This CL optimizes RotateLeft8/16 on arm64.
For 16 bits, we form a 32 bits register by duplicating two 16 bits
registers, then use RORW instruction to do the rotate shift.
For 8 bits, we just use LSR and LSL instead of RORW because the code is
simpler.
Benchmark Old ThisCL delta
RotateLeft8-46 2.16 ns/op 1.73 ns/op -19.70%
RotateLeft16-46 2.16 ns/op 1.54 ns/op -28.53%
Change-Id: I09cde4383d12e31876a57f8cdfd3bb4f324fadb0
Reviewed-on: https://go-review.googlesource.com/c/go/+/420976
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
This is a follow up of CL 425101 on RISCV64.
According to RISCV Volume 1, Unprivileged Spec v. 20191213 Chapter 7.1:
If both the high and low bits of the same product are required, then the
recommended code sequence is: MULH[[S]U] rdh, rs1, rs2; MUL rdl, rs1, rs2
(source register specifiers must be in same order and rdh cannot be the
same as rs1 or rs2). Microarchitectures can then fuse these into a single
multiply operation instead of performing two separate multiplies.
So we should not split Muluhilo to separate instructions.
Updates #54607
Change-Id: If47461f3aaaf00e27cd583a9990e144fb8bcdb17
Reviewed-on: https://go-review.googlesource.com/c/go/+/425203
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
On ARM64 we use two separate instructions to compute the hi and lo
results of a 64x64->128 multiplication. Lower to two separate ops
so if only one result is needed we can deadcode the other.
Fixes#54607.
Change-Id: Ib023e77eb2b2b0bcf467b45471cb8a294bce6f90
Reviewed-on: https://go-review.googlesource.com/c/go/+/425101
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Updated multiple tests in test/codegen: math.go, mathbits.go, shift.go
and slices.go to verify on ppc64/ppc64le as well
Change-Id: Id88dd41569b7097819fb4d451b615f69cf7f7a94
Reviewed-on: https://go-review.googlesource.com/c/go/+/412115
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
math/bits.Add64 and math/bits.Sub64 now lower and optimize
directly in SSA form.
The optimization of carry chains focuses around eliding
XER<->GPR transfers of the CA bit when used exclusively as an
input to a single carry operations, or when the CA value is
known.
This also adds support for handling XER spills in the assembler
which could happen if carry chains contain inter-dependencies
on each other (which seems very unlikely with practical usage),
or a clobber happens (SRAW/SRAD/SUBFC operations clobber CA).
With PPC64 Add64/Sub64 lowering into SSA and this patch, the net
performance difference in crypto/elliptic benchmarks on P9/ppc64le
are:
name old time/op new time/op delta
ScalarBaseMult/P256 46.3µs ± 0% 46.9µs ± 0% +1.34%
ScalarBaseMult/P224 356µs ± 0% 209µs ± 0% -41.14%
ScalarBaseMult/P384 1.20ms ± 0% 0.57ms ± 0% -52.14%
ScalarBaseMult/P521 3.38ms ± 0% 1.44ms ± 0% -57.27%
ScalarMult/P256 199µs ± 0% 199µs ± 0% -0.17%
ScalarMult/P224 357µs ± 0% 212µs ± 0% -40.56%
ScalarMult/P384 1.20ms ± 0% 0.58ms ± 0% -51.86%
ScalarMult/P521 3.37ms ± 0% 1.44ms ± 0% -57.32%
MarshalUnmarshal/P256/Uncompressed 2.59µs ± 0% 2.52µs ± 0% -2.63%
MarshalUnmarshal/P256/Compressed 2.58µs ± 0% 2.52µs ± 0% -2.06%
MarshalUnmarshal/P224/Uncompressed 1.54µs ± 0% 1.40µs ± 0% -9.42%
MarshalUnmarshal/P224/Compressed 1.54µs ± 0% 1.39µs ± 0% -9.87%
MarshalUnmarshal/P384/Uncompressed 2.40µs ± 0% 1.80µs ± 0% -24.93%
MarshalUnmarshal/P384/Compressed 2.35µs ± 0% 1.81µs ± 0% -23.03%
MarshalUnmarshal/P521/Uncompressed 3.79µs ± 0% 2.58µs ± 0% -31.81%
MarshalUnmarshal/P521/Compressed 3.80µs ± 0% 2.60µs ± 0% -31.67%
Note, P256 uses an asm implementation, thus, little variation is expected.
Change-Id: I88a24f6bf0f4f285c649e40243b1ab69cc452b71
Reviewed-on: https://go-review.googlesource.com/c/go/+/346870
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
LZCNT is similar to BSR, but BSR(x) is undefined when x == 0, so using
LZCNT can avoid a special case for zero input. Except that case,
LZCNTQ(x) == 63-BSRQ(x) and LZCNTL(x) == 31-BSRL(x).
And according to https://www.agner.org/optimize/instruction_tables.pdf,
LZCNT instructions are much faster than BSR on AMD CPU.
name old time/op new time/op delta
LeadingZeros-8 0.91ns ± 1% 0.80ns ± 7% -11.68% (p=0.000 n=9+9)
LeadingZeros8-8 0.98ns ±15% 0.91ns ± 1% -7.34% (p=0.000 n=9+9)
LeadingZeros16-8 0.94ns ± 3% 0.92ns ± 2% -2.36% (p=0.001 n=10+10)
LeadingZeros32-8 0.89ns ± 1% 0.78ns ± 2% -12.49% (p=0.000 n=10+10)
LeadingZeros64-8 0.92ns ± 1% 0.78ns ± 1% -14.48% (p=0.000 n=10+10)
Change-Id: I125147fe3d6994a4cfe558432780408e9a27557a
Reviewed-on: https://go-review.googlesource.com/c/go/+/396794
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
It was noticed through some other investigation that BitLen32
was not generating the best code and found that it wasn't recognized
as an intrinsic. This corrects that and enables the test for PPC64.
Change-Id: Iab496a8830c8552f507b7292649b1b660f3848b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/355872
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
In case of amd64 the compiler issues checks if extensions are
available on a platform. With GOAMD64 microarchitecture levels
provided, some of the checks could be eliminated.
Change-Id: If15c178bcae273b2ce7d3673415cb8849292e087
Reviewed-on: https://go-review.googlesource.com/c/go/+/352010
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes this failure:
go test cmd/compile/internal/ssa -run TestStmtLines -v
=== RUN TestStmtLines
stmtlines_test.go:115: Saw too many (amd64, > 1%) lines without
statement marks, total=88263, nostmt=1930
('-run TestStmtLines -v' lists failing lines)
The failure has two causes.
One is that the first-line adjuster in code generation was relocating
"first lines" to instructions that would either not have any code generated,
or would have the statment marker removed by a different believed-good heuristic.
The other was that statement boundaries were getting attached to register
values (that with the old ABI were loads from the stack, hence real instructions).
The register values disappear at code generation.
The fixes are to (1) note that certain instructions are not good choices for
"first value" and skip them, and (2) in an expandCalls post-pass, look for
register valued instructions and under appropriate conditions move their
statement marker to a compatible use.
Also updates TestStmtLines to always log the score, for easier comparison of
minor compiler changes.
Updates #40724.
Change-Id: I485573ce900e292d7c44574adb7629cdb4695c3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/309649
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Optimize combinations of left and right shifts by a constant value
into a 'rotate then insert selected bits [into zero]' instruction.
Use the same instruction for contiguous masks since it has some
benefits over 'and immediate' (not restricted to 32-bits, does not
overwrite source register).
To keep the complexity of this change under control I've only
implemented 64 bit operations for now.
There are a lot more optimizations that can be done with this
instruction family. However, since their function overlaps with other
instructions we need to be somewhat careful not to break existing
optimization rules by creating optimization dead ends. This is
particularly true of the load/store merging rules which contain lots
of zero extensions and shifts.
This CL does interfere with the store merging rules when an operand
is shifted left before it is stored:
binary.BigEndian.PutUint64(b, x << 1)
This is unfortunate but it's not critical and somewhat complex so
I plan to fix that in a follow up CL.
file before after Δ %
addr2line 4117446 4117282 -164 -0.004%
api 4945184 4942752 -2432 -0.049%
asm 4998079 4991891 -6188 -0.124%
buildid 2685158 2684074 -1084 -0.040%
cgo 4553732 4553394 -338 -0.007%
compile 19294446 19245070 -49376 -0.256%
cover 4897105 4891319 -5786 -0.118%
dist 3544389 3542785 -1604 -0.045%
doc 3926795 3927617 +822 +0.021%
fix 3302958 3293868 -9090 -0.275%
link 6546274 6543456 -2818 -0.043%
nm 4102021 4100825 -1196 -0.029%
objdump 4542431 4548483 +6052 +0.133%
pack 2482465 2416389 -66076 -2.662%
pprof 13366541 13363915 -2626 -0.020%
test2json 2829007 2761515 -67492 -2.386%
trace 10216164 10219684 +3520 +0.034%
vet 6773956 6773572 -384 -0.006%
total 107124151 106917891 -206260 -0.193%
Change-Id: I7591cce41e06867ba10a745daae9333513062746
Reviewed-on: https://go-review.googlesource.com/c/go/+/233317
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Michael Munday <mike.munday@ibm.com>
This merges an lis + subf into subfic, and for 32b constants
lwa + subf into oris + ori + subf.
The carry bit is no longer used in code generation, therefore
I think we can clobber it as needed. Note, lowered borrow/carry
arithmetic is self-contained and thus is not affected.
A few extra rules are added to ensure early transformations to
SUBFCconst don't trip up earlier rules, fold constant operations,
or otherwise simplify lowering. Likewise, tests are added to
ensure all rules are hit. Generic constant folding catches
trivial cases, however some lowering rules insert arithmetic
which can introduce new opportunities (e.g BitLen or Slicemask).
I couldn't find a specific benchmark to demonstrate noteworthy
improvements, but this is generating subfic in many of the default
bent test binaries, so we are at least saving a little code space.
Change-Id: Iad7c6e5767eaa9dc24dc1c989bd1c8cfe1982012
Reviewed-on: https://go-review.googlesource.com/c/go/+/249461
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
This CL optimizes code that uses a carry from a function such as
bits.Add64 as the condition in an if statement. For example:
x, c := bits.Add64(a, b, 0)
if c != 0 {
panic("overflow")
}
Rather than converting the carry into a 0 or a 1 value and using
that as an input to a comparison instruction the carry flag is now
used as the input to a conditional branch directly. This typically
removes an ADD LOGICAL WITH CARRY instruction when user code is
doing overflow detection and is closer to the code that a user
would expect to generate.
Change-Id: I950431270955ab72f1b5c6db873b6abe769be0da
Reviewed-on: https://go-review.googlesource.com/c/go/+/219757
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Before using some CPU instructions, we must check for their presence.
We use global variables in the runtime package to record features.
Prior to this CL, we issued a regular memory load for these features.
The downside to this is that, because it is a regular memory load,
it cannot be hoisted out of loops or otherwise reordered with other loads.
This CL introduces a new intrinsic just for checking cpu features.
It still ends up resulting in a memory load, but that memory load can
now be floated to the entry block and rematerialized as needed.
One downside is that the regular load could be combined with the comparison
into a CMPBconstload+NE. This new intrinsic cannot; it generates MOVB+TESTB+NE.
(It is possible that MOVBQZX+TESTQ+NE would be better.)
This CL does only amd64. It is easy to extend to other architectures.
For the benchmark in #36196, on my machine, this offers a mild speedup.
name old time/op new time/op delta
FMA-8 1.39ns ± 6% 1.29ns ± 9% -7.19% (p=0.000 n=97+96)
NonFMA-8 2.03ns ±11% 2.04ns ±12% ~ (p=0.618 n=99+98)
Updates #15808
Updates #36196
Change-Id: I75e2fcfcf5a6df1bdb80657a7143bed69fca6deb
Reviewed-on: https://go-review.googlesource.com/c/go/+/212360
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This change adds an intrinsic for Mul64 on s390x. To achieve that,
a new assembly instruction, MLGR, is introduced in s390x/asmz.go. This assembly
instruction directly uses an existing instruction on Z and supports multiplication
of two 64 bit unsigned integer and stores the result in two separate registers.
In this case, we require the multiplcand to be stored in register R3 and
the output result (the high and low 64 bit of the product) to be stored in
R2 and R3 respectively.
A test case is also added.
Benchmark:
name old time/op new time/op delta
Mul-18 11.1ns ± 0% 1.4ns ± 0% -87.39% (p=0.002 n=8+10)
Mul32-18 2.07ns ± 0% 2.07ns ± 0% ~ (all equal)
Mul64-18 11.1ns ± 1% 1.4ns ± 0% -87.42% (p=0.000 n=10+10)
Change-Id: Ieca6ad1f61fff9a48a31d50bbd3f3c6d9e6675c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/194572
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL reverts CL 192097 and fixes the issue in CL 189277.
Change-Id: Icd271262e1f5019a8e01c91f91c12c1261eeb02b
Reviewed-on: https://go-review.googlesource.com/c/go/+/192519
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The syntax of a shifted operation does not have a "$" sign for
the shift amount. Remove it.
Change-Id: I50782fe942b640076f48c2fafea4d3175be8ff99
Reviewed-on: https://go-review.googlesource.com/c/go/+/192100
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL optimizes math.bits.TrailingZeros16 on 386 with
a pair of BSFL and ORL instrcutions.
The case TrailingZeros16-4 of the benchmark test in
math/bits shows big improvement.
name old time/op new time/op delta
TrailingZeros16-4 1.55ns ± 1% 0.87ns ± 1% -43.87% (p=0.000 n=50+49)
Change-Id: Ia899975b0e46f45dcd20223b713ed632bc32740b
Reviewed-on: https://go-review.googlesource.com/c/go/+/189277
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL adds intrinsics for the 64-bit addition and subtraction
functions in math/bits. These intrinsics use the condition code
to propagate the carry or borrow bit.
To make the carry chains more efficient I've removed the
'clobberFlags' property from most of the load and store
operations. Originally these ops did clobber flags when using
offsets that didn't fit in a signed 20-bit integer, however
that is no longer true.
As with other platforms the intrinsics are faster when executed
in a chain rather than a loop because currently we need to spill
and restore the carry bit between each loop iteration. We may
be able to reduce the need to do this on s390x (e.g. by using
compare-and-branch instructions that do not clobber flags) in the
future.
name old time/op new time/op delta
Add64 1.21ns ± 2% 2.03ns ± 2% +67.18% (p=0.000 n=7+10)
Add64multiple 2.98ns ± 3% 1.03ns ± 0% -65.39% (p=0.000 n=10+9)
Sub64 1.23ns ± 4% 2.03ns ± 1% +64.85% (p=0.000 n=10+10)
Sub64multiple 3.73ns ± 4% 1.04ns ± 1% -72.28% (p=0.000 n=10+8)
Change-Id: I913bbd5e19e6b95bef52f5bc4f14d6fe40119083
Reviewed-on: https://go-review.googlesource.com/c/go/+/174303
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change creates an intrinsic for Add64 for ppc64x and adds a
testcase for it.
name old time/op new time/op delta
Add64-160 1.90ns ±40% 2.29ns ± 0% ~ (p=0.119 n=5+5)
Add64multiple-160 6.69ns ± 2% 2.45ns ± 4% -63.47% (p=0.016 n=4+5)
Change-Id: I9abe6fb023fdf62eea3c9b46a1820f60bb0a7f97
Reviewed-on: https://go-review.googlesource.com/c/go/+/173758
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
This CL instrinsifies Add64 with arm64 instruction sequence ADDS, ADCS
and ADC, and optimzes the case of carry chains.The CL also changes the
test code so that the intrinsic implementation can be tested.
Benchmarks:
name old time/op new time/op delta
Add-224 2.500000ns +- 0% 2.090000ns +- 4% -16.40% (p=0.000 n=9+10)
Add32-224 2.500000ns +- 0% 2.500000ns +- 0% ~ (all equal)
Add64-224 2.500000ns +- 0% 1.577778ns +- 2% -36.89% (p=0.000 n=10+9)
Add64multiple-224 6.000000ns +- 0% 2.000000ns +- 0% -66.67% (p=0.000 n=10+10)
Change-Id: I6ee91c9a85c16cc72ade5fd94868c579f16c7615
Reviewed-on: https://go-review.googlesource.com/c/go/+/159017
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL adds two rules to turn patterns like ((x<<8) | (x>>8)) (the type of
x is uint16, "|" can also be "+" or "^") to a REV16 instruction on arm v6+.
This optimization rule can be used for math/bits.ReverseBytes16.
Benchmarks on arm v6:
name old time/op new time/op delta
ReverseBytes-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes16-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes32-32 1.29ns ± 0% 1.29ns ± 0% ~ (all equal)
ReverseBytes64-32 1.43ns ± 0% 1.43ns ± 0% ~ (all equal)
Change-Id: I819e633c9a9d308f8e476fb0c82d73fb73dd019f
Reviewed-on: https://go-review.googlesource.com/c/go/+/159019
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Note that the intrinsic implementation panics separately for overflow and
divide by zero, which matches the behavior of the pure go implementation.
There is a modest performance improvement after intrinsic implementation.
name old time/op new time/op delta
Div-4 53.0ns ± 1% 47.0ns ± 0% -11.28% (p=0.008 n=5+5)
Div32-4 18.4ns ± 0% 18.5ns ± 1% ~ (p=0.444 n=5+5)
Div64-4 53.3ns ± 0% 47.5ns ± 4% -10.77% (p=0.008 n=5+5)
Updates #28273
Change-Id: Ic1688ecc0964acace2e91bf44ef16f5fb6b6bc82
Reviewed-on: https://go-review.googlesource.com/c/144378
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The current support_XXX variables are specific for the
amd64 and 386 platforms.
Prefix processor capability variables by architecture to have a
consistent naming scheme and avoid reuse of the existing
variables for new platforms.
This also aligns naming of runtime variables closer with internal/cpu
processor capability variable names.
Change-Id: I3eabb29a03874678851376185d3a62e73c1aff1d
Reviewed-on: https://go-review.googlesource.com/c/91435
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change adds codegen tests for the intrinsification on ppc64 of
the OnesCount{64,32,16,8}, and TrailingZeros{64,32,16,8} math/bits
functions.
Change-Id: Id3364921fbd18316850e15c8c71330c906187fdb
Reviewed-on: https://go-review.googlesource.com/c/141897
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Add some rules to match the Go code like:
y &= 63
x << y | x >> (64-y)
or
y &= 63
x >> y | x << (64-y)
as a ROR instruction. Make math/bits.RotateLeft faster on arm64.
Extends CL 132435 to arm64.
Benchmarks of math/bits.RotateLeftxxN:
name old time/op new time/op delta
RotateLeft-8 3.548750ns +- 1% 2.003750ns +- 0% -43.54% (p=0.000 n=8+8)
RotateLeft8-8 3.925000ns +- 0% 3.925000ns +- 0% ~ (p=1.000 n=8+8)
RotateLeft16-8 3.925000ns +- 0% 3.927500ns +- 0% ~ (p=0.608 n=8+8)
RotateLeft32-8 3.925000ns +- 0% 2.002500ns +- 0% -48.98% (p=0.000 n=8+8)
RotateLeft64-8 3.536250ns +- 0% 2.003750ns +- 0% -43.34% (p=0.000 n=8+8)
Change-Id: I77622cd7f39b917427e060647321f5513973232c
Reviewed-on: https://go-review.googlesource.com/122542
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
