In the situation where the Client.Jar is set and the Request.Header
has cookies manually inserted, the redirect logic needs to be
able to apply changes to cookies from "Set-Cookie" headers to both
the Jar and the manually inserted Header cookies.
Since Header cookies lack information about the original domain
and path, the logic in this CL simply removes cookies from the
initial Header if any subsequent "Set-Cookie" matches. Thus,
in the event of cookie conflicts, the logic preserves the behavior
prior to change made in golang.org/cl/28930.
Fixes#17494
Updates #4800
Change-Id: I645194d9f97ff4d95bd07ca36de1d6cdf2f32429
Reviewed-on: https://go-review.googlesource.com/31435
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now that sweeping and span marking use the sweep list, there's no need
for the work.spans snapshot of the allspans list. This change
eliminates the few remaining uses of it, which are either dead code or
can use allspans directly, and removes work.spans and its support
functions.
Change-Id: Id5388b42b1e68e8baee853d8eafb8bb4ff95bb43
Reviewed-on: https://go-review.googlesource.com/30537
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently markrootSpans iterates over all spans ever allocated to find
the in-use spans. Since we now have a list of in-use spans, change it
to iterate over that instead.
This, combined with the previous change, fixes#9265. Before these two
changes, blowing up the heap to 8GB and then shrinking it to a 0MB
live set caused the small-heap portion of the test to run 60x slower
than without the initial blowup. With these two changes, the time is
indistinguishable.
No significant effect on other benchmarks.
Change-Id: I4a27e533efecfb5d18cba3a87c0181a81d0ddc1e
Reviewed-on: https://go-review.googlesource.com/30536
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently sweeping walks the list of all spans, which means the work
in sweeping is proportional to the maximum number of spans ever used.
If the heap was once large but is now small, this causes an
amortization failure: on a small heap, GCs happen frequently, but a
full sweep still has to happen in each GC cycle, which means we spent
a lot of time in sweeping.
Fix this by creating a separate list consisting of just the in-use
spans to be swept, so sweeping is proportional to the number of in-use
spans (which is proportional to the live heap). Specifically, we
create two lists: a list of unswept in-use spans and a list of swept
in-use spans. At the start of the sweep cycle, the swept list becomes
the unswept list and the new swept list is empty. Allocating a new
in-use span adds it to the swept list. Sweeping moves spans from the
unswept list to the swept list.
This fixes the amortization problem because a shrinking heap moves
spans off the unswept list without adding them to the swept list,
reducing the time required by the next sweep cycle.
Updates #9265. This fix eliminates almost all of the time spent in
sweepone; however, markrootSpans has essentially the same bug, so now
the test program from this issue spends all of its time in
markrootSpans.
No significant effect on other benchmarks.
Change-Id: Ib382e82790aad907da1c127e62b3ab45d7a4ac1e
Reviewed-on: https://go-review.googlesource.com/30535
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently we set the len and cap of h.spans to the full reserved
region of the address space and track the actual mapped region
separately in h.spans_mapped. Since we have both the len and cap at
our disposal, change things so len(h.spans) tracks how much of the
spans array is mapped and eliminate h.spans_mapped. This simplifies
mheap and means we'll get nice "index out of bounds" exceptions if we
do try to go off the end of the spans rather than a SIGSEGV.
Change-Id: I8ed9a1a9a844d90e9fd2e269add4704623dbdfe6
Reviewed-on: https://go-review.googlesource.com/30533
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Like h_allspans and mheap_.allspans, these were two ways of referring
to the spans array from when the runtime was split between C and Go.
Clean this up by making mheap_.spans a slice and eliminating h_spans.
Change-Id: I3aa7038d53c3a4252050aa33e468c48dfed0b70e
Reviewed-on: https://go-review.googlesource.com/30532
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This was necessary in the C days when allspans was an mspan**, but now
that allspans is a Go slice, this is redundant with len(allspans) and
we can use range loops over allspans.
Change-Id: Ie1dc39611e574e29a896e01690582933f4c5be7e
Reviewed-on: https://go-review.googlesource.com/30531
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
These are two ways to refer to the allspans array that hark back to
when the runtime was split between C and Go. Clean this up by making
mheap_.allspans a slice and eliminating h_allspans.
Change-Id: Ic9360d040cf3eb590b5dfbab0b82e8ace8525610
Reviewed-on: https://go-review.googlesource.com/30530
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
When the compiler insert write barriers, the frontend makes
conservative decisions at an early stage. This may have false
positives which result in write barriers for stack writes.
A new phase, writebarrier, is added to the SSA backend, to delay
the decision and eliminate false positives. The frontend still
makes conservative decisions. When building SSA, instead of
emitting runtime calls directly, it emits WB ops (StoreWB,
MoveWB, etc.), which will be expanded to branches and runtime
calls in writebarrier phase. Writes to static locations on stack
are detected and write barriers are removed.
All write barriers of stack writes found by the script from
issue #17330 are eliminated (except two false positives).
Fixes#17330.
Change-Id: I9bd66333da9d0ceb64dcaa3c6f33502798d1a0f8
Reviewed-on: https://go-review.googlesource.com/31131
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The runtime traceback code assumes non-empty frame has link
link register saved on LR architectures. Make sure it is so in
the assember.
Also make sure that LR is stored before update SP, so the traceback
code will not see a half-updated stack frame if a signal comes
during the execution of function prologue.
Fixes#17381.
Change-Id: I668b04501999b7f9b080275a2d1f8a57029cbbb3
Reviewed-on: https://go-review.googlesource.com/31760
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Update the ppc64x disassembly code for use by objdump
from golang.org/x/arch/ppc64/ppc64asm commit fcea5ea.
Enable the objdump testcase for external linking on ppc64le
make a minor fix to the expected output.
Fixes#17447
Change-Id: I769cc7f8bfade594690a476dfe77ab33677ac03b
Reviewed-on: https://go-review.googlesource.com/32015
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The Dragonfly libc returns a non-zero value for malloc(-1).
Fixes#17585.
Change-Id: Icfe68011ccbc75c676273ee3c3efdf24a520a004
Reviewed-on: https://go-review.googlesource.com/32050
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For historical reasons, the go/doc package does not include
the methods within an interface as part of the documented
methods for that type. Thus,
go doc ast.Node.Pos
gives an incorrect and confusing error message:
doc: no method Node.Pos in package go/ast
This CL does some dirty work to dig down to the methods
so interface methods now present their documentation:
% go doc ast.node.pos
func Pos() token.Pos // position of first character belonging to the node
%
It must largely sidestep the doc package to do this, which
is a shame. Perhaps things will improve there one day.
The change does not handle embeddings, and in principle the
same approach could be done for struct fields, but that is also
not here yet. But this CL fixes the thing that was bugging me.
Change-Id: Ic10a91936da96f54ee0b2f4a4fe4a8c9b93a5b4a
Reviewed-on: https://go-review.googlesource.com/31852
Reviewed-by: Robert Griesemer <gri@golang.org>
Instead of generating typelink symbols in the compiler
mark types that should have typelinks with a flag.
The linker detects this flag and adds the marked types
to the typelink table.
name old s/op new s/op delta
LinkCmdCompile 0.27 ± 6% 0.25 ± 6% -6.93% (p=0.000 n=97+98)
LinkCmdGo 0.30 ± 5% 0.29 ±10% -4.22% (p=0.000 n=97+99)
name old MaxRSS new MaxRSS delta
LinkCmdCompile 112k ± 3% 106k ± 2% -4.85% (p=0.000 n=100+100)
LinkCmdGo 107k ± 3% 103k ± 3% -3.00% (p=0.000 n=100+100)
Change-Id: Ic95dd4b0101e90c1fa262c9c6c03a2028d6b3623
Reviewed-on: https://go-review.googlesource.com/31772
Run-TryBot: Shahar Kohanim <skohanim@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The condition to determine if any further iterations are needed is
evaluated to false in case it encounters a NaN. Instead, flip the
condition to keep looping until the factor is greater than the machine
roundoff error.
Updates #17577
Change-Id: I058abe73fcd49d3ae4e2f7b33020437cc8f290c3
Reviewed-on: https://go-review.googlesource.com/31952
Reviewed-by: Robert Griesemer <gri@golang.org>
In sinit.go, gdata can already handle strings and complex, so no
reason to handle them separately.
In obj.go, inline gdatastring and gdatacomplex into gdata, since it's
the only caller. Allows extracting out the common Linksym calls.
Passes toolstash -cmp.
Change-Id: I3cb18d9b4206a8a269c36e0d30a345d8e6caba1f
Reviewed-on: https://go-review.googlesource.com/31498
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Bug 15141 was apparently fixed by some other change to the
compiler (this is plausible, it was a weird bug dependent
on a particular way of returning a large named array result),
add the test to ensure that it stays fixed.
Updates #15141.
Change-Id: I3d6937556413fab1af31c5a1940e6931563ce2f3
Reviewed-on: https://go-review.googlesource.com/31972
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It no longer exists as of CL 31010.
Change-Id: Idd61f392544cad8b3f3f8d984dc5c953b473e2e5
Reviewed-on: https://go-review.googlesource.com/31934
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some original shift opcodes for ppc64x expected an operand to be
a mask instead of a shift count, preventing some valid shift counts
from being written.
This adds new opcodes for shifts where needed, using mnemonics that
match the ppc64 asm and allowing the assembler to accept the full set
of valid shift counts.
Fixes#15016
Change-Id: Id573489f852038d06def279c13fd0523736878a7
Reviewed-on: https://go-review.googlesource.com/31853
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
These are emulated by the assembler and we don't need them.
Change-Id: I2b07c5315a5b642fdb5e50b468453260ae121164
Reviewed-on: https://go-review.googlesource.com/31758
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Before go supported buildmode=shared ·f symbols used to be defined
only when they were used. In order to solve #11480 the strategy
was changed to have these symbols defined on declaration which is
less efficient and generates many unneeded symbols.
With this change the best strategy is chosen for each situation,
improving static linking time:
name old s/op new s/op delta
LinkCmdCompile 0.27 ± 5% 0.25 ± 6% -8.22% (p=0.000 n=98+96)
LinkCmdGo 0.30 ± 6% 0.29 ± 8% -5.03% (p=0.000 n=95+99)
name old MaxRSS new MaxRSS delta
LinkCmdCompile 107k ± 2% 98k ± 3% -8.32% (p=0.000 n=99+100)
LinkCmdGo 106k ± 3% 104k ± 3% -1.94% (p=0.000 n=99+100)
Change-Id: I965eeee30541e724fd363804adcd6fda10f965a4
Reviewed-on: https://go-review.googlesource.com/31031
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
In general, these functions cannot behave correctly when given a
hostname, because a hostname may represent multiple IP addresses, and
first(isIPv4) chooses at most one.
Updates #9334
Change-Id: Icfb629f84af4d976476385a3071270253c0000b1
Reviewed-on: https://go-review.googlesource.com/31931
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Looking at the kernel sources, I don't see how this is possible.
But obviously it is. Just try again.
Fixes#17161.
Change-Id: Iea7d53f7cf75944792d2f75a0d07129831c7bcdb
Reviewed-on: https://go-review.googlesource.com/31823
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The old code leaves garbages in a temporary directory because it
cannot remove the current working directory on windows.
The new code changes the directory before calling os.Remove.
Furthermore, the old code assumes that ioutil.TempDir (os.TempDir)
doesn't return a relative path nor an UNC path.
If it isn't the case, the new code calls t.Fatal earlier for preventing
ambiguous errors.
Finally, the old code reassigns the variable which is used by the defer
function. It could cause unexpected results, so avoid that.
Change-Id: I5fc3902059ecaf18dc1341ecc4979d1206034cd7
Reviewed-on: https://go-review.googlesource.com/31790
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Updates #15345
Change-Id: I447d133512e99a9900928a910e161a85db6e8b75
Reviewed-on: https://go-review.googlesource.com/31792
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
