A method is more in keeping with the rest of the Writer API and
incidentally allows the comment error to be reported earlier.
Fixes#22737.
Change-Id: I1eee2103a0720c76d0c394ccd6541e6219996dc0
Reviewed-on: https://go-review.googlesource.com/79415
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
If there are no more requests being made, wait to shut down
the response-writing codec until the pending requests are all
answered.
Fixes#17239.
Change-Id: Ie62c63ada536171df4e70b73c95f98f778069972
Reviewed-on: https://go-review.googlesource.com/79515
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Thanks to coypoop for noticing at:
https://github.com/golang/go/issues/22914#issuecomment-347761838
FreeBSD/386 and NetBSD/386 diverged between Go 1.4 and Go 1.5 when
Russ sent https://golang.org/cl/135830043 (git rev 25f6b02ab0)
to change the calling convention of the C compilers to match Go.
But netbsd wasn't updated.
Tested on a NetBSD/386 VM, since the builders aren't back up yet (due
to this bug)
Fixes#22914
Updates #19339
Updates #20852
Updates #16511
Change-Id: Id76ebe8f29bcc85e39b1c11090639d906cd6cf04
Reviewed-on: https://go-review.googlesource.com/80515
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When -test.failfast flag is provided to go test,
no new tests get started after the first failure.
Fixes#21700
Change-Id: I0092e72f25847af05e7c8e1b811dcbb65a00cbe7
Reviewed-on: https://go-review.googlesource.com/74450
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Due to err being shadowed in the else brach, the actual err return of
fd1.Chdir() is never checked. Fix it by not shadowing err anymore.
Change-Id: I9f1d52e88d8bc9a1c035960aa7af9f5224a63ab0
Reviewed-on: https://go-review.googlesource.com/80556
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Follow CL 75810 which did the same for x/sys/unix.
Change-Id: I6314a97989631d589369c7b6001d1523ec2cc242
Reviewed-on: https://go-review.googlesource.com/80555
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There were too many changes of direction. Tidy up the intro a little
for better flow, and delete some unnecessary comments.
Change-Id: Ib5d85c0992626bd3152f86a51585884d3e0cab72
Reviewed-on: https://go-review.googlesource.com/80495
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Binary import sometimes constructs nodes using functions
that use the global lineno for the Position. This causes
spurious numbers to appear in the assembly and the
debugging output.
Fix (targeted, because late in the cycle): save and restore
lineno around bimport calls known to use lineno-sensitive
functions.
Updates #22600.
(Comment: "This is a weird line to step through")
Change-Id: I9c4094670380609fe4b6696443fb02579521c596
Reviewed-on: https://go-review.googlesource.com/80115
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
typenod is only used for anonymous types, which don't logically have
position information.
Passes toolstash-check.
Updates #19683.
Change-Id: I505424ae980b88c7deed5f23502c3cecb3dc0702
Reviewed-on: https://go-review.googlesource.com/80298
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This change drops the support for FreeBSD 9 or below and simplifies
platform-dependent code for the sake of maintenance.
Updates #7187.
Fixes#11412.
Updates #16064.
Updates #18854.
Fixes#19072.
Change-Id: I9129130aafbfc7d0d7e9b674b6fc6cb31b7381be
Reviewed-on: https://go-review.googlesource.com/64910
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Apparently 4 kB is not enough for some people.
Fixes#21674.
Change-Id: If39eeb225d548b578560939f6ce51e31060f5aff
Reviewed-on: https://go-review.googlesource.com/79516
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TestGdbAutotmpTypes times out for unknown reasons on NetBSd. Skip the
gdb tests on NetBSD for now.
Updates #22893
Change-Id: Ibb05b7260eabb74d805d374b25a43770939fa5f2
Reviewed-on: https://go-review.googlesource.com/80136
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Panic if an http Handler does:
rw.WriteHeader(0)
... or other invalid values. (for a forgiving range of valid)
I previously made it kinda work in https://golang.org/cl/19130 but
there's no good way to fake it in HTTP/2, and we want HTTP/1 and
HTTP/2 behavior to be the same, regardless of what programs do.
Currently HTTP/2 omitted the :status header altogether, which was a
protocol violation. In fixing that, I found CL 19130 added a test
about bogus WriteHeader values with the comment:
// This might change at some point, but not yet in Go 1.6.
This now changes. Time to be strict.
Updates golang/go#228800
Change-Id: I20eb6c0e514a31f4bba305ac4c24266f39b95fd5
Reviewed-on: https://go-review.googlesource.com/80077
Reviewed-by: Tom Bergan <tombergan@google.com>
Previously, golang.org/cl/75350 updated ReadMIMEHeader to ignore the
first header line when it begins with a leading space, as in the
following example:
GET / HTTP/1.1
Host: foo.com
Accept-Encoding: gzip
However, golang.org/cl/75350 changed ReadMIMEHeader's behavior for the
following example: before the CL it returned an error, but after the
CL it ignored the first line.
GET / HTTP/1.1
Host foo.com
Accept-Encoding: gzip
This change updates ReadMIMEHeader to always fail when the first header
line starts with a space. During the discussion for golang.org/cl/75350,
we realized we had three competing needs:
1. HTTP clients should accept malformed response headers when possible
(ignoring the malformed lines).
2. HTTP servers should reject all malformed request headers.
3. The net/textproto package is used by multiple protocols (most notably,
HTTP and SMTP) which have slightly different parsing semantics. This
complicates changes to net/textproto.
We weren't sure how to best fix net/textproto without an API change, but
it is too late for API changes in Go 1.10. We decided to ignore initial
lines that begin with spaces, thinking that would have the least impact on
existing users -- malformed headers would continue to parse, but the
initial lines would be ignored. Instead, golang.org/cl/75350 actually
changed ReadMIMEHeader to succeed in cases where it previously failed
(as in the above example).
Reconsidering the above two examples, there does not seem to be a good
argument to silently ignore ` Host: foo.com` but fail on ` Host foo.com`.
Hence, this change fails for *all* headers where the initial line begins
with a space.
Updates #22464
Change-Id: I68d3d190489c350b0bc1549735bf6593fe11a94c
Reviewed-on: https://go-review.googlesource.com/80055
Run-TryBot: Tom Bergan <tombergan@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It was added in CL 79995. It is unnecessarily confusing.
Change-Id: Ib8ff35b9f71b54ff99d2d6e0534c7128e1f4345a
Reviewed-on: https://go-review.googlesource.com/80035
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Found a few functions in cmd/compile that aren't used.
Change-Id: I53957dae6f1a645feb8b95383f0f050964b4f7d4
Reviewed-on: https://go-review.googlesource.com/79975
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The comment for phase 2 of checker.interfaceType (typexpr.go:517)
requires that embedded interfaces be complete for correctness of
the algorithm.
Yet, the very next comment (typexpr.go:530) states that underlying
embedded interfaces may in fact be incomplete.
This is in fact the case and the underlying bug in issue #18395.
This change makes sure that new interface types are marked complete
when finished (per the implicit definition in Interface.Complete,
type.go:302). It also adds a check, enabled in debug mode only, to
detect the use of incomplete embedded interfaces during construction
of a new interface. In debug mode, this check fails for the testcase
in the issue (and several others).
This change has no noticeable impact with debug mode disabled.
For #18395.
Change-Id: Ibb81e47257651282fb3755a80a36ab5d392e636d
Reviewed-on: https://go-review.googlesource.com/78955
Reviewed-by: Alan Donovan <adonovan@google.com>
Branch cuts for the elementary complex functions along real or imaginary axes
should be resolved in floating point calculations by one-sided continuity with
signed zero as described in:
"Branch Cuts for Complex Elementary Functions or Much Ado About Nothing's Sign Bit"
W. Kahan
Available at: https://people.freebsd.org/~das/kahan86branch.pdf
And as described in the C99 standard which is claimed as the original cephes source.
Sqrt did not return the correct branch when imag(x) == 0. The branch is now
determined by sign(imag(x)). This incorrect branch choice was affecting the behavior
of the Trigonometric/Hyperbolic functions that use Sqrt in intermediate calculations.
Asin, Asinh and Atan had spurious domain checks, whereas the functions should be valid
over the whole complex plane with appropriate branch cuts.
Fixes#6888
Change-Id: I9b1278af54f54bfb4208276ae345bbd3ddf3ec83
Reviewed-on: https://go-review.googlesource.com/46492
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It appears that TransmitFile Windows API does not work with Windows
pipes. So just copy data from pipe and into TCP connection manually.
Fixes#22278
Change-Id: I4810caca5345eac5bffb3176956689b8ae993256
Reviewed-on: https://go-review.googlesource.com/79775
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
ASN.1 has an specific string type, called NumericString (tag 18). The
value of this type can be numeric characters (0-9) and space.
Fixes#22396
Change-Id: Ia6d81ab7faa311ff22759bf76862626974d3013e
Reviewed-on: https://go-review.googlesource.com/78655
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Only a last sentence of A Tour of Go is shifting to the left.
I fixed a HTML tag order according to other sentences it.
Change-Id: I6a301178d15db893f596b8da80a4d98721160386
Reviewed-on: https://go-review.googlesource.com/79856
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
exitsyscall should be recursively nosplit, but we don't have a way to
annotate that right now (see #21314). There's exactly one remaining
place where this is violated right now: exitsyscall -> casgstatus ->
print. The other prints in casgstatus are wrapped in systemstack
calls. This fixes the remaining print.
Updates #21431 (in theory could fix it, but that would just indicate
that we have a different G status-related crash and we've *never* seen
that failure on the dashboard.)
Change-Id: I9a5e8d942adce4a5c78cfc6b306ea5bda90dbd33
Reviewed-on: https://go-review.googlesource.com/79815
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use singular form of panic and remove the unnecessary
'however', when comparing Goexit's behavior to 'a panic'
as well as what happens for deferred recovers with Goexit.
Change-Id: I3116df3336fa135198f6a39cf93dbb88a0e2f46e
Reviewed-on: https://go-review.googlesource.com/79755
Reviewed-by: Rob Pike <r@golang.org>
Following comments on CL 76320.
Breaks Cmd.Std{out,err} doc into three paragraphs and updates Cmd.Stdin
formatting to match.
Fixes an erroneous reference to Stdin in the output goroutine comment, while
keeping the wording consistent between Stdin and Stdout/Stderr.
Change-Id: I186a0e2d4b85dfb939443a17e62a1eb2ef64b1bf
Reviewed-on: https://go-review.googlesource.com/79595
Reviewed-by: Rob Pike <r@golang.org>
dragonfly/386 isn't a valid GOOS/GOARCH pair and there are no generated
files for this pair in syscall.
Change-Id: Ibea2103c2f5e139139d850df3aac9b5a9c4ac9ab
Reviewed-on: https://go-review.googlesource.com/79675
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 79555 added TestLookupLongTXT. However, this test is
failing on Plan 9, because the DNS resolver (ndb/dns)
only returns a single TXT record.
Updates #22857.
Change-Id: I33cdc63a3d3de4d1c7f2684934316c44992fb9e2
Reviewed-on: https://go-review.googlesource.com/79695
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add an explanation of why sigtrampgo is nosplit.
Updates #21314.
Change-Id: I3f5909d2b2c180f9fa74d53df13e501826fd4316
Reviewed-on: https://go-review.googlesource.com/79615
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The response to a TXT lookup is a sequence of RRs,
each of which contains a sequence of string fragments.
The correct handling of the response is to do:
for each rr {
list = append(list, strings.Join(rr.fragments, ""))
}
(like in at dnsRR_TXT.Walk, used on most platforms).
The Windows code incorrectly does:
for each rr {
list = append(list, rr.fragments...)
}
This CL fixes it to concatenate fragments, as it must.
Fixes#21472.
Change-Id: I78cce96f172e5e90da9a212b0343457f6d5f92e8
Reviewed-on: https://go-review.googlesource.com/79555
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
At least some versions of the Android libc do not define posix_openpt.
Updates #22845
Change-Id: Id21705f47ef0f9694313a7dc7351a952d48d407b
Reviewed-on: https://go-review.googlesource.com/79399
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add test that verifies that go command produces executable
that have security attributes of the target directory.
Update #22343
Change-Id: Ieab02381927a2b09bee21c49c043b3298bd088e6
Reviewed-on: https://go-review.googlesource.com/78215
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This doesn't appear to have caused problems (because we don't depend
on the sort order, it seems) but it's clearly incorrect.
Change-Id: Ib6eb0128a3c17997c7907a618f9ce102b32aaa98
Reviewed-on: https://go-review.googlesource.com/79497
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
newstack manually prints the stack trace if we try to grow the stack
when throwsplit is set. However, the default behavior is to omit
runtime frames. Since runtime frames can be critical to understanding
this crash, this change fixes this traceback to include them.
Updates #21431.
Change-Id: I5aa43f43aa2f10a8de7d67bcec743427be3a3b5d
Reviewed-on: https://go-review.googlesource.com/79518
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If exitsyscall tries to grow the stack it will panic, but throw calls
print, which can grow the stack. Move the two bare throws in
exitsyscall to the system stack.
Updates #21431.
Change-Id: I5b29da5d34ade908af648a12075ed327a864476c
Reviewed-on: https://go-review.googlesource.com/79517
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In golang.org/cl/74352, the print rules were overhauled to give better
error messages. This also meant adding a regex to find and extract the
used formatting verbs.
However, %v was missed. Add it to the expression, and add a test too.
Fixes#22847.
Change-Id: If117cc364db0cb91373742239b8a626c137642b0
Reviewed-on: https://go-review.googlesource.com/79455
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
