go 1.18.
The actual change is trivial: disable a branch through a flag.
The remaining changes are adjustments to tests.
Fixes#51576.
Change-Id: Ib77b038b846711a808315a8889b3904e72367bce
Reviewed-on: https://go-review.googlesource.com/c/go/+/391135
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
If you attempt to instantiate a generic type or func and run 'go build'
with a language version < 1.18 in the 'go' directive inside the go.mod
file, cmd/compile emits a friendly message that includes the suggestion
to 'check go.mod':
type instantiation requires go1.18 or later (-lang was set to go1.17; check go.mod)
However, if the code instead only declares a generic type or func
without instantiating, cmd/compile currently emits a less friendly
message:
type parameters require go1.18 or later
With this CL, the error in that situation becomes:
type parameter requires go1.18 or later (-lang was set to go1.17; check go.mod)
Within cmd/compile/internal/types2, it already calls check.versionErrorf
in a dozen or so places, including three existing calls to
check.versionErrorf within typeset.go (e.g., for embedding a constraint
interface).
This CL adds two more calls to check.versionErrorf, replacing calls to
check.softErrorf. Both check.versionErrorf and check.softErrorf call
check.err(at, <string>, true) after massaging the string message.
Fixes#51531
Change-Id: If54e179f5952b97701d1dfde4abb08101de07811
GitHub-Last-Rev: b0b7c1346f
GitHub-Pull-Request: golang/go#51536
Reviewed-on: https://go-review.googlesource.com/c/go/+/390578
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Findley <rfindley@google.com>
Inference for type instances has dependencies on type-checking order
that can lead to subtle bugs. As explained in #51527, disable it for
1.18.
Fixes#51527
Change-Id: I42795bad30ce53abecfc5a4914599ae5a2041a9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/387934
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Now that we always use types2 to validate user source code, we can
remove the constSet logic from typecheck for detecting duplicate
expression switch cases and duplicate map literal keys. This logic is
redundant with types2, and currently causes unified IR to report
inappropriate duplicate constant errors that only appear after type
substitution.
Updates #42758.
Change-Id: I51ee2c5106eec9abf40eba2480dc52603c68ba21
Reviewed-on: https://go-review.googlesource.com/c/go/+/390474
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The test case is already working with unified IR, so add it to make
sure we don't regress while finishing unified IR's support for
dictionaries.
Updates #51521.
Change-Id: Ib7c8bf9612d30cd552e8e631fd0d487dcb177f14
Reviewed-on: https://go-review.googlesource.com/c/go/+/390356
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
None of the current generic type switch test cases exercise type
switches where the instantiated case is an interface type.
Change-Id: I9272fa61b8dde1fe1a3702d524d4f40253ef19b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/390354
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This CL switches unified IR to using ir.DynamicType for derived
types. This has an immediate effect of fixing compilation of generic
code that when fully stenciled results in statically invalid type
assertions. This does require updating typecheck to expect
ODYNAMICTYPE in type switches, but this is straightforward to
implement.
For now, we still statically resolve the runtime type (or itab)
pointer. However, a subsequent CL will allow reading these pointers
from the runtime dictionary.
Change-Id: I1666678fcc588bc9cb8b97871bd02b9059848e6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/390336
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
We shouldn't need to read in function bodies for new functions found
during inlining, but something is expecting them to still be read
in. We should fix that code to not depend on them being read in, but
in the mean time reading them in anyway is at least correct, albeit
less efficient in time and space.
Fixes#49536.
Updates #50552.
Change-Id: I949ef45e7be09406e5a8149e251d78e015aca5fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/390335
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Also correct scope position for such variables.
Adjusted some comments.
Fixes#51437.
Change-Id: Ic49a1459469c8b2c7bc24fe546795f7d56c67cb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/389594
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This CL is a bit overkill, but it is pretty safe for 1.18. We'll
want to revisit for 1.19 so we can avoid the hash collisions between
types, e.g. G[int] and G[float64], that will cause some slowdowns
(but not incorrect behavior). Thanks Cherry for the simple idea.
Fixes#51250
Change-Id: I68130e09ba68e7cc35687bc623f63547bc552867
Reviewed-on: https://go-review.googlesource.com/c/go/+/389474
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When doing constraint type inference, we must consider whether the
constraint's core type is precise (no tilde) or imprecise (tilde,
or not a single specific type). In the latter case, we cannot infer
an unknown type argument from the (imprecise) core type because there
are infinitely many possible types. For instance, given
[E ~byte]
if we don't know E, we cannot infer that E must be byte (it could be
myByte, etc.). On the other hand, if we do know the type argument,
say for S in this example:
[S ~[]E, E any]
we must consider the underlying type of S when matching against ~[]E
because we have a tilde.
Because constraint type inference may infer type arguments that were
not eligible initially (because they were unknown and the core type
is imprecise), we must iterate the process until nothing changes any-
more. For instance, given
[S ~[]E, M ~map[string]S, E any]
where we initially only know the type argument for M, we must ignore
S (and E) at first. After one iteration of constraint type inference,
S is known at which point we can infer E as well.
The change is large-ish but the actual functional changes are small:
- There's a new method "unknowns" to determine the number of as of yet
unknown type arguments.
- The adjCoreType function has been adjusted to also return tilde
and single-type information. This is now conveniently returned
as (*term, bool), and the function has been renamed to coreTerm.
- The original constraint type inference loop has been adjusted to
consider tilde information.
- This adjusted original constraint type inference loop has been
nested in another loop for iteration, together with some minimal
logic to control termination.
The remaining changes are modifications to tests:
- There's a substantial new test for this issue.
- Several existing test cases were adjusted to accomodate the
fact that they inferred incorrect types: tildes have been
removed throughout. Most of these tests are for pathological
cases.
- A couple of tests were adjusted where there was a difference
between the go/types and types2 version.
Fixes#51229.
Change-Id: If0bf5fb70ec22913b5a2da89adbf8a27fbc921d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/387977
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Currently we only include static entries in the hint for sizing
the map when allocating a map for a map literal. Change that to
include all entries.
This will be an overallocation if the dynamic entries in the map have
equal keys, but equal keys in map literals are rare, and at worst we
waste a bit of space.
Fixes#43020
Change-Id: I232f82f15316bdf4ea6d657d25a0b094b77884ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/383634
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Keith Randall <khr@golang.org>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We use AutogeneratedPos for most compiler-generated functions. But
for method value wrappers we currently don't. Instead, we use the
Pos for their (direct) declaration if there is one, otherwise
not set it in methodValueWrapper, which will probably cause it to
inherit from the caller, i.e. the Pos of that method value
expression. If that Pos has inline information, it will cause the
method wrapper to have bogus inline information, which could lead
to infinite loop when printing a stack trace.
Change it to use AutogeneratedPos instead.
Fixes#51401.
Change-Id: I398dfe85f9f875e1fd82dc2f489dab63ada6570d
Reviewed-on: https://go-review.googlesource.com/c/go/+/388794
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test case is failing on the noopt builder, because it disables
inlining. Evidently the explicit -gcflags flag in all of our generics
tests was overriding the noopt builder's default mode.
This CL restores a noop -gcflags to get the builder green again until
the issue can be properly fixed.
Updates #51413.
Change-Id: I61d22a007105f756104ba690b73f1d68ce4be281
Reviewed-on: https://go-review.googlesource.com/c/go/+/388894
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The next CL will remove the -G flag, effectively hard-coding it to its
current default (-G=3).
Change-Id: Ib4743b529206928f9f1cca9fdb19989728327831
Reviewed-on: https://go-review.googlesource.com/c/go/+/388534
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We convert type args to shape types inside instantiations. If an
instantiation constructs a compound type based on that shape type and
uses that as a type arg to another generic function being called, then
we have a type arg with a shape type embedded inside of it. In that
case, we need to substitute out those embedded shape types with their
underlying type.
If we don't do this, we may create extra unneeded shape types that
have these other shape types embedded in them. This may lead to
generating extra shape instantiations, and a mismatch between the
instantiations that we used in generating dictionaries and the
instantations that are actually called.
Updates #51303
Change-Id: Ieef894a5fac176cfd1415f95926086277ad09759
Reviewed-on: https://go-review.googlesource.com/c/go/+/387674
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In getInstantiation, we were not computing tparams correctly for the
case where the receiver of a method was a fully-instantiated type. This
wasn't affecting later parts of the function, since method
instantiations of fully-instantiated types were already being calculated
in an earlier path. But it did give us a non-typeparam when trying to
see if a shape was associated with a type param with a structural type.
The fix is just to get the typeparams associated with the base generic
type. Then we can eliminate a conditional check later in the code.
The tparam parameter of Shapify should always be non-nil
Fixes#51367
Change-Id: I6f95fe603886148b2dad0c581416c51373c85009
Reviewed-on: https://go-review.googlesource.com/c/go/+/388116
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Normally types of constants are emitted when the type is defined (an
ODCLTYPE). However, the types of constants where the type is an
instantiated generic type made inside the constant declaration, do not
normally get emitted. But the DWARF processor in the linker wants
to see those types. So we emit them during stenciling.
Fixes#51245
Change-Id: I59f20f1d7b91501c9ac760cf839a354356331fc6
Reviewed-on: https://go-review.googlesource.com/c/go/+/388117
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The existing test for 51219 didn't actually trigger the types2 issue - I
hadn't been able to minimize the test case yet properly. This new test
case issue51219b.go now does trigger the types2 issue (it's only
slightly different).
Updates #51219
Change-Id: Iaba8144b4702ff4fefec86c899b8acef127b10dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/387814
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
The problem in 51355 is that escape analysis decided that the
dictionary variable was captured by reference instead of by value. We
want dictionaries to always be captured by value.
Escape analysis was confused because it saw what it thought was a
reassignment of the dictionary variable. In fact, it was the only
assignment, it just wasn't marked as the defining assignment. Fix
that.
Add an assert to make sure this stays true.
Fixes#51355
Change-Id: Ifd9342455fa107b113f5ff521a94cdbf1b8a7733
Reviewed-on: https://go-review.googlesource.com/c/go/+/388115
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Delay validation of receiver type as it may cause premature expansion
of types the receiver type is dependent on. This was actually a TODO.
While the diff looks large-ish, the actual change is small: all the
receiver validation code has been moved inside the delayed function
body, and a couple of comments have been adjusted.
Fixes#51232.
Fixes#51233.
Change-Id: I44edf0ba615996266791724b832d81b9ccb8b435
Reviewed-on: https://go-review.googlesource.com/c/go/+/387918
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We changed to delaying all transforms of generic functions, since there
are so many complicated situations where type params can be used. We
missed changing so that all Call expressions(not just some) are delayed
if in a generic function. This changes to delaying all transforms on
calls in generic functions. Had to convert Call() to g.callExpr() (so we
can access g.delayTransform()). By always delaying transforms on calls
in generic functions, we actually simplify the code a bit both in
g.CallExpr() and stencil.go.
Fixes#51236
Change-Id: I0342c7995254082c4baf709b0b92a06ec14425e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/386220
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
