This CL adds intrinsics for the 64-bit addition and subtraction
functions in math/bits. These intrinsics use the condition code
to propagate the carry or borrow bit.
To make the carry chains more efficient I've removed the
'clobberFlags' property from most of the load and store
operations. Originally these ops did clobber flags when using
offsets that didn't fit in a signed 20-bit integer, however
that is no longer true.
As with other platforms the intrinsics are faster when executed
in a chain rather than a loop because currently we need to spill
and restore the carry bit between each loop iteration. We may
be able to reduce the need to do this on s390x (e.g. by using
compare-and-branch instructions that do not clobber flags) in the
future.
name old time/op new time/op delta
Add64 1.21ns ± 2% 2.03ns ± 2% +67.18% (p=0.000 n=7+10)
Add64multiple 2.98ns ± 3% 1.03ns ± 0% -65.39% (p=0.000 n=10+9)
Sub64 1.23ns ± 4% 2.03ns ± 1% +64.85% (p=0.000 n=10+10)
Sub64multiple 3.73ns ± 4% 1.04ns ± 1% -72.28% (p=0.000 n=10+8)
Change-Id: I913bbd5e19e6b95bef52f5bc4f14d6fe40119083
Reviewed-on: https://go-review.googlesource.com/c/go/+/174303
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This enables more of the testcases in memcombine for ppc64le,
and adds more detail to some existing.
Change-Id: Ic522a1175bed682b546909c96f9ea758f8db247c
Reviewed-on: https://go-review.googlesource.com/c/go/+/174737
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
"Division by invariant integers using multiplication" paper
by Granlund and Montgomery contains a method for directly computing
divisibility (x%c == 0 for c constant) by means of the modular inverse.
The method is further elaborated in "Hacker's Delight" by Warren Section 10-17
This general rule can compute divisibilty by one multiplication, and add
and a compare for odd divisors and an additional rotate for even divisors.
To apply the divisibility rule, we must take into account
the rules to rewrite x%c = x-((x/c)*c) and (x/c) for c constant on the first
optimization pass "opt". This complicates the matching as we want to match
only in the cases where the result of (x/c) is not also needed.
So, we must match on the expanded form of (x/c) in the expression x == c*(x/c)
in the "late opt" pass after common subexpresion elimination.
Note, that if there is an intermediate opt pass introduced in the future we
could simplify these rules by delaying the magic division rewrite to "late opt"
and matching directly on (x/c) in the intermediate opt pass.
On amd64, the divisibility check is 30-45% faster.
name old time/op new time/op delta`
DivisiblePow2constI64-4 0.83ns ± 1% 0.82ns ± 0% ~ (p=0.079 n=5+4)
DivisibleconstI64-4 2.68ns ± 1% 1.87ns ± 0% -30.33% (p=0.000 n=5+4)
DivisibleWDivconstI64-4 2.69ns ± 1% 2.71ns ± 3% ~ (p=1.000 n=5+5)
DivisiblePow2constI32-4 1.15ns ± 1% 1.15ns ± 0% ~ (p=0.238 n=5+4)
DivisibleconstI32-4 2.24ns ± 1% 1.20ns ± 0% -46.48% (p=0.016 n=5+4)
DivisibleWDivconstI32-4 2.27ns ± 1% 2.27ns ± 1% ~ (p=0.683 n=5+5)
DivisiblePow2constI16-4 0.81ns ± 1% 0.82ns ± 1% ~ (p=0.135 n=5+5)
DivisibleconstI16-4 2.11ns ± 2% 1.20ns ± 1% -42.99% (p=0.008 n=5+5)
DivisibleWDivconstI16-4 2.23ns ± 0% 2.27ns ± 2% +1.79% (p=0.029 n=4+4)
DivisiblePow2constI8-4 0.81ns ± 1% 0.81ns ± 1% ~ (p=0.286 n=5+5)
DivisibleconstI8-4 2.13ns ± 3% 1.19ns ± 1% -43.84% (p=0.008 n=5+5)
DivisibleWDivconstI8-4 2.23ns ± 1% 2.25ns ± 1% ~ (p=0.183 n=5+5)
Fixes#30282Fixes#15806
Change-Id: Id20d78263a4fdfe0509229ae4dfa2fede83fc1d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/173998
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change creates an intrinsic for Add64 for ppc64x and adds a
testcase for it.
name old time/op new time/op delta
Add64-160 1.90ns ±40% 2.29ns ± 0% ~ (p=0.119 n=5+5)
Add64multiple-160 6.69ns ± 2% 2.45ns ± 4% -63.47% (p=0.016 n=4+5)
Change-Id: I9abe6fb023fdf62eea3c9b46a1820f60bb0a7f97
Reviewed-on: https://go-review.googlesource.com/c/go/+/173758
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
"Division by invariant integers using multiplication" paper
by Granlund and Montgomery contains a method for directly computing
divisibility (x%c == 0 for c constant) by means of the modular inverse.
The method is further elaborated in "Hacker's Delight" by Warren Section 10-17
This general rule can compute divisibilty by one multiplication and a compare
for odd divisors and an additional rotate for even divisors.
To apply the divisibility rule, we must take into account
the rules to rewrite x%c = x-((x/c)*c) and (x/c) for c constant on the first
optimization pass "opt". This complicates the matching as we want to match
only in the cases where the result of (x/c) is not also available.
So, we must match on the expanded form of (x/c) in the expression x == c*(x/c)
in the "late opt" pass after common subexpresion elimination.
Note, that if there is an intermediate opt pass introduced in the future we
could simplify these rules by delaying the magic division rewrite to "late opt"
and matching directly on (x/c) in the intermediate opt pass.
Additional rules to lower the generic RotateLeft* ops were also applied.
On amd64, the divisibility check is 25-50% faster.
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.08ns ± 1% ~ (p=0.881 n=5+5)
DivisibleconstI64-4 2.67ns ± 0% 2.67ns ± 1% ~ (p=1.000 n=5+5)
DivisibleWDivconstI64-4 2.67ns ± 0% 2.67ns ± 0% ~ (p=0.683 n=5+5)
DivconstU64-4 2.08ns ± 1% 2.08ns ± 1% ~ (p=1.000 n=5+5)
DivisibleconstU64-4 2.77ns ± 1% 1.55ns ± 2% -43.90% (p=0.008 n=5+5)
DivisibleWDivconstU64-4 2.99ns ± 1% 2.99ns ± 1% ~ (p=1.000 n=5+5)
DivconstI32-4 1.53ns ± 2% 1.53ns ± 0% ~ (p=1.000 n=5+5)
DivisibleconstI32-4 2.23ns ± 0% 2.25ns ± 3% ~ (p=0.167 n=5+5)
DivisibleWDivconstI32-4 2.27ns ± 1% 2.27ns ± 1% ~ (p=0.429 n=5+5)
DivconstU32-4 1.78ns ± 0% 1.78ns ± 1% ~ (p=1.000 n=4+5)
DivisibleconstU32-4 2.52ns ± 2% 1.26ns ± 0% -49.96% (p=0.000 n=5+4)
DivisibleWDivconstU32-4 2.63ns ± 0% 2.85ns ±10% +8.29% (p=0.016 n=4+5)
DivconstI16-4 1.54ns ± 0% 1.54ns ± 0% ~ (p=0.333 n=4+5)
DivisibleconstI16-4 2.10ns ± 0% 2.10ns ± 1% ~ (p=0.571 n=4+5)
DivisibleWDivconstI16-4 2.22ns ± 0% 2.23ns ± 1% ~ (p=0.556 n=4+5)
DivconstU16-4 1.09ns ± 0% 1.01ns ± 1% -7.74% (p=0.000 n=4+5)
DivisibleconstU16-4 1.83ns ± 0% 1.26ns ± 0% -31.52% (p=0.008 n=5+5)
DivisibleWDivconstU16-4 1.88ns ± 0% 1.89ns ± 1% ~ (p=0.365 n=5+5)
DivconstI8-4 1.54ns ± 1% 1.54ns ± 1% ~ (p=1.000 n=5+5)
DivisibleconstI8-4 2.10ns ± 0% 2.11ns ± 0% ~ (p=0.238 n=5+4)
DivisibleWDivconstI8-4 2.22ns ± 0% 2.23ns ± 2% ~ (p=0.762 n=5+5)
DivconstU8-4 0.92ns ± 1% 0.94ns ± 1% +2.65% (p=0.008 n=5+5)
DivisibleconstU8-4 1.66ns ± 0% 1.26ns ± 1% -24.28% (p=0.008 n=5+5)
DivisibleWDivconstU8-4 1.79ns ± 0% 1.80ns ± 1% ~ (p=0.079 n=4+5)
A follow-up change will address the signed division case.
Updates #30282
Change-Id: I7e995f167179aa5c76bb10fbcbeb49c520943403
Reviewed-on: https://go-review.googlesource.com/c/go/+/168037
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For powers of two (c=1<<k), the divisibility check x%c == 0 can be made
just by checking the trailing zeroes via a mask x&(c-1) == 0 even for signed
integers. This avoids division fix-ups when just divisibility check is needed.
To apply this rule, we match on the fixed-up version of the division. This is
neccessary because the mod and division rewrite rules are already applied
during the initial opt pass.
The speed up on amd64 due to elimination of unneccessary fix-up code is ~55%:
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.09ns ± 1% ~ (p=0.730 n=5+5)
DivisiblePow2constI64-4 1.78ns ± 1% 0.81ns ± 1% -54.66% (p=0.008 n=5+5)
DivconstU64-4 2.08ns ± 0% 2.08ns ± 0% ~ (p=0.683 n=5+5)
DivconstI32-4 1.53ns ± 0% 1.53ns ± 1% ~ (p=0.968 n=4+5)
DivisiblePow2constI32-4 1.79ns ± 1% 0.81ns ± 1% -54.97% (p=0.008 n=5+5)
DivconstU32-4 1.78ns ± 1% 1.80ns ± 2% ~ (p=0.206 n=5+5)
DivconstI16-4 1.54ns ± 2% 1.54ns ± 0% ~ (p=0.238 n=5+4)
DivisiblePow2constI16-4 1.78ns ± 0% 0.81ns ± 1% -54.72% (p=0.000 n=4+5)
DivconstU16-4 1.00ns ± 5% 1.01ns ± 1% ~ (p=0.119 n=5+5)
DivconstI8-4 1.54ns ± 0% 1.54ns ± 2% ~ (p=0.571 n=4+5)
DivisiblePow2constI8-4 1.78ns ± 0% 0.82ns ± 8% -53.71% (p=0.008 n=5+5)
DivconstU8-4 0.93ns ± 1% 0.93ns ± 1% ~ (p=0.643 n=5+5)
A follow-up CL will address the general case of x%c == 0 for signed integers.
Updates #15806
Change-Id: Iabadbbe369b6e0998c8ce85d038ebc236142e42a
Reviewed-on: https://go-review.googlesource.com/c/go/+/173557
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This reverts CL 168038 (git 68819fb6d2)
Reason for revert: Doesn't work on 32 bit archs.
Change-Id: Idec9098060dc65bc2f774c5383f0477f8eb63a3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/173442
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For powers of two (c=1<<k), the divisibility check x%c == 0 can be made
just by checking the trailing zeroes via a mask x&(c-1)==0 even for signed
integers. This avoids division fixups when just divisibility check is needed.
To apply this rule the generic divisibility rule for A%B = A-(A/B*B) is disabled
on the "opt" pass, but this does not affect generated code as this rule is applied
later.
The speed up on amd64 due to elimination of unneccessary fixup code is ~55%:
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.07ns ± 0% ~ (p=0.079 n=5+5)
DivisiblePow2constI64-4 1.78ns ± 1% 0.81ns ± 1% -54.55% (p=0.008 n=5+5)
DivconstU64-4 2.08ns ± 0% 2.08ns ± 0% ~ (p=1.000 n=5+5)
DivconstI32-4 1.53ns ± 0% 1.53ns ± 0% ~ (all equal)
DivisiblePow2constI32-4 1.79ns ± 1% 0.81ns ± 4% -54.75% (p=0.008 n=5+5)
DivconstU32-4 1.78ns ± 1% 1.78ns ± 1% ~ (p=1.000 n=5+5)
DivconstI16-4 1.54ns ± 2% 1.53ns ± 0% ~ (p=0.333 n=5+4)
DivisiblePow2constI16-4 1.78ns ± 0% 0.79ns ± 1% -55.39% (p=0.000 n=4+5)
DivconstU16-4 1.00ns ± 5% 0.99ns ± 1% ~ (p=0.730 n=5+5)
DivconstI8-4 1.54ns ± 0% 1.53ns ± 0% ~ (p=0.714 n=4+5)
DivisiblePow2constI8-4 1.78ns ± 0% 0.80ns ± 0% -55.06% (p=0.000 n=5+4)
DivconstU8-4 0.93ns ± 1% 0.95ns ± 1% +1.72% (p=0.024 n=5+5)
A follow-up CL will address the general case of x%c == 0 for signed integers.
Updates #15806
Change-Id: I0d284863774b1bc8c4ce87443bbaec6103e14ef4
Reviewed-on: https://go-review.googlesource.com/c/go/+/168038
Reviewed-by: Keith Randall <khr@golang.org>
In 31618, we end up comparing the is-stmt-ness of positions
to repurpose real instructions as inline marks. If the is-stmt-ness
doesn't match, we end up not being able to remove the inline mark.
Always use statement-full positions to do the matching, so we
always find a match if there is one.
Also always use positions that are statements for inline marks.
Fixes#31618
Change-Id: Idaf39bdb32fa45238d5cd52973cadf4504f947d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/173324
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
These new calls should not prevent NOSPLIT promotion, like the old ones.
These new calls should not prevent racefuncenter/exit removal.
(The latter was already true, as the new calls are not yet lowered
to StaticCalls at the point where racefuncenter/exit removal is done.)
Add tests to make sure we don't regress (again).
Fixes#31219
Change-Id: I3fb6b17cdd32c425829f1e2498defa813a5a9ace
Reviewed-on: https://go-review.googlesource.com/c/go/+/170639
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
This CL instrinsifies Add64 with arm64 instruction sequence ADDS, ADCS
and ADC, and optimzes the case of carry chains.The CL also changes the
test code so that the intrinsic implementation can be tested.
Benchmarks:
name old time/op new time/op delta
Add-224 2.500000ns +- 0% 2.090000ns +- 4% -16.40% (p=0.000 n=9+10)
Add32-224 2.500000ns +- 0% 2.500000ns +- 0% ~ (all equal)
Add64-224 2.500000ns +- 0% 1.577778ns +- 2% -36.89% (p=0.000 n=10+9)
Add64multiple-224 6.000000ns +- 0% 2.000000ns +- 0% -66.67% (p=0.000 n=10+10)
Change-Id: I6ee91c9a85c16cc72ade5fd94868c579f16c7615
Reviewed-on: https://go-review.googlesource.com/c/go/+/159017
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
'SUBQ $-0x80, r' is shorter to encode than 'ADDQ $0x80, r',
and functionally equivalent. Use it instead.
Shaves off a few bytes here and there:
file before after Δ %
compile 25935856 25927664 -8192 -0.032%
nm 4251840 4247744 -4096 -0.096%
Change-Id: Ia9e02ea38cbded6a52a613b92e3a914f878d931e
Reviewed-on: https://go-review.googlesource.com/c/go/+/168344
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A few examples (for accessing a slice of length 3):
s[-1] runtime error: index out of range [-1]
s[3] runtime error: index out of range [3] with length 3
s[-1:0] runtime error: slice bounds out of range [-1:]
s[3:0] runtime error: slice bounds out of range [3:0]
s[3:-1] runtime error: slice bounds out of range [:-1]
s[3:4] runtime error: slice bounds out of range [:4] with capacity 3
s[0:3:4] runtime error: slice bounds out of range [::4] with capacity 3
Note that in cases where there are multiple things wrong with the
indexes (e.g. s[3:-1]), we report one of those errors kind of
arbitrarily, currently the rightmost one.
An exhaustive set of examples is in issue30116[u].out in the CL.
The message text has the same prefix as the old message text. That
leads to slightly awkward phrasing but hopefully minimizes the chance
that code depending on the error text will break.
Increases the size of the go binary by 0.5% (amd64). The panic functions
take arguments in registers in order to keep the size of the compiled code
as small as possible.
Fixes#30116
Change-Id: Idb99a827b7888822ca34c240eca87b7e44a04fdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/161477
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We know that a & 31 is non-negative for all a, signed or not.
We can avoid checking that and needing to write out an
unreachable call to panicshift.
Change-Id: I32f32fb2c950d2b2b35ac5c0e99b7b2dbd47f917
Reviewed-on: https://go-review.googlesource.com/c/go/+/167499
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Two tests (load_le_byte8_uint64_inv and load_be_byte8_uint64)
pass but the generated code isn't actually correct.
The test regexp provides a false negative, as it matches the
MOVQ (SP), BP instruction in the epilogue.
Combined loads never worked for these cases - the test was added in error
as part of a batch and not noticed because of the above false match.
Normalize the amd64/386 tests to always negative match on narrower
loads and OR.
Change-Id: I256861924774d39db0e65723866c81df5ab5076f
Reviewed-on: https://go-review.googlesource.com/c/go/+/166837
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Current compiler reverses operands to work around NaN in
"less than" and "less equal than" comparisons. But if we
want to use "FCMPD/FCMPS $(0.0), Fn" to do some optimization,
the workaround way does not work. Because assembler does
not support instruction "FCMPD/FCMPS Fn, $(0.0)".
This CL sets condition flags for floating-point comparisons
to resolve this problem.
Change-Id: Ia48076a1da95da64596d6e68304018cb301ebe33
Reviewed-on: https://go-review.googlesource.com/c/go/+/164718
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL adds two rules to turn patterns like ((x<<8) | (x>>8)) (the type of
x is uint16, "|" can also be "+" or "^") to a REV16 instruction on arm v6+.
This optimization rule can be used for math/bits.ReverseBytes16.
Benchmarks on arm v6:
name old time/op new time/op delta
ReverseBytes-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes16-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes32-32 1.29ns ± 0% 1.29ns ± 0% ~ (all equal)
ReverseBytes64-32 1.43ns ± 0% 1.43ns ± 0% ~ (all equal)
Change-Id: I819e633c9a9d308f8e476fb0c82d73fb73dd019f
Reviewed-on: https://go-review.googlesource.com/c/go/+/159019
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Emit &runtime.zerobase instead of a call to newobject for
allocations of zero sized objects in walk.go.
Fixes#29446
Change-Id: I11b67981d55009726a17c2e582c12ce0c258682e
Reviewed-on: https://go-review.googlesource.com/c/155840
Run-TryBot: Iskander Sharipov <quasilyte@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
var a []int = ...
p := &a[0]
_ = *p
We don't need to nil check on the 3rd line. If the bounds check on the 2nd
line passes, we know p is non-nil.
We rely on the fact that any cap>0 slice has a non-nil pointer as its
pointer to the backing array. This is true for all safely-constructed slices,
and I don't see any reason why someone would violate this rule using unsafe.
R=go1.13
Fixes#30366
Change-Id: I3ed764fcb72cfe1fbf963d8c1a82e24e3b6dead7
Reviewed-on: https://go-review.googlesource.com/c/163740
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
If someone takes a pointer to a zero-sized stack variable, it can
be incorrectly interpreted as a pointer to the next object in the
stack frame. To avoid this, add some padding after zero-sized variables.
We only need to pad if the next variable in memory (which is the
previous variable in the order in which we allocate variables to the
stack frame) has pointers. If the next variable has no pointers, it
won't hurt to have a pointer to it.
Because we allocate all pointer-containing variables before all
non-pointer-containing variables, we should only have to pad once per
frame.
Fixes#24993
Change-Id: Ife561cdfdf964fdbf69af03ae6ba97d004e6193c
Reviewed-on: https://go-review.googlesource.com/c/155698
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL adds several test cases of arithmetic operations for
386/amd64/arm/arm64.
Change-Id: I362687c06249f31091458a1d8c45fc4d006b616a
Reviewed-on: https://go-review.googlesource.com/c/151897
Run-TryBot: Ben Shi <powerman1st@163.com>
Reviewed-by: Keith Randall <khr@golang.org>
We want to issue loads as soon as possible, especially when they
are going to miss in the cache. Using a conditional move (CMOV) here:
i := ...
if cond {
i++
}
... = a[i]
means that we have to wait for cond to be computed before the load
is issued. Without a CMOV, if the branch is predicted correctly the
load can be issued in parallel with computing cond.
Even if the branch is predicted incorrectly, maybe the speculative
load is close to the real load, and we get a prefetch for free.
In the worst case, when the prediction is wrong and the address is
way off, we only lose by the time difference between the CMOV
latency (~2 cycles) and the mispredict restart latency (~15 cycles).
We only squash CMOVs that affect load addresses. Results of CMOVs
that are used for other things (store addresses, store values) we
use as before.
Fixes#26306
Change-Id: I82ca14b664bf05e1d45e58de8c4d9c775a127ca1
Reviewed-on: https://go-review.googlesource.com/c/145717
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Note that the intrinsic implementation panics separately for overflow and
divide by zero, which matches the behavior of the pure go implementation.
There is a modest performance improvement after intrinsic implementation.
name old time/op new time/op delta
Div-4 53.0ns ± 1% 47.0ns ± 0% -11.28% (p=0.008 n=5+5)
Div32-4 18.4ns ± 0% 18.5ns ± 1% ~ (p=0.444 n=5+5)
Div64-4 53.3ns ± 0% 47.5ns ± 4% -10.77% (p=0.008 n=5+5)
Updates #28273
Change-Id: Ic1688ecc0964acace2e91bf44ef16f5fb6b6bc82
Reviewed-on: https://go-review.googlesource.com/c/144378
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The current support_XXX variables are specific for the
amd64 and 386 platforms.
Prefix processor capability variables by architecture to have a
consistent naming scheme and avoid reuse of the existing
variables for new platforms.
This also aligns naming of runtime variables closer with internal/cpu
processor capability variable names.
Change-Id: I3eabb29a03874678851376185d3a62e73c1aff1d
Reviewed-on: https://go-review.googlesource.com/c/91435
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change makes use of the cc versions of the AND, OR, XOR
instructions, omitting the need for a CMP instruction.
In many test programs and in the go binary, this reduces the
size of 20-30 functions by at least 1 instruction, many in
runtime.
Testcase added to test/codegen/comparisons.go
Change-Id: I6cc1ca8b80b065d7390749c625bc9784b0039adb
Reviewed-on: https://go-review.googlesource.com/c/143059
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For moves >8,<16 bytes, do a move using non-overlapping loads/stores
if it would require no more instructions.
This helps a bit with the case when the move is from a static
constant, because then the code to materialize the value being moved
is smaller.
Change-Id: Ie47a5a7c654afeb4973142b0a9922faea13c9b54
Reviewed-on: https://go-review.googlesource.com/c/146019
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL fixes several typos and adds two more cases
to arithmetic test.
Change-Id: I086560162ea351e2166866e444e2317da36c1729
Reviewed-on: https://go-review.googlesource.com/c/145210
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Unlike normal load+op opcodes, the load+compare opcode does
not clobber its non-load argument. Allow the load+compare merge
to happen even if the non-load argument is used elsewhere.
Noticed when investigating issue #28417.
Change-Id: Ibc48d1f2e06ae76034c59f453815d263e8ec7288
Reviewed-on: https://go-review.googlesource.com/c/145097
Reviewed-by: Ainar Garipov <gugl.zadolbal@gmail.com>
Reviewed-by: Ben Shi <powerman1st@163.com>
prove is able to find 94 occurrences in std cmd where a divisor
can't have the value -1. The change removes
the extraneous fix-up code for these cases.
Fixes#25239
Change-Id: Ic184de971f47cc57c702eb72805b8e291c14035d
Reviewed-on: https://go-review.googlesource.com/c/130215
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL add 3 rules to combine byte-store to word-store on386 and
amd64.
Change-Id: Iffd9cda42f1961680c81def4edc773ad58f211b3
Reviewed-on: https://go-review.googlesource.com/c/143057
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL adds more combined load/store test cases for 386/amd64.
Change-Id: I0a483a6ed0212b65c5e84d67ed8c9f50c389ce2d
Reviewed-on: https://go-review.googlesource.com/c/142878
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
ARMv7's MULAF/MULSF/MULAD/MULSD are not fused,
this CL fixes the confusing test cases.
Change-Id: I35022e207e2f0d24a23a7f6f188e41ba8eee9886
Reviewed-on: https://go-review.googlesource.com/c/142439
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Akhil Indurti <aindurti@gmail.com>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
x = map[string(byteslice)] is already optimized by the compiler to avoid a
string allocation. This CL generalizes this optimization to:
x = map[T1{ ... Tn{..., string(byteslice), ...} ... }]
where T1 to Tn is a nesting of struct and array literals.
Found in a hot code path that used a struct of strings made from []byte
slices to make a map lookup.
There are no uses of the more generalized optimization in the standard library.
Passes toolstash -cmp.
MapStringConversion/32/simple 21.9ns ± 2% 21.9ns ± 3% ~ (p=0.995 n=17+20)
MapStringConversion/32/struct 28.8ns ± 3% 22.0ns ± 2% -23.80% (p=0.000 n=20+20)
MapStringConversion/32/array 28.5ns ± 2% 21.9ns ± 2% -23.14% (p=0.000 n=19+16)
MapStringConversion/64/simple 21.0ns ± 2% 21.1ns ± 3% ~ (p=0.072 n=19+18)
MapStringConversion/64/struct 72.4ns ± 3% 21.3ns ± 2% -70.53% (p=0.000 n=20+20)
MapStringConversion/64/array 72.8ns ± 1% 21.0ns ± 2% -71.13% (p=0.000 n=17+19)
name old allocs/op new allocs/op delta
MapStringConversion/32/simple 0.00 0.00 ~ (all equal)
MapStringConversion/32/struct 0.00 0.00 ~ (all equal)
MapStringConversion/32/array 0.00 0.00 ~ (all equal)
MapStringConversion/64/simple 0.00 0.00 ~ (all equal)
MapStringConversion/64/struct 1.00 ± 0% 0.00 -100.00% (p=0.000 n=20+20)
MapStringConversion/64/array 1.00 ± 0% 0.00 -100.00% (p=0.000 n=20+20)
Change-Id: I483b4d84d8d74b1025b62c954da9a365e79b7a3a
Reviewed-on: https://go-review.googlesource.com/c/116275
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds codegen tests for the intrinsification on ppc64 of
the OnesCount{64,32,16,8}, and TrailingZeros{64,32,16,8} math/bits
functions.
Change-Id: Id3364921fbd18316850e15c8c71330c906187fdb
Reviewed-on: https://go-review.googlesource.com/c/141897
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
