These are analogous to URL.RawPath and URL.EscapedPath
and allow users fine-grained control over how the fragment
section of the URL is escaped. Some tools care about / vs %2f,
same problem as in paths.
Fixes#37776.
Change-Id: Ie6f556d86bdff750c47fe65398cbafd834152b47
Reviewed-on: https://go-review.googlesource.com/c/go/+/227645
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
This is a roll forward of CL 224588 which was rolled back due to
test failures. In this version, the test is in the time package,
not the time/tzdata package. That lets us compare the zip file
to the time/tzdata package, ensuring that we are looking at similar
versions of tzdata information.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: I916d9d8473abe201b897cdc2bbd9168df4ad671c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228101
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This reverts CL 224588.
Reason for revert: Test failing on secondary platforms.
Change-Id: Ic15fdc73a0d2b860e776733abb82c58809e13160
Reviewed-on: https://go-review.googlesource.com/c/go/+/228200
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: Iffddee72a8f46c95fee3bcde43c142d6899d9246
Reviewed-on: https://go-review.googlesource.com/c/go/+/224588
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Adds an entry in the Go1.15 release notes, but also
adds an example test for URL.Redacted.
Follow-up of CL 207082.
Updates #37419
Change-Id: Ibf81989778907511a3a3a3e4a03d1802b5dd9762
Reviewed-on: https://go-review.googlesource.com/c/go/+/227997
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
flag treats -h or -help as a special case to print a nice help
message, but exit with a status code of 2. This update makes
that status code 0.
Fixes#37533
Change-Id: I7e0bd29944ce46607fb7cfc6740734f7444a151a
GitHub-Last-Rev: 83f64d757b
GitHub-Pull-Request: golang/go#37530
Reviewed-on: https://go-review.googlesource.com/c/go/+/221427
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: I35dd218823fe8cb9383e9ac7bbfec2cc8a358748
Reviewed-on: https://go-review.googlesource.com/c/go/+/226460
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This reverts CL 223257.
Reason for revert: broke TestScript/mod_gonoproxy on the longtest builders.
Change-Id: I8637c52c5a7d5333a37ed1e9998c49786525ecb1
Reviewed-on: https://go-review.googlesource.com/c/go/+/225757
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: If53152ec1c3282c67d4909818b666af58884fb2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/223257
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If TestMain reports a wrong exit code to os.Exit, the test will be
exited with exist code inconsist with test results.
This CL eliminates the requirement of calling os.Exit in TestMain.
Now, m.Run records the execution status of its test, the outer
main func will call os.Exit with that exit code if TestMain does
not call os.Exit.
If TestMain does not call m.Run, the outer main func remain calls
os.Exit(0) as before.
Fixes#34129
Change-Id: I9598023e03b0a6260f0217f34df41c231c7d6489
Reviewed-on: https://go-review.googlesource.com/c/go/+/219639
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make panics more useful by printing values, if their
underlying kind is printable, instead of just their memory address.
Thus now given any custom type derived from any of:
float*, int*, string, uint*
if we have panic with such a result, its value will be printed.
Thus given any of:
type MyComplex128 complex128
type MyFloat64 float64
type MyString string
type MyUintptr uintptr
panic(MyComplex128(32.1 + 10i))
panic(MyFloat64(-93.7))
panic(MyString("This one"))
panic(MyUintptr(93))
They will now print in the panic:
panic: main.MyComplex64(+1.100000e-001+3.000000e+000i)
panic: main.MyFloat64(-9.370000e+001)
panic: main.MyString("This one")
panic: main.MyUintptr(93)
instead of:
panic: (main.MyComplex128) (0xe0100,0x138cc0)
panic: (main.MyFloat64) (0xe0100,0x138068)
panic: (main.MyString) (0x48aa00,0x4c0840)
panic: (main.MyUintptr) (0xe0100,0x137e58)
and anything else will be printed as in the past with:
panic: (main.MyStruct) (0xe4ee0,0x40a0e0)
Also while here, updated the Go1.15 release notes.
Fixes#37531
Change-Id: Ia486424344a386014f2869ab3483e42a9ef48ac4
Reviewed-on: https://go-review.googlesource.com/c/go/+/221779
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This removes much of the complexity of the implementation and use of
the cmd/go/internal/cmdflag package, and makes the behavior of GOFLAGS
in 'go test' and 'go vet' more consistent with other subcommands.
Some of the complexity reduction has been offset by code comments and
bug fixes, particularly for the handling of GOPATH arguments and flag
terminators ('--').
Fixes#32471Fixes#18682
Change-Id: I1f6e46a7c679062e1e409e44a2b9f03b9172883b
Reviewed-on: https://go-review.googlesource.com/c/go/+/211358
Reviewed-by: Jay Conrod <jayconrod@google.com>
This CL implements Ticker.Reset method in time package.
Benchmark:
name time/op
TickerReset-12 6.41µs ±10%
TickerResetNaive-12 95.7µs ±12%
Fixes#33184
Change-Id: I4cbd31796efa012b2a297bb342158f11a4a31fef
Reviewed-on: https://go-review.googlesource.com/c/go/+/220424
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 217362 (6e5652bebede2d53484a872f6d1dfeb498b0b50c.)
Reason for revert: Causing failures on arm64 bots. See #33184 for more info
Change-Id: I72ba40047e4138767d95aaa68842893c3508c52f
Reviewed-on: https://go-review.googlesource.com/c/go/+/220638
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL implements Ticker.Reset method in time package.
Benchmark:
name time/op
TickerReset-12 6.41µs ±10%
TickerResetNaive-12 95.7µs ±12%
Fixes#33184
Change-Id: I12c651f81e452541bcbbc748b45f038aae1f8dae
Reviewed-on: https://go-review.googlesource.com/c/go/+/217362
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Copied from go1.14.html, with changes redacted back to TODOs following
the model of CL 195058.
'relnote -html' does not report any changes at this time.
Updates #33738
Change-Id: I580232805ab7db35935f3e1ba03b720be4796a7e
Reviewed-on: https://go-review.googlesource.com/c/go/+/220278
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
