MOVLconst must have a properly sign-extended auxint constant.
The bit operations in these rules don't enforce that invariant.
The easiest fix is just to turn on properly typed auxint fields
(which is what fixed this issue at tip).
Fixes#42753
Change-Id: I264245fad45067a6ade65326f7fe681feb5f3739
Reviewed-on: https://go-review.googlesource.com/c/go/+/272028
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
storeType splits compound stores up into a scalar parts and a pointer parts.
The scalar part happens unconditionally, and the pointer part happens
under the guard of a write barrier check.
Types which are declared as pointers, but are represented as scalars because
they might have "bad" values, were not handled correctly here. They ended
up not getting stored in either set.
Fixes#42151
Change-Id: I46f6600075c0c370e640b807066247237f93c7ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/264300
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(cherry picked from commit 933721b8c7)
Reviewed-on: https://go-review.googlesource.com/c/go/+/265719
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
pointers to go:notinheap types should be treated as scalars. That
means they shouldn't be stored directly in interfaces, or directly
in reflect.Value.ptr.
Also be sure to use uintpr to compare such pointers in reflect.DeepEqual.
Fixes#42169
Change-Id: I53735f6d434e9c3108d4940bd1bae14c61ef2a74
Reviewed-on: https://go-review.googlesource.com/c/go/+/264480
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(cherry picked from commit 009d714098)
Reviewed-on: https://go-review.googlesource.com/c/go/+/265720
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The 32-bit left shift constant folding rule should keep its result
properly sign extended.
Fixes#41720Fixes#41711
Change-Id: I0fc74444d444274e911952e1725dab0b7737a846
Reviewed-on: https://go-review.googlesource.com/c/go/+/258817
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
//go:notinheap
type T int
type U T
We already correctly propagate the notinheap-ness of T to U. But we
have an assertion in the typechecker that if there's no explicit
//go:notinheap associated with U, then report an error. Get rid of
that error so that implicit propagation is allowed.
Adjust the tests so that we make sure that uses of types like U
do correctly report an error when U is used in a context that might
cause a Go heap allocation.
Update #41432
Change-Id: I1692bc7cceff21ebb3f557f3748812a40887118d
Reviewed-on: https://go-review.googlesource.com/c/go/+/255637
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
(cherry picked from commit 22053790fa)
Reviewed-on: https://go-review.googlesource.com/c/go/+/255697
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
They can't reasonably be allocated on the heap. Not a huge deal, but
it has an interesting and useful side effect.
After CL 249917, the compiler and runtime treat pointers to
go:notinheap types as uintptrs instead of real pointers (no write
barrier, not processed during stack scanning, ...). That feature is
exactly what we want for cgo to fix#40954. All the cases we have of
pointers declared in C, but which might actually be filled with
non-pointer data, are of this form (JNI's jobject heirarch, Darwin's
CFType heirarchy, ...).
Fixes#40954
Change-Id: I44a3b9bc2513d4287107e39d0cbbd0efd46a3aae
Reviewed-on: https://go-review.googlesource.com/c/go/+/250940
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-on: https://go-review.googlesource.com/c/go/+/255321
The alias doesn't need to be marked go:notinheap. It gets its
notinheap-ness from the target type.
Without this change, the type alias test in the notinheap.go file
generates these two errors:
notinheap.go:62: misplaced compiler directive
notinheap.go:63: type nih must be go:notinheap
The first is a result of go:notinheap pragmas not applying
to type alias declarations.
The second is the result of then trying to match the notinheap-ness
of the alias and the target type.
Add a few more go:notinheap tests while we are here.
Update #40954
Change-Id: I067ec47698df6e9e593e080d67796fd05a1d480f
Reviewed-on: https://go-review.googlesource.com/c/go/+/250939
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Trust: Keith Randall <khr@golang.org>
Reviewed-on: https://go-review.googlesource.com/c/go/+/255337
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
Right now we just prevent such types from being on the heap. This CL
makes it so they cannot appear on the stack either. The distinction
between heap and stack is pretty vague at the language level (e.g. it
is affected by -N), and we don't need the flexibility anyway.
Once go:notinheap types cannot be in either place, we don't need to
consider pointers to such types to be pointers, at least according to
the garbage collector and stack copying. (This is the big win of this
CL, in my opinion.)
The distinction between HasPointers and HasHeapPointer no longer
exists. There is only HasPointers.
This CL is cleanup before possible use of go:notinheap to fix#40954.
Update #13386
Change-Id: Ibd895aadf001c0385078a6d4809c3f374991231a
Reviewed-on: https://go-review.googlesource.com/c/go/+/255320
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Taking the live variable set from the last return point is problematic.
See #40629 for details, but there may not be a return point, or it may
be before the final defer.
Additionally, keeping track of the last call as a *Value doesn't quite
work. If it is dead-code eliminated, the storage for the Value is reused
for some other random instruction. Its live variable information,
if it is available at all, is wrong.
Instead, just mark all the open-defer argument slots as live
throughout the function. (They are already zero-initialized.)
Fixes#40742
Change-Id: Ie456c7db3082d0de57eaa5234a0f32525a1cce13
Reviewed-on: https://go-review.googlesource.com/c/go/+/247522
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
(cherry picked from commit 32a84c99e1)
Reviewed-on: https://go-review.googlesource.com/c/go/+/248621
Trust: Dmitri Shuralyov <dmitshur@golang.org>
checkptr has code to recognize &^ expressions, but it didn't take into
account that "p &^ x" gets rewritten to "p & ^x" during walk, which
resulted in false positive diagnostics.
This CL changes walkexpr to mark OANDNOT expressions with Implicit
when they're rewritten to OAND, so that walkCheckPtrArithmetic can
still recognize them later.
It would be slightly more idiomatic to instead mark the OBITNOT
expression as Implicit (as it's a compiler-generated Node), but the
OBITNOT expression might get constant folded. It's not worth the extra
complexity/subtlety of relying on n.Right.Orig, so we set Implicit on
the OAND node instead.
To atone for this transgression, I add documentation for nodeImplicit.
Updates #40917.
Fixes#40934.
Change-Id: I386304171ad299c530e151e5924f179e9a5fd5b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/249477
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
(cherry picked from commit e94544cf01)
Reviewed-on: https://go-review.googlesource.com/c/go/+/249879
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently in addLocalInductiveFacts, we only check whether
direct edge from if block to phi block exists. If not, the
following logic will treat the phi block as the first successor,
which is wrong.
This patch makes prove pass more conservative, so we disable
some cases in test/prove.go. We will do some optimization in
the following CL and enable these cases then.
Fixes#40367.
Change-Id: I27cf0248f3a82312a6f7dabe11c79a1a34cf5412
Reviewed-on: https://go-review.googlesource.com/c/go/+/244579
Reviewed-by: Zach Jones <zachj1@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
They were missed as part of the refactoring to use a separate
addressing modes pass.
Fixes#40426
Change-Id: Ie0418b2fac4ba1ffe720644ac918f6d728d5e420
Reviewed-on: https://go-review.googlesource.com/c/go/+/244859
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The ICE reported as #33308 was fixed by a related CL; this change adds
a regression test with the crasher.
Fixes#33308
Change-Id: I3260075dbe3823b56b8825e6269e57a0fad185a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/243458
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
It doesn't have to. The type in the aux field is authoritative.
There are cases involving casting from interface{} where pointers
have a placeholder pointer type (because the type is not known when
the IData op is generated).
The check was introduced in CL 13447.
Fixes#39459
Change-Id: Id77a57577806a271aeebd20bea5d92d08ee7aa6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/239817
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
reflect.assignTo writes to the target using write barriers. Make sure
that the memory it is writing to is zeroed, so the write barrier does
not read pointers from uninitialized memory.
Fixes#39541
Change-Id: Ia64b2cacc193bffd0c1396bbce1dfb8182d4905b
Reviewed-on: https://go-review.googlesource.com/c/go/+/238760
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These conversion instructions set the condition code and so should
be marked as clobbering flags.
Fixes#39651.
Change-Id: I91cc9687ea70ef0551bb3139c1875071c349d43e
Reviewed-on: https://go-review.googlesource.com/c/go/+/238628
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Make sure that if a field comparison might panic, we evaluate
(and short circuit if not equal) all previous fields, and don't
evaluate any subsequent fields.
Add a bunch more tests to the equality+panic checker.
Update #8606
Change-Id: I6a159bbc8da5b2b7ee835c0cd1fc565575b58c46
Reviewed-on: https://go-review.googlesource.com/c/go/+/237919
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The scheduler assumes two special invariants that apply to tuple
selectors (Select0 and Select1 ops):
1. There is only one tuple selector of each type per generator.
2. Tuple selectors and generators reside in the same block.
Prior to this CL the assumption was that these invariants would
only be broken by the CSE pass. The CSE pass therefore contained
code to move and de-duplicate selectors to fix these invariants.
However it is also possible to write relatively basic optimization
rules that cause these invariants to be broken. For example:
(A (Select0 (B))) -> (Select1 (B))
This rule could result in the newly added selector (Select1) being
in a different block to the tuple generator (see issue #38356). It
could also result in duplicate selectors if this rule matches
multiple times for the same tuple generator (see issue #39472).
The CSE pass will 'fix' these invariants. However it will only do
so when optimizations are enabled (since disabling optimizations
disables the CSE pass).
This CL moves the CSE tuple selector fixup code into its own pass
and makes it mandatory even when optimizations are disabled. This
allows tuple selectors to be treated like normal ops for most of
the compilation pipeline until after the new pass has run, at which
point we need to be careful to maintain the invariant again.
Fixes#39472.
Change-Id: Ia3f79e09d9c65ac95f897ce37e967ee1258a080b
Reviewed-on: https://go-review.googlesource.com/c/go/+/237118
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is a followup to CL 96495.
It should be simpler and more robust to achieve .bat files having
CRLF line endings by treating it as a binary file, like all other
files, and checking it in with the desired CRLF line endings.
A test is used to check the entire Go tree, short of directories
starting with "." and named "testdata", for any .bat files that
have anything other than strict CRLF line endings. This will help
catch any accidental modifications to existing .bat files or check
ins of new .bat files.
Importantly, this is compatible with how Gerrit serves .tar.gz files,
making it so that CRLF line endings are preserved.
The Go project is supported on many different environments, some of
which may have limited git implementations available, or none at all.
Relying on fewer git features and special rules makes it easier to
have confidence in the exact content of all files. Additionally, Go
development started in Subversion, moved to Perforce, then Mercurial,
and now uses Git.¹ Reducing its reliance on git-specific features will
help if there will be another transition in the project's future.
There are only 5 .bat files in the entire Go source tree, so a new one
being added is a rare event, and we prefer to do things in Go instead.
We still have the option of improving the experience for developers by
adding a pre-commit converter for .bat files to the git-codereview tool.
¹ https://groups.google.com/d/msg/golang-dev/sckirqOWepg/YmyT7dWJiocJFixes#39391.
For #37791.
Change-Id: I6e202216322872f0307ac96f1b8d3f57cb901e6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/236437
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Add interfaces which differ in type. Those used so far only
differ in value, not type.
These additional tests are needed to generate a failure
before CL 236278 went in.
Update #8606
Change-Id: Icdb7647b1973c2fff7e5afe2bd8b8c1b384f583e
Reviewed-on: https://go-review.googlesource.com/c/go/+/236418
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Make sure that we compare fields of structs and elements of arrays in order,
with proper short-circuiting.
Update #8606
Change-Id: I0a66ad92ea0af7bcc56dfdb275dec2b8d7e8b4fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/236147
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change fixes a race condition between beforeIdle waking up the
innermost event handler and a timer causing a different goroutine to
wake up at the exact same moment. This messes up the wasm event handling
and leads to memory corruption. The solution is to make beforeIdle
return the goroutine that must run next and have findrunnable pick
this goroutine without considering timers again.
Fixes#38093Fixes#38574
Change-Id: Iffbe99411d25c2730953d1c8b0741fd892f8e540
Reviewed-on: https://go-review.googlesource.com/c/go/+/230178
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 233857 fixed the underlying issue for #37246,
which had arisen again as #38916.
Add the test case from #37246 to ensure it stays fixed.
Fixes#37246
Change-Id: If7fd75a096d2ce4364dc15509253c3882838161d
Reviewed-on: https://go-review.googlesource.com/c/go/+/233941
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
When tuple generators and selectors are eliminated as part of the
CSE pass we may end up with tuple selectors that are in different
blocks to the tuple generators that they correspond to. This breaks
the invariant that tuple generators and their corresponding
selectors must be in the same block. Therefore after CSE this
situation must be corrected.
Unfortunately the fixup code did not take into account that selectors
could be eliminated by CSE. It assumed that only the tuple generators
could be eliminated. In some situations this meant that it got into
a state where it was replacing references to selectors with references
to dead selectors in the wrong block.
To fix this we move the fixup code after the CSE rewrites have been
applied. This removes any difficult-to-reason-about interactions
with the CSE rewriter.
Fixes#38916.
Change-Id: I2211982dcdba399d03299f0a819945b3eb93b291
Reviewed-on: https://go-review.googlesource.com/c/go/+/233857
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Taking over Zach's CL 212277. Just cleaned up and added a test.
For a positive, signed integer, an arithmetic right shift of count
(bit-width - 1) equals zero. e.g. int64(22) >> 63 -> 0. This CL makes
prove replace these right shifts with a zero-valued constant.
These shifts may arise in source code explicitly, but can also be
created by the generic rewrite of signed division by a power of 2.
// Signed divide by power of 2.
// n / c = n >> log(c) if n >= 0
// = (n+c-1) >> log(c) if n < 0
// We conditionally add c-1 by adding n>>63>>(64-log(c))
(first shift signed, second shift unsigned).
(Div64 <t> n (Const64 [c])) && isPowerOfTwo(c) ->
(Rsh64x64
(Add64 <t> n (Rsh64Ux64 <t>
(Rsh64x64 <t> n (Const64 <typ.UInt64> [63]))
(Const64 <typ.UInt64> [64-log2(c)])))
(Const64 <typ.UInt64> [log2(c)]))
If n is known to be positive, this rewrite includes an extra Add and 2
extra Rsh. This CL will allow prove to replace one of the extra Rsh with
a 0. That replacement then allows lateopt to remove all the unneccesary
fixups from the generic rewrite.
There is a rewrite rule to handle this case directly:
(Div64 n (Const64 [c])) && isNonNegative(n) && isPowerOfTwo(c) ->
(Rsh64Ux64 n (Const64 <typ.UInt64> [log2(c)]))
But this implementation of isNonNegative really only handles constants
and a few special operations like len/cap. The division could be
handled if the factsTable version of isNonNegative were available.
Unfortunately, the first opt pass happens before prove even has a
chance to deduce the numerator is non-negative, so the generic rewrite
has already fired and created the extra Ops discussed above.
Fixes#36159
By Printf count, this zeroes 137 right shifts when building std and cmd.
Change-Id: Iab486910ac9d7cfb86ace2835456002732b384a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/232857
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Improve the error user experience when users try to set/refer
to unexported fields and methods of struct literals, by directly saying
"cannot refer to unexported field or method"
Fixes#31053
Change-Id: I6fd3caf64b7ca9f9d8ea60b7756875e340792d59
Reviewed-on: https://go-review.googlesource.com/c/go/+/201657
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Omits printing the file:line:column when trying to
open non-existent files
Given:
go tool compile x.go
* Before:
x.go:0: open x.go: no such file or directory
* After:
open x.go: no such file or directory
Reverts the revert in CL 231043 by only fixing the case
of non-existent errors which is what the original bug
was about. The fix for "permission errors" will come later
on when I have bandwidth to investigate the differences
between running with root and why os.Open works for some
builders and not others.
Fixes#36437
Change-Id: I9c8a0981ad708b504bb43990a4105b42266fa41f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230941
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
match:
m = make([]T, x); copy(m, s)
for pointer free T and x==len(s) rewrite to:
m = mallocgc(x*elemsize(T), nil, false); memmove(&m, &s, x*elemsize(T))
otherwise rewrite to:
m = makeslicecopy([]T, x, s)
This avoids memclear and shading of pointers in the newly created slice
before the copy.
With this CL "s" is only be allowed to bev a variable and not a more
complex expression. This restriction could be lifted in future versions
of this optimization when it can be proven that "s" is not referencing "m".
Triggers 450 times during make.bash..
Reduces go binary size by ~8 kbyte.
name old time/op new time/op delta
MakeSliceCopy/mallocmove/Byte 71.1ns ± 1% 65.8ns ± 0% -7.49% (p=0.000 n=10+9)
MakeSliceCopy/mallocmove/Int 71.2ns ± 1% 66.0ns ± 0% -7.27% (p=0.000 n=10+8)
MakeSliceCopy/mallocmove/Ptr 104ns ± 4% 99ns ± 1% -5.13% (p=0.000 n=10+10)
MakeSliceCopy/makecopy/Byte 70.3ns ± 0% 68.0ns ± 0% -3.22% (p=0.000 n=10+9)
MakeSliceCopy/makecopy/Int 70.3ns ± 0% 68.5ns ± 1% -2.59% (p=0.000 n=9+10)
MakeSliceCopy/makecopy/Ptr 102ns ± 0% 99ns ± 1% -2.97% (p=0.000 n=9+9)
MakeSliceCopy/nilappend/Byte 75.4ns ± 0% 74.9ns ± 2% -0.63% (p=0.015 n=9+9)
MakeSliceCopy/nilappend/Int 75.6ns ± 0% 76.4ns ± 3% ~ (p=0.245 n=9+10)
MakeSliceCopy/nilappend/Ptr 107ns ± 0% 108ns ± 1% +0.93% (p=0.005 n=9+10)
Fixes#26252
Change-Id: Iec553dd1fef6ded16197216a472351c8799a8e71
Reviewed-on: https://go-review.googlesource.com/c/go/+/146719
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The {AND,OR,XOR}const ops can only take an int32 as an argument.
Make sure that when rewriting a BTx op to one of these, the result
has no high-order bits.
Fixes#38746
Change-Id: Ia7c5f76952329f60974bc033c29a5433610f3b28
Reviewed-on: https://go-review.googlesource.com/c/go/+/231977
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This reverts commit 4f7053c87f.
Reason for revert: Newly added test is failing on several builders.
Change-Id: I22dcbfebf2f57735b2f479886bbeb623f95b132f
Reviewed-on: https://go-review.googlesource.com/c/go/+/231043
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Omits printing the file:line:column when trying to open either
* non-existent files
* files without permission
Given:
go tool compile x.go
For either of x.go not existing, or if no read permissions:
* Before:
x.go:0: open x.go: no such file or directory
x.go:0: open x.go: permission denied
* After:
open x.go: no such file or directory
open x.go: permission denied
While here, noticed an oddity with the Linux builders, that appear
to always be running under root, hence the test for permission errors
with 0222 -W-*-W-*-W- can't pass on linux-amd64 builders.
The filed bug is #38608.
Fixes#36437
Change-Id: I9645ef73177c286c99547e3a0f3719fa07b35cb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/229357
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
We set up static symbols during walk that
we later make copies of to initialize local variables.
It is difficult to ascertain at that time exactly
when copying a symbol is profitable vs locally
initializing an autotmp.
During SSA, we are much better placed to optimize.
This change recognizes when we are copying from a
global readonly all-zero symbol and replaces it with
direct zeroing.
This often allows the all-zero symbol to be
deadcode eliminated at link time.
This is not ideal--it makes for large object files,
and longer link times--but it is the cleanest fix I could find.
This makes the final binary for the program in #38554
shrink from >500mb to ~2.2mb.
It also shrinks the standard binaries:
file before after Δ %
addr2line 4412496 4404304 -8192 -0.186%
buildid 2893816 2889720 -4096 -0.142%
cgo 4841048 4832856 -8192 -0.169%
compile 19926480 19922432 -4048 -0.020%
cover 5281816 5277720 -4096 -0.078%
link 6734648 6730552 -4096 -0.061%
nm 4366240 4358048 -8192 -0.188%
objdump 4755968 4747776 -8192 -0.172%
pprof 14653060 14612100 -40960 -0.280%
trace 11805940 11777268 -28672 -0.243%
vet 7185560 7181416 -4144 -0.058%
total 113588440 113465560 -122880 -0.108%
And not just by removing unnecessary symbols;
the program text shrinks a bit as well.
Fixes#38554
Change-Id: I8381ae6084ae145a5e0cd9410c451e52c0dc51c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/229704
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
This CL uses fixVariadicCall before escape analyzing function calls.
This has a number of benefits, though also some minor obstacles:
Most notably, it allows us to remove ODDDARG along with the logic
involved in setting it up, manipulating EscHoles, and later copying
its escape analysis flags to the actual slice argument. Instead, we
uniformly handle all variadic calls the same way. (E.g., issue31573.go
is updated because now f() and f(nil...) are handled identically.)
It also allows us to simplify handling of builtins and generic
function calls. Previously handling of calls was hairy enough to
require multiple dispatches on n.Op, whereas now the logic is uniform
enough that we can easily handle it with a single dispatch.
The downside is handling //go:uintptrescapes is now somewhat clumsy.
(It used to be clumsy, but it still is, too.) The proper fix here is
probably to stop using escape analysis tags for //go:uintptrescapes
and unsafe-uintptr, and have an earlier pass responsible for them.
Finally, note that while we now call fixVariadicCall in Escape, we
still have to call it in Order, because we don't (yet) run Escape on
all compiler-generated functions. In particular, the generated "init"
function for initializing package-level variables can contain calls to
variadic functions and isn't escape analyzed.
Passes toolstash-check -race.
Change-Id: I4cdb92a393ac487910aeee58a5cb8c1500eef881
Reviewed-on: https://go-review.googlesource.com/c/go/+/229759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Triggers a handful of times in std+cmd.
Change-Id: I9bb8ce9a5f8bae2547cb61157cd8f256e1b63e76
Reviewed-on: https://go-review.googlesource.com/c/go/+/229602
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL optimizes code that uses a carry from a function such as
bits.Add64 as the condition in an if statement. For example:
x, c := bits.Add64(a, b, 0)
if c != 0 {
panic("overflow")
}
Rather than converting the carry into a 0 or a 1 value and using
that as an input to a comparison instruction the carry flag is now
used as the input to a conditional branch directly. This typically
removes an ADD LOGICAL WITH CARRY instruction when user code is
doing overflow detection and is closer to the code that a user
would expect to generate.
Change-Id: I950431270955ab72f1b5c6db873b6abe769be0da
Reviewed-on: https://go-review.googlesource.com/c/go/+/219757
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Previously for a method value "x.M", we always flowed x directly to
the heap, which led to the receiver argument generally needing to be
heap allocated.
This CL changes it to flow x to the closure and M's receiver
parameter. This allows receiver arguments to be stack allocated as
long as (1) the closure never escapes, *and* (2) method doesn't leak
its receiver parameter.
Within the standard library, this allows a handful of objects to be
stack allocated instead. Listed here are diagnostics that were
previously emitted by "go build -gcflags=-m std cmd" that are no
longer emitted:
archive/tar/writer.go:118:6: moved to heap: f
archive/tar/writer.go:208:6: moved to heap: f
archive/tar/writer.go:248:6: moved to heap: f
cmd/compile/internal/gc/initorder.go:252:2: moved to heap: d
cmd/compile/internal/gc/initorder.go:75:2: moved to heap: s
cmd/go/internal/generate/generate.go:206:7: &Generator literal escapes to heap
cmd/internal/obj/arm64/asm7.go:910:2: moved to heap: c
cmd/internal/obj/mips/asm0.go:415:2: moved to heap: c
cmd/internal/obj/pcln.go:294:22: new(pcinlineState) escapes to heap
cmd/internal/obj/s390x/asmz.go:459:2: moved to heap: c
crypto/tls/handshake_server.go:56:2: moved to heap: hs
Thanks to Cuong Manh Le for help coming up with this solution.
Fixes#27557.
Change-Id: I8c85d671d07fb9b53e11d2dd05949a34dbbd7e17
Reviewed-on: https://go-review.googlesource.com/c/go/+/228263
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When generating code for unsigned equals (==) and not equals (!=)
comparisons we currently, on s390x, always use signed comparisons.
This mostly works well, however signed comparisons on s390x sign
extend their immediates and unsigned comparisons zero extend them.
For compare-and-branch instructions which can only have 8-bit
immediates this significantly changes the range of immediate values
we can represent: [-128, 127] for signed comparisons and [0, 255]
for unsigned comparisons.
When generating equals and not equals checks we don't neet to worry
about whether the comparison is signed or unsigned. This CL
therefore adds rules to allow us to switch signedness for such
comparisons if it means that it brings a constant into range for an
8-bit immediate.
For example, a signed equals with an integer in the range [128, 255]
will now be implemented using an unsigned compare-and-branch
instruction rather than separate compare and branch instructions.
As part of this change I've also added support for adding a name
to block control values using the same `x:(...)` syntax we use for
value rules.
Triggers 792 times when compiling cmd and std.
Change-Id: I77fa80a128f0a8ce51a2888d1e384bd5e9b61a77
Reviewed-on: https://go-review.googlesource.com/c/go/+/228642
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Thie CL changes cmd/compile/internal/syntax to give the gc half of
the compiler more control over pragma handling, so that it can prepare
better errors, diagnose misuse, and so on. Before, the API between
the two was hard-coded as a uint16. Now it is an interface{}.
This should set us up better for future directives.
In addition to the split, this CL emits a "misplaced compiler directive"
error for any directive that is in a place where it has no effect.
I've certainly been confused in the past by adding comments
that were doing nothing and not realizing it. This should help
avoid that kind of confusion.
The rule, now applied consistently, is that a //go: directive
must appear on a line by itself immediately before the declaration
specifier it means to apply to. See cmd/compile/doc.go for
precise text and test/directive.go for examples.
This may cause some code to stop compiling, but that code
was broken. For example, this code formerly applied the
//go:noinline to f (not c) but now will fail to compile:
//go:noinline
const c = 1
func f() {}
Change-Id: Ieba9b8d90a27cfab25de79d2790a895cefe5296f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228578
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This optimization works on any integer with exactly one bit set.
This is identical to being a power of two, except in the
most negative number. Use oneBit instead.
The rule now triggers in a few more places in std+cmd,
in packages encoding/asn1, crypto/elliptic, and
vendor/golang.org/x/crypto/cryptobyte.
This change obviates the need for CL 222479
by doing this optimization consistently in the compiler.
Change-Id: I983c6235290fdc634fda5e11b10f1f8ce041272f
Reviewed-on: https://go-review.googlesource.com/c/go/+/229124
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
reflect.Type.Method (and MethodByName) can be used to obtain a
reference of a method by reflection. The linker needs to know
if reflect.Type.Method is called, and retain all exported methods
accordingly. This is handled by the compiler, which marks the
caller of reflect.Type.Method with REFLECTMETHOD attribute. The
current code failed to handle the reflect package itself, so the
method wrapper reflect.Type.Method is not marked. This CL fixes
it.
Fixes#38515.
Change-Id: I12904d23eda664cf1794bc3676152f3218fb762b
Reviewed-on: https://go-review.googlesource.com/c/go/+/228880
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
