As we have seen many times, the type checker must be careful to avoid
accessing named type information before the type is fully set up. We
need a more systematic solution to this problem, but for now avoid one
case that causes a crash: checking a selector expression on an
incomplete type when a type expression is expected.
For golang/go#57522
Change-Id: I7ed31b859cca263276e3a0647d1f1b49670023a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/461577
Run-TryBot: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
These typos were found by executing grep, aspell, sort, and uniq in
a pipe and searching the resulting list manually for possible typos.
grep -r --include '*.go' -E '^// .*$' . | aspell list | sort | uniq
Change-Id: I56281eda3b178968fbf104de1f71316c1feac64f
GitHub-Last-Rev: e91c7cee34
GitHub-Pull-Request: golang/go#57669
Reviewed-on: https://go-review.googlesource.com/c/go/+/460767
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Per the latest spec, we distinguish between interface implementation
and constraint satisfaction. Use the verb "satisfy" when reporting
an error about failing constraint satisfaction.
This CL only changes error messages. It has no impact on correct code.
Fixes#57564.
Change-Id: I6dfb3b2093c2e04fe5566628315fb5f6bd709f17
Reviewed-on: https://go-review.googlesource.com/c/go/+/460396
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Devirtualization can turn OCALLINTER into OCALLMETH, but then we want
to actually desugar into OCALLFUNC instead for later phases. Just
needs a missing call to typecheck.FixMethodCall.
Fixes#57309.
Change-Id: I331fbd40804e1a370134ef17fa6dd501c0920ed3
Reviewed-on: https://go-review.googlesource.com/c/go/+/457715
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
ARM64 maintains booleans in the low byte of registers. Upper parts
of that register are junk.
This rule is using all 32 bits of a boolean-containing register, which
is wrong. Change the rule to only look at the low bit.
Fixes#57184
Change-Id: Ibbef86b2be859df3d06d993db00e1231c481c428
Reviewed-on: https://go-review.googlesource.com/c/go/+/456556
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Change-Id: I4cff6b2a1fed6acdf754539c3c53a61eaa3b3f84
Reviewed-on: https://go-review.googlesource.com/c/go/+/450176
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 450136 added handling for simple calls in staticinit. If there's any
derived types conversion in the body of generic function called, that
conversion will require runtime dictionary, thus the optimization could
not happen.
Fixes#56923
Change-Id: I498cee9f8ab4397812ef79a6c2ab6c55e0ee4aef
Reviewed-on: https://go-review.googlesource.com/c/go/+/453315
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Gabriel Morency (Amgc63spaming) <morencyvincent8@gmail.com>
if q != nil {
p = &q.f
}
Which gets rewritten to a conditional move:
tmp := &q.f
p = Select q!=nil, tmp, p
Unfortunately, we can't compute &q.f before we've checked if q is nil,
because if it is nil, &q.f is an invalid pointer (if f's offset is
nonzero but small).
Normally this is not a problem because the tmp variable above
immediately dies, and is thus not live across any safepoint. However,
if later there is another &q.f computation, those two computations are
CSEd, causing tmp to be used at both use points. That will extend
tmp's lifetime, possibly across a call.
Fixes#56990
Change-Id: I3ea31be93feae04fbe3304cb11323194c5df3879
Reviewed-on: https://go-review.googlesource.com/c/go/+/454155
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
This was disabled in CL 452676 out of an abundance of caution,
but further analysis has shown that the failures were not being
caused by this optimization. Instead the sequence of commits was:
CL 450136 cmd/compile: handle simple inlined calls in staticinit
...
CL 449937 archive/tar, archive/zip: return ErrInsecurePath for unsafe paths
...
CL 451555 cmd/compile: fix static init for inlined calls
The failures in question became compile failures in the first CL
and started building again after the last CL.
But in the interim the code had been broken by the middle CL.
CL 451555 was just the first time that the tests could run and fail.
For #30820.
Change-Id: I65064032355b56fdb43d9731be2f9f32ef6ee600
Reviewed-on: https://go-review.googlesource.com/c/go/+/452817
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL adds -d=inlstaticinit to control whether static initialization
of inlined function calls (added in CL 450136) is allowed.
We've needed to fix it once already (CL 451555) and Google-internal
testing is hitting additional failure cases, so putting this
optimization behind a feature flag seems appropriate regardless.
Also, while we diagnose and fix the remaining cases, this CL also
disables the optimization to avoid miscompilations.
Updates #56894.
Change-Id: If52a358ad1e9d6aad1c74fac5a81ff9cfa5a3793
Reviewed-on: https://go-review.googlesource.com/c/go/+/452676
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This CL changes cmd/compile to reject anonymous interface cycles like:
type I interface { m() interface { I } }
We don't anticipate any users to be affected by this change in
practice. Nonetheless, this CL also adds a `-d=interfacecycles`
compiler flag to suppress the error. And assuming no issue reports
from users, we'll move the check into go/types and types2 instead.
Updates #56103.
Change-Id: I1f1dce2d7aa19fb388312cc020e99cc354afddcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/445598
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
The previous rule may move the phi value into a wrong block.
This CL make it only rewrite the phi value not the If block,
so that the phi value will stay in old block.
Fixes#56777
Change-Id: I9479a5c7f28529786968413d35b82a16181bb1f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/451496
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
For implementing interface to empty interface conversion, the compiler
generate code like:
var res *uint8
res = itab
if res != nil {
res = res.type
}
However, itab has type *uintptr, so the assignment is broken. The
problem is not shown up, until CL 450215, which call typecheck on this
broken assignment.
To fix this, just cast itab to *uint8 when doing the conversion.
Fixes#56768
Change-Id: Id42792d18e7f382578b40854d46eecd49673792c
Reviewed-on: https://go-review.googlesource.com/c/go/+/451256
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 450136 made the compiler to be able to handle simple inlined calls in
staticinit. However, it's missed a condition when checking substituting
arg for param. If there's any non-trivial closures, it has captured one
of the param, so the substitution could not happen.
Fixes#56778
Change-Id: I427c9134e333e2f9af136c1a124da4d37d326f10
Reviewed-on: https://go-review.googlesource.com/c/go/+/451555
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Cl 426334 removed its only usage, and now we have gcflags_noopt.
Change-Id: I3b33a8c868669deea00bf6dfcf8d81981504e293
Reviewed-on: https://go-review.googlesource.com/c/go/+/451255
Reviewed-by: Joedian Reid <joedian@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Given code like
func itou(i int) uint { return uint(i) }
var x = itou(-1)
the static inliner from CL 450136 was rewriting the code to
var x = uint(-1)
which is not valid Go code. Fix this by converting the
constants appropriately during inlining.
Fixes golang.org/x/image/vector test.
Change-Id: I13448df8504c6a70525b1cdc36e2c947e22cdd33
Reviewed-on: https://go-review.googlesource.com/c/go/+/451376
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Fix noopt build break from CL 450136 by not running test.
I can't reproduce the failure locally, but it's entirely reasonable
for this test to fail when optimizations are disabled, so just don't
run it when optimizations are disabled.
Change-Id: I882760fc7373ba0449379f81d295312a6be49be1
Reviewed-on: https://go-review.googlesource.com/c/go/+/450740
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Michael Stapelberg <stapelberg@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Global variable initializers like
var myErr error = &myError{"msg"}
have been converted to statically initialized data
from the earliest days of Go: there is no init-time
execution or allocation for that line of code.
But if the expression is moved into an inlinable function,
the static initialization no longer happens.
That is, this code has always executed and allocated
at init time, even after we added inlining to the compiler,
which should in theory make this code equivalent to
the original:
func NewError(s string) error { return &myError{s} }
var myErr2 = NewError("msg")
This CL makes the static initialization rewriter understand
inlined functions consisting of a single return statement,
like in this example, so that myErr2 can be implemented as
statically initialized data too, just like myErr, with no init-time
execution or allocation.
A real example of code that benefits from this rewrite is
all globally declared errors created with errors.New, like
package io
var EOF = errors.New("EOF")
Package io no longer has to allocate and initialize EOF each
time a program starts.
Another example of code that benefits is any globally declared
godebug setting (using the API from CL 449504), like
package http
var http2server = godebug.New("http2server")
These are no longer allocated and initialized at program startup either.
The list of functions that are inlined into static initializers when
compiling std and cmd (along with how many times each occurs) is:
cmd/compile/internal/ssa.StringToAux (3)
cmd/compile/internal/walk.mkmapnames (4)
errors.New (360)
go/ast.NewIdent (1)
go/constant.MakeBool (4)
go/constant.MakeInt64 (3)
image.NewUniform (4)
image/color.ModelFunc (11)
internal/godebug.New (12)
vendor/golang.org/x/text/unicode/bidi.newBidiTrie (1)
vendor/golang.org/x/text/unicode/norm.newNfcTrie (1)
vendor/golang.org/x/text/unicode/norm.newNfkcTrie (1)
For the cmd/go binary, this CL cuts the number of init-time
allocations from about 1920 to about 1620 (a 15% reduction).
The total executable code footprint of init functions is reduced
by 24kB, from 137kB to 113kB (an 18% reduction).
The overall binary size is reduced by 45kB,
from 15.335MB to 15.290MB (a 0.3% reduction).
(The binary size savings is larger than the executable code savings
because every byte of executable code also requires corresponding
runtime tables for unwinding, source-line mapping, and so on.)
Also merge test/sinit_run.go, which had stopped testing anything
at all as of CL 161337 (Feb 2019) and initempty.go into a new test
noinit.go.
Fixes#30820.
Change-Id: I52f7275b1ac2a0a32e22c29f9095071c7b1fac20
Reviewed-on: https://go-review.googlesource.com/c/go/+/450136
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
CL 440455 fixed missing walk pass for static initialization slice.
However, slicelit may produce un-typechecked node, thus we need to do
typecheck for sinit before calling walkStmtList.
Fixes#56727
Change-Id: I40730cebcd09f2be4389d71c5a90eb9a060e4ab7
Reviewed-on: https://go-review.googlesource.com/c/go/+/450215
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Add a new SSA opcode ISELZ, similar to ISELB to represent a select
of value or 0. Then, merge candidate ISEL opcodes inside the late
lower pass.
This avoids complicating rules within the the lower pass.
Change-Id: I3b14c94b763863aadc834b0e910a85870c131313
Reviewed-on: https://go-review.googlesource.com/c/go/+/442596
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
If an imported, non-generic function F transitively calls a generic
function G[T], we may need to call CanInline on G[T].
While here, we can also take advantage of the fact that we know G[T]
was already seen and compiled in an imported package, so we don't need
to call InlineCalls or add it to typecheck.Target.Decls. This saves us
from wasting compile time re-creating DUPOK symbols that we know
already exist in the imported package's link objects.
Fixes#56280.
Change-Id: I3336786bee01616ee9f2b18908738e4ca41c8102
Reviewed-on: https://go-review.googlesource.com/c/go/+/443535
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
ISEL is roughly equivalent to CMOV on PPC64. Verify ISEL generation
in all reasonable cases.
Note "ISEL test x y z" is the same as "ISEL !test y x z". test is
always one of LT (0), GT (1), EQ (2), SO (3). Sometimes x and y are
swapped if GE/LE/NE is desired.
Change-Id: Ie1bf029224064e004d855099731fe5e8d05aa990
Reviewed-on: https://go-review.googlesource.com/c/go/+/445215
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Prior to Go 1.18, ineffectual //go:linkname directives (i.e.,
directives referring to an undeclared name, or to a declared type or
constant) were treated as noops. In Go 1.18, we changed this into a
compiler error to mitigate accidental misuse.
However, the x/sys repo contained ineffectual //go:linkname directives
up until go.dev/cl/274573, which has caused a lot of user confusion.
It seems a bit late to worry about now, but to at least prevent
further user pain, this CL changes the error message to only apply to
modules using "go 1.18" or newer. (The x/sys repo declared "go 1.12"
at the time go.dev/cl/274573 was submitted.)
Fixes#55889.
Change-Id: Id762fff96fd13ba0f1e696929a9e276dfcba2620
Reviewed-on: https://go-review.googlesource.com/c/go/+/447755
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
This needs to be as low as possible while not breaking priority
assumptions of other scores to correctly schedule carry chains.
Prior to the arm64 changes, it was set below ReadTuple. At the time,
this prevented the MulHiLo implementation on PPC64 from occluding
the scheduling of a full carry chain.
Memory scores can also prevent better scheduling, as can be observed
with crypto/internal/edwards25519/field.feMulGeneric.
Fixes#56497
Change-Id: Ia4b54e6dffcce584faf46b1b8d7cea18a3913887
Reviewed-on: https://go-review.googlesource.com/c/go/+/447435
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The go1 benchmark suite does a lot of work at package init time, which
makes it take quite a while to run even if you're not running any of
the benchmarks, or if you're only running a subset of them. This leads
to an awkward workaround in dist test to compile but not run the
package, unlike roughly all other packages. It also reduces isolation
between benchmarks by affecting the starting heap size of all
benchmarks.
Fix this by initializing all data required by a benchmark when that
benchmark runs, and keeping it local so it gets freed by the GC and
doesn't leak between benchmarks. Now, none of the benchmarks depend on
global state.
Re-initializing the data on each benchmark run does add overhead to an
actual benchmark run, as each benchmark function is called several
times with different values of b.N. A full run of all benchmarks at
the default -benchtime=1s now takes ~10% longer; higher -benchtimes
would be less. It would be quite difficult to cache this data between
invocations of the same benchmark function without leaking between
different benchmarks and affecting GC overheads, as the testing
package doesn't provide any mechanism for this.
This reduces the time to run the binary with no benchmarks from 1.5
seconds to 10 ms, and also reduces the memory required to do this from
342 MiB to 17 MiB.
To make sure data was not leaking between different benchmarks, I ran
the benchmarks with -shuffle=on. The variance remained low: mostly
under 3%. A few benchmarks had higher variance, but in all cases it
was similar to the variance between this change.
This CL naturally changes the measured performance of several of the
benchmarks because it dramatically changes the heap size and hence GC
overheads. However, going forward the benchmarks should be much better
isolated.
For #37486.
Change-Id: I252ebea703a9560706cc1990dc5ad22d1927c7a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/443336
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Austin Clements <austin@google.com>
The recently added rule only works before decomposing slices.
Add a rule that works after decomposing slices.
The reason we need the latter is because although the length may
be a constant, it can be hidden inside a slice that is not constant
(its pointer or capacity might be changing). By applying this
optimization after decomposing slices, we can find more cases
where it applies.
Fixes#56440
Change-Id: I0094e59eee3065ab4d210defdda8227a6e897420
Reviewed-on: https://go-review.googlesource.com/c/go/+/446277
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Fixes a performance regression due to CL 418554.
Fixes#56440
Change-Id: I6ff152e9b83084756363f49ee6b0844a7a284880
Reviewed-on: https://go-review.googlesource.com/c/go/+/445875
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Error messages currently print floats with %.6g, which means that if
you tried to convert something close to, but not quite, an integer, to
an integer, the error you get looks like "cannot convert 1 to type
int", when really you want "cannot convert 0.9999999 to type int".
Add more digits to floats when printing them, to make it clear that they
aren't quite integers. This helps for errors which are the result of not
being an integer. For other errors, it won't hurt much.
Fixes#56220
Change-Id: I7f5873af5993114a61460ef399d15316925a15a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/442935
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Replace all uses of Ctz64/32/8 with TrailingZeros64/32/8, because they
are the same and maybe duplicated. Also renamed CtzXX functions in 386
assembly code.
Change-Id: I19290204858083750f4be589bb0923393950ae6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/438935
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Using importcfg instead of depending on the existence of .a files for
standard library packages will enable us to remove the .a files in a
future cl.
Change-Id: I6108384224508bc37d82fd990fc4a8649222502c
Reviewed-on: https://go-review.googlesource.com/c/go/+/440222
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
fakePC uses hash.Sum32, which returns an uint32. However, libfuzzer
trace/hook functions declare fakePC argument as int, causing overflow on
386 archs.
Fixing this by changing fakePC argument to uint to prevent the overflow.
Fixes#56141
Change-Id: I3994c461319983ab70065f90bf61539a363e0a2a
Reviewed-on: https://go-review.googlesource.com/c/go/+/441996
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For #56109
Change-Id: I999763e463fac57732a92f5e396f8fa8c35bd2e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/440297
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
CL 403995 fixed static init of literal contains dynamic exprs, by
ensuring their init are ordered properly. However, we still need to walk
the generated init codes before appending to parent init. Otherwise,
codes that requires desugaring will be unhandled, causing the compiler
backend crashing.
Fixes#56105
Change-Id: Ic25fd4017473f5412c8e960a91467797a234edfd
Reviewed-on: https://go-review.googlesource.com/c/go/+/440455
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
For example:
movb a0, a0
srai $1, a0, a0
the assembler will expand to:
slli $56, a0, a0
srai $56, a0, a0
srai $1, a0, a0
this CL optimize to:
slli $56, a0, a0
srai $57, a0, a0
Remove 270+ instructions from Go binary on linux/riscv64.
Change-Id: I375e19f9d3bd54f2781791d8cbe5970191297dc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/428496
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This is the last failed test in Unified IR, since it can inline f5 and
f6 but the old frontend can not. So marking them as //go:noinline, with
a TODO for re-enable once GOEXPERIMENT=nounified is gone.
Fixes#53058
Change-Id: Ifbbc49c87997a53e1b323048f0067f0257655fad
Reviewed-on: https://go-review.googlesource.com/c/go/+/437217
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The mismatch between Unified IR and the old frontend is not about how
they number the closures, but how they name them. For nested closure,
the old frontend use the immediate function which contains the closure
as the outer function, while Unified IR uses the outer most function as
the outer for all closures.
That said, what important is matching the number of closures, not their
name prefix. So this CL relax the test to match both "main.func1.func2"
and "main.func1.2" to satisfy both Unified IR and the old frontend.
Updates #53058
Change-Id: I66ed816d1968aa68dd3089a4ea5850ba30afd75b
Reviewed-on: https://go-review.googlesource.com/c/go/+/437216
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The linker needs FuncInfo metadata for all inlined functions. This is
typically handled by gc.enqueueFunc calling ir.InitLSym for all function
declarations in typecheck.Target.Decls (ir.UseClosure adds all closures
to Decls).
However, non-trivial closures in Decls are ignored, and are insteaded
enqueued when walk of the calling function discovers them.
This presents a problem for direct calls to closures. Inlining will
replace the entire closure definition with its body, which hides the
closure from walk and thus suppresses symbol creation.
Explicitly create a symbol early in this edge case to ensure we keep
this metadata.
InitLSym needs to move out of ssagen to avoid a circular dependency (it
doesn't have anything to do with ssa anyway). There isn't a great place
for it, so I placed it in ir, which seemed least objectionable.
The added test triggers one of these inlined direct non-trivial closure
calls, though the test needs CL 429637 to fail, which adds a FuncInfo
assertion to the linker. Note that the test must use "run" instead of
"compile" since the assertion is in the linker, and "compiler" doesn't
run the linker.
Fixes#54959.
Change-Id: I0bd1db4f3539a78da260934cd968372b7aa92546
Reviewed-on: https://go-review.googlesource.com/c/go/+/436240
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
If a cycle has length 1, don't enumerate the single cycle entry;
instead just mention "refers to itself". For instance, for an
invalid recursive type T we now report:
invalid recursive type: T refers to itself
instead of:
invalid recursive type T
T refers to
T
Adjust tests to check for the different error messages.
Change-Id: I5bd46f62fac0cf167f0d0c9a55f952981d294ff4
Reviewed-on: https://go-review.googlesource.com/c/go/+/436295
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
This matches what go/types and types2 report and it also matches
the compiler errors reported for some related shift problems.
For #55326.
Change-Id: Iee40e8d988d5a7f9ff2c49f019884d02485c9fdf
Reviewed-on: https://go-review.googlesource.com/c/go/+/436177
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This is close to what the compiler used to say, except now we say
"as T value" rather than "as type T" which is closer to the truth
(we cannot use a value as a type, after all). Also, place the primary
error and the explanation (cause) on a single line.
Make respective (single line) adjustment to the matching "cannot
convert" error.
Adjust various tests.
For #55326.
Change-Id: Ib646cf906b11f4129b7ed0c38cf16471f9266b88
Reviewed-on: https://go-review.googlesource.com/c/go/+/436176
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Compromise between old compiler error "T.m redeclared in this block"
(where the "in this block" is not particularly helpful) and the old
type-checker error "method m already declared for type T ...".
In the case where we have position information for the original
declaration, the error message is "method T.m already declared at
<position>". The new message is both shorter and more precise.
For #55326.
Change-Id: Id4a7f326fe631b11db9e8030eccb417c72d6c7db
Reviewed-on: https://go-review.googlesource.com/c/go/+/435016
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This is a compromise of the error reported by the compiler (quotes
around field name removed) and the error reported by the type checkers
(added mention of struct type).
For #55326.
Change-Id: Iac4fb5c717f17c6713e90d327d39e68d3be40074
Reviewed-on: https://go-review.googlesource.com/c/go/+/434815
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
This matches longstanding compiler behavior.
Also, for unused packages, report:
`"pkg" imported and not used`
`"pkg" imported as X and not used`
This matches the other `X declared and not used` errors.
For #55326.
Change-Id: Ie71cf662fb5f4648449c64fc51bede298a1bdcbf
Reviewed-on: https://go-review.googlesource.com/c/go/+/432557
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
