Fixes#1742.
I hope.
Also this picks up an update to go_tutorial.html that should already have happened.
R=brainman, rsc, peterGo
CC=golang-dev
https://golang.org/cl/4452050
For example, with GOPATH set like so
GOPATH=/home/adg/gocode
And after creating some subdirectories
mkdir /home/adg/gocode/{bin,pkg,src}
I can use goinstall to install the github.com/nf/goto web server,
which depends on the github.com/nf/stat package, with
goinstall github.com/nf/goto
This downloads and installs all dependencies (that aren't already
installed) like so
/home/adg/gocode/bin/goto
/home/adg/gocode/pkg/darwin_amd64/github.com/nf/stat.a
/home/adg/gocode/src/github.com/nf/goto/...
/home/adg/gocode/src/github.com/nf/stat/...
R=rsc, niemeyer
CC=golang-dev
https://golang.org/cl/4438043
I ran the new verification code against a large number of certificates
with a huge (>1000) number of intermediates.
I had previously convinced myself that a cycle in the certificate
graph implied a cycle in the hash graph (and thus, a contradiction).
This is bogus because the signatures don't cover each other.
Secondly, I managed to drive the verification into a time explosion
with a fully connected graph of certificates. The code would try to
walk the factorial number of paths.
This change switches the CertPool to dealing with indexes of
certificates rather than pointers: this makes equality easy. (I didn't
want to compare pointers because a reasonable gc could move objects
around over time.)
Secondly, verification now memorizes the chains from a given
certificate. This is dynamic programming for the lazy, but there's a
solid reason behind it: dynamic programming would ignore the Issuer
hints that we can exploit by walking up the chain rather than down.
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4439070
Used to fault trying to access l->list->next
when l->list == nil after MCentral_AllocList.
Now prints
runtime: out of memory: no room in arena for 65536-byte allocation (536870912 in use)
throw: out of memory
followed by stack trace.
Fixes#1650.
R=r, dfc
CC=golang-dev
https://golang.org/cl/4446062
This change will allow to generate valid executable,
even if rsc disables dwarf generation, as it happend
at revision 9a64273f9d68.
R=rsc
CC=golang-dev, lvd, vcc
https://golang.org/cl/4425066
Also, 6g was passing uninitialized
Node &n2 to regalloc, causing non-deterministic
register collisions (but only when both left and
right hand side of comparison had function calls).
Fixes#1728.
R=ken2
CC=golang-dev
https://golang.org/cl/4425070
This permits the websocket handler to inspect http headers and such.
Fixes#1726.
R=ukai, bradfitz, bradfitzgo
CC=golang-dev
https://golang.org/cl/4439069
The unexported version returns a sensible default when the user hasn't
set a value. The exported version crashes in that case.
R=bradfitzgo, rsc1
CC=golang-dev
https://golang.org/cl/4435070
The path conversion is done automatically if msys' builtin
shell commands are used.
R=rsc1, peterGo, brainman, Mr_Dark, r
CC=golang-dev
https://golang.org/cl/4452042
Static symbols were not being marked as such.
I also made the 'z' symbols use the first byte of
the name instead of an explicit NUL so that if
the symbol table format is ever changed, the only
place that would need updating is addhist().
R=rsc
CC=golang-dev
https://golang.org/cl/4366047
Having the test be in the container/heap package yields a cycle
container/heap (for the test)
-> testing
-> time
-> container/heap (for timerHeap)
Occasionally the linker would get mixed up, resulting in a test panic
in a very weird place.
R=rsc, r2
CC=golang-dev
https://golang.org/cl/4395042
With full multi-prime support we can support version 1 PKCS#1 private
keys. This means exporting all the members of rsa.PrivateKey, thus
making the API a little messy. However there has already been another
request to export this so it seems to be something that's needed.
Over time, rsa.GenerateMultiPrimeKey will replace rsa.GenerateKey, but
I need to work on the prime balance first because we're no longer
generating primes which are a multiples of 8 bits.
Fixes#987.
R=rsc
CC=golang-dev
https://golang.org/cl/4378046
Only for Unix presently. Other operating systems
are stubbed out, as well as arm (lacks cgo).
R=rsc, r, bradfitzwork
CC=golang-dev
https://golang.org/cl/4440057
Adds an optional hook to Parser to let charset
converters step in when a processing directive
with a non-UTF-8 encoding is specified.
(Open to alternative proposals too...)
R=rsc
CC=golang-dev
https://golang.org/cl/4437061
The solution may be a bit of a sledgehammer, but it looks like
a temporary situation anyway.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/4400042
note: due to issue 1466 the Msghdr and BpfProgram
struct for src/pkg/syscall/ztypes_darwin_386.go,
src/pkg/syscall/ztypes_darwin_amd64.go had to be
edited after the godefs generation.
R=rsc
CC=golang-dev
https://golang.org/cl/4403042
Avoid getting out of synch when a function, such as main.init,
has no associated line number information. Without this the
function before main.init can skip the PC all the way to the
next function, which will cause the next function's line table
to be associated with main.init, and leave subsequent
functions with the wrong line numbers.
R=rsc
CC=golang-dev
https://golang.org/cl/4426055
On Mac X 10.6 /etc/resolv.conf is changed dynamically,
and may not exist at all when all network connections
are turned off, thus any lookup, even for "localhost"
would fail with "error reading DNS config: open
/etc/resolv.conf: no such file or directory". This
change avoids the error by trying to lookup addresses
in /etc/hosts before loading DNS config.
R=golang-dev, rsc1, rsc
CC=golang-dev
https://golang.org/cl/4431054
The SW_HIDE parameter looks like the only way for a windows GUI application to execute a CLI subcommand without having a shell windows appearing.
R=brainman, golang-dev, bradfitzgo, rsc1
CC=golang-dev
https://golang.org/cl/4439055
go/types: update for export data format change
reflect: require package qualifiers to match during interface check
runtime: require package qualifiers to match during interface check
test: fixed bug324, adapt to be silent
Fixes#1550.
Issue 1536 remains open.
R=gri, ken2, r
CC=golang-dev
https://golang.org/cl/4442071
This CL makes reflect require that values be assignable to the target type
in exactly the same places where that is the rule in Go. It also adds
the Implements and AssignableTo methods so that callers can check
the types themselves so as to avoid a panic.
Before this CL, reflect required strict type identity.
This CL expands Call to accept and correctly marshal arbitrary
argument lists for variadic functions; it introduces CallSlice for use
in the case where the slice for the variadic argument is already known.
Fixes#327.
Fixes#1212.
R=r, dsymonds
CC=golang-dev
https://golang.org/cl/4439058
This CL makes it possible to resolve DNS names on OS X
without offending the Application-Level Firewall.
It also means that cross-compiling from one operating
system to another is no longer possible when using
package net, because cgo needs to be able to sniff around
the local C libraries. We could special-case this one use
and check in generated files, but it seems more trouble
than it's worth. Cross compiling is dead anyway.
It is still possible to use either GOARCH=amd64 or GOARCH=386
on typical Linux and OS X x86 systems.
It is also still possible to build GOOS=linux GOARCH=arm on
any system, because arm is for now excluded from this change
(there is no cgo for arm yet).
R=iant, r, mikioh
CC=golang-dev
https://golang.org/cl/4437053
This CL gives goinstall the ability to build commands,
not just packages.
"goinstall foo.googlecode.com/hg/bar" will build the command named
"bar" and install it to GOBIN. "goinstall ." will use the name of the
local directory as the command name.
R=rsc, niemeyer
CC=golang-dev
https://golang.org/cl/4426045
* Accept armored private key blocks
* If an armored block is missing, return an InvalidArgumentError,
rather than ignoring it.
* If every key in a block is skipped due to being unsupported,
return the last unsupported error.
* Include the numeric type of unsupported public keys.
* Don't assume that the self-signature comes immediately after the
user id packet.
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4434048
This pulls in changes that should have been in 3faf9d0c10c0, but
weren't because x509.go was part of another changelist.
TBR=bradfitzgo
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4433056
People have a need to verify certificates in situations other than TLS
client handshaking. Thus this CL moves certificate verification into
x509 and expands its abilities.
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4407046
I should have done this a year ago in:
changeset: 5137:686b18098944
user: Russ Cox <rsc@golang.org>
date: Thu Mar 25 14:05:54 2010 -0700
files: src/cmd/8c/swt.c
description:
make alignment rules match 8g, just like 6c matches 6g.
R=ken2
CC=golang-dev
https://golang.org/cl/760042
R=ken2
CC=golang-dev
https://golang.org/cl/4437054
* Reduces malloc counts during gob encoder/decoder test from 6/6 to 3/5.
The current reflect uses Set to mean two subtly different things.
(1) If you have a reflect.Value v, it might just represent
itself (as in v = reflect.NewValue(42)), in which case calling
v.Set only changed v, not any other data in the program.
(2) If you have a reflect Value v derived from a pointer
or a slice (as in x := []int{42}; v = reflect.NewValue(x).Index(0)),
v represents the value held there. Changing x[0] affects the
value returned by v.Int(), and calling v.Set affects x[0].
This was not really by design; it just happened that way.
The motivation for the new reflect implementation was
to remove mallocs. The use case (1) has an implicit malloc
inside it. If you can do:
v := reflect.NewValue(0)
v.Set(42)
i := v.Int() // i = 42
then that implies that v is referring to some underlying
chunk of memory in order to remember the 42; that is,
NewValue must have allocated some memory.
Almost all the time you are using reflect the goal is to
inspect or to change other data, not to manipulate data
stored solely inside a reflect.Value.
This CL removes use case (1), so that an assignable
reflect.Value must always refer to some other piece of data
in the program. Put another way, removing this case would
make
v := reflect.NewValue(0)
v.Set(42)
as illegal as
0 = 42.
It would also make this illegal:
x := 0
v := reflect.NewValue(x)
v.Set(42)
for the same reason. (Note that right now, v.Set(42) "succeeds"
but does not change the value of x.)
If you really wanted to make v refer to x, you'd start with &x
and dereference it:
x := 0
v := reflect.NewValue(&x).Elem() // v = *&x
v.Set(42)
It's pretty rare, except in tests, to want to use NewValue and then
call Set to change the Value itself instead of some other piece of
data in the program. I haven't seen it happen once yet while
making the tree build with this change.
For the same reasons, reflect.Zero (formerly reflect.MakeZero)
would also return an unassignable, unaddressable value.
This invalidates the (awkward) idiom:
pv := ... some Ptr Value we have ...
v := reflect.Zero(pv.Type().Elem())
pv.PointTo(v)
which, when the API changed, turned into:
pv := ... some Ptr Value we have ...
v := reflect.Zero(pv.Type().Elem())
pv.Set(v.Addr())
In both, it is far from clear what the code is trying to do. Now that
it is possible, this CL adds reflect.New(Type) Value that does the
obvious thing (same as Go's new), so this code would be replaced by:
pv := ... some Ptr Value we have ...
pv.Set(reflect.New(pv.Type().Elem()))
The changes just described can be confusing to think about,
but I believe it is because the old API was confusing - it was
conflating two different kinds of Values - and that the new API
by itself is pretty simple: you can only Set (or call Addr on)
a Value if it actually addresses some real piece of data; that is,
only if it is the result of dereferencing a Ptr or indexing a Slice.
If you really want the old behavior, you'd get it by translating:
v := reflect.NewValue(x)
into
v := reflect.New(reflect.Typeof(x)).Elem()
v.Set(reflect.NewValue(x))
Gofix will not be able to help with this, because whether
and how to change the code depends on whether the original
code meant use (1) or use (2), so the developer has to read
and think about the code.
You can see the effect on packages in the tree in
https://golang.org/cl/4423043/.
R=r
CC=golang-dev
https://golang.org/cl/4435042
NewRequest will save a lot of boilerplate code.
This also updates some docs on Request.Write and
adds some tests.
R=rsc, petar-m, r
CC=golang-dev
https://golang.org/cl/4406047
Don't use the rewrite rule from a previous test
for the next test if there is no rewrite rule
provided.
R=r, r2
CC=golang-dev
https://golang.org/cl/4419045
The new reflection API makes it an error to call value.Set(x)
if x is invalid. Guard for it.
Added corresponding test case.
Fixes#1696.
R=rsc, r
CC=golang-dev
https://golang.org/cl/4398047
Ubuntu and/or GNOME have some bug that likes
to set the "http_proxy" environment variable
and forgets to unset it. This is annoying
to debug. Be clear in the error message that
a proxy was in use.
R=rsc
CC=golang-dev
https://golang.org/cl/4409045
. Missing declaration of runtime.brk_();
. Argument v in runtime.SysReserve() is not used;
(I'd prefer a Plan 9-type solution...)
R=golang-dev, r, r2
CC=golang-dev
https://golang.org/cl/4368076
We already had support on the client side. I also changed the name of
the flag in the ServerHello structure to match the name of the same
flag in the ClientHello (ocspStapling).
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4408044
This fixes our http behavior (even if Handlers forget to
consume a request body, we do it for them before we send
their response header), fixes the racy TestServerExpect,
and adds TestServerConsumesRequestBody.
With GOMAXPROCS>1, the http tests now seem race-free.
R=rsc
CC=golang-dev
https://golang.org/cl/4419042
The list elements are already being allocated out of a
single memory buffer. We can drop the Link* pointer
following and the memory it requires, replacing it with
index operations.
The change also keeps a channel from containing a pointer
back into its own allocation block, which would create a
cycle. Blocks involved in cycles are not guaranteed to be
finalized properly, and channels depend on finalizers to
free OS-level locks on some systems. The self-reference
was keeping channels from being garbage collected.
runtime-gdb.py will need to be updated in order to dump
the content of buffered channels with the new data structure.
Fixes#1676.
R=ken2, r
CC=golang-dev
https://golang.org/cl/4411045
This mostly adds Expect 100-continue tests (from
the perspective of server correctness) that were
missing before.
It also fixes a few missing cases that will
probably never come up in practice, but it's nice
to have handled correctly.
Proper 100-continue client support remains a TODO.
R=rsc, bradfitzwork
CC=golang-dev
https://golang.org/cl/4399044
- replaced existing testdata/test.sh with new gofmt_test
- added initial test case for rewrite tests
TODO: Need to add more tests.
R=rsc
CC=golang-dev
https://golang.org/cl/4368063
This CL is only cut-and-paste, moving code around.
Moving it in a separate CL should simplify the diffs in later CLs.
There are three patterns here.
1. A function like
func (v Value) M() (...) {
return v.panicIfNot(K).(*kValue).M()
}
becomes
func (v Value) M() (...) {
vv := v.panicIfNot(K).(*kValue)
// body of (*kValue).M, s/v./vv./g
}
2. A function like
func (v Value) M() (...) {
return v.panicIfNots(kList).(mer).M()
}
becomes
func (v Value) M() (...) {
switch vv := v.panicIfNots(kList).(type) {
case *k1Value:
// body of (*k1Value).M, s/v./vv./g
case *k2Value:
// body of (*k2Value).M, s/v./vv./g
...
}
panic("not reached")
}
3. The rewrite of Value.Set follows 2, but each case
is built from the bodies of (*kValue).SetValue and (*kValue).Set.
func (v *kValue) SetValue(x Value) {
v.Set(x.panicIfNot(K).(*kValue)
}
func (v *kValue) Set(x *kValue) {
... body
}
becomes, in the switch from 2,
case *kValue:
xx := x.panicIfNot(K).(*kValue)
... body, s/v./vv./g; s/x./xx./g
R=r
CC=golang-dev
https://golang.org/cl/4398044
This CL changes the behavior of 'make install' and 'make test'
in the src/cmd directory and the src/pkg directory to have
each recursive make clean up after itself immediately.
It does the same in test/run, removing $F.$A and $A.out
(the common byproducts) between runs.
On machines with slow disks and aggressive kernel caching,
cleaning up immediately can mean that the intermediate
objects never get written to disk.
This change eliminates almost all the disk waiting during
all.bash on my laptop (a Thinkpad X201s with an SSD running Linux).
147.50u 19.95s 277.34r before
148.53u 21.64s 179.59r after
R=golang-dev, r, iant2
CC=golang-dev
https://golang.org/cl/4413042
It matches encoding/line exactly and the tests are copied from there.
If we land this, then encoding/line will get marked as deprecated then
deleted in time.
R=rsc, rog, peterGo
CC=golang-dev
https://golang.org/cl/4389046
With the (partial) resolution of identifiers done
by the go/parser, ast.Objects point may introduce
cycles in the AST. Don't follow *ast.Objects, and
replace them with nil instead (they are likely
incorrect after a rewrite anyway).
- minor manual cleanups after reflect change automatic rewrite
- includes fix by rsc related to reflect change
Fixes#1667.
R=rsc
CC=golang-dev
https://golang.org/cl/4387044
The ld time was dominated by symbol table processing, so
* increase hash table size
* emit fewer symbols in gc (just 1 per string, 1 per type)
* add read-only lookup to avoid creating spurious symbols
* add linked list to speed whole-table traversals
Breaks dwarf generator (no idea why), so disable dwarf.
Reduces time for 6l to link godoc by 25%.
R=ken2
CC=golang-dev
https://golang.org/cl/4383047
Note that declarations.golden is not using spaces for alignment (so
that the alignment tabs are visible) which is why this change affects
the test cases significantly. gofmt uses spaces for alignment (by default)
and only tabs for indentation.
gofmt -w src misc (no changes)
Fixes#1673.
R=iant
CC=golang-dev
https://golang.org/cl/4388044
* add -diff command line option
* use scoping information in refersTo, isPkgDot, isPtrPkgDot.
* add new scoping-based helpers countUses, rewriteUses, assignsTo, isTopName.
* rename rewrite to walk, add walkBeforeAfter.
* add toy typechecker, a placeholder for go/types
R=gri
CC=golang-dev
https://golang.org/cl/4285053
Type is now an interface that implements all the possible type methods.
Instead of a type switch on a reflect.Type t, switch on t.Kind().
If a method is invoked on the wrong kind of type (for example,
calling t.Field(0) when t.Kind() != Struct), the call panics.
There is one method renaming: t.(*ChanType).Dir() is now t.ChanDir().
Value is now a struct value that implements all the possible value methods.
Instead of a type switch on a reflect.Value v, switch on v.Kind().
If a method is invoked on the wrong kind of value (for example,
calling t.Recv() when t.Kind() != Chan), the call panics.
Since Value is now a struct, not an interface, its zero value
cannot be compared to nil. Instead of v != nil, use v.IsValid().
Instead of other uses of nil as a Value, use Value{}, the zero value.
Many methods have been renamed, most due to signature conflicts:
OLD NEW
v.(*ArrayValue).Elem v.Index
v.(*BoolValue).Get v.Bool
v.(*BoolValue).Set v.SetBool
v.(*ChanType).Dir v.ChanDir
v.(*ChanValue).Get v.Pointer
v.(*ComplexValue).Get v.Complex
v.(*ComplexValue).Overflow v.OverflowComplex
v.(*ComplexValue).Set v.SetComplex
v.(*FloatValue).Get v.Float
v.(*FloatValue).Overflow v.OverflowFloat
v.(*FloatValue).Set v.SetFloat
v.(*FuncValue).Get v.Pointer
v.(*InterfaceValue).Get v.InterfaceData
v.(*IntValue).Get v.Int
v.(*IntValue).Overflow v.OverflowInt
v.(*IntValue).Set v.SetInt
v.(*MapValue).Elem v.MapIndex
v.(*MapValue).Get v.Pointer
v.(*MapValue).Keys v.MapKeys
v.(*MapValue).SetElem v.SetMapIndex
v.(*PtrValue).Get v.Pointer
v.(*SliceValue).Elem v.Index
v.(*SliceValue).Get v.Pointer
v.(*StringValue).Get v.String
v.(*StringValue).Set v.SetString
v.(*UintValue).Get v.Uint
v.(*UintValue).Overflow v.OverflowUint
v.(*UintValue).Set v.SetUint
v.(*UnsafePointerValue).Get v.Pointer
v.(*UnsafePointerValue).Set v.SetPointer
Part of the motivation for this change is to enable a more
efficient implementation of Value, one that does not allocate
memory during most operations. To reduce the size of the CL,
this CL's implementation is a wrapper around the old API.
Later CLs will make the implementation more efficient without
changing the API.
Other CLs to be submitted at the same time as this one
add support for this change to gofix (4343047) and update
the Go source tree (4353043).
R=gri, iant, niemeyer, r, rog, gustavo, r2
CC=golang-dev
https://golang.org/cl/4281055
This CL defines a new, more Go-like representation of
Go types (different structs for different types as
opposed to a single Type node). It also implements
an ast.Importer for object/archive files generated
by the gc compiler tool chain. Besides the individual
type structs, the main difference is the handling of
named types: In the old world, a named type had a
non-nil *Object pointer but otherwise looked no
different from other types. In this new model, named
types have their own representation types.Name. As
a result, resolving cycles is a bit simpler during
construction, at the cost of having to deal with
types.Name nodes explicitly later. It remains to be
seen if this is a good approach. Nevertheless, code
involving types reads more nicely and benefits from
full type checking. Also, the representation seems
to more closely match the spec wording.
Credits: The original version of the gc importer was
written by Evan Shaw (chickencha@gmail.com). The new
version in this CL is based largely on Evan's original
code but contains bug fixes, a few simplifications,
some restructuring, and was adjusted to use the
new type hierarchy. I have added a comprehensive test
that imports all packages found under $GOROOT/pkg (with
a 3s time-out to limit the run-time of the test). Run
gotest -v for details.
The original version of ExportData (exportdata.go) was
written by Russ Cox (rsc@golang.org). The current version
is returning the internal buffer positioned at the beginning
of the export data instead of printing the export data to
stdout.
With the new types package, the existing in-progress
typechecker package is deprecated. I will delete it
once all functionality has been brought over.
R=eds, rog, rsc
CC=golang-dev
https://golang.org/cl/4314054
