1. On entry to a function, only zero the ambiguously live stack variables.
Before, we were zeroing all stack variables containing pointers.
The zeroing is pretty inefficient right now (issue 7624), but there are also
too many stack variables detected as ambiguously live (issue 7345),
and that must be addressed before deciding how to improve the zeroing code.
(Changes in 5g/ggen.c, 6g/ggen.c, 8g/ggen.c, gc/pgen.c)
Fixes#7647.
2. Make the regopt word-based liveness analysis preserve the
whole-variable liveness property expected by the garbage collection
bitmap liveness analysis. That is, if the regopt liveness decides that
one word in a struct needs to be preserved, make sure it preserves
the entire struct. This is particularly important for multiword values
such as strings, slices, and interfaces, in which all the words need
to be present in order to understand the meaning.
(Changes in 5g/reg.c, 6g/reg.c, 8g/reg.c.)
Fixes#7591.
3. Make the regopt word-based liveness analysis treat a variable
as having its address taken - which makes it preserved across
all future calls - whenever n->addrtaken is set, for consistency
with the gc bitmap liveness analysis, even if there is no machine
instruction actually taking the address. In this case n->addrtaken
is incorrect (a nicer way to put it is overconservative), and ideally
there would be no such cases, but they can happen and the two
analyses need to agree.
(Changes in 5g/reg.c, 6g/reg.c, 8g/reg.c; test in bug484.go.)
Fixes crashes found by turning off "zero everything" in step 1.
4. Remove spurious VARDEF annotations. As the comment in
gc/pgen.c explains, the VARDEF must immediately precede
the initialization. It cannot be too early, and it cannot be too late.
In particular, if a function call sits between the VARDEF and the
actual machine instructions doing the initialization, the variable
will be treated as live during that function call even though it is
uninitialized, leading to problems.
(Changes in gc/gen.c; test in live.go.)
Fixes crashes found by turning off "zero everything" in step 1.
5. Do not treat loading the address of a wide value as a signal
that the value must be initialized. Instead depend on the existence
of a VARDEF or the first actual read/write of a word in the value.
If the load is in order to pass the address to a function that does
the actual initialization, treating the load as an implicit VARDEF
causes the same problems as described in step 4.
The alternative is to arrange to zero every such value before
passing it to the real initialization function, but this is a much
easier and more efficient change.
(Changes in gc/plive.c.)
Fixes crashes found by turning off "zero everything" in step 1.
6. Treat wide input parameters with their address taken as
initialized on entry to the function. Otherwise they look
"ambiguously live" and we will try to emit code to zero them.
(Changes in gc/plive.c.)
Fixes crashes found by turning off "zero everything" in step 1.
7. An array of length 0 has no pointers, even if the element type does.
Without this change, the zeroing code complains when asked to
clear a 0-length array.
(Changes in gc/reflect.c.)
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/80160044
Revision 3ae4607a43ff introduced CONVNOP layers
to fix type checking issues arising from comparisons.
The added complexity made 8g run out of registers
when compiling an equality function in go.net/ipv6.
A similar issue occurred in test/sizeof.go on
amd64p32 with 6g.
Fixes#7405.
LGTM=khr
R=rsc, dave, iant, khr
CC=golang-codereviews
https://golang.org/cl/78100044
A too large float constant is an error.
A too small float constant is rounded to zero.
Fixes#7419
Update #6902
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/76730046
The lowering to runtime calls introduces hidden pointers to the
arguments of select clauses. When implicit conversions were
involved it could end up with incompatible pointers. Since the
pointed-to types have the same representation, we can introduce a
forced conversion.
Fixes#6847.
LGTM=rsc
R=rsc, iant, khr
CC=golang-codereviews
https://golang.org/cl/72380043
The byte that r is or'd into is already 0x7, so the failure to zero r only
impacts the generated machine code if the register is > 7.
Fixes#7044.
LGTM=dave, minux.ma, rsc
R=dave, minux.ma, bradfitz, rsc
CC=golang-codereviews
https://golang.org/cl/73730043
Revision c0e0467635ec (cmd/gc: return canonical Node* from temp)
exposed original nodes of temporaries, allowing callers to mutate
their types.
In walkcompare a temporary could be typed as ideal because of
this. Additionnally, assignment of a comparison result to
a custom boolean type was broken.
Fixes#7366.
LGTM=rsc
R=rsc, iant, khr
CC=golang-codereviews
https://golang.org/cl/66930044
The error message was previously off by one in all cases.
Fixes#7150.
LGTM=r
R=golang-codereviews, r
CC=golang-codereviews
https://golang.org/cl/65850043
Not recording the address being taken was causing
the liveness analysis not to preserve x in the absence
of direct references to x, which in turn was making the
net test fail with GOGC=0.
In addition to the test, this fixes a bug wherein
GOGC=0 go test -short net
crashed if liveness analysis was in use (like at tip, not like Go 1.2).
TBR=ken2
CC=golang-codereviews
https://golang.org/cl/64470043
The existing tests issue4463.go and issue4654.go had failures at
typechecking and did not test walking the AST.
Fixes#7272.
LGTM=khr
R=khr, rsc, iant
CC=golang-codereviews
https://golang.org/cl/60550044
For historical reasons, temp was returning a copy
of the created Node*, not the original Node*.
This meant that if analysis recorded information in the
returned node (for example, n->addrtaken = 1), the
analysis would not show up on the original Node*, the
one kept in fn->dcl and consulted during liveness
bitmap creation.
Correct this, and watch for it when setting addrtaken.
Fixes#7083.
R=khr, dave, minux.ma
CC=golang-codereviews
https://golang.org/cl/51010045
Nodes of goto statements were corrupted when written
to export data.
Fixes#7023.
R=rsc, dave, minux.ma
CC=golang-codereviews
https://golang.org/cl/46190043
Gccgo doesn't have the same equivalent of file name and
package as the gc compiler, so the error messages are
necessarily different.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/40510048
fixedbugs/issue4510.dir/f2.go:7: error: 'fmt' defined as both imported name and global name
f1.go:7: note: 'fmt' imported here
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/41530044
const1.go:33: error: integer constant overflow
<similar errors omitted>
const1.go:64: error: division by zero
const1.go:67: error: floating point constant overflow
const1.go:68: error: floating point constant overflow
const1.go:69: error: floating point constant overflow
const1.go:70: error: division by zero
const1.go:71: error: expected integer type
const1.go:77: error: argument 1 has incompatible type (cannot use type int8 as type int)
const1.go:78: error: argument 1 has incompatible type (cannot use type int8 as type int)
const1.go:79: error: argument 1 has incompatible type (cannot use type uint8 as type int)
const1.go:81: error: argument 1 has incompatible type (cannot use type float32 as type int)
const1.go:82: error: argument 1 has incompatible type (cannot use type float64 as type int)
const1.go:83: error: floating point constant truncated to integer
const1.go:85: error: argument 1 has incompatible type (cannot use type float64 as type int)
const1.go:86: error: argument 1 has incompatible type (cannot use type string as type int)
const1.go:87: error: argument 1 has incompatible type (cannot use type bool as type int)
const1.go:90: error: const initializer cannot be nil
const1.go:91: error: expression is not constant
const1.go:92: error: expression is not constant
const1.go:93: error: invalid constant type
const1.go:94: error: invalid constant type
fixedbugs/bug462.go:17: error: unknown field 'os.File' in 'T'
fixedbugs/issue3705.go:9: error: cannot declare init - must be func
fixedbugs/issue4251.go:12: error: inverted slice range
fixedbugs/issue4251.go:16: error: inverted slice range
fixedbugs/issue4251.go:20: error: inverted slice range
fixedbugs/issue4405.go:11: error: invalid character 0x7 in identifier
fixedbugs/issue4405.go:12: error: invalid character 0x8 in identifier
fixedbugs/issue4405.go:13: error: invalid character 0xb in identifier
fixedbugs/issue4405.go:14: error: invalid character 0xc in identifier
fixedbugs/issue4429.go:15: error: expected pointer
fixedbugs/issue4517d.go:9: error: cannot import package as init
fixedbugs/issue4545.go:17: error: invalid context-determined non-integer type for left operand of shift
fixedbugs/issue4545.go:16: error: incompatible types in binary expression
fixedbugs/issue4610.go:15: error: expected ';' or '}' or newline
fixedbugs/issue4610.go:16: error: expected declaration
fixedbugs/issue4654.go:15: error: value computed is not used
<similar errors omitted>
fixedbugs/issue4776.go:9: error: program must start with package clause
fixedbugs/issue4776.go:9: error: expected ';' or newline after package clause
fixedbugs/issue4813.go:31: error: index must be integer
<similar errors omitted>
fixedbugs/issue4847.go:22: error: initialization expression for 'matchAny' depends upon itself
fixedbugs/issue5089.go:13: error: redefinition of 'bufio.Buffered': receiver name changed
fixedbugs/issue5089.go:11: note: previous definition of 'bufio.Buffered' was here
fixedbugs/issue5172.go:17: error: reference to undefined field or method 'bar'
fixedbugs/issue5172.go:18: error: reference to undefined field or method 'bar'
fixedbugs/issue5172.go:12: error: use of undefined type 'bar'
fixedbugs/issue5358.go:16: error: argument 2 has incompatible type
fixedbugs/issue5581.go:29: error: use of undefined type 'Blah'
funcdup.go:10: error: redefinition of 'i'
funcdup.go:10: note: previous definition of 'i' was here
<similar errors omitted>
funcdup2.go:10: error: redefinition of 'i'
funcdup2.go:10: note: previous definition of 'i' was here
<similar errors omitted>
slice3err.go:20: error: middle index required in 3-index slice
<similar errors omitted>
slice3err.go:20: error: final index required in 3-index slice
<similar errors omitted>
slice3err.go:21: error: final index required in 3-index slice
slice3err.go:46: error: invalid 3-index slice of string
<similar errors omitted>
slice3err.go:57: error: inverted slice range
<similar errors omitted>
slice3err.go:62: error: invalid slice index: capacity less than length
slice3err.go:64: error: invalid slice index: capacity less than start
slice3err.go:65: error: invalid slice index: capacity less than start
slice3err.go:66: error: invalid slice index: capacity less than start
slice3err.go:68: error: invalid slice index: capacity less than length
slice3err.go:70: error: invalid slice index: capacity less than start
slice3err.go:80: error: invalid slice index: capacity less than length
slice3err.go:82: error: invalid slice index: capacity less than start
slice3err.go:83: error: invalid slice index: capacity less than start
slice3err.go:84: error: invalid slice index: capacity less than start
slice3err.go:86: error: invalid slice index: capacity less than length
slice3err.go:88: error: invalid slice index: capacity less than start
slice3err.go:99: error: array index out of bounds
<similar errors omitted>
slice3err.go:106: error: invalid slice index: capacity less than length
slice3err.go:107: error: invalid slice index: capacity less than start
slice3err.go:118: error: invalid slice index: capacity less than length
slice3err.go:119: error: invalid slice index: capacity less than start
syntax/semi1.go:10: error: missing '{' after if clause
syntax/semi1.go:10: error: reference to undefined name 'x'
syntax/semi1.go:10: error: reference to undefined name 'y'
syntax/semi1.go:12: error: reference to undefined name 'z'
syntax/semi2.go:10: error: missing '{' after switch clause
syntax/semi2.go:10: error: reference to undefined name 'x'
syntax/semi3.go:10: error: missing '{' after for clause
syntax/semi3.go:10: error: reference to undefined name 'x'
syntax/semi3.go:10: error: reference to undefined name 'y'
syntax/semi3.go:10: error: reference to undefined name 'z'
syntax/semi3.go:12: error: reference to undefined name 'z'
syntax/semi4.go:11: error: missing '{' after for clause
syntax/semi4.go:10: error: reference to undefined name 'x'
syntax/semi4.go:12: error: reference to undefined name 'z'
typecheck.go:12: error: reference to undefined name 'b'
typecheck.go:17: error: reference to undefined name 'c'
typecheck.go:11: error: use of undefined type 'b'
typecheck.go:16: error: not enough arguments
typecheck.go:17: error: not enough arguments
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/41520044
There is no necessary relationship between the imports of the
packages a and b, and gccgo happens to import them in a
different order, leading to different output. This ordering
is not the purpose of the test in any case.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/40400043
Types in function scope can have methods on them if they embed another type, but we didn't make the name unique, meaning that 2 identically named types in different functions would conflict with eachother.
Fixes#6269.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13326045
The compiler computes initialization order by finding
a spanning tree between a package's global variables.
But it does so by walking both variables and functions
and stops detecting cycles between variables when they
mix with a cycle of mutually recursive functions.
Fixes#4847.
R=golang-dev, daniel.morsing, rsc
CC=golang-dev
https://golang.org/cl/9663047
Individual variables bigger than 10 MB are now
moved to the heap, as if they had escaped on
their own.
This avoids ridiculous stacks for programs that
do things like
x := [1<<30]byte{}
... use x ...
If 10 MB is too small, we can raise the limit.
Fixes#6077.
R=ken2
CC=golang-dev
https://golang.org/cl/12650045
Backends do not exactly expect receiving binary operators with
constant operands or use workarounds to move them to
register/stack in order to handle them.
Fixes#5841.
R=golang-dev, daniel.morsing, rsc
CC=golang-dev
https://golang.org/cl/11107044
clearfat (used to zero initialize structures) will use AX for x86 block ops. If we write to AX while calculating the dest pointer, we will fill the structure with incorrect values.
Since 64-bit arithmetic uses AX to synthesize a 64-bit register, getting an adress by indexing with 64-bit ops can clobber the register.
Fixes#5820.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/11383043
Deferred functions are not run by a call instruction. They are run by
the runtime editing registers to make the call start with a caller PC
returning to a
CALL deferreturn
instruction.
That instruction has always had the line number of the function's
closing brace, but that instruction's line number is irrelevant.
Stack traces show the line number of the instruction before the
return PC, because normally that's what started the call. Not so here.
The instruction before the CALL deferreturn could be almost anywhere
in the function; it's unrelated and its line number is incorrect to show.
Fix the line number by inserting a true hardware no-op with the right
line number before the returned-to CALL instruction. That is, the deferred
calls now appear to start with a caller PC returning to the second instruction
in this sequence:
NOP
CALL deferreturn
The traceback will show the line number of the NOP, which we've set
to be the line number of the function's closing brace.
The NOP here is not the usual pseudo-instruction, which would be
elided by the linker. Instead it is the real hardware instruction:
XCHG AX, AX on 386 and amd64, and AND.EQ R0, R0, R0 on ARM.
Fixes#5856.
R=ken2, ken
CC=golang-dev
https://golang.org/cl/11223043
Escape analysis needs the right curfn value on a dclfunc node, otherwise it will not analyze the function.
When generating method value wrappers, we forgot to set the curfn correctly.
Fixes#5753.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/10383048
A struct with a single field was considered as equivalent to the
field type, which is incorrect is the field is blank.
Fields with padding could make the compiler think some
types are comparable when they are not.
Fixes#5698.
R=rsc, golang-dev, daniel.morsing, bradfitz, gri, r
CC=golang-dev
https://golang.org/cl/10271046
Design doc at golang.org/s/go12slice.
This is an experimental feature and may not be included in the release.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/10743046
Exported inlined functions that perform a string conversion
using a non-exported named type may miss it in export data.
Fixes#5755.
R=rsc, golang-dev, ality, r
CC=golang-dev
https://golang.org/cl/10464043
The existing compilers convert empty strings to empty
but non-nil byte and rune slices. The spec required
a nil byte and rune slice in those cases. That seems
an odd additional requirement. Adjust the spec to
match the reality.
Also, removed over-specification for conversions of
nil []byte and []rune: such nil slices already act
like empty slices and thus don't need extra language.
Added extra examples instead.
Fixes#5704.
R=rsc, r, iant
CC=golang-dev
https://golang.org/cl/10440045
This avoids problems with inlining in genwrappers, which
occurs after functions have been compiled. Compiling a
function may cause some unused local vars to be removed from
the list. Since a local var may be unused due to
optimization, it is possible that a removed local var winds up
beingused in the inlined version, in which case hilarity
ensues.
Fixes#5515.
R=golang-dev, khr, dave
CC=golang-dev
https://golang.org/cl/10210043