This CL changes the inliner to process transitive inlining iteratively
after the AST has actually been edited, rather than recursively and
immediately. This is important for handling indirect function calls
correctly, because ir.reassigned walks the function body looking for
reassignments; whereas previously the inlined reassignments might not
have been actually added to the AST yet.
Fixes#54632.
Change-Id: I0dd69813c8a70b965174e0072335bc00afedf286
Reviewed-on: https://go-review.googlesource.com/c/go/+/425257
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Normally, when moving Go values of type T from one location to another,
we don't need to worry about partial overlaps. The two Ts must either be
in disjoint (nonoverlapping) memory or in exactly the same location.
There are 2 cases where this isn't true:
1) Using unsafe you can arrange partial overlaps.
2) Since Go 1.17, you can use a cast from a slice to a ptr-to-array.
https://go.dev/ref/spec#Conversions_from_slice_to_array_pointer
This feature can be used to construct partial overlaps of array types.
var a [3]int
p := (*[2]int)(a[:])
q := (*[2]int)(a[1:])
*p = *q
We don't care about solving 1. Or at least, we haven't historically
and no one has complained.
For 2, we need to ensure that if there might be partial overlap,
then we can't use OpMove; we must use memmove instead.
(memmove handles partial overlap by copying in the correct
direction. OpMove does not.)
Note that we have to be careful here not to introduce a call when
we're marshaling arguments to a call or unmarshaling results from a call.
Fixes#54467
Change-Id: I1ca6aba8041576849c1d85f1fa33ae61b80a373d
Reviewed-on: https://go-review.googlesource.com/c/go/+/425076
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
For #23870
Change-Id: I3bbe0f751254d1354a59a88b45e6f944c7a2fb4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/417874
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
CL 414836 limited the check for implicit dot for method call enabled by
a type bound. However, the checking condition for ODOTMETH only is not
right. For example, for promoted method, we have a OXDOT node instead,
and we still have to check for implicit dot in this case.
However, if the base type and embedded types have the same method name,
e.g in issue #53419, typecheck.AddImplicitDots will be confused and
result in an ambigus selector.
To fix this, we ensure methods for the base type are computed, then only
do the implicit dot check if we can find a matched method.
Fixes#54348
Change-Id: Iefe84ff330830afe35c5daffd499824db108da23
Reviewed-on: https://go-review.googlesource.com/c/go/+/422274
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The issue is expected to be fixed when Unified IR is enabled by default,
so adding a test to make sure thing works correctly.
Updates #53702
Change-Id: Id9d7d7ca4506103df0d10785ed5ee170d69988ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/423434
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
I structured the test for issue54343.go after issue46725.go, where I
was careful to use `[4]int`, which is a type large enough to avoid the
tiny object allocator (which interferes with finalizer semantics). But
in that test, I didn't note the importance of that type, so I
mistakenly used just `int` in issue54343.go.
This CL switches issue54343.go to use `[4]int` too, and then adds
comments to both pointing out the significance of this type.
Updates #54343.
Change-Id: I699b3e64b844ff6d8438bbcb4d1935615a6d8cc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/423115
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
With GOEXPERIMENT=unified, the order variables are printed in "live at
entry to f.func1" is sensitive to whether regabi is enabled for some
reason. The order shouldn't matter to correctness, but it is odd.
For now, this CL just relaxes the test expectation order to unblock
enabling GOEXPERIMENT=unified by default. I've filed #54402 to
investigate further to confirm this a concern.
Updates #54402.
Change-Id: Iddfbb12c6cf7cc17b2aec8102b33761abd5f93ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/422975
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For selector expression "x.M" where "M" is a promoted method, irgen is using
the type of receiver "x" for determining the typeparams for instantiation.
However, because M is a promoted method, so its associated receiver is
not "x", but "x.T" where "T" is the embedded field of "x". That casues a
mismatch when converting non-shape types arguments.
Fixing it by using the actual receiver which has the method, instead of
using the base receiver.
Fixes#53982
Change-Id: I1836fc422d734df14e9e6664d4bd014503960bfc
Reviewed-on: https://go-review.googlesource.com/c/go/+/419294
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
The Go 1.18 frontend handles package-scope generic method values by
spilling the receiver value to a global temporary variable, which pins
it into memory. This issue isn't present in unified IR, which uses
OMETHVALUE when the receiver type is statically known.
Updates #54343.
Change-Id: I2c4ffeb125a3cf338f949a93b0baac75fff6cd31
Reviewed-on: https://go-review.googlesource.com/c/go/+/422198
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
As it can't appear in user package paths.
There is a hack for handling "go:buildid" and "type:*" on windows/386.
Previously, windows/386 requires underscore prefix on external symbols,
but that's only applied for SHOSTOBJ/SUNDEFEXT or cgo export symbols.
"go.buildid" is STEXT, "type.*" is STYPE, thus they are not prefixed
with underscore.
In external linking mode, the external linker can't resolve them as
external symbols. But we are lucky that they have "." in their name,
so the external linker see them as Forwarder RVA exports. See:
- https://docs.microsoft.com/en-us/windows/win32/debug/pe-format#export-address-table
- https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/pe-dll.c;h=e7b82ba6ffadf74dc1b9ee71dc13d48336941e51;hb=HEAD#l972)
This CL changes "." to ":" in symbols name, so theses symbols can not be
found by external linker anymore. So a hacky way is adding the
underscore prefix for these 2 symbols. I don't have enough knowledge to
verify whether adding the underscore for all STEXT/STYPE symbols are
fine, even if it could be, that would be done in future CL.
Fixes#37762
Change-Id: I92eaaf24c0820926a36e0530fdb07b07af1fcc35
Reviewed-on: https://go-review.googlesource.com/c/go/+/317917
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
There's no need for a and b to match types. The typechecker already
ensured that a and b are both slices with the same base type, or
a and b are (possibly named) []byte and string.
The optimization to treat append(b, make([], ...)) as a zeroing
slice extension doesn't fire when there's a OCONVNOP wrapping the make.
Fixes#53888
Change-Id: Ied871ed0bbb8e4a4b35d280c71acbab8103691bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/418475
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Same as CL 417555, but for cmd/compile.
Fixes#54220
Change-Id: I4cc6deaf0a87c952f636888b4ab73f81a44bfebd
Reviewed-on: https://go-review.googlesource.com/c/go/+/420975
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Merge List:
+ 2022-07-27 462b78fe70 misc/cgo/test: use fewer threads in TestSetgidStress in long mode
+ 2022-07-27 055113ef36 math/big: check buffer lengths in GobDecode
+ 2022-07-27 4248146154 net: document UDPConn.ReadFromUDPAddrPort's AddrPort result more
+ 2022-07-26 faf4e97200 net: fix WriteMsgUDPAddrPort addr handling
+ 2022-07-26 caa225dd29 doc/go1.19: note that updated race syso files require GNU ld 2.26
+ 2022-07-26 ceefd3a37b bytes: document that Reader.Reset affects the result of Size
+ 2022-07-26 3e97294663 runtime/cgo: use frame address to set g0 stack bound
+ 2022-07-25 24dc27a3c0 cmd/compile: fix blank label code
+ 2022-07-25 9fcc8b2c1e runtime: fix runtime.Breakpoint() on windows/arm64
+ 2022-07-25 795a88d0c3 cmd/go: add space after comma in 'go help test'
+ 2022-07-25 9eb3992ddd doc/go1.19: minor fixes
+ 2022-07-25 dcea1ee6e3 time: clarify documentation for allowed formats and add tests to prove them
+ 2022-07-25 37c8112b82 internal/fuzz: fix typo in function comments
+ 2022-07-25 850d547d2d doc/go1.19: expand crypto release notes
+ 2022-07-24 64f2829c9c runtime: fix typo in function comments
+ 2022-07-24 2ff563a00e cmd/compile/internal/noder: correct spelling errors for instantiation
+ 2022-07-22 c5da4fb7ac cmd/compile: make jump table symbol local
+ 2022-07-22 774fa58d1d A+C: delete AUTHORS and CONTRIBUTORS
+ 2022-07-21 2d655fb15a unsafe: document when Sizeof/Offsetof/Alignof are not constant
+ 2022-07-21 076c3d7f07 net/http: remove accidental heading in Head documentation
+ 2022-07-21 c4a6d3048b cmd/dist: enable race detector test on S390X
+ 2022-07-20 244c8b0500 cmd/cgo: allow cgo to pass strings or []bytes bigger than 1<<30
+ 2022-07-20 df38614bd7 test: use go tool from tree, not path
+ 2022-07-20 bb1749ba3b cmd/compile: improve GOAMD64=v1 violation test
+ 2022-07-19 176b63e711 crypto/internal/nistec,debug/gosym: fix typos
Change-Id: I96e5d60039381691dffd841e58927f0afff8c544
When checkEnabled is forced true, the 52278 test fails. Be a bit
more careful about processing blank labels.
Update #52278
Change-Id: I48aa89e2c9e3715d8efe599bc4363b5b5879d8a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/419318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
In this test, traditionally the comparison `*l == r[0]` was left as a
comparison between `*l` (type `any`) and `r[0]` (type `*int`), and the
rest of the compiler needed to handle mixed-typed comparisons.
However, this means more complexity for wiring up explicit rtypes.
To simplify rtype handling, the next CL will change unified IR to
instead handle the expression as `*l == any(r[0])`. However, a
consequence of this currently is that walk will now sequence the
`any(r[0])` expression first, because it involves a
concrete-to-interface conversion. And in turn, this means the `r[0]`
panic ("index out of bounds") will take priority over the `*l`
panic ("nil pointer dereference").
This is a change in user-visible semantics in some cases, but the Go
spec leaves this unspecified, so it shouldn't be an issue. Note also:
gccgo has the same behavior (i.e., panicking on index out of bounds,
not nil pointer dereference), and cmd/compile also already has the
same behavior when the interface conversion is explicit (as in the
added "nil pointer dereference #3" test case).
Updates #23735.
Updates #32187.
Change-Id: I49e5dcca85b4680f9c8780ef0013e64254d38fe5
Reviewed-on: https://go-review.googlesource.com/c/go/+/418097
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Conflicts:
- test/run.go
Conflicts in the known-fails list, plus removed a test from the known-fails that now works.
Merge List:
+ 2022-07-19 8e1e64c16a cmd/compile: fix mknode script
+ 2022-07-19 28be440d34 A+C: add Weizhi Yan
+ 2022-07-19 85a482fc24 runtime: revert to using the precomputed trigger for pacer calculations
+ 2022-07-19 ae7340ab68 CONTRIBUTORS: update for the Go 1.19 release
+ 2022-07-18 de8101d21b runtime: fix typos
+ 2022-07-18 967a3d985d cmd/compile: revert "remove -installsuffix flag"
+ 2022-07-18 c0c1bbde17 http: improve Get documentation
+ 2022-07-15 2aa473cc54 go/types, types2: correct alignment of atomic.Int64
+ 2022-07-15 4651ebf961 encoding/gob: s/TestIngoreDepthLimit/TestIgnoreDepthLimit/
+ 2022-07-14 dc00aed6de go/parser: skip TestParseDepthLimit for short tests
+ 2022-07-14 783ff7dfc4 encoding/xml: skip TestCVE202230633 for short tests
+ 2022-07-14 aa80228526 cmd/go/internal/modfetch: avoid duplicating path components in Git fetch errors
+ 2022-07-14 b9d5a25442 cmd/go: save zip sums for downloaded modules in 'go mod download' in a workspace
+ 2022-07-14 a906d3dd09 cmd/go: avoid re-enqueuing workspace dependencies with errors
+ 2022-07-14 266c70c263 doc/go1.19: add a release note for 'go list -json=SomeField'
+ 2022-07-13 558785a0a9 cmd/compile: remove -installsuffix flag
+ 2022-07-13 1355ea3045 cmd/compile: remove -importmap flag
+ 2022-07-13 f71f3d1b86 misc/cgo/testshared: run tests only in GOPATH mode
+ 2022-07-13 feada53661 misc/cgo/testcshared: don't rely on an erroneous install target in tests
+ 2022-07-13 c006b7ac27 runtime: clear timerModifiedEarliest when last timer is deleted
+ 2022-07-13 923740a8cc cmd/compile: fix type assert in dict pass
+ 2022-07-12 bf2ef26be3 cmd/go: in script tests, avoid checking non-main packages for staleness
+ 2022-07-12 5f5cae7200 cmd/go: avoid indexing GOROOT packages when the compiler is 'gccgo'
+ 2022-07-12 c2edb2c841 cmd/go: port TestIssue16471 to a script test and add verbose logging
+ 2022-07-12 9c2526e637 cmd/go/internal/modfetch/codehost: add missing newline in '# lock' log message
+ 2022-07-12 85486bcccb image/jpeg: increase TestLargeImageWithShortData timeout by an order of magnitude
+ 2022-07-12 27794c4d4a cmd/go/internal/modload: ignore disallowed errors when checking for updates
+ 2022-07-12 b2b8872c87 compress/gzip: fix stack exhaustion bug in Reader.Read
+ 2022-07-12 ac68c6c683 path/filepath: fix stack exhaustion in Glob
+ 2022-07-12 fa2d41d0ca io/fs: fix stack exhaustion in Glob
+ 2022-07-12 6fa37e98ea encoding/gob: add a depth limit for ignored fields
+ 2022-07-12 695be961d5 go/parser: limit recursion depth
+ 2022-07-12 08c46ed43d encoding/xml: use iterative Skip, rather than recursive
+ 2022-07-12 c4c1993fd2 encoding/xml: limit depth of nesting in unmarshal
+ 2022-07-12 913d05133c cmd/go: avoid spurious readdir during fsys.Walk
+ 2022-07-12 d3d7998756 net/http: clarify that MaxBytesReader returns *MaxBytesError
+ 2022-07-11 126c22a098 syscall: gofmt after CL 412114
+ 2022-07-11 123a6328b7 internal/trace: don't report regions on system goroutines
+ 2022-07-11 846490110a runtime/race: update amd64 syso images to avoid sse4
+ 2022-07-11 b75ad09cae cmd/trace: fix typo in web documentation
+ 2022-07-11 7510e597de cmd/go: make module index loading O(1)
+ 2022-07-11 b8bf820d5d cmd/nm: don't rely on an erroneous install target in tests
+ 2022-07-11 ad641e8521 misc/cgo/testcarchive: don't rely on an erroneous install target in tests
+ 2022-07-11 bf5898ef53 net/url: use EscapedPath for url.JoinPath
+ 2022-07-11 398dcd1cf0 database/sql: make TestTxContextWaitNoDiscard test more robust
+ 2022-07-11 f956941b0f cmd/go: use package index for std in load.loadPackageData
+ 2022-07-11 59ab6f351a net/http: remove Content-Encoding in writeNotModified
+ 2022-07-08 c1a4e0fe01 cmd/compile: fix libfuzzer instrumentation line number
+ 2022-07-08 5c1a13e7a4 cmd/go: avoid setting variables for '/' and ':' in TestScript subprocess environments
+ 2022-07-08 180bcad33d net/http: wait for listeners to exit in Server.Close and Shutdown
+ 2022-07-08 14abe8aa73 cmd/compile: don't convert to interface{} for un-comparable types in generic switch
+ 2022-07-07 1ebc983000 runtime: overestimate the amount of allocated memory in heapLive
+ 2022-07-07 c177d9d98a crypto/x509: restrict CRL number to <=20 octets
+ 2022-07-07 486fc01770 crypto/x509: correctly parse CRL entry extensions
+ 2022-07-07 8ac58de185 crypto/x509: populate Number and AKI of parsed CRLs
+ 2022-07-07 0c7fcf6bd1 cmd/link: explicitly disable PIE for windows/amd64 -race mode
+ 2022-07-07 eaf2125654 cmd/go: default to "exe" build mode for windows -race
+ 2022-07-06 1243ec9c17 cmd/compile: only check implicit dots for method call enabled by a type bound
+ 2022-07-06 c391156f96 cmd/go: set up git identity for build_buildvcs_auto.txt
+ 2022-07-06 2acd3646fc cmd/compile: rework induction variable detector
+ 2022-07-06 53a4152d47 os/exec: clarify that Wait must be called
+ 2022-07-06 177306f630 cmd/internal/notsha256: add purego tag as needed
+ 2022-07-06 f4755fc733 cmd/dist: use purego tag when building the bootstrap binaries
+ 2022-07-06 4484c30f78 misc/cgo/test: make TestSetgidStress cheaper
+ 2022-07-06 2007599dc8 test: recognize new gofrontend error message
+ 2022-07-05 d602380f58 cmd/compile: drop "buildcfg" from no instrument packages
+ 2022-07-05 c111091071 cmd/go: make module@nonexistentversion failures reusable
+ 2022-07-05 5f305ae8e5 cmd/go: add -reuse flag to make proxy invocations more efficient
+ 2022-07-05 84e091eef0 cmd/go: record origin metadata during module download
+ 2022-07-04 ceda93ed67 build/constraint: update doc to mention a feature added in Go 1.17
+ 2022-07-04 3cf79d9610 runtime: pass correct string to exits on Plan 9
+ 2022-07-01 e822b1e26e net/http: omit invalid header value from error message
+ 2022-07-01 4a2a3bca18 cmd/go, go/build: clarify build constraint docs
+ 2022-07-01 9a4d5357f4 flag: highlight support for double dashes in docs
+ 2022-07-01 c847a2c9f0 go/types, types2: document that exported predicates are unspecified for invalid type arguments
+ 2022-06-30 405c269b85 go/types, types2: re-enable a couple of commented out tests
+ 2022-06-30 aad9382e59 go/doc/comment: support links in lists in comments
+ 2022-06-30 af725f4286 os: fix a typo in path_windows.go
Change-Id: I381728322188aca0bfa81a946d6aedda8c07903c
In filenames, macOS translates Ä (U+00c4, c3 84) to Ä (U+0041 U+0308, 41 cc 88).
This causes problems for run.go's crude rules for testing the compiler.
Fixes#53954.
Change-Id: I850421cbf07e022ca5ff8122e0fb4e80deb55adf
Reviewed-on: https://go-review.googlesource.com/c/go/+/418334
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Induction variable detection is still not quite right. I've added
another failing test.
Redo the overflow/underflow detector so it is more obviously correct.
Update #53600Fixes#53653Fixes#53663
Change-Id: Id95228e282fdbf6bd80b26e1c41d62e935ba08ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/415874
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The new gofrontend message matches other gofrontend error messages,
so adjust the test to accept it.
For #27938
For #51237
Change-Id: I29b536f83a0cf22b1dbdae9abc2f5f6cf21d522d
Reviewed-on: https://go-review.googlesource.com/c/go/+/416014
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Conflicts:
- test/run.go: textual conflict in 1.18 known failures list
Merge List:
+ 2022-06-30 993c387032 os: simplify deadline fluctuation tests
+ 2022-06-30 4914e4e334 cmd/go/internal/modindex: remove spurious field from index_format documentation
+ 2022-06-30 981d5947af cmd/go: include module root in package index key
+ 2022-06-30 84db00ffd1 cmd/go: add a 'sleep' command for script tests
+ 2022-06-30 31b8c23c57 cmd/compile: fix prove pass when upper condition is <= maxint
+ 2022-06-30 17083a2fdf spec: retitle section on "Assignments" to "Assignment statements"
+ 2022-06-30 4d95fe6653 test: add regress test for #53619
+ 2022-06-29 6a7c64fde5 debug/pe: add IMAGE_FILE_MACHINE_LOONGARCH{64,32}
+ 2022-06-29 b2cc0fecc2 net/http: preserve nil values in Header.Clone
+ 2022-06-29 64ef16e777 cmd/internal/obj/arm64: save LR and SP in one instruction for small frames
+ 2022-06-29 0750107074 go/token: use atomics not Mutex for last file cache
+ 2022-06-29 e5017a93fc net/http: don't strip whitespace from Transfer-Encoding headers
+ 2022-06-29 20760cff00 runtime: add race annotations to cbs.lock
+ 2022-06-29 e6c0546c54 crypto/x509/pkix: move crl deprecation message
+ 2022-06-29 3562977b6f cmd/internal/obj/mips,s390x,riscv: save LR after decrementing SP
+ 2022-06-29 d6481d5b96 runtime: add race annotations to metricsSema
+ 2022-06-29 bd1783e812 crypto/x509: improve RevocationList documentation
+ 2022-06-28 160414ca6a cmd/internal/obj/arm64: fix BITCON constant printing error
+ 2022-06-28 a30f434667 cmd/go: pass --no-decorate when listing git tags for a commit
+ 2022-06-28 3580ef9d64 os/exec: on Windows, suppress ErrDot if the implicit path matches the explicit one
+ 2022-06-28 34f3ac5f16 cmd/compile: fix generic inter-inter comparisons from value switch statements
+ 2022-06-28 7df0a002e6 cmd/go/internal/modfetch: cache latest revinfo in Versions func
+ 2022-06-28 d5bf9604aa test: add more tests for const decls with ommitted RHS expressions
+ 2022-06-28 533082d1a0 test: add test that gofrontend failed to compile
+ 2022-06-28 47e792e22e runtime: clean up unused function gosave on loong64
+ 2022-06-28 a6e5be0d30 cmd/go: omit build metadata that may contain system paths when -trimpath is set
+ 2022-06-28 d3ffff2790 api: correct debug/pe issue number for Go 1.19 changes
+ 2022-06-28 751cae8855 cmd/go/internal/modload: fix doc comment
+ 2022-06-28 85d7bab91d go/printer: report allocs and set bytes
+ 2022-06-27 3af5280c00 net: really skip Windows PTR tests if we say we are skipping them
+ 2022-06-27 a42573c2f1 net: avoid darwin/arm64 platform bug in TestCloseWrite
+ 2022-06-27 68289f39f0 html/template: fix typo in content_test.go
+ 2022-06-27 c3bea70d9b cmd/link: link against libsynchronization.a for -race on windows
+ 2022-06-27 f093cf90bf test: add test that caused gofrontend crash
+ 2022-06-27 155612a9b9 test: add test that caused gofrontend crash
+ 2022-06-27 a861eee51a cmd/go: compile runtime/internal/syscall as a runtime package
+ 2022-06-27 8f9bfa9b7b crypto/internal/boring: factor Cache into crypto/internal/boring/bcache
+ 2022-06-26 351e0f4083 runtime: avoid fma in mkfastlog2table
+ 2022-06-26 416c953960 test: add test that gofrontend gets wrong
+ 2022-06-26 666d736ecb cmd/compile: do branch/label checks only once
+ 2022-06-26 6b309be7ab cmd/compile/internal/syntax: check fallthrough in CheckBranches mode
+ 2022-06-25 1821639b57 runtime: mark string comparison hooks as no split
+ 2022-06-25 3b594b9255 io: clarify SeekEnd offset value
+ 2022-06-25 4f45ec5963 cmd/go: prepend builtin prolog when checking for preamble errors
+ 2022-06-24 41e1d9075e strconv: avoid panic on invalid call to FormatFloat
+ 2022-06-24 bd4753905d internal/trace: add Go 1.19 test data
+ 2022-06-24 6b6c64b1cc cmd/internal/archive: don't rely on an erroneous install target in tests
Change-Id: Ib43126833bf534c311730d4283d4d25381cd3428
When the terminating condition is <= X, we need to make sure that
X+step doesn't overflow.
Fixes#53600
Change-Id: I36e5384d05b4d7168e48db6094200fcae409bfe5
Reviewed-on: https://go-review.googlesource.com/c/go/+/415219
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Works with cmd/compile, but fails with gccgo currently.
Updates #53619.
Change-Id: I787faa9584cc33bd851c9cc8f146c91f4eb36fc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/415238
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
For #51475
Change-Id: Ie1b27304687225194a323dc8305e5d62578fff4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/414755
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
For #52871
Change-Id: Id6102222a8b1ec8a84b716425bed0e349c65dbc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/414336
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
The gofrontend crashed importing a complex 0 constant.
For #52862
Change-Id: Ia87d8eadb9c5ddf51e1cd65c1a626f05f0d068d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/413980
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
For #52856
Change-Id: Iab3e8352f64d774058391f0422cd01c53c3e711d
Reviewed-on: https://go-review.googlesource.com/c/go/+/414235
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Fixes#50788.
Change-Id: Id1ed7d9c0687e3005e28598373fd5634178c78ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/413895
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
For #52846
Change-Id: I763f81def97b53277396c123c524f7b8193ea35e
Reviewed-on: https://go-review.googlesource.com/c/go/+/413694
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
We sometimes use 16-byte load+store to move values around in memory.
In rare circumstances, the loaded value must be spilled because the
store can't happen yet.
In that case, we need to be able to spill the 16-byte value.
Fixes#53454
Change-Id: I09fd08e11a63c6ba3ef781d3f5ede237e9b0132e
Reviewed-on: https://go-review.googlesource.com/c/go/+/413294
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Merge List:
+ 2022-06-16 635b1244aa cmd/go: pass GOEXPERIMENT through to subtests
+ 2022-06-16 ef808ae1d4 expvar: don't crash if map value set to nil
+ 2022-06-16 32510eea74 go/parser: remove unused method checkBinaryExpr
+ 2022-06-16 74f1fa6ecb cmd/go: parallelize matchPackages work in each module
+ 2022-06-16 1d9d99b7ce cmd/link: consider alignment in carrier symbol size calculation
+ 2022-06-16 bcce8ef498 spec: adjust incorrect sentence in section on rune literals
+ 2022-06-16 ecc268aa26 test: add test that gofrontend fails
+ 2022-06-15 b6c1606889 internal/goarch, internal/goos: update generators for syslist.go
+ 2022-06-15 91baf5cecc reflect: fix reference comment to runtime/map.go
+ 2022-06-15 0e3d0c9581 syscall: clarify Pdeathsig documentation on Linux
+ 2022-06-15 74bf90c779 go/types, types2: add test case for issue for coverage
+ 2022-06-15 0cd0c12f57 doc/go1.19: use matching closing tag in unix build constraint heading
+ 2022-06-15 97bfc77f38 syscall, runtime/internal/syscall: always zero the higher bits of return value on linux/loong64
+ 2022-06-15 937fa5000a net/netip: add missing ) in ParsePrefix errors
+ 2022-06-15 c2c76c6f19 cmd/link: set alignment for carrier symbols
+ 2022-06-15 36147dd1e8 cmd/go/internal/modindex: disable indexing for modules outside GOROOT and the module cache
+ 2022-06-15 2a78e8afc0 test: add tests for string/[]byte/[]rune conversions
+ 2022-06-15 f9c0264107 net: avoid infinite recursion in Windows Resolver.lookupTXT
+ 2022-06-14 0dffda1383 spec: clarify "slice of bytes" and "slice of runes" through examples
+ 2022-06-14 c22a6c3b90 reflect: when StructOf overflows computing size/offset, panic
+ 2022-06-14 e1e66a03a6 cmd/compile,runtime,reflect: move embedded bit from offset to name
+ 2022-06-14 cb9bf93078 cmd/go: quote package directory when calling glob
+ 2022-06-14 cad477c922 cpu: fix typos in test case
+ 2022-06-13 c29be2d41c runtime: add HACKING section on nosplit functions
+ 2022-06-13 c5be77b687 doc/go1.19: minor edits
+ 2022-06-13 56bc3098f4 sync: improve linearity test robustness
+ 2022-06-13 1fe2810f9c sync: move lock linearity test and treat it like a performance test
+ 2022-06-13 6130461149 internal/testmath: add two-sample Welch's t-test for performance tests
+ 2022-06-13 24b9039149 doc/go1.19: prefer relative links to other parts of the Go website
+ 2022-06-13 fbc75dff2f cmd/cgo: remove -fsanitize=hwaddress hardware tags
+ 2022-06-13 5ee939b819 spec: clarify behavior of map size hint for make built-in
+ 2022-06-13 4703546a29 spec: add missing optional type arguments after TypeName in syntax
+ 2022-06-13 2c52465cb3 net: avoid darwin_arm64 bug in TestDialParallelSpuriousConnection
+ 2022-06-13 9228d7d7d5 doc/go1.19: add a release note for module indexing
+ 2022-06-13 7eeec1f6e4 cmd/compile: fix missing dict pass for type assertions
+ 2022-06-13 d27128b065 doc/go1.19: fix crypto tags
+ 2022-06-10 55590f3a2b net/http: doc: update RFC reference for appropriate HTTP codes
+ 2022-06-10 ff3db8d12d doc: fix typos in Go memory model
+ 2022-06-10 fb75c2da91 cmd/dist, cmd/internal/metadata: don't install metadata binary
+ 2022-06-10 386245b68e runtime: fix stack split at bad time when fuzzing
+ 2022-06-09 2cfbef4380 cmd/cgo: recognize clang 14 DWARF type names
+ 2022-06-09 c7ccabf3fe runtime/cgo: retry _beginthread on EACCES
+ 2022-06-09 91019cc13d runtime/cgo: merge bodies of cgo_sys_thread_start on windows
+ 2022-06-09 840e99ed74 api: promote next to go1.19
+ 2022-06-09 1a2ca95ad2 go/types, types2: only set instance context if packages match
+ 2022-06-08 b51d44c6dd cmd/go/testdata/script: fix skip on list_replace_absolute_windows
+ 2022-06-08 80f86f706d api/next: minor reformat
+ 2022-06-08 13f6be2833 runtime: use pidleget for faketime jump
+ 2022-06-08 1292176bc9 cmd/go: clean paths before using them form index functions
+ 2022-06-08 1858ea5d85 syscall: remove unused setgroups on linux/loong64
+ 2022-06-08 bdde41e3ba runtime: skip TestGdbBacktrace on gdb bug
+ 2022-06-08 432158b69a net: fix testHookDialTCP race
+ 2022-06-08 899f0a29c7 cmd/go: enable module index by default
+ 2022-06-08 f862280e30 cmd/go: properly call PackageModuleRoot to get modroot for index
+ 2022-06-08 d65166024f cmd/go: set Root and target fields for packages in GOPATH
+ 2022-06-08 4afb0b9e53 doc/go1.19: delete remaining TODOs
+ 2022-06-08 3426b7201d runtime: gofmt
+ 2022-06-08 f330a3a987 doc/go1.19: complete most remaining TODOs
+ 2022-06-08 2882786bf4 runtime: remove unused pipe and setNonblock on linux/loong64
+ 2022-06-08 decdd87bea doc/go1.19: mention riscv64 supported regabi
+ 2022-06-07 b72a6a7b86 os: document that Chdir affects fs.FS returned by DirFS with a relative path
+ 2022-06-07 30b929b1ef syscall: remove unused accept on linux/loong64
+ 2022-06-07 a7551fe245 net: use synthetic network in TestDialParallel
+ 2022-06-07 19d71acd97 doc/go1.19: document that the assembler requires -p
+ 2022-06-07 d151134851 doc/go1.19: document linker CL that switches DWARF compressed section format
+ 2022-06-07 3507805bcd go/types, types2: better error message for invalid use of constraint type
+ 2022-06-07 269bf7e855 go/types, types2: better error message if type is not in type set
+ 2022-06-07 d4fb93be87 go/types, types2: use | rather than ∪ when printing term lists
+ 2022-06-07 346698eea7 doc/go1.19: add release notes for net/http and net/url
+ 2022-06-07 7a82c6859f doc/go1.19: adjust runtime release notes
+ 2022-06-07 f3e051a184 runtime: document GOMEMLIMIT in environment variables section
+ 2022-06-07 ef2567c7dd doc/go1.19: document loong64 port
+ 2022-06-07 69bb7c6ef5 sync/atomic: clarify that 8-byte alignment of variables is due to escape
+ 2022-06-07 81033fbd8e doc/go1.19: some platforms are still on TSAN v2
+ 2022-06-07 0c3a0543c2 doc/go1.19: compiler section is complete, modulo TODOs
+ 2022-06-07 835a946137 doc/go1.19: minor edits
+ 2022-06-07 429a4041eb doc/go1.19: complete TODOs for go/types
+ 2022-06-07 d2630aa4b2 doc/go1.19: add various crypto release notes
+ 2022-06-07 77d9252ddf runtime: fix inline assembly trampoline for arm64
+ 2022-06-07 38607c5538 cmd/link: specify -Wl,-z params as documented
+ 2022-06-07 95b68e1e02 doc/go1.19: delete boringcrypto TODO
+ 2022-06-07 a79623b019 doc/go1.19: add more TODOs from updated relnote
+ 2022-06-06 acfff42802 doc/go1.19: add release notes for the soft memory limit and idle GC
+ 2022-06-06 a71ca3dfbd runtime, sync, sync/atomic: document happens-before guarantees
+ 2022-06-06 3651a6117e go/doc/comment: add heuristics for common badly formatted comments
+ 2022-06-06 4c08260c51 doc/go_mem: update revision date
+ 2022-06-06 7271a0a287 doc/go1.19: gc requires -p=importpath
+ 2022-06-06 c1e2ecbaf9 doc/go1.19: document Resolver.PreferGo
+ 2022-06-06 11195c60e6 cmd/go: use index to match packages in dependency modules
+ 2022-06-06 ea5d7cbc26 all: boringcrypto post-merge cleanup
+ 2022-06-06 6c7b223c2b go/doc/comment: do not turn ``` into “`
+ 2022-06-06 ce757e94e0 go/doc/comment: add doc comment
+ 2022-06-06 95547aee8c cmd/compile: cast riscv64 rewrite shifts to unsigned int
+ 2022-06-06 d43ddc1f3f strconv: fix typo in atof.go
+ 2022-06-06 2fa45a4fcd cmd/link/internal/loadpe: handle _main reference properly
+ 2022-06-06 fc97075949 go/types, types2: simplify implementation of validType (fix TODO)
+ 2022-06-06 07eca49055 go/types, types2: use type nest to detect type cycles (fix validType)
+ 2022-06-06 770146d5a8 doc/go1.19: add TODOs for changes to go/types
+ 2022-06-06 1b8ca75eaa runtime: fix breakpoint in ppc64x
+ 2022-06-06 9ce28b518d text/template/parse: fix data race on lexer initialization
+ 2022-06-06 47e34ca533 go/types, types2: ensure that named types never expand infinitely
+ 2022-06-06 02e69cfa96 go/types, types2: store Named instance information separately
+ 2022-06-06 1323b0e8f0 go/types, types2: eliminate methodList in favor of just using Named.mu
+ 2022-06-06 846f971daa go/types, types2: remove Named.once in favor of monotonic state
+ 2022-06-06 66cbf67345 cmd/buildid: reject rewriting legacy buildids
+ 2022-06-04 47f806ce81 strconv: clarify ParseFloat accepts Go syntax for float literals
+ 2022-06-04 2730c6af9f runtime: fix typo in libfuzzer_arm64.s
+ 2022-06-04 a32a592c8c database/sql/driver: fix typo in driver.go
+ 2022-06-04 0293c51bc5 regexp: avoid copying each instruction executed
+ 2022-06-04 865911424d doc: update Go memory model
+ 2022-06-04 fc66cae490 doc/go1.19: remove TODO about LimitedReader
+ 2022-06-04 f8a53df314 io: revert: add an Err field to LimitedReader
+ 2022-06-04 21f05284c7 cmd/go: index standard library packages
Change-Id: Ia7595c77a555fd2a0e7bb3b6b2cfbb745bd4947b
For #52870
Change-Id: Ic0791af4283c9e426f7cbfab0514517ff84cfa80
Reviewed-on: https://go-review.googlesource.com/c/go/+/412535
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Matches examples in spec section on string conversions.
For #23814.
Change-Id: I08099c27bfdb98735868266f5a42901321b97b56
Reviewed-on: https://go-review.googlesource.com/c/go/+/412095
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
For type assertions, if either src or dst type has shape, we must
convert them to dynamic type assertions.
Fixes#53309
Change-Id: Ia3362fa67c011febcbdb5b26f856d081b5c366de
Reviewed-on: https://go-review.googlesource.com/c/go/+/411617
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
For constants literal, iimport/iexport read/write them as basic literal
nodes. So they are printed in diagnostic message as Go syntax. So "foo"
will be reported as string("foo").
Unified IR read/write the raw expression as string value, and when
printed in diagnostic, the string value is written out exactly as-is, so
"foo" will be written as "foo".
Thus, this CL relax the test in issue7921.go to match the string value only.
Updates #53058
Change-Id: I6fcf4fdcfc4b3be91cb53b081c48bd57186d8f35
Reviewed-on: https://go-review.googlesource.com/c/go/+/410795
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
So they can be formatted more presicely, and make it easier in the
transition to Unified IR.
Updates #53058
Change-Id: I8b5a46db05a2e2822289458995b8653f0a3ffbbe
Reviewed-on: https://go-review.googlesource.com/c/go/+/410594
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Unified IR uses to generate wrappers after the global inlining pass, so
it needs to apply inlining for the wrappers itself. However, inlining
may reveal new method value nodes which have not been seen yet, thus
unified IR never generates wrappers for them.
To fix it, just visiting the wrapper function body once more time after
inlining, and generate wrappers for any new method value nodes.
Fixes#52128
Change-Id: I78631c4faa0b00357d4f84704d3525fd38a52cd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/410344
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
For instantiated generic functions, all implicit dot operations are
resolved. Thus unsafe.Offsetof may calculating the offset against the
wrong base selector.
To fix it, we must remove any implicit dot operations to find the first
non-implicit one, which is the right base selector for calculating the
offset.
Fixes#53137
Change-Id: I38504067ce0f274615b306edc8f7d7933bdb631a
Reviewed-on: https://go-review.googlesource.com/c/go/+/409355
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The divisor must be non-zero for the rule to be triggered.
Fixes#53018
Change-Id: Id56b8d986945bbb66e13131d11264ee438de5cb2
Reviewed-on: https://go-review.googlesource.com/c/go/+/407655
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: xiaodong liu <teaofmoli@gmail.com>
Reviewed-by: WANG Xuerui <git@xen0n.name>
A composite literal assignment
x = T{field: v}
may be compiled to
x = T{}
x.field = v
We already do not use this form is RHS uses LHS. If LHS is
address-taken, RHS may uses LHS implicitly, e.g.
v = &x.field
x = T{field: *v}
The lowering above would change the value of RHS (*v).
Fixes#52953.
Change-Id: I3f798e00598aaa550b8c17182c7472fef440d483
Reviewed-on: https://go-review.googlesource.com/c/go/+/407014
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Change-Id: I63eb42f3ce5ca452279120a5b33518f4ce16be45
GitHub-Last-Rev: a88f2f72be
GitHub-Pull-Request: golang/go#52951
Reviewed-on: https://go-review.googlesource.com/c/go/+/406843
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
For #51291
Change-Id: If47e4cbf899853ade5050852c3870b9500da4c63
Reviewed-on: https://go-review.googlesource.com/c/go/+/406916
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
CL 395854 made inline pass to not inlining function with shape params,
but pass no shape arguments. This is intended to be the reverse case of
CL 361260.
However, CL 361260 is using wider condition than necessary. Though it
only needs to check against function parameters, it checks whether the
function type has no shape. It does not cause any issue, because
!fn.Type().HasShape() implies !fn.Type().Params().HasShape().
But for the reverse case, it's not true. Function may have shape type,
but has no shape arguments. Thus, we must tighten the condition to
explicitly check against the function parameters only.
Fixes#52907
Change-Id: Ib87e87ff767c31d99d5b36aa4a6c1d8baf32746d
Reviewed-on: https://go-review.googlesource.com/c/go/+/406475
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This test is currently overly sensitive to compiler optimizations,
because inlining can affect the order in which cmd/link emits field
references. The order doesn't actually matter though, so this CL just
tweaks the test to sort the tracked fields before printing them.
Updates #51734.
Change-Id: I3b65ca265856b2e1102f40406d5ce34610c70d40
Reviewed-on: https://go-review.googlesource.com/c/go/+/406674
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Since CL 391014, cmd/compile now requires the -p flag to be set the
build system. This CL changes it to initialize LocalPkg.Path to the
provided path, rather than relying on writing out `"".` into object
files and expecting cmd/link to substitute them.
However, this actually involved a rather long tail of fixes. Many have
already been submitted, but a few notable ones that have to land
simultaneously with changing LocalPkg:
1. When compiling package runtime, there are really two "runtime"
packages: types.LocalPkg (the source package itself) and
ir.Pkgs.Runtime (the compiler's internal representation, for synthetic
references). Previously, these ended up creating separate link
symbols (`"".xxx` and `runtime.xxx`, respectively), but now they both
end up as `runtime.xxx`, which causes lsym collisions (notably
inittask and funcsyms).
2. test/codegen tests need to be updated to expect symbols to be named
`command-line-arguments.xxx` rather than `"".foo`.
3. The issue20014 test case is sensitive to the sort order of field
tracking symbols. In particular, the local package now sorts to its
natural place in the list, rather than to the front.
Thanks to David Chase for helping track down all of the fixes needed
for this CL.
Updates #51734.
Change-Id: Iba3041cf7ad967d18c6e17922fa06ba11798b565
Reviewed-on: https://go-review.googlesource.com/c/go/+/393715
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 395854 made inline pass to not inlining function with shape params,
but pass no shape arguments. But it does not consider the case where
function has shape params, but passing zero arguments. In this case, the
un-safe interface conversion that may be applied to a shape argument can
not happen, so it's safe to inline the function.
Fixes#52907
Change-Id: Ifa7b23709bb47b97e27dc1bf32343d92683ef783
Reviewed-on: https://go-review.googlesource.com/c/go/+/406176
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For #52841
Change-Id: If4723a70fba0dbedb5d1e70dab58f0b4612bf8b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/405759
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The compiler use to compile f()(g()) as:
t1, t2 := g()
f()(t1, t2)
That violates the Go spec, since when "..., all function calls, ... are
evaluated in lexical left-to-right order"
This PR fixes the bug by compiling f()(g()) as:
t0 := f()
t1, t2 := g()
t0(t1, t2)
to make "f()" to be evaluated before "g()".
Fixes#50672
Change-Id: I6a766f3dfc7347d10f8fa3a151f6a5ea79bcf818
Reviewed-on: https://go-review.googlesource.com/c/go/+/392834
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
When a fully instantiated generic method is exported, be sure to also
export the types in its signature.
Fixes#52279.
Change-Id: Icc6bca05b01f914cf67faaf1bf184eaa5484f521
Reviewed-on: https://go-review.googlesource.com/c/go/+/405118
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Following CL 405114, the extension rule is also wrong. It is safe
to drop the extension if the value is from a boolean-generating
instruction, but not a boolean-typed Value in general (e.g. a Phi
or a in-register parameter). Fix it.
Updates #52788.
Change-Id: Icf3028fe8e90806f9f57fbe2b38d47da27a97e2a
Reviewed-on: https://go-review.googlesource.com/c/go/+/405115
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
On ARM64, an If block is lowered to (NZ cond yes no). This is
incorrect because cond is a boolean value and therefore only the
last byte is meaningful (same as AMD64, see ARM64Ops.go). But here
we are comparing a full register width with 0. Correct it by
comparing only the last bit.
Fixes#52788.
Change-Id: I2cacf9f3d2f45e149c361a290f511b2d4ed845c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/405114
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
An invalid program may produce invalid types. If the program
calls unsafe.Sizeof on such a type, which is a compile-time
computation, the size-computation must be able to handle it.
Add the invalid type to the list of permissible basic types
and give it a size of 1 (word).
Fixes#52748.
Change-Id: I6c409628f9b77044758caf71cdcb199f9e77adea
Reviewed-on: https://go-review.googlesource.com/c/go/+/404894
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For #52535
Change-Id: I6798a8379163497ebebcdadf836b8569735c282b
Reviewed-on: https://go-review.googlesource.com/c/go/+/404496
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
In walkCompare, any ir.OCONVNOP was removed from both operands. So when
constructing assignments for them to preserve any side-effects, using
temporary variables can cause type mismatched with original type.
Instead, using blank assignments will prevent that issue and still make
sure that the operands will be evaluated.
Fixes#52701
Change-Id: I229046acb154890bb36fe441d258563687fdce37
Reviewed-on: https://go-review.googlesource.com/c/go/+/403997
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@google.com>
We need to use the same marker everywhere. My CL to rename the
marker (CL 241661) and the CL to add more uses of the marker
under the old name (CL 241678) weren't coordinated with each other.
Fixes#52612
Change-Id: I97023c0769e518491924ef457fe03bf64a2cefa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/403094
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Accept ~x as ordinary unary expression in the parser but recognize
such expressions as invalid in the type checker.
This change opens the door to recognizing complex type constraint
literals such as `*E|~int` in `[P *E|~int]` and parse them correctly
instead of reporting a parse error because `P*E|~int` syntactically
looks like an incorrect array length expression (binary expression
where the RHS of | is an invalid unary expression ~int).
As a result, the parser is more forgiving with expressions but the
type checker will reject invalid uses as before.
We could pass extra information into the binary/unary expression
parse functions to prevent the use of ~ in invalid situations but
it doesn't seem worth the trouble. In fact it may be advantageous
to allow a more liberal expression syntax especially in the presence
of errors (better parser synchronization after an error).
Preparation for fixing #49482.
Change-Id: I119e8bd9445dfa6460fcd7e0658e3554a34b2769
Reviewed-on: https://go-review.googlesource.com/c/go/+/402255
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Fixes#52438.
Change-Id: I5cbf8c448dba037e9e0c5fe8f209401d6bf7d43f
Reviewed-on: https://go-review.googlesource.com/c/go/+/401134
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
After CL 398014 fixed a compiler deadlock on syntax errors,
this CL adds a test case and more details for that.
How it was fixed:
CL 57751 introduced a channel "sem" to limit the number of
simultaneously open files.
Unfortunately, when the number of syntax processing goroutines
exceeds this limit, will easily trigger deadlock.
In the original implementation, "sem" only limited the number
of open files, not the number of concurrent goroutines, which
will cause extra goroutines to block on "sem". When the p.err
of the following iteration happens to be held by the blocking
goroutine, it will fall into a circular wait, which is a deadlock.
CL 398014 fixed the above deadlock, also see issue #52127.
First, move "sem <- struct{}{}" to the outside of the syntax
processing goroutine, so that the number of concurrent goroutines
does not exceed the number of open files, to ensure that all
goroutines in execution can eventually write to p.err.
Second, move the entire syntax processing logic into a separate
goroutine to avoid blocking on the producer side.
Change-Id: I1bb89bfee3d2703784f0c0d4ded82baab2ae867a
Reviewed-on: https://go-review.googlesource.com/c/go/+/399054
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Fixes#52278
Change-Id: Ibf67c7b019feec277d316e04d93b458efea133fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/399574
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
For syntax errors in various (syntactic) lists, instead of reporting
a set of "expected" tokens (which may be incomplete), provide context
and mention "possibly missing" tokens. The result is a friendlier and
more accurate error message.
Fixes#49205.
Change-Id: I38ae7bf62febfe790075e62deb33ec8c17d64476
Reviewed-on: https://go-review.googlesource.com/c/go/+/396914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When parsing method declarations in an interface, the parser has
for historic reasons gracefully handled a list of method names with
a single (common) signature, and then reported an error. For example
interface {
m1, m2, m3 (x int)
}
This code originally came from the very first parser for Go which
initially permitted such declarations (or at least assumed that
people would write such declarations). Nobody is doing this at this
point, so there's no need for being extra careful here. Remove the
respective code and adjust the corresponding test.
Change-Id: If6f9b398bbc9e425dcd4328a80d8bf77c37fe8b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/396654
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 367755 added soleComponent for handling 1-byte type interface conversion.
This implementation must be kept in sync with Type.SoleComponent, but it
does not. When seeing a blank field in struct, we must continue looking
at the field type to find sole component, if any. The current code just
terminate immediately, which causes wrong sole component type returned.
Fixes#52020
Change-Id: I4f506fe094fa7c5532de23467a4f9139476bb0a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/396614
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Use the 1.17 compiler error message, sans "array" prefix.
Change-Id: I0e70781c5ff02dca30a2004ab4d0ea82b0849eae
Reviewed-on: https://go-review.googlesource.com/c/go/+/396296
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Historically, we sometimes recorded imports based on either package
path ("net/http") or object file path ("net/http.a"). But modern Go
build systems always use package path, and the extra ".a" suffix
doesn't mean anything anyway.
Change-Id: I6060ef8bafa324168710d152a353f4d8db062133
Reviewed-on: https://go-review.googlesource.com/c/go/+/395254
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This CL updates test/run.go to compile xxx.dir/x.go with a package
path of "test/x" instead of just "x". This prevents collisions with
standard library packages.
It also requires updating a handful of tests to account for the
updated package paths.
Fixes#25693.
Change-Id: I49208c56ab3cb229ed667d547cd6e004d2175fcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/395258
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
bug302 compiles p.go with -p=p, and then manually creates a pp.a
archive, and imports it as both "p" and "pp". This is a misuse of
cmd/compile's -p flag, and it isn't representative of how any actual
Go build systems work anyway.
This test made sense back when cmd/compile still wrote out bare object
files, which was then split into separate __.PKGDEF and _go_.o archive
entries when added to a pack archive. But since CL 102236, cmd/compile
always writes out pack files.
Updates #51734.
Change-Id: I4b5de22d348ecc0a72c98b512351c2d267c77736
Reviewed-on: https://go-review.googlesource.com/c/go/+/393896
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, run.go's *dir tests allow "x.go" to be imported
interchangeably as either "x" or "./x". This is generally fine, but
can cause problems when "x" is the name of a standard library
package (e.g., "fixedbugs/bug345.dir/io.go").
This CL is an automated rewrite to change all `import "x"` directives
to use `import "./x"` instead. It has no effect today, but will allow
subsequent CLs to update test/run.go to resolve "./x" to "test/x" to
avoid stdlib collisions.
Change-Id: Ic76cd7140e83b47e764f8a499e59936be2b3c876
Reviewed-on: https://go-review.googlesource.com/c/go/+/395116
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 342350 fixed deadcode panic with dead hidden closures. However, a
closure may contains nested dead hidden closures, so we need to mark
them dead as well.
Fixes#51839
Change-Id: Ib54581adfc1bdea60e74d733cd30fd8e783da983
Reviewed-on: https://go-review.googlesource.com/c/go/+/394079
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The -p flag specifies the import path of the package being compiled.
This CL makes it required when invoking the compiler and
adjusts tests that invoke the compiler directly to conform to this
new requirement. The go command already passes the flag, so it
is unmodified in this CL. It is expected that any other Go build systems
also already pass -p, or else they will need to arrange to do so before
updating to Go 1.19. Of particular note, Bazel already does for rules
with an importpath= attribute, which includes all Gazelle-generated rules.
There is more cleanup possible now in cmd/compile, cmd/link,
and other consumers of Go object files, but that is left to future CLs.
Additional historical background follows but can be ignored.
Long ago, before the go command, or modules, or any kind of
versioning, symbols in Go archive files were named using just the
package name, so that for example func F in math/rand and func F in
crypto/rand would both be the object file symbol 'rand.F'. This led to
collisions even in small source trees, which made certain packages
unusable in the presence of other packages and generally was a problem
for Go's goal of scaling to very large source trees.
Fixing this problem required changing from package names to import
paths in symbol names, which was mostly straightforward. One wrinkle,
though, is that the compiler did not know the import path of the
package being compiled; it only knew the package name. At the time,
there was no go command, just Makefiles that people had invoking 6g
(now “go tool compile”) and then copying the resulting object file to
an importable location. That is, everyone had a custom build setup for
Go, because there was no standard one. So it was not particularly
attractive to change how the compiler was invoked, since that would
break approximately every Go user at the time. Instead, we arranged
for the compiler to emit, and other tools reading object files to
recognize, a special import path (the empty string, it turned out)
denoting “the import path of this object file”. This worked well
enough at the time and maintained complete command-line compatibility
with existing Go usage.
The changes implementing this transition can be found by searching
the Git history for “package global name space”, which is what they
eliminated. In particular, CL 190076 (a6736fa4), CL 186263 (758f2bc5),
CL 193080 (1cecac81), CL 194053 (19126320), and CL 194071 (531e6b77)
did the bulk of this transformation in January 2010.
Later, in September 2011, we added the -p flag to the compiler for
diagnostic purposes. The problem was that it was easy to create import
cycles, especially in tests, and these could not be diagnosed until
link time. You'd really want the compiler to diagnose these, for
example if the compilation of package sort noticed it was importing a
package that itself imported "sort". But the compilation of package
sort didn't know its own import path, and so it could not tell whether
it had found itself as a transitive dependency. Adding the -p flag
solved this problem, and its use was optional, since the linker would
still diagnose the import cycle in builds that had not updated to
start passing -p. This was CL 4972057 (1e480cd1).
There was still no go command at this point, but when we introduced
the go command we made it pass -p, which it has for many years at this
point.
Over time, parts of the compiler began to depend on the presence of
the -p flag for various reasonable purposes. For example:
In CL 6497074 (041fc8bf; Oct 2012), the race detector used -p to
detect packages that should not have race annotations, such as
runtime/race and sync/atomic.
In CL 13367052 (7276c02b; Sep 2013), a bug fix used -p to detect the
compilation of package reflect.
In CL 30539 (8aadcc55; Oct 2016), the compiler started using -p to
identify package math, to be able to intrinsify calls to Sqrt inside
that package.
In CL 61019 (9daee931; Sep 2017), CL 71430 (2c1d2e06; Oct 2017), and
later related CLs, the compiler started using the -p value when
creating various DWARF debugging information.
In CL 174657 (cc5eaf93; May 2019), the compiler started writing
symbols without the magic empty string whenever -p was used, to reduce
the amount of work required in the linker.
In CL 179861 (dde7c770; Jun 2019), the compiler made the second
argument to //go:linkname optional when -p is used, because in that
case the compiler can derive an appropriate default.
There are more examples. Today it is impossible to compile the Go
standard library without using -p, and DWARF debug information is
incomplete without using -p.
All known Go build systems pass -p. In particular, the go command
does, which is what nearly all Go developers invoke to build Go code.
And Bazel does, for go_library rules that set the importpath
attribute, which is all rules generated by Gazelle.
Gccgo has an equivalent of -p and has required its use in order to
disambiguate packages with the same name but different import paths
since 2010.
On top of all this, various parts of code generation for generics
are made more complicated by needing to cope with the case where -p
is not specified, even though it's essentially always specified.
In summary, the current state is:
- Use of the -p flag with cmd/compile is required for building
the standard library, and for complete DWARF information,
and to enable certain linker speedups.
- The go command and Bazel, which we expect account for just
about 100% of Go builds, both invoke cmd/compile with -p.
- The code in cmd/compile to support builds without -p is
complex and has become more complex with generics, but it is
almost always dead code and therefore not worth maintaining.
- Gccgo already requires its equivalent of -p in any build
where two packages have the same name.
All this supports the change in this CL, which makes -p required
and adjusts tests that invoke cmd/compile to add -p appropriately.
Future CLs will be able to remove all the code dealing with the
possibility of -p not having been specified.
Change-Id: I6b95b9d4cffe59c7bac82eb273ef6c4a67bb0e43
Reviewed-on: https://go-review.googlesource.com/c/go/+/391014
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If you attempt to instantiate a generic type or func and run 'go build'
with a language version < 1.18 in the 'go' directive inside the go.mod
file, cmd/compile emits a friendly message that includes the suggestion
to 'check go.mod':
type instantiation requires go1.18 or later (-lang was set to go1.17; check go.mod)
However, if the code instead only declares a generic type or func
without instantiating, cmd/compile currently emits a less friendly
message:
type parameters require go1.18 or later
With this CL, the error in that situation becomes:
type parameter requires go1.18 or later (-lang was set to go1.17; check go.mod)
Within cmd/compile/internal/types2, it already calls check.versionErrorf
in a dozen or so places, including three existing calls to
check.versionErrorf within typeset.go (e.g., for embedding a constraint
interface).
This CL adds two more calls to check.versionErrorf, replacing calls to
check.softErrorf. Both check.versionErrorf and check.softErrorf call
check.err(at, <string>, true) after massaging the string message.
Fixes#51531
Change-Id: If54e179f5952b97701d1dfde4abb08101de07811
GitHub-Last-Rev: b0b7c1346f
GitHub-Pull-Request: golang/go#51536
Reviewed-on: https://go-review.googlesource.com/c/go/+/390578
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Findley <rfindley@google.com>
Also correct scope position for such variables.
Adjusted some comments.
Fixes#51437.
Change-Id: Ic49a1459469c8b2c7bc24fe546795f7d56c67cb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/389594
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Findley <rfindley@google.com>
We use AutogeneratedPos for most compiler-generated functions. But
for method value wrappers we currently don't. Instead, we use the
Pos for their (direct) declaration if there is one, otherwise
not set it in methodValueWrapper, which will probably cause it to
inherit from the caller, i.e. the Pos of that method value
expression. If that Pos has inline information, it will cause the
method wrapper to have bogus inline information, which could lead
to infinite loop when printing a stack trace.
Change it to use AutogeneratedPos instead.
Fixes#51401.
Change-Id: I398dfe85f9f875e1fd82dc2f489dab63ada6570d
Reviewed-on: https://go-review.googlesource.com/c/go/+/388794
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The next CL will remove the -G flag, effectively hard-coding it to its
current default (-G=3).
Change-Id: Ib4743b529206928f9f1cca9fdb19989728327831
Reviewed-on: https://go-review.googlesource.com/c/go/+/388534
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Pointer comparison is lowered to the following on RISCV64
(EqPtr x y) => (SEQZ (SUB <x.Type> x y))
The difference of two pointers (the SUB) should not be pointer
type. Otherwise it can cause the GC to find a bad pointer.
Should fix#51101.
Change-Id: I7e73c2155c36ff403c032981a9aa9cccbfdf0f64
Reviewed-on: https://go-review.googlesource.com/c/go/+/385655
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change-Id: Ie949f2131845f9f9292caff798f6933648779122
Reviewed-on: https://go-review.googlesource.com/c/go/+/385434
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
If an invalid array length is just an identifier, mention
"array length" so that it's clear this is an invalid array
declaration and not a (invalid) generic type declaration.
Fixes#51145.
Change-Id: I8878cbb6c7b1277fc0a9a014712ec8d55499c5c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/385255
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change run.go to apply the GO_TEST_TIMEOUT_SCALE scaling factor to
test timeouts (mentioned in "-t" clause in test header).
Also with this patch, bump up the timeout for fixedbugs/issue46234.go
from 30 to 45 seconds, to avoid flakes on very slow builders.
Updates #50973.
Change-Id: Icbafa482860e24cc1e72fee53511bcc764d06bf1
Reviewed-on: https://go-review.googlesource.com/c/go/+/382774
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Refactor Checker.comparison such that its logic is easier to reason
about and so that special cases can be handled more directly.
Use the appropriate operand (of 1st or 2nd operand) for error
reporting (position and type), rather than always using the
first operand.
Use an extra parameter to indicate a switch case
comparison; in this case the error is always reported at
the position of the first operand. (The error messages are
not yet adjusted for switches; see next CL.)
Introduce a new kindString function which is used to print simplified
types in error messages (related to comparisons only): instead of
printing the details of a struct type, we just print "struct" where
the details are not relevant. This matches the 1.17 compiler behavior.
Added a "reportf" parameter to the internal comparable function so we
can report an error cause in addition to the boolean result. Rather
than passing a *string for cause, we pass a function to record the
cause so that we can use the *Checker context for printing (needed
for proper type qualification). This mechanism reports the same
details now as the 1.17 compiler.
Adjusted various tests as needed added new test files.
Fixes#50918.
Change-Id: I1f0e7af22f09db4d31679c667c71a9038a8dc9d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/381964
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This makes the error case pointed out in the issue like the current
message in Go 1.17 or -G=0 mode. The priority is to point out the
similar but wrong method name, rather than a difference in type.
Made changes to both cmd/compile/internal/types2 and go/types.
Added in a missing tab in an error message in go/types.
At the same time, removed the extra "at info" on the have lines (and
pointer receiver lines) of error messages, as requested in #50907.
Fixes#50816Fixes#50907
Change-Id: I04f8151955bdb6192246cbcb59adc1c4b8a2c4e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/381774
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
These can go wrong when one of the operands is the minimum integer value.
Fixes#50854.
Change-Id: I238fe284f60c7ee5aeb9dc9a18e8b1578cdb77d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/381318
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Slightly better for cases such as string(1 << s).
Leaves type-checker tests alone for now because
there are multiple dozens.
For #45117.
Change-Id: I47b314c713fabe424c2158674bf965416a8a6f5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/379274
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For an extension operation like MOWWreg, if the operand is already
extended, we optimize the second extension out. Usually a LoadReg
of a proper type would come already extended, as a MOVW/MOVWU etc.
instruction does. But for a LoadReg to a floating point register,
the instruction does not do the extension. So we cannot elide the
extension.
Fixes#50671.
Change-Id: Id8991df78d5acdecd3fd6138c558428cbd5f6ba3
Reviewed-on: https://go-review.googlesource.com/c/go/+/379236
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently the code handles the case of returning values from
a function with no result parameters as a special case.
Consider this input:
package p
func f0_2() { return 1, 2 }
func f0_1() { return 1 }
func f1_0() int { return }
func f1_2() int { return 1, 2 }
func f2_0() (int, int) { return }
func f2_1() (int, int) { return 1 }
The errors are:
x.go:3:33: no result values expected <<<
x.go:4:33: no result values expected <<<
x.go:5:26: not enough return values
have ()
want (int)
x.go:6:36: too many return values
have (number, number)
want (int)
x.go:7:26: not enough return values
have ()
want (int, int)
x.go:8:33: not enough return values
have (number)
want (int, int)
There are two problems with the current special case emitting the
errors on the marked line:
1. It calls them 'result values' instead of 'return values'.
2. It doesn't show the type being returned, which can be useful to programmers.
Using the general case solves both these problems,
so this CL removes the special case and calls the general case instead.
Now those two errors read:
x.go:3:33: too many return values
have (number, number)
want ()
x.go:4:33: too many return values
have (number)
want ()
Fixes#50653.
Change-Id: If6b47dcece14ed4febb3a2d3d78270d5be1cb24d
Reviewed-on: https://go-review.googlesource.com/c/go/+/379116
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Using type aliases, it's possible to create structs with embedded
fields that have no corresponding type literal notation. However, we
still need to generate a unique name for these types to use for linker
symbols. This CL introduces a new "struct{ Name = Type }" syntax for
use in LinkString formatting to represent these types.
Reattempt at CL 372914, which was rolled back due to race-y
LocalPkg.Lookup call that isn't safe for concurrency.
Fixes#50190.
Change-Id: I0b7fd81e1b0b3199a6afcffde96ade42495ad8d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/378434
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
With this change, we shall now see:
*myS does not implement S (wrong type for DoSomething method)
have DoSomething() (string, error) at ./main.go:9:14
want DoSomething() (int, error)
instead of previously:
*myS does not implement S (wrong type for DoSomething method)
have DoSomething() (string, error)
want DoSomething() (int, error)
Fixes#42841Fixes#45813
Change-Id: I66990929e39b0d36f2e91da0d92f60586a9b84e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/373634
Trust: Robert Findley <rfindley@google.com>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For some reason, aix sometimes executes the bogus function body. This
should never happen as it lives in a no-execute section. It might be
a transient permission blip as the heap grows.
Add a small function to cleanup and synchronize the icache before
jumping to the bogus function to ensure it causes a panic, not SIGILL.
Fixes#44583
Change-Id: Iadca62d82bfb70fc62088705dac42a880a1208fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/377314
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
I made the default be that, where there are differences between types2
and -G=0 error messages, we want errorcheck tests to pass types2.
Typically, we can get errorcheck to pass on types2 and -G=0 if they give
the same number of error messages on the same lines, just different
wording. If they give a different number of error messages, then I made
types2 pass. I added an exception list for -G=0 to cover those cases
where -G=0 and types give different numbers of error messages.
Because types2 does not run if there are syntax errors, for several
tests, I had to split the tests into two parts in order to get all the
indicated errors to be reported in types2 (bug228.go, bug388.go,
issue11610.go, issue14520.go)
I tried to preserve the GCCGO labeling correctly (but may have gotten
some wrong). When types2 now matches where a GCCGO error previously
occurred, I transformed GCCGO_ERROR -> ERROR. When types2 no longer
reports an error in a certain place, I transformed ERROR -> GCCGO_ERROR.
When types2 reports an error in a new place, I used GC_ERROR.
The remaining entries in types2Failures are things that I think we
probably still need to fix - either actually missing errors in types2,
or cases where types2 gives worse errors than -G=0.
Change-Id: I7f01e82b322b16094096b67d7ed2bb39b410c34f
Reviewed-on: https://go-review.googlesource.com/c/go/+/372854
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- detect *interface case and report specific error
- replaced switch with sequence of if's for more clarity
- fixed isInterfacePtr: it applies to all interfaces, incl.
type parameters
- reviewed/fixed all uses of isInterfacePtr
- adjusted error messages to be consistently of the format
"type %s is pointer to interface, not interface"
Fixes#48312.
Change-Id: Ic3c8cfcf93ad57ecdb60f6a727cce9e1aa4afb5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/376914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Using type aliases, it's possible to create structs with embedded
fields that have no corresponding type literal notation. However, we
still need to generate a unique name for these types to use for linker
symbols. This CL introduces a new "struct{ Name = Type }" syntax for
use in LinkString formatting to represent these types.
Fixes#50190.
Change-Id: I025ceb09a86e00b7583d3b9885d612f5d6cb44fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/372914
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
types2 allows the conversion of a slice of a user-defined byte type B
(not builtin uint8 or byte) to string. But runtime.slicebytetostring
requires a []byte argument, so add in a CONVNOP from []B to []byte if
needed. Same for the conversion of a slice of user-defined rune types to
string.
I made the same change in the transformations of the old typechecker, so
as to keep tcConv() and transformConv() in sync. That fixes the bug for
-G=0 mode as well.
Fixes#23536
Change-Id: Ic79364427f27489187f3f8015bdfbf0769a70d69
Reviewed-on: https://go-review.googlesource.com/c/go/+/376056
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #50439
Change-Id: Ifad6e6f8de42121c695b5a4dc56e0f6606e2917e
Reviewed-on: https://go-review.googlesource.com/c/go/+/375796
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Trust: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The builtin "any" type should only be identical to an unnamed empty
interface type, not a defined empty interface type.
Fixes#50169.
Change-Id: Ie5bb88868497cb795de1fd0276133ba9812edfe4
Reviewed-on: https://go-review.googlesource.com/c/go/+/372217
Trust: Cherry Mui <cherryyz@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Enable a bunch of types2-related error tests to run successfully, so
they no longer have to be disabled in run.go.
- directive.go: split it into directive.go and directive2.go, since the
possible errors are now split across the parser and noder2, so they
can't all be reported in one file.
- linkname2.go: similarly, split it into linkname2.go and linkname3.go
for the same reason.
- issue16428.go, issue17645.go, issue47201.dir/bo.go: handle slightly
different wording by types2
- issue5609.go: handle slight different error (array length must be
integer vs. array bound too large).
- float_lit3.go: handle slightly different wording (overflows
float vs cannot convert to float)
I purposely didn't try to fix tests yet where there are extra or missing
errors on different lines, since that is not easy to make work for both
-G=3 and -G=0. In a later change, will flip to make the types2 version
match correctly, vs. the -G=0 version.
Change-Id: I6079ff258e3b90146335b9995764e3b1b56cda59
Reviewed-on: https://go-review.googlesource.com/c/go/+/368455
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
First, we need to set base.Pos in varDecl() and typeDecl(), so it will
be correct if we need to report type size errors while converting types.
Changed error calls in types/sizes.go to use Errorf, not ErrorfAt, since
we want to use base.Pos (which will set from t.Pos(), if that is
available).
Second, we need to add an extra call CalcSize(t1.Elem()) in the
TCHANARGS case of CalcSize(). We can use CalcSize() rather than
CheckSize(), since we know the top-level recursive type will have been
calculated by the time we process the fake TCHANARGS type. In -G=0 mode,
the size of the channel element has often been calculated because of
some other processing (but not in the case of #49767). But in -G=3 mode,
we just calculate sizes during the single noder2 pass, so we are more
likely to have not gotten to calculating the size of the element yet,
depending on the order of processing of the deferredTypeStack.
Fixes the tests fixedbugs/issue{42058a,42058b}.go that were
disabled for -G=3 mode.
Had to add exceptions in stdlib_test.go for go/types and types2, because
the types2 typechecker does not know about type size limits.
Fixes#49814Fixes#49771
Updates #49767
Change-Id: I77d058e8ceff68a58c4c386a8cf46799c54b04c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/367955
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Thanks to emmanuel@orijtech.com who wrote the initial version of
this change (CL 354490).
This change is following CL 354490 in idea but also contains various
simplifications, slightly improved printing of signature/type patterns,
adjustments for types2, and some fine-tuning of error positions.
Also adjusted several ERROR regexp patterns.
Fixes#48834.
Fixes#48835.
Change-Id: I31cf20c81753b1dc84836dbe83a39030ceb9db23
Reviewed-on: https://go-review.googlesource.com/c/go/+/364874
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
When we have a typed nil, we already say so; thus it is sufficient
to use "nil" in all the other cases.
This is closer to (1.17) compiler behavior. In cases where the
1.17 compiler prints "untyped nil" (e.g., wrong uses of "copy"),
we already print a different message. We can do better in those
cases as well; will be addressed in a separate CL (see #49735).
Fixes#48852.
Change-Id: I9a7a72e0f99185b00f80040c5510a693b1ea80f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/366276
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For -G=3 for test using 'any'.
Change-Id: Ia37ee944a38be4f4330e62ad187f10f2d42e41bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/365839
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
`types.Types[types.TINTER]` is already used for `interface{}`, so we
can conveniently just extend the existing logic that substitutes
`byte` and `rune` with `uint8` and `int32` to also substitute `any`.
Fixes#49665.
Change-Id: I1ab1954699934150aab899b35037d5611c8ca47e
Reviewed-on: https://go-review.googlesource.com/c/go/+/365354
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Use actual unmapped memory instead of small integers to make
pointers that will fault when accessed.
Fixes#49562
Change-Id: I2c60c97cf80494dd962a07d10cfeaff6a00f4f8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/364914
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 364377 emitted definition of 'any' when compiling runtime. But 'any'
is only available when generic enabled. Thus emitting its definition
unconditionally causes the compiler crashes.
Updates #49619
Change-Id: I0888ca1cbc7a7df300310a99a344f170636333f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/364614
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Include the predefined type 'any' in the list of other important
predefined types that are emitted when compiling the runtime package
(uintptr, string, etc).
Fixes#49619.
Change-Id: I4a851ba2f302fbc3a425e65daa325c6bf83659da
Reviewed-on: https://go-review.googlesource.com/c/go/+/364377
Trust: Than McIntosh <thanm@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
A recent change to error message formatting was missing a nil check.
Fixes#49592
Change-Id: Ic1843e0277ba75eec0e8e41fe34b59c323d7ea31
Reviewed-on: https://go-review.googlesource.com/c/go/+/364034
Trust: Robert Findley <rfindley@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This test is failing with -G=0, so specify -G=3.
Change-Id: I4c74707d0a43f8191cb0b156204604458ba85136
Reviewed-on: https://go-review.googlesource.com/c/go/+/363699
Trust: Robert Findley <rfindley@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When being used by the compiler, augment the types2 missing method
message with extra info, if a method is missing, but a method with the
correct name except for case (i.e. equal via string.EqualFold()) is
present. In that case, print out the wanted method and the method that
is present (that has the wrong case).
In the 1.17 compiler, we don't do this case-folding check when assigning
an interface to an interface, so I didn't add that check, but we could
add that.
Fixes#48471
Change-Id: Ic54549c1f66297c9221d979d49c1daa719aa66cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/363437
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When being used by the compiler, fix up types2 error messages to be more
like Go 1.17 compiler errors. In particular:
- add information about which method is missing when a type is not
assignable/convertible/etc. to an interface.
- add information about any existing method which has the same name,
but wrong type.
- add extra hint in the case that the source or destination type is a
pointer to an interface, rather than an interface.
- add extra hint "need type assertion" in the case that the source is
an interface that is implemented by the destination.
- the following change in the CL stack also adds information about any
existing method with a different name that only differs in case.
Include much of the new logic in a new common function
(*Checker).missingMethodReason().
types2 still adds a little more information in some cases then the Go
1.17 compiler. For example, it typically says "(value of type T)",
rather than "(type T)", where "value" could also be "constant",
"variable", etc.
I kept the types2 error messages almost all the same when types2 is not
used by the compiler. The only change (to reduce amount of compatibility
code) was to change "M method" phrasing in one case to "method M"
phrasing in one error message (which is the phrasing it uses in all
other cases). That is the reason that there are a few small changes in
types2/testdata/check/*.src.
Added new test test/fixedbugs/issue48471.go to test that the added
information is appearing correctly.
Also adjusted the pattern matching in a bunch of other
test/fixedbugs/*.go, now that types2 is producing error messages closer
to Go 1.17. Was able to remove a couple test files from the types2
exception list in run.go.
Updated #48471
Change-Id: I8af1eae6eb8a5541d8ea20b66f494e2e795e1956
Reviewed-on: https://go-review.googlesource.com/c/go/+/363436
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #49512
Change-Id: Ic08652a4ec611b27150bf10b1118c1395715e5d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/363156
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
CL 361411 improved error message for go version requirement, but forgot
to update the test in cmd/go to match new error message. That causes
longtest builders failed.
This CL changes mod_vendor_goversion.txt to match compiler error, and
limit fixedbugs/issue49368.go to run with -G=3 only.
Updates #49368
Change-Id: I125fe0a8c2a1595066d39c03e97819e7a1274e0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/361963
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The openDeferRecord always insert vardef/varlive pairs into the entry block, it may destroy the mem chain when LECall's args are writing into the same block. So create a new block before that happens.
Fixes#49282
Change-Id: Ibda6c4a45d960dd412a641f5e02276f663c80785
Reviewed-on: https://go-review.googlesource.com/c/go/+/361410
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Trust: Than McIntosh <thanm@google.com>
Reviewed-by: David Chase <drchase@google.com>
CL 360057 fixed missing update source type in storeArgOrLoad. However,
we should only update the type when processing struct/array. If we
update the type right before calling storeArgOrLoad, we may generate a
value with invalid type, e.g, OpStructSelect with non-struct type.
Fixes#49378
Change-Id: Ib7e10f72f818880f550aae5c9f653db463ce29b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/361594
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
After removing trivial wrapper types, the source needs to be updated
with new type, otherwise, it leads to mismatch between field offset and
the source type for selecting struct/array.
Fixes#49249
Change-Id: I26f9440bcb2e78bcf0617afc21d9d40cdbe4aca6
Reviewed-on: https://go-review.googlesource.com/c/go/+/360057
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When seeing Key:Value expression in slice literal, the compiler only
needs to emit tmp var for the Value, not the whole expression.
Fixes#49240
Change-Id: I7bda3c796a93c0fa1974f7c5930f38025dfa665c
Reviewed-on: https://go-review.googlesource.com/c/go/+/360055
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fix two defer bugs related to adding/removing open defer entries.
The bugs relate to the way that we add and remove open defer entries
from the defer chain. At the point of a panic, when we want to start
processing defer entries in order during the panic process, we need to
add entries to the defer chain for stack frames with open defers, since
the normal fast-defer code does not add these entries. We do this by
calling addOneOpenDeferFrame() at the beginning of each time around the
defer loop in gopanic(). Those defer entries get sorted with other open
and non-open-coded defer frames.
However, the tricky part is that we also need to remove defer entries if
they end not being needed because of a recover (which means we are back
to executing the defer code inline at function exits). But we need
to deal with multiple panics and in-process defers on the stack, so we
can't just remove all open-coded defers from the the defer chain during
a recover.
The fix (and new invariant) is that we should not add any open-coded
defers to the defer chain that are higher up the stack than an open-coded
defer that is in progress. We know that open-coded defer will still be
run until completed, and when it is completed, then a more outer frame
will be added (if there is one). This fits with existing code in gopanic
that only removes open-coded defer entries up to any defer in progress.
These bugs were because of the previous inconsistency between adding and
removing open defer entries, which meant that stale defer entries could
be left on the list, in these unusual cases with both recursive
panics plus multiple independent (non-nested) cases of panic & recover.
The test for #48898 was difficult to add to defer_test.go (while keeping
the failure mode), so I added as a go/test/fixedbug test instead.
Fixes#43920
Updates #43941Fixes#48898
Change-Id: I593b77033e08c33094315abf8089fbc4cab07376
Reviewed-on: https://go-review.googlesource.com/c/go/+/356011
Trust: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
Fixes#49110
Change-Id: I32c2cb26cca067a4a676ce4bbc3e51f1e0cdb259
Reviewed-on: https://go-review.googlesource.com/c/go/+/357959
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Kortschak <dan@kortschak.io>
Reviewed-by: Sebastien Binet <s@sbinet.org>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For base generic type that is written to export file, we need to mark
all of its methods, include exported+unexported methods, as reachable,
so they can be available for instantiation if necessary. But markType
only looks for exported methods, thus causing the crash in #49143.
To fix this, we introduce new method p.markGeneric, to mark all methods
of the base generic type.
This issue has happend for a while (maybe since we add generic
import/export during go1.18 cycle), and was un-intentionally "fixed" in
CL 356254, when we agresssively call p.markEmbed(t). CL 357232 fixed
that wrong agressive behavior, thus reproduce the bug on tip.
Fixes#49143
Change-Id: Ie64574a05fffb282e9dcc8739df4378c5b6b0468
Reviewed-on: https://go-review.googlesource.com/c/go/+/358814
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
CL 357649 fixes inlining labeled FOR/RANGE loops,
we should do same translation for inlined SWITCH's label
Fixes#49145
Change-Id: I9a6f365f57e974271a1eb279b38e81f9b5148788
Reviewed-on: https://go-review.googlesource.com/c/go/+/358315
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
removePred and removeArg do different things. removePred moves the last
predecessor to index k, whereas removeArg slides all the args k or
greater down by 1 index.
Kind of unfortunate different behavior in things named similarly.
Fixes#49122
Change-Id: I9ae409bdac744e713f4c121f948e43db6fdc8542
Reviewed-on: https://go-review.googlesource.com/c/go/+/358117
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Since CL 282892, functions are always compiled before closures. To do
that, when walking the closure, it is added to its outer function queue
for scheduling compilation later. Thus, a closure may be added to queue
more than once, causing the ICE dues to being compiled twice.
To fix this, catching the re-walking of the closure expression and do
not add it to the compilation queue.
Fixes#49029
Change-Id: I7d188e8f5b4d5c4248a0d8e6389da26f1084e464
Reviewed-on: https://go-review.googlesource.com/c/go/+/357960
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 356254 fixed crawling of embeddable types during inline. However, we
are too agressive, since when we call markEmbed for every type seen
during inlining function body. That leads to false positive that for a
non-embedded type, its unexported methods are also marked inline.
Instead, we should only look at struct type that we seen during inlining
function body, and calling markEmbed for all of its embedded fields.
Fixes#49094
Change-Id: I6ef9a8bf1fc649ec6bf75e4883f6031ec8560ba1
Reviewed-on: https://go-review.googlesource.com/c/go/+/357232
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There is already a mechanism using inlgen to rename labels insided
inlined functions so that they are unique and don't clash with loops in
the outer function. This is used for OLABEL and OGOTO. Now that we are
doing inlining of OFOR loops, we need to do this translation for OBREAK,
OCONTINUE, and OFOR. I also added the translation for ORANGE loops, in
anticipation of a CL that will allow inlining of ORANGE for loops.
Fixes#49100
Change-Id: I2ccddc3350370825c386965f4a1e4bc54d3c369b
Reviewed-on: https://go-review.googlesource.com/c/go/+/357649
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
In CL 327872, there's a fix for crawling of embeddable types directly
reached by the user, so all of its methods need to be re-exported. But
we missed the cased when an un-exported type may be reachable by
embedding in exported type. Example:
type t struct {}
func (t) M() {}
func F() interface{} { return struct{ t }{} }
We generate the wrapper for "struct{ t }".M, and when inlining call to
"struct{ t }".M makes "t.M" reachable.
It works well, and only be revealed in CL 327871, when we changed
methodWrapper to always call inline.InlineCalls, thus causes the crash
in #49016, which involve dot type in inlined function.
Fixes#49016
Change-Id: If174fa5575132da5cf60e4bd052f7011c4e76c5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/356254
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL addresses the 2nd part of the issue below.
- For types2, now use the same error messages as the compiler in this case.
- Make the mechanism for reporting clarifying error messages handle the case
where we don't have additional position information.
- Provide context information (type assertion vs type switch).
Fixes#49005.
Change-Id: I4eeaf4f0c3f2f8735b63993778f58d713fef21ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/356512
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This CL avoids a useless follow-on error (that gets reported before the
actual error due to source position). This addresses the first part of
the issue below.
Thanks to @cuonglm for the suggestion for the fix.
For #49005.
Change-Id: Ifdd83072a05c32e115dc58a0233868a64f336f3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/356449
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
We reuse a value for the same selector on the same arg. But if the
value is already marked dead, don't reuse it. A use of an
OpInvalid will confuse the compiler.
Fixes#48916.
Change-Id: I15b9e15b49f6e1991fe91df246cd12a193385e85
Reviewed-on: https://go-review.googlesource.com/c/go/+/355409
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This test is currently failing in the longtest builders.
I do not know how or why the builders are adding the -G=0 parameter.
Updates #48784
Change-Id: I62248d3fbc47567a8c73b4868a2d4aeb0bc47bc3
Reviewed-on: https://go-review.googlesource.com/c/go/+/354631
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
In case of an invalid untyped nil conversion, the compiler's original
type checker leaves it to the caller to report a suitable error message.
But types2 does not, it always reports the invalid conversion.
CL 328053 made types2 report a better error message, and match the
original compiler behavior. But it ignored the case of untyped nil.
This CL adds that missing case, by checking whether the two operands can
be mixed when untyped nil is present.
Fixes#48784
Change-Id: Idc7d86eb0245aa18ca428e278f4416d6b3679058
Reviewed-on: https://go-review.googlesource.com/c/go/+/354049
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
For #33232.
Change-Id: Id95a92bfdad91e3ccde9f5654c3b1b02ca95f6ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/351731
Trust: Robert Griesemer <gri@golang.org>
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Agressively mark all LHS variables in assignments as used if there
is any error in the (entire) assignment. This reduces the number of
spurious "declared but not used" errors in programs that are invalid
in the first place. This behavior is closer to the behavior of the
compiler's original type checker (types1) and lets us remove lines
of the form "_ = variable" just to satisfy test cases. It also makes
more important errors visible by not crowding them out.
Remove the Checker.useLHS function and use Checker.use instead:
useLHS didn't evaluate top-level variables, but we actually want
them to be evaluated in an error scenario so that they are getting
used (and thus we don't get the "declared but not used" error).
Fixes#42937.
Change-Id: Idda460f6b81c66735bf9fd597c54188949bf12b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/351730
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When used with the compiler, types2 will report assignment error
messages that closely match what the compiler type checker (types1)
produces.
Also, mark lhs variables as used in invalid variable initializations
to avoid a class of follow-on errors.
Fixes#48558.
Change-Id: I92d1de006c66b3a2364bb1bea773a312963afe75
Reviewed-on: https://go-review.googlesource.com/c/go/+/351669
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Like other builtin functions, unsafe.Add's len operand is allowed to
be variable sized. However, unlike other builtins, it doesn't get
lowered to a runtime function call, so we never end up coercing it to
a specific type. As a result, we could end up constructing an OpAddPtr
value but with a less-than-ptr-sized addend operand.
This CL fixes this by always coercing the second operand to uintptr
during SSA construction.
Theoretically, we could do this during walk instead, but the frontend
doesn't allow converting negative constants to uintptr.
Fixes#48536.
Change-Id: Ib0619ea79df58b256b250fec967a6d3c8afea631
Reviewed-on: https://go-review.googlesource.com/c/go/+/351592
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Adjust types2 and go/types and some test cases.
Because `any` is not treated specially anymore in constraint
position we get additional errors in constraints if `any` is
used before Go1.18 (in addition to the error that type parameter
lists are not permitted before Go1.18).
Fixes#33232.
Change-Id: I85590c6094b07c3e494fef319e3a38d0217cf6f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/351456
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Ensure constant shift amounts are in the range [0-31]. When shift amounts
are out of range, bad things happen. Shift amounts out of range occur
when lowering 64-bit shifts (we take an in-range shift s in [0-63] and
calculate s-32 and 32-s, both of which might be out of [0-31]).
The constant shift operations themselves still work, but their shift
amounts get copied unmolested to operations like ORshiftLL which use only
the low 5 bits. That changes an operation like <<100 which unconditionally
produces 0, to <<4, which doesn't.
Fixes#48476
Change-Id: I87363ef2b4ceaf3b2e316426064626efdfbb8ee3
Reviewed-on: https://go-review.googlesource.com/c/go/+/350969
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
