Go's continuous build system depends on HTTP trailers for the buildlet
interface.
Andrew rewrote the makerelease tool to work in terms of Go's builder
system (now at x/build/cmd/release), but it previously could only
create GCE-based buildlets, which meant x/build/cmd/release couldn't
build the release for Darwin.
https://golang.org/cl/11901 added support for proxying buildlet
connections via the coordinator, but that exposed the fact that
httputil.ReverseProxy couldn't proxy Trailers. A fork of that code
also wasn't possible because net/http needlessly deleted the "Trailer"
response header in the Transport code. This mistake goes back to
"release-branch.r56" and earlier but was never noticed because nobody
ever uses Trailers, and servers via ResponseWriter never had the
ability to even set trailers before this Go 1.5. Note that setting
trailers requires pre-declaring (in the response header) which
trailers you'll set later (after the response body). Because you could
never set them, before this release you could also never proxy them.
Change-Id: I2410a099921790dcd391675ae8610300efa19108
Reviewed-on: https://go-review.googlesource.com/11940
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Don't know why, but git deleted the previous version of this change.
This is the same change as https://go-review.googlesource.com/11884,
which I will now abandon, with a couple of fixes.
Almost all done now. Could use help with the TODOs.
Major missing piece is the trace command. Vendoring
section is also weak, but it's also undocumented elsewhere.
Change-Id: I5d8556b23aa6628eb7bf0e330d4dd8d4ac2157c5
Reviewed-on: https://go-review.googlesource.com/11887
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Don't talk about commands that no longer exist.
There are still references throughout the tree, mostly in comments,
but they provide a charming historical backdrop for the idle tourist.
Change-Id: I637ebdce05bbc7df5addcc46cb772d2bb9f3e073
Reviewed-on: https://go-review.googlesource.com/11885
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The second (fallback) draw is a no-op, but it's a non-trivial amount of work.
Fixes#11550.
benchmark old ns/op new ns/op delta
BenchmarkPaletted-4 16301219 7309568 -55.16%
Change-Id: Ic88c537b2b0c710cf517888f3dd15cb702dd142f
Reviewed-on: https://go-review.googlesource.com/11858
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also add words about the assembler.
Change-Id: I9bd8cc88076f06b0eef36a07f57d1ad5d9261d8d
Reviewed-on: https://go-review.googlesource.com/11853
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit 6f7961da28.
Russ suggests changing the frozon syscall package and obviously it's a
better solution. Perhaps he will also let me know the way how to get the
project owners to agree later.
Fixes#11492.
Change-Id: I98f9f366b72b85db54b4acfc3a604b62fb6d783c
Reviewed-on: https://go-review.googlesource.com/11854
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
As per comments in cl/11834.
Change-Id: I285536b882fa9496e15d77d0d4c16ee913aca581
Reviewed-on: https://go-review.googlesource.com/11861
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On some VMs two events can happen at the same time. For examples:
179827399 GoStart p=2 g=11 off=936359 g=11
179827399 GoUnblock p=2 g=0 off=936355 g=11
If we do non-stable sort, the events can be reordered making the trace inconsistent.
Do stable sort instead.
Batches are dumped in FIFO order, so if these same-time events are split into
separate batches, stable sort still works.
Events on different CPUs go into different batches and can be reordered.
But the intention is that causally-related events on different CPUs
will have larger (non-zero) time diff.
Update #11320
Change-Id: Id1df96af41dff68ea1782ab4b23d5afd63b890c9
Reviewed-on: https://go-review.googlesource.com/11834
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Integrate the latest trace-viewer changes.
It now handles nanoseconds without any issues (thanks to @egonelbre!).
So change timestamps from microseconds to nanoseconds.
Change-Id: I010f27effde7e80c9992e6f276f6912354d27df4
Reviewed-on: https://go-review.googlesource.com/11244
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Egon Elbre <egonelbre@gmail.com>
Everything in the library but crypto and net.
Change-Id: I89b21b9621e6d338fa1891da0eabba5d7d2fe349
Reviewed-on: https://go-review.googlesource.com/11820
Reviewed-by: Russ Cox <rsc@golang.org>
Adding a mutex was easier than documenting it, and is consistent with
gob.
Fixes#9847
Change-Id: Ifa94c17e7c11643add81b35431ef840b794d78b1
Reviewed-on: https://go-review.googlesource.com/11682
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The optional Qualifier function determines what prefix to attach to
package-level names, enabling clients to qualify packages in different
ways, for example, using only the package name instead of its complete
path, or using the locally appropriate name for package given a set of
(possibly renaming) imports.
Prior to this change, clients wanting this behavior had to copy
hundreds of lines of complex printing logic.
Fun fact: (*types.Package).Path and (*types.Package).Name are valid
Qualifier functions.
We provide the RelativeTo helper function to create Qualifiers so that
the old behavior remains a one-liner.
Fixesgolang/go#11133
This CL is a copy of https://go-review.googlesource.com/#/c/11692/
to the golang.org/x/tools repository.
Change-Id: I26d0f3644d077a26bfe350989f9c545f018eefbf
Reviewed-on: https://go-review.googlesource.com/11790
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
We can't address more than this on amd64 anyway.
Fixes#9862.
Change-Id: Ifb1abae558e2e1ee2dc953a76995f3f08c60b1df
Reviewed-on: https://go-review.googlesource.com/11715
Reviewed-by: Austin Clements <austin@google.com>
Compiling a simple file containing a slice of 100,000 strings,
the size of the resulting binary dropped from 5,896,224 bytes
to 3,495,968 bytes, which is the expected 2,400,000 bytes,
give or take.
Fixes#7384.
Change-Id: I3e551b5a1395b523a41b33518d81a1bf28da0906
Reviewed-on: https://go-review.googlesource.com/11698
Reviewed-by: Austin Clements <austin@google.com>
This was originally done in https://codereview.appspot.com/5690059
(Feb 2012) to deal with bad response headers coming back from webcams,
but it presents a potential security problem with HTTP request
smuggling for request headers containing "Content Length" instead of
"Content-Length".
Part of overall HTTP hardening for request smuggling. See RFC 7230.
Thanks to Régis Leroy for the report.
Change-Id: I92b17fb637c9171c5774ea1437979ae2c17ca88a
Reviewed-on: https://go-review.googlesource.com/11772
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If you have more than 10 procs, then currently they are sorted alphabetically as
0, 10, 11, ..., 19, 2, 20, ...
Assign explicit order to procs so that they are sorted numerically.
Change-Id: I6d978d2cd439aa2fcbcf147842a643f9073eef75
Reviewed-on: https://go-review.googlesource.com/11750
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
RawPath is a hint to the desired encoding of Path.
It is ignored when it is not a valid encoding of Path,
such as when Path has been changed but RawPath has not.
It is not ignored but also not useful when it matches
the url package's natural choice of encoding.
In this latter case, set it to the empty string.
This should help drive home the point that clients
cannot in general depend on it being present and
that they should use the EncodedPath method instead.
This also reduces the impact of the change on tests,
especially tests that use reflect.DeepEqual on parsed URLs.
Change-Id: I437c51a33b85439a31c307caf1436118508ea196
Reviewed-on: https://go-review.googlesource.com/11760
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When an xmlns="..." attribute was explicitly generated,
it was being ignored because the name space on the
attribute was assumed to have been explicitly set (to the empty
name space) and it's not possible to have an element in the
empty name space when there is a non-empty name space set.
We fix this by recording when a default name space has been
explicitly set and setting the name space of the element to that
so printer.defineNS can do its work correctly.
We do not attempt to add our own xmlns="..." attribute
when one is explicitly set.
We also add tests for EncodeElement, as that's the only way
to attain coverage of some of the changed behaviour.
Some other test coverage is also increased, although
more work remains to be done in this area.
This change was jointly developed with Martin Hilton (mhilton on github).
Fixes#11431.
Change-Id: I7b85e06eea5b18b2c15ec16dcbd92a8e1d6a9a4e
Reviewed-on: https://go-review.googlesource.com/11635
Reviewed-by: Russ Cox <rsc@golang.org>
This allows for "race free" cancellation, in the sense discussed in
issue #11013: in contrast to Transport.CancelRequest, the cancellation
will not be lost if the user cancels before the request is put into the
transport's internal map.
Fixes#11013.
Change-Id: I0b5e7181231bdd65d900e343f764b4d1d7c422cd
Reviewed-on: https://go-review.googlesource.com/11601
Run-TryBot: David Symonds <dsymonds@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I think this has the same meaning as before,
but the text is tighter, and it makes some people happy.
Fixes#10182.
Change-Id: I7ee1eae4bcd6ee4a5898ea948648939e6bde5f01
Reviewed-on: https://go-review.googlesource.com/11674
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This behavior is not what we might have designed from the start,
but it has been present since Go 1. Rather than make a visible
behavioral change that might cause programs to work differently
in Go ≤1.4 vs Go ≥1.5, document what SkipDir on a non-directory
has always meant. If code doesn't want this meaning, it is easy
enough not to return SkipDir on non-directories.
Fixes#10533.
Change-Id: Ic0612f032044bc7c69bf62583a02037e4b47530b
Reviewed-on: https://go-review.googlesource.com/11690
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Also: make (*Scope).Innermost work for Package scopes.
This change is identical to http://go-review.googlesource.com/#/c/11691/,
except for minor changes required by the use of testImporter.
Change-Id: Id07e66f78987f7242c2e642dfd6ee613676e10e5
Reviewed-on: https://go-review.googlesource.com/11714
Reviewed-by: Robert Griesemer <gri@golang.org>
This code used to only be run for ELF, with the predictable
result that using -s with external linking broke on Windows and OS X.
Moving it here should fix Windows and does fix OS X.
CL 10835 also claims to fix the crash on Windows.
I don't know whether it does so correctly, but regardless,
this CL should make that one a no-op.
Fixes#10254.
Change-Id: I2e7b45ab0c28568ddbb1b50581dcc157ae0e7ffe
Reviewed-on: https://go-review.googlesource.com/11695
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Change 7c7126cfeb removed the primality
checking in Validate to save CPU time. That check happened to be
filtering out private keys with primes that were zero or one. Without
that filtering, such primes cause a panic when trying to use such a
private key.
This change specifically checks for and rejects primes ≤ 1 in Validate.
Fixes#11233.
Change-Id: Ie6537edb8250c07a45aaf50dab43227002ee7386
Reviewed-on: https://go-review.googlesource.com/11611
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
