The problem in 51355 is that escape analysis decided that the
dictionary variable was captured by reference instead of by value. We
want dictionaries to always be captured by value.
Escape analysis was confused because it saw what it thought was a
reassignment of the dictionary variable. In fact, it was the only
assignment, it just wasn't marked as the defining assignment. Fix
that.
Add an assert to make sure this stays true.
Fixes#51355
Change-Id: Ifd9342455fa107b113f5ff521a94cdbf1b8a7733
Reviewed-on: https://go-review.googlesource.com/c/go/+/388115
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In case of a selector expression x.sel where x is a built-in
we didn't report an error because the type of built-ins is
invalid and we surpress errors on operands of invalid types,
assuming that an error has been reported before.
Add a corresponding check for this case.
Review all places where we call Checker.exprOrType to ensure
(invalid) built-ins are reported.
Adjusted position for index error in types2.
Fixes#51360.
Change-Id: I24693819c729994ab79d31de8fa7bd370b3e8469
Reviewed-on: https://go-review.googlesource.com/c/go/+/388054
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In the dev.typeparams branch, the documentation for Type.Underlying was
updated with commentary about forwarding chains. This aspect of
Underlying should not be exposed to the user. Revert to the
documentation of Go 1.16.
Fixes#51036
Change-Id: I4b73d3908a88606314aab56540cca91c014dc426
Reviewed-on: https://go-review.googlesource.com/c/go/+/388036
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
64-bit atomic functions on ARM have the following structure:
- check if the address is 64-bit aligned, if not, prepare a frame
and call panicUnaligned
- tail call armXXX or goXXX depending on GOARM
The alignment check calls panicUnaligned after preparing a frame,
so the stack can be unwound. The call never returns, so the SP is
not set back. However, the assembler assigns SP delta following
the instruction stream order, not the control flow. So it leaves
a nonzero SP delta after the check, to the tail call instructions,
which is wrong because when they are executed the SP is not
decremented. This CL fixes this by adding the SP back (the
instruction never executes, just tells the assembler to set the
SP delta back).
Should fix#51353.
Change-Id: I976cb1cfb0e9008b13538765cbc7eea0c19c7130
Reviewed-on: https://go-review.googlesource.com/c/go/+/388014
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Delay validation of receiver type as it may cause premature expansion
of types the receiver type is dependent on. This was actually a TODO.
While the diff looks large-ish, the actual change is small: all the
receiver validation code has been moved inside the delayed function
body, and a couple of comments have been adjusted.
Fixes#51232.
Fixes#51233.
Change-Id: I44edf0ba615996266791724b832d81b9ccb8b435
Reviewed-on: https://go-review.googlesource.com/c/go/+/387918
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For #45964
Change-Id: Ic66502c50ca328e944c91e710dca6c8dbc168e4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/387855
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Matt Layher <mdlayher@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Check receiver type parameter count when type checking the method
signature and report a suitable error (don't rely on delayed
instantiation and possibly constraint type inference).
While at it, simplify blank name recoding and type bound rewriting.
Stop-gap measure to avoid crashes in the compiler.
Fixes#51339.
For #51343.
Change-Id: Idbe2d32d69b66573ca973339f8924b349d2bc9cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/387836
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TypeParam.is also provides ~ (tilde) information which is needed
to fix#51229. Delete all code related to singleType as it's not
used anymore.
Also, remove TypeParam.hasTerms as it was not used.
For #51229.
Change-Id: Ie49b19d157230beecb17a444d1f17cf24aa4f6ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/387774
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Previous versions of the 'go' command would reject a pseudo-version
passed to 'go get' if that pseudo-version had a mismatched major
version and lacked a "+incompatible" suffix. However, they would
erroneously accept a version *with* a "+incompatible" suffix even if
the repo contained a vN/go.mod file for the same major version, and
would generate a "+incompatible" pseudo-version or version if the user
requested a tag, branch, or commit hash.
This change uniformly rejects "vN.…" without "+incompatible", and also
avoids resolving to "vN.…+incompatible", when vN/go.mod exists.
To maintain compatibility with existing go.mod files, it still accepts
"vN.…+incompatible" if the version is requested explicitly as such
and the repo root lacks a go.mod file.
Fixes#51324
Updates #36438
Change-Id: I2b16150c73fc2abe4d0a1cd34cb1600635db7139
Reviewed-on: https://go-review.googlesource.com/c/go/+/387675
Trust: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
We changed to delaying all transforms of generic functions, since there
are so many complicated situations where type params can be used. We
missed changing so that all Call expressions(not just some) are delayed
if in a generic function. This changes to delaying all transforms on
calls in generic functions. Had to convert Call() to g.callExpr() (so we
can access g.delayTransform()). By always delaying transforms on calls
in generic functions, we actually simplify the code a bit both in
g.CallExpr() and stencil.go.
Fixes#51236
Change-Id: I0342c7995254082c4baf709b0b92a06ec14425e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/386220
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Use a cleanup method and simple registration mechanism
for types that need some final processing before the end
of type checking.
Use cleanup mechanism instead of expandDefTypes mechanism
for *Named types. There is no change in functionality here.
Use cleanup mechanism also for TypeParam and Interface types
to ensure that their check fields are nilled out at the end.
Introduce a simple constructor method for Interface types
to ensure that the cleanup method is always registered.
In go/types, add tracing code to Checker.checkFiles to match
types2.
Minor comment adjustments.
Fixes#51316.
Fixes#51326.
Change-Id: I7b2bd79cc419717982f3c918645af623c0e80d5e
Reviewed-on: https://go-review.googlesource.com/c/go/+/387417
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
A type implements a comparable interface only if the type
is statically known to be comparable. Specifically, a type
cannot contain (component) interfaces that are not statically
known to be comparable.
This CL adds a flag "dynamic" to the comparable predicate to
control whether interfaces are always (dynamically) comparable.
Set the flag to true when testing for (traditional) Go comparability;
set the flag to false when testing whether a type implements the
comparable interface.
Fixes#51257.
Change-Id: If22bc047ee59337deb2e7844b8f488d67e5c5530
Reviewed-on: https://go-review.googlesource.com/c/go/+/387055
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
CL 374294 made our check for incorrect type parameters constraints
eager, but failed to remove the construction of the bounds slice, which
was no longer used.
Change-Id: Ib8778fba947ef8a8414803e95d72c49b8f75c204
Reviewed-on: https://go-review.googlesource.com/c/go/+/386717
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
There is code in the wild that copies the Buffers slice,
but not the contents.
Let's document explicitly that it is not safe to do so.
Updates #45163
Change-Id: Id45e27b93037d4e9f2bfde2558e7869983b60bcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/387434
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
The tag was "go-mod-vendor", which doesn't match the content.
Also move that section later, so "go mod" sections stay together.
For #47694.
Change-Id: Id4fa7ee0768682a9aadfeb1b2f1d723e7521896b
Reviewed-on: https://go-review.googlesource.com/c/go/+/387354
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As documented in #51209, we have been seeing a low-rate failure
on macOS builders caused by spurious x509 “certificate is expired” errors.
The root cause is that CFDateCreate takes a float64, but it is being
passed a uintptr instead. That is, we're not even putting CFDateCreate's
argument in the right register during the call. Luckily, having just
computed the argument by calling time.Duration.Seconds, which
returns a float64, most of the time the argument we want is still
in the right floating point register, somewhat accidentally.
The only time the lucky accident doesn't happen is when the goroutine
is rescheduled between calling time.Duration.Seconds and calling
into CFDateCreate *and* the rescheduling smashes the floating point
register, which can happen during various block memory moves,
since the floating point registers are also the SIMD registers.
Passing the float64 through explicitly eliminates the problem.
It is difficult to write a test for this that is suitable for inclusion
in the standard library. We will have to rely on the builders to
start flaking again if somehow this problem is reintroduced.
For future reference, there is a standalone test that used to fail
every few seconds at https://go.dev/play/p/OWfDpxgnW9g.
Fixes#51209.
Change-Id: I8b334a51e41f406b13f37270e9175c64fe6f55ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/387255
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Updates #47694
Change-Id: I6c1c3698fdd55fe83c756f28776d1d26dba0a9df
Reviewed-on: https://go-review.googlesource.com/c/go/+/386974
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When encoding a xml attribute is zero value (IsValid == false), we need
a `continue` to jump over the attribute. If not, followed marshalAttr
function will panic.
Fixes: #50164
Change-Id: I42e064558e7becfbf47728b14cbf5c7afa1e8798
Reviewed-on: https://go-review.googlesource.com/c/go/+/385514
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: If3d5884d9f3f32606c510af5597529b832a8f4a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/386934
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
sed 's/the/that/g'
Change-Id: I3f539817b055d54b0ec99346555ac91b756d9ed6
GitHub-Last-Rev: 2e7df1c346
GitHub-Pull-Request: golang/go#51267
Reviewed-on: https://go-review.googlesource.com/c/go/+/386854
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Remove unnecessary whitespace in noescape comment
Fixes#50634
Change-Id: I1c8d16c020b05678577d349470fac7e7ab8a10b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/378815
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
They are called from compiler instrumented code as ABIInternal.
Define them as ABIInternal to avoid the wrappers and save some
stack space, to avoid nosplit overflow in -race -N -l build.
For #51247.
Change-Id: Iadad7d6da8ac03780a7b02b03b004c52d34e020a
Reviewed-on: https://go-review.googlesource.com/c/go/+/386715
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Save some stack space, to avoid nosplit overflow in
-race -N -l build.
For #51247.
Change-Id: I7357d6227f816a612a64f55f7ca1b1384e9268e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/386714
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The code for issue #51219 reveals bugs in the types1 and types2
importers that can occur for recursive types that are recursive through
the type constraint.
The crash in the issue is caused by the types1 bug, which leads to the
production of a type1 type which is incomplete and improperly has the
HasTParam flag set. The bug in the types1 importer is that we were not
deferring type instantiations when reading the type parameters, but we
need to do that exactly to correctly handle recursion through the type
constraint. So, the fix is to move the start of the deferrals (in the
'U' section of doDecl in typecheck/iimport.go) above the code that reads
the type params.
Once that bug is fixed, the test still crashes due to a related types2
importer issues. The problem is that t.SetConstraint(c) requires c to be
fully constructed (have its underlying type set). Since that may not be
done yet in the 'U' case in (*importReader).obj() in
importer/iimport.go, we need to defer the call to SetConstraint() in
that case, until we are done importing all the types.
I added a test case with recursion through a type constraint that causes
a problem that is fixed by the types1 importer change, though the error
is not the same as in the issue. I added more types in the test case
(which try to imitate the issue types more closely) the types2 bug, but
wasn't able to cause it yet with the smaller test case.
Fixes#51219
Change-Id: I85d860c98c09dddc37f76ce87a78a6015ec6fd20
Reviewed-on: https://go-review.googlesource.com/c/go/+/386335
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The test spawned a subprocess that arbitrarily slept for one second.
However, on some platforms, longer than one second may elapse between
starting the subprocess and sending the termination signal.
Instead, the subprocess now closes stdout and reads stdin until EOF,
eliminating the need for an arbitrary duration. (If the parent test
times out, the stdin pipe will break, so the subprocess still won't
leak forever.)
This also makes the test much faster in the typical case: since it
uses synchronization instead of sleeping, it can run as quickly as the
host OS can start and kill the process.
Fixes#44131
Change-Id: I9753571438380dc14fc3531efdaea84578a47fae
Reviewed-on: https://go-review.googlesource.com/c/go/+/386174
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Prior to CL 339170, relative errors in module mode resulted in a
base.Fatalf from the module loader, which caused unrecoverable errors
from 'go list -e' but successfully rejected relative imports (which
were never intended to work in module mode in the first place).
After that CL, the base.Fatalf is no longer present, but some errors
that had triggered that base.Fatalf were no longer diagnosed at all:
the module loader left them for the package loader to report, and the
package loader assumed that the module loader would report them.
Since the module loader already knows that the paths are invalid,
it now reports those errors itself.
Fixes#51125
Change-Id: I70e5818cfcfeea0ac70e17274427b08a74fd7c13
Reviewed-on: https://go-review.googlesource.com/c/go/+/386176
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Replace the WAIT query prefix with a function callback.
This fixes timing issues when the testing on loaded servers.
Fixes#51208
Change-Id: I5151b397b7066c27ce6bc02c160dde0b584934bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/385934
Run-TryBot: Daniel Theophanes <kardianos@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Trust: Daniel Theophanes <kardianos@gmail.com>
Otherwise, the behavior of a fuzz target that returns an error could
be confusing.
Fuzz is already documented to require a function “with no return
value”, so this fixes the implementation to match the existing
documentation.
Fixes#51222
Change-Id: I44ca7ee10960214c92f5ac066ac8484c8bb9cd6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/386175
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Nooras Saba <saba@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This change removes the -workfile flag and allows the go.work file path
to be set using GOWORK (which was previously read-only). This removes
the potential discrepancy and confusion between the flag and environment
variable.
GOWORK will still return the actual path of the go.work file found if it
is set to '' or 'auto'. GOWORK will return 'off' if it is set to 'off'.
For #45713Fixes#51171
Change-Id: I72eed65d47c63c81433f2b54158d514daeaa1ab3
Reviewed-on: https://go-review.googlesource.com/c/go/+/385995
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
For #48685Fixes#50806
Change-Id: Ie8be40e5794c0998538890a651ef8ec92cb72d3a
Reviewed-on: https://go-review.googlesource.com/c/go/+/381155
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Paul Jolly <paul@myitcv.org.uk>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The existing value of 512 bytes as is specified by RFC 1035.
However, the WSL resolver reportedly sends larger packets without
setting the truncation bit, which breaks using the Go resolver.
For 1.18 and backports, just increase the accepted packet size.
This is what GNU glibc does (they use 65536 bytes).
For 1.19 we plan to use EDNS to set the accepted packet size.
That will give us more time to test whether that causes any problems.
No test because I'm not sure how to write one and it wouldn't really
be useful anyhow.
Fixes#6464Fixes#21160Fixes#44135Fixes#51127
For #51153
Change-Id: I0243f274a06e010ebb714e138a65386086aecf17
Reviewed-on: https://go-review.googlesource.com/c/go/+/386015
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts https://go.dev/cl/385035. For 1.18 we will use a simple
change to increase the accepted DNS packet size, to handle what appear
to be broken resolvers that don't honor the 512 byte limit. For 1.19
we will restore CL 385035 to make a proper EDNS request, so that it
has more testing time before it goes out in a release.
For #6464
For #21160
For #44135
For #51127
For #51153
Change-Id: Ie4a0eb85ca0a6a73bee5cd4cfc6b7d2a15ef259f
Reviewed-on: https://go-review.googlesource.com/c/go/+/386014
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
The go modules download command has a method called hashZip which checks the
hash of a zipped directory versus an expected value, and then writes it out
to a file. In the event that the write operation is not successful, we do
not close the file, leading to it being leaked. This could happen if the
user runs out of disk space, causing the underlying OS write command to
return an error. Ultimately, this led to a panic in lockfile.OpenFile which
was invoked from a finalizer garbage collecting the leaked file. The result
was a stack trace that didn't show the call stack from where the write
operation actually failed.
Fixes#50858
Change-Id: I4a24d2ab13dc903d623bbf8252b37bb9d724b8de
GitHub-Last-Rev: 354ef1d29e
GitHub-Pull-Request: golang/go#51058
Reviewed-on: https://go-review.googlesource.com/c/go/+/383915
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 383434 forgot to enable these paths for android, which is still linux
just not via GOOS.
Fixes#51213.
Change-Id: I102e53e8671403ded6edb4ba04789154d7a0730b
Reviewed-on: https://go-review.googlesource.com/c/go/+/385954
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In issue 50113, we see that a thread blocked in a system call can result
in a hang of AllThreadsSyscall. To resolve this, we must send a signal
to these threads to knock them out of the system call long enough to run
the per-thread syscall.
Stepping back, if we need to send signals anyway, it should be possible
to implement this entire mechanism on top of signals. This CL does so,
vastly simplifying the mechanism, both as a direct result of
newly-unnecessary code as well as some ancillary simplifications to make
things simpler to follow.
Major changes:
* The rest of the mechanism is moved to os_linux.go, with fields in mOS
instead of m itself.
* 'Fixup' fields and functions are renamed to 'perThreadSyscall' so they
are more precise about their purpose.
* Rather than getting passed a closure, doAllThreadsSyscall takes the
syscall number and arguments. This avoids a lot of hairy behavior:
* The closure may potentially only be live in fields in the M,
hidden from the GC. Not necessary with no closure.
* The need to loan out the race context. A direct RawSyscall6 call
does not require any race context.
* The closure previously conditionally panicked in strange
locations, like a signal handler. Now we simply throw.
* All manual fixup synchronization with mPark, sysmon, templateThread,
sigqueue, etc is gone. The core approach is much simpler:
doAllThreadsSyscall sends a signal to every thread in allm, which
executes the system call from the signal handler. We use (SIGRTMIN +
1), aka SIGSETXID, the same signal used by glibc for this purpose. As
such, we are careful to only handle this signal on non-cgo binaries.
Synchronization with thread creation is a key part of this CL. The
comment near the top of doAllThreadsSyscall describes the required
synchronization semantics and how they are achieved.
Note that current use of allocmLock protects the state mutations of allm
that are also protected by sched.lock. allocmLock is used instead of
sched.lock simply to avoid holding sched.lock for so long.
Fixes#50113
Change-Id: Ic7ea856dc66cf711731540a54996e08fc986ce84
Reviewed-on: https://go-review.googlesource.com/c/go/+/383434
Reviewed-by: Austin Clements <austin@google.com>
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add a generic syscall package for use by the runtime. Eventually we'd
like to clean up system calls in the runtime to use more code generation
and be moved out of the main runtime package.
The implementations of the assembly functions are based on copies of
syscall.RawSyscall6, modified slightly for more consistency between
arches. e.g., renamed trap to num, always set syscall num register
first.
For now, this package is just the bare minimum needed for
doAllThreadsSyscall to make an arbitrary syscall.
For #51087.
For #50113.
Change-Id: Ibecb5e6303279ce15286759e1cd6a2ddc52f7c72
Reviewed-on: https://go-review.googlesource.com/c/go/+/383999
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
syscall_runtime_doAllThreadsSyscall is only used on Linux. In
preparation of a follow-up CL that will modify the function to use other
Linux-only functions, move it to os_linux.go with no changes.
For #50113.
Change-Id: I348b6130038603aa0a917be1f1debbca5a5a073f
Reviewed-on: https://go-review.googlesource.com/c/go/+/383996
Trust: Michael Pratt <mpratt@google.com>
Reviewed-by: Andrew G. Morgan <agm@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add tests that verify consistent behavior of go/types and types2 with
respect to potentially ambiguous type parameter lists.
For #49482
Change-Id: I3386d4fa3eb91f2a8ea0987372ca40a6962de886
Reviewed-on: https://go-review.googlesource.com/c/go/+/385756
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is a port of CL 370774 to go/parser and go/printer. It is adjusted
for the slightly different factoring of parameter list parsing and
printing in go/parser and go/printer.
For #49482
Change-Id: I1c5b1facddbfcb7f7b2be356c817fc7e608223f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/385575
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When line number saturates, we can end up getting non-monotonic
position info, because the start of the next line after line=lineMax,col=2
is line=lineMax,col=1.
Instead, if line==lineMax, make the column always 0 (no column info).
If the line number is wrong, having column info probably isn't that helpful.
Fixes#51193
Change-Id: If3d90472691b1f6163654f3505e2cb98467f2383
Reviewed-on: https://go-review.googlesource.com/c/go/+/385795
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Pointer comparison is lowered to the following on RISCV64
(EqPtr x y) => (SEQZ (SUB <x.Type> x y))
The difference of two pointers (the SUB) should not be pointer
type. Otherwise it can cause the GC to find a bad pointer.
Should fix#51101.
Change-Id: I7e73c2155c36ff403c032981a9aa9cccbfdf0f64
Reviewed-on: https://go-review.googlesource.com/c/go/+/385655
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
