Currently the code for completion of mark 1/mark 2 is duplicated in
background workers and assists. Factor this in to a single function
that will serve as the transition function for concurrent mark.
Change-Id: I4d9f697a15da0d349db3b34d56f3a220dd41d41b
Reviewed-on: https://go-review.googlesource.com/16359
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, findRunnableGCWorker will perform mark completion if there
is no remaining work and no running workers. This used to be necessary
to resolve a race in the transition from mark 1 to mark 2 where we
would enter mark 2 with no mark work (and no dedicated workers), so no
workers would run, so no worker would signal mark completion.
However, we're about to make mark completion also perform the entire
follow-on process, which includes mark termination. We really don't
want to do that in the scheduler if it happens to detect completion.
Conveniently, this hack is no longer necessary because we always
enqueue root scanning work at the beginning of both mark 1 and mark 2,
so a mark worker will always run. Hence, we can simply eliminate it.
Change-Id: I3fc8f27c8da632f0fb732c9f6425e1f457f5652e
Reviewed-on: https://go-review.googlesource.com/16358
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, we don't start dedicated or fractional mark workers unless
the mark 1 or mark 2 barriers have been cleared. One intended
consequence of this is that no background workers run between the
forEachP that disposes all gcWork caches and the beginning of mark 2.
However, we (unintentionally) did not apply this restriction to idle
mark workers. As a result, these can start in the interim between mark
1 completion and mark 2 starting. This explains why it was necessary
to reset the root marking jobs using carefully ordered atomic writes
when setting up mark 2. It also means that, even though we definitely
enqueue work before starting mark 2, it may be drained by the time we
reset the mark 2 barrier. If this happens, currently the only thing
preventing the runtime from deadlocking is that the scheduler itself
also checks for mark completion and will signal mark 2 completion.
Were it not for the odd behavior of idle workers, this check in the
scheduler would not be necessary.
Clean all of this up and prepare to remove this check in the scheduler
by applying the same restriction to starting idle mark workers.
Change-Id: Ic1b479e1591bd7773dc27b320ca399a215603b5a
Reviewed-on: https://go-review.googlesource.com/16631
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This moves all of GC initialization, sweep termination, and the
transition to concurrent marking in to the off->mark transition
function. This means it's now handled on the goroutine that detected
the state exit condition.
As a result, malloc no longer needs to Gosched() at the beginning of
the GC cycle to prevent over-allocation while the GC is starting up
because it will now *help* the GC to start up. The Gosched hack is
still necessary during GC shutdown (this is easy to test by enabling
gctrace and hitting Ctrl-S to block the gctrace output).
At this point, the GC coordinator still handles later phases. This
requires a small tweak to how we start the GC coordinator. Currently,
starting the GC coordinator is best-effort and may fail if the
coordinator is about to park from the previous cycle but hasn't yet.
We fix this by replacing the park/ready to wake up the coordinator
with a semaphore. This is temporary since the coordinator will be
going away in a few commits.
Updates #11970.
Change-Id: I2c6a11c91e72dfbc59c2d8e7c66146dee9a444fe
Reviewed-on: https://go-review.googlesource.com/16357
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This moves concurrent sweep termination from the coordinator to the
off->mark transition. This allows it to be performed by all Gs
attempting to start the GC.
Updates #11970.
Change-Id: I24428e8599a759398c2ef7ec996ba755a448f947
Reviewed-on: https://go-review.googlesource.com/16356
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This begins the conversion of the centralized GC coordinator to a
decentralized state machine by introducing the internal API that
triggers the first state transition from _GCoff to _GCmark (or
_GCmarktermination).
This change introduces the transition lock, the off->mark transition
condition (which is very similar to shouldtriggergc()), and the
general structure of a state transition. Since we're doing this
conversion in stages, it then falls back to the GC coordinator to
actually execute the cycle. We'll start moving logic out of the GC
coordinator and in to transition functions next.
This fixes a minor bug in gcstoptheworld debug mode where passing the
heap trigger once could trigger multiple STW GCs.
Updates #11970.
Change-Id: I964087dd190a639eb5766398f8e1bbf8b352902f
Reviewed-on: https://go-review.googlesource.com/16355
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
For historical reasons we currently do a lot of the concurrent mark
setup on the system stack. In fact, at this point the one and only
thing that needs to happen on the system stack is the start-the-world.
Clean up this code by lifting everything other than the
start-the-world off the system stack.
The diff for this change looks large, but the only code change is to
narrow the systemstack call. Everything else is re-indentation.
Change-Id: I1e03b8afc759fad726f2397b05a17d183c2713ce
Reviewed-on: https://go-review.googlesource.com/16354
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We're about to split func gc across several functions, so lift the
local variables it uses for tracking statistics and state across the
cycle into the global "work" variable.
Change-Id: Ie955f2f1758c7f5a5543ea1f3f33b222bc4b1d37
Reviewed-on: https://go-review.googlesource.com/16353
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Put 'r' first because that is the command, and 'c' is the modifier.
Keep 'c' because it means to not warn when creating an archive.
Drop 'u' because it is unnecessary and fails on Arch Linux.
No test because this is only for gccgo (I tested it manually).
Fixes#12310.
Change-Id: Id740257fb1c347dfaa60f7d613af2897dae2c059
Reviewed-on: https://go-review.googlesource.com/16664
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This change removes the retry mechanism we use for buffered channels.
Instead, any sender waking up a receiver or vice versa completes the
full protocol with its counterpart. This means the counterpart does
not need to relock the channel when it wakes up. (Currently
buffered channels need to relock on wakeup.)
For sends on a channel with waiting receivers, this change replaces
two copies (sender->queue, queue->receiver) with one (sender->receiver).
For receives on channels with a waiting sender, two copies are still required.
This change unifies to a large degree the algorithm for buffered
and unbuffered channels, simplifying the overall implementation.
Fixes#11506
benchmark old ns/op new ns/op delta
BenchmarkChanProdCons10 125 110 -12.00%
BenchmarkChanProdCons0 303 284 -6.27%
BenchmarkChanProdCons100 75.5 71.3 -5.56%
BenchmarkChanContended 6452 6125 -5.07%
BenchmarkChanNonblocking 11.5 11.0 -4.35%
BenchmarkChanCreation 149 143 -4.03%
BenchmarkChanSem 63.6 61.6 -3.14%
BenchmarkChanUncontended 6390 6212 -2.79%
BenchmarkChanSync 282 276 -2.13%
BenchmarkChanProdConsWork10 516 506 -1.94%
BenchmarkChanProdConsWork0 696 685 -1.58%
BenchmarkChanProdConsWork100 470 469 -0.21%
BenchmarkChanPopular 660427 660012 -0.06%
Change-Id: I164113a56432fbc7cace0786e49c5a6e6a708ea4
Reviewed-on: https://go-review.googlesource.com/9345
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
While here, enable getrandom on arm64 too (using the value found in
include/uapi/asm-generic/unistd.h, which seems to match up with other
GOARCH=arm64 syscall numbers).
Updates #10848.
Change-Id: I5ab36ccf6ee8d5cc6f0e1a61d09f0da7410288b9
Reviewed-on: https://go-review.googlesource.com/16662
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently dedicated mark workers participate in the getfull barrier
during concurrent mark. However, the getfull barrier wasn't designed
for concurrent work and this causes no end of headaches.
In the concurrent setting, participants come and go. This makes mark
completion susceptible to live-lock: since dedicated workers are only
periodically polling for completion, it's possible for the program to
be in some transient worker each time one of the dedicated workers
wakes up to check if it can exit the getfull barrier. It also
complicates reasoning about the system because dedicated workers
participate directly in the getfull barrier, but transient workers
must instead use trygetfull because they have exit conditions that
aren't captured by getfull (e.g., fractional workers exit when
preempted). The complexity of implementing these exit conditions
contributed to #11677. Furthermore, the getfull barrier is inefficient
because we could be running user code instead of spinning on a P. In
effect, we're dedicating 25% of the CPU to marking even if that means
we have to spin to make that 25%. It also causes issues on Windows
because we can't actually sleep for 100µs (#8687).
Fix this by making dedicated workers no longer participate in the
getfull barrier. Instead, dedicated workers simply return to the
scheduler when they fail to get more work, regardless of what others
workers are doing, and the scheduler only starts new dedicated workers
if there's work available. Everything that needs to be handled by this
barrier is already handled by detection of mark completion.
This makes the system much more symmetric because all workers and
assists now use trygetfull during concurrent mark. It also loosens the
25% CPU target so that we can give some of that 25% back to user code
if there isn't enough work to keep the mark worker busy. And it
eliminates the problematic 100µs sleep on Windows during concurrent
mark (though not during mark termination).
The downside of this is that if we hit a bottleneck in the heap graph
that then expands back out, the system may shut down dedicated workers
and take a while to start them back up. We'll address this in the next
commit.
Updates #12041 and #8687.
No effect on the go1 benchmarks. This slows down the garbage benchmark
by 9%, but we'll more than make it up in the next commit.
name old time/op new time/op delta
XBenchGarbage-12 5.80ms ± 2% 6.32ms ± 4% +9.03% (p=0.000 n=20+20)
Change-Id: I65100a9ba005a8b5cf97940798918672ea9dd09b
Reviewed-on: https://go-review.googlesource.com/16297
Reviewed-by: Rick Hudson <rlh@golang.org>
The existing go_darwin_arm_exec.go script does not work with Xcode 7,
not due to any significant changes, but just ordering and timing of
statements from lldb. Unfortunately the current design of
go_darwin_arm_exec.go makes it not obvious what gets stuck where, so
this moves from a moving buffer window to a complete buffer of the
lldb output.
The result is easier code to follow, and it works with Xcode 7.
Updates #12660.
Change-Id: I3b8b890b0bf4474119482e95d84e821a86d1eaed
Reviewed-on: https://go-review.googlesource.com/16634
Reviewed-by: Michael Matloob <matloob@golang.org>
Noticed from nacl trybot failures on new tests in
https://golang.org/cl/16630
Related earlier fix of mine to nacl's listen code:
syscall: fix nacl listener to not accept connections once closed
https://go-review.googlesource.com/15940
Perhaps a better fix (in the future?) would be to remove the listener
from the map at close, but that didn't seem entirely straightforward
last time I looked into it. It's not my code, but it seems that the
map entry continues to have a purpose even after Listener close. (?)
But given that this code is only really used for running tests and the
playground, this seems fine.
Change-Id: I43bfedc57c07f215f4d79c18f588d3650687a48f
Reviewed-on: https://go-review.googlesource.com/16650
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fix for iOS builder.
Change-Id: I5b6c977b187446c848182a9294d5bed6b5f9f6e4
Reviewed-on: https://go-review.googlesource.com/16633
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Unification of implementation of existing md5.Write function
with other implementations (sha1, sha256, sha512).
Change-Id: I58ae02d165b17fc221953a5b4b986048b46c0508
Reviewed-on: https://go-review.googlesource.com/16621
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
builder.copyFile ensures that the destination is an object file. This
wouldn't be true if we are not writing to a regular file and the copy
fails. Check if the destination is an object file only if we are
writing to a regular file. While removing the file, ensure that it is a
regular file so that device files and such aren't removed when running
as a user with suggicient privileges.
Fixes#12407
Change-Id: Ie86ce9770fa59aa56fc486a5962287859b69db3d
Reviewed-on: https://go-review.googlesource.com/16585
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This introduces a recursive variant of the go:nowritebarrier
annotation that prohibits write barriers not only in the annotated
function, but in all functions it calls, recursively. The error
message gives the shortest call stack from the annotated function to
the function containing the prohibited write barrier, including the
names of the functions and the line numbers of the calls.
To demonstrate the annotation, we apply it to gcmarkwb_m, the write
barrier itself.
This is a new annotation rather than a modification of the existing
go:nowritebarrier annotation because, for better or worse, there are
many go:nowritebarrier functions that do call functions with write
barriers. In most of these cases this is benign because the annotation
was conservative, but it prohibits simply coopting the existing
annotation.
Change-Id: I225ca483c8f699e8436373ed96349e80ca2c2479
Reviewed-on: https://go-review.googlesource.com/16554
Reviewed-by: Keith Randall <khr@golang.org>
The code works without the newline, but it looks funny:
func _cgoexp_15afe6549f62_GoFn(a unsafe.Pointer, n int32) { fn := GoFn
This adds a newline after the '{'.
Change-Id: I6c465abe16f47924426d1b22b91004b3a3586ebd
Reviewed-on: https://go-review.googlesource.com/16612
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Server's server goroutine was panicing (but recovering) when
cleaning up after handling a request. It was pretty harmless (it just
closed that one connection and didn't kill the whole process) but it
was distracting.
Updates #13135
Change-Id: I2a0ce9e8b52c8d364e3f4ce245e05c6f8d62df14
Reviewed-on: https://go-review.googlesource.com/16572
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The width of the type of an external variable defined with a type
literal may not be set when the instrumentation pass is run. There are
two cases in the standard library that fail without the call to dowidth:
../../../src/encoding/base32/base32.go:322: constant -1000000000 overflows uintptr
../../../src/encoding/base32/base32.go:329: constant -1000000000 overflows uintptr
../../../src/encoding/json/encode.go:385: constant -1000000000 overflows uintptr
../../../src/encoding/json/encode.go:387: constant -1000000000 overflows uintptr
Change-Id: I7c3334f7decdb7488595ffe4090cd262d7334283
Reviewed-on: https://go-review.googlesource.com/16331
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
On older versions of GCC we need to pass a file name before GCC will
report an unrecognized option.
Fixes#13065.
Change-Id: I7ed34c01a006966a446059025f7d10235c649072
Reviewed-on: https://go-review.googlesource.com/16589
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Handling of special records for tiny allocations has two problems:
1. Once we queue a finalizer we mark the object. As the result any
subsequent finalizers for the same object will not be queued
during this GC cycle. If we have 16 finalizers setup (the worst case),
finalization will take 16 GC cycles. This is what caused misbehave
of tinyfin.go. The actual flakiness was caused by the fact that fing
is asynchronous and don't always run before the check.
2. If a tiny block has both finalizer and profile specials,
it is possible that we both queue finalizer, preserve the object live
and free the profile record. As the result heap profile can be skewed.
Fix both issues by analyzing all special records for a single object at once.
Also, make tinyfin test stricter and remove reliance on real time.
Also, add a test for the problem 2. Currently heap profile missed about
a half of live memory.
Fixes#13100
Change-Id: I9ae4dc1c44893724138a4565ca5cae29f2e97544
Reviewed-on: https://go-review.googlesource.com/16591
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Currently the GC work buffers are only 256 bytes and hence can record
only 24 64-bit pointer. They were reduced from 4K in commits db7fd1c
and a15818f as a way to minimize the amount of work the per-P workbuf
caches could "hide" from the mark phase and carry in to the mark
termination phase. However, this approach wasn't very robust and we
later added a "mark 2" phase to address this problem head-on.
Because of mark 2, there's now no benefit to having very small work
buffers. But there are plenty of downsides: small work buffers
increase contention on the work lists, increase the frequency and
hence net overhead of acquiring and releasing work buffers, and
somewhat increase memory overhead of the GC.
This commit expands work buffers back to 4K (504 64-bit pointers).
This reduces the rate of writes to work.full in the garbage benchmark
from a peak of ~780,000 writes/sec to a peak of ~32,000 writes/sec.
This has negligible effect on the go1 benchmarks. It slightly slows
down the garbage benchmark.
name old time/op new time/op delta
XBenchGarbage-12 5.37ms ± 5% 5.60ms ± 2% +4.37% (p=0.000 n=20+20)
Change-Id: Ic9cc28e7a125d23d9faf4f5e690fb8aa9bcdfb28
Reviewed-on: https://go-review.googlesource.com/15893
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, assists are non-preemptible, which means a heavily
assisting G can block other Gs from running. At the beginning of a GC
cycle, it can also delay scang, which will spin until the assist is
done. Since scanning is currently done sequentially, this can
seriously extend the length of the scan phase.
Fix this by making assists preemptible. Since the assist holds work
buffers and runs on the system stack, this must be done cooperatively:
we make gcDrainN return on preemption, and make the assist return from
the system stack and voluntarily Gosched.
This is prerequisite to enlarging the work buffers. Without this
change, the delays and spinning in scang increase significantly.
This has no effect on the go1 benchmarks.
name old time/op new time/op delta
XBenchGarbage-12 5.72ms ± 4% 5.37ms ± 5% -6.11% (p=0.000 n=20+20)
Change-Id: I829e732a0f23b126da633516a1a9ec1a508fdbf1
Reviewed-on: https://go-review.googlesource.com/15894
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
GC assists must block until the assist can be satisfied (either
through stealing credit or doing work) or the GC cycle ends.
Currently, this is implemented as a retry loop with a 100 µs delay.
This obviously isn't ideal, as it wastes CPU and delays mutator
execution. It also has the somewhat peculiar downside that sleeping a
G requires allocation, and this requires working around recursive
allocation.
Replace this timed delay with a proper scheduling queue. When an
assist can't be satisfied immediately, it adds the allocating G to a
queue and parks it. Any time background scan credit is flushed, it
consults this queue, directly satisfies the debt of queued assists,
and wakes up satisfied assists before flushing any remaining credit to
the background credit pool.
No effect on the go1 benchmarks. Slightly speeds up the garbage
benchmark.
name old time/op new time/op delta
XBenchGarbage-12 5.81ms ± 1% 5.72ms ± 4% -1.65% (p=0.011 n=20+20)
Updates #12041.
Change-Id: I8ee3b6274dd097b12b10a8030796a958a4b0e7b7
Reviewed-on: https://go-review.googlesource.com/15890
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This eliminates many write barriers in the scheduler code that are
unnecessary and will interfere with upcoming changes where the garbage
collector will have to invoke run queue functions in contexts that
must not have write barriers.
Change-Id: I702d0ac99cfd00ffff406e7362917db6a43e7e55
Reviewed-on: https://go-review.googlesource.com/16556
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
The error message should indicate the name of the unset variable,
rather than the value. The value will alwayse be empty.
Change-Id: I6f6c165074dfce857b6523703a890d205423cd28
Reviewed-on: https://go-review.googlesource.com/16555
Reviewed-by: David Crawshaw <crawshaw@golang.org>
golang.org/cl/16436 added a local symbol for every global function, but also
added a duplicate entry for the global symbol. Surprisingly this hasn't caused
any noticeable problems, but it's still wrong.
Change-Id: Icd3906760f8aaf7bef31ffd4f2d866d73d36dc2c
Reviewed-on: https://go-review.googlesource.com/16581
Reviewed-by: Ian Lance Taylor <iant@golang.org>
* use new(int32) to be pedantic about documented SetFinalizer rules:
"The argument x must be a pointer to an object allocated by calling
new or by taking the address of a composite literal"
* remove the amd64-only restriction. The GC is fully precise everywhere
now, even on 32-bit. (keep the gccgo restriction, though)
* remove a data race (perhaps the actual bug) and use atomic.LoadInt32
for the final check. The race detector is now happy, too.
Updates #13100
Change-Id: I8d05c0ac4f046af9ba05701ad709c57984b34893
Reviewed-on: https://go-review.googlesource.com/16535
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
To avoid collisions with what existing code may already be doing.
Change-Id: Ice639440aafc0724714c25333d90a49954372230
Reviewed-on: https://go-review.googlesource.com/16503
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change makes Dial, Listen and ListenPacket with invalid port fail
whatever GODEBUG=netdns is.
Please be informed that cgoLookupPort with an out of range literal
number may return either the lower or upper bound value, 0 or 65535,
with no error on some platform.
Fixes#11715.
Change-Id: I43f9c4fb5526d1bf50b97698e0eb39d29fd74c35
Reviewed-on: https://go-review.googlesource.com/12447
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also new tests added. So, perhaps, this CL corrects
even more broken EvalSymlinks behaviour.
Fixes#12451
Change-Id: I81b9d92bab74bcb8eca6db6633546982fe5cec87
Reviewed-on: https://go-review.googlesource.com/16192
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The GNU binutils recently picked up support for new 386/amd64
relocations. Add support for them in the Go linker when doing an
internal link.
The 386 relocation R_386_GOT32X was proposed in
https://groups.google.com/forum/#!topic/ia32-abi/GbJJskkid4I . It can
be treated as identical to the R_386_GOT32 relocation.
The amd64 relocations R_X86_64_GOTPCRELX and R_X86_64_REX_GOTPCRELX were
proposed in
https://groups.google.com/forum/#!topic/x86-64-abi/n9AWHogmVY0 . They
can both be treated as identical to the R_X86_64_GOTPCREL relocation.
The purpose of the new relocations is to permit additional linker
relaxations in some cases. We do not attempt to support those cases.
While we're at it, remove the unused and in some cases out of date
_COUNT names from ld/elf.go.
Fixes#13114.
Change-Id: I34ef07f6fcd00cdd2996038ecf46bb77a49e968b
Reviewed-on: https://go-review.googlesource.com/16529
Reviewed-by: Minux Ma <minux@golang.org>
The code is meant to return "<nil>", but because of a make([]Type, 8)
call that should be make([]Type, 0, 8), the nil Type happens to
already appear in the array.
Change-Id: I2db140046e52f27db1b0ac84bde2b6680677dd95
Reviewed-on: https://go-review.googlesource.com/16464
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Noticed by cmd/vet.
Expected values array produced by Python instead of Keisan because:
1) Keisan's website calculator is painfully difficult to copy/paste
values into and out of, and
2) after tediously computing e^(vf[i] * 10) - 1 via Keisan I
discovered that Keisan computing vf[i]*10 in a higher precision was
giving substantially different output values.
Also, testing uses "close" instead of "veryclose" because 386's
assembly implementation produces values for some of the test cases
that fail "veryclose". Curiously, Expm1(vf[i]*10) is identical to
Exp(vf[i]*10)-1 on 386, whereas with the portable implementation
they're only "veryclose".
Investigating these questions is left to someone else. I just wanted
to fix the cmd/vet warning.
Fixes#13101.
Change-Id: Ica8f6c267d01aa4cc31f53593e95812746942fbc
Reviewed-on: https://go-review.googlesource.com/16505
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Klaus Post <klauspost@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
