When using gccgo it's OK if a pointer passed to C remains on the stack.
Gccgo does not have the clear distinction between C and Go stacks.
Change-Id: I3af9dd6fe078214ab16d9d8dad2d206608d7891d
Reviewed-on: https://go-review.googlesource.com/16774
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
This implements part of the proposal in issue 12416 by adding dynamic
checks for passing pointers from Go to C. This code is intended to be
on at all times. It does not try to catch every case. It does not
implement checks on calling Go functions from C.
The new cgo checks may be disabled using GODEBUG=cgocheck=0.
Update #12416.
Change-Id: I48de130e7e2e83fb99a1e176b2c856be38a4d3c8
Reviewed-on: https://go-review.googlesource.com/16003
Reviewed-by: Russ Cox <rsc@golang.org>
In keysFromMasterSecret(), don't copy from serverRandom into
seed[:len(clientRandom)]. Actually, switch from an array to a slice in
keysFromMasterSecret() and masterFromPreMasterSecret() so the length
need not be given; that's how it's done elsewhere in the file.
Fixes#13181
Change-Id: I92abaa892d1bba80c2d4f12776341cda7d538837
Reviewed-on: https://go-review.googlesource.com/16697
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
(This relands commit a4dcc692011bf1ceca9b1a363fd83f3e59e399ee.)
https://tools.ietf.org/html/rfc6066#section-3 states:
“Literal IPv4 and IPv6 addresses are not permitted in "HostName".”
However, if an IP literal was set as Config.ServerName (which could
happen as easily as calling Dial with an IP address) then the code would
send the IP literal as the SNI value.
This change filters out IP literals, as recognised by net.ParseIP, from
being sent as the SNI value.
Fixes#13111.
Change-Id: I6e544a78a01388f8fe98150589d073b917087f75
Reviewed-on: https://go-review.googlesource.com/16776
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is based on the implementation used in OpenSSL, from a
submission by Shay Gueron and myself. Besides using assembly,
this implementation employs several optimizations described in:
S.Gueron and V.Krasnov, "Fast prime field elliptic-curve
cryptography with 256-bit primes"
In addition a new and improved modular inverse modulo N is
implemented here.
The performance measured on a Haswell based Macbook Pro shows 21X
speedup for the sign and 9X for the verify operations.
The operation BaseMult is 30X faster (and the Diffie-Hellman/ECDSA
key generation that use it are sped up as well).
The adaptation to Go with the help of Filippo Valsorda
Updated the submission for faster verify/ecdh, fixed some asm syntax
and API problems and added benchmarks.
Change-Id: I86a33636747d5c92f15e0c8344caa2e7e07e0028
Reviewed-on: https://go-review.googlesource.com/8968
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
The compiler should not usually call Fconv with an infinity, but if
it does, Fconv will end in an endless loop. Test for infinities early.
Change-Id: I48f366466538b0bd26a851e01258725025babaff
Reviewed-on: https://go-review.googlesource.com/16777
Reviewed-by: Russ Cox <rsc@golang.org>
This is, in effect, what the gc toolchain does. It fixes cases where Go
code refers to a C global variable; without this, if the global variable
was the only thing visible in the C code, the generated cgo file might
not get pulled in from the archive, leaving the Go variable
uninitialized.
This was reported against gccgo as https://gcc.gnu.org/PR68255 .
Change-Id: I3e769dd174f64050ebbff268fbbf5e6fab1e2a1b
Reviewed-on: https://go-review.googlesource.com/16775
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
And enable PIE in cmd/go because that's all it seems to take.
Change-Id: Ie017f427ace5e91de333a9f7cba9684c4641dfd5
Reviewed-on: https://go-review.googlesource.com/14222
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change breaks out most of the atomics functions in the runtime
into package runtime/internal/atomic. It adds some basic support
in the toolchain for runtime packages, and also modifies linux/arm
atomics to remove the dependency on the runtime's mutex. The mutexes
have been replaced with spinlocks.
all trybots are happy!
In addition to the trybots, I've tested on the darwin/arm64 builder,
on the darwin/arm builder, and on a ppc64le machine.
Change-Id: I6698c8e3cf3834f55ce5824059f44d00dc8e3c2f
Reviewed-on: https://go-review.googlesource.com/14204
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Show more than one character when we recieve a unsolicited
response on an idle HTTP channel. Showing more than one
byte is really useful when you want to debug your program
when you get this message.
Change-Id: I3caf9f06420e7c2a2de3e4eb302c5dab95428fdb
Reviewed-on: https://go-review.googlesource.com/13959
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The current mechanism fails if clang cannot be executed by the current
user. Using the `-x` operator for `test` return TRUE if the file is
executable by the user.
Change-Id: I0f3c8dc3880c1ce5a8a833ff3109eb96853184af
Reviewed-on: https://go-review.googlesource.com/16752
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#12301
Change-Id: I8d01ec9551c6cff7e6129e06a7deb36a3be9de41
Reviewed-on: https://go-review.googlesource.com/16751
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I1da1d718609eb6a7b78d29b173ec780bde22c687
Reviewed-on: https://go-review.googlesource.com/16422
Reviewed-by: Ralph Corderoy <ralph@inputplus.co.uk>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
https://tools.ietf.org/html/rfc6066#section-3 states:
“Literal IPv4 and IPv6 addresses are not permitted in "HostName".”
However, if an IP literal was set as Config.ServerName (which could
happen as easily as calling Dial with an IP address) then the code would
send the IP literal as the SNI value.
This change filters out IP literals, as recognised by net.ParseIP, from
being sent as the SNI value.
Fixes#13111.
Change-Id: Ie9ec7acc767ae172b48c9c6dd8d84fa27b1cf0de
Reviewed-on: https://go-review.googlesource.com/16742
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
The heuristic for determining if the packages or commands are stale
fails as the mtime comparison happens even though the GOROOT and
current package paths are the same, since the path name isn't
canonicalized before the comparison (GOROOT is).
Fixes: #12690
Change-Id: Ia7d142fbbed8aac2bd2f71d1db4efd1f3ff5aece
Reviewed-on: https://go-review.googlesource.com/16483
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change is the same as CL #9345 which was reverted,
except for a small bug fix.
The only change is to the body of sendDirect and its callsite.
Also added a test.
The problem was during a channel send operation. The target
of the send was a sleeping goroutine waiting to receive. We
basically do:
1) Read the destination pointer out of the sudog structure
2) Copy the value we're sending to that destination pointer
Unfortunately, the previous change had a goroutine suspend
point between 1 & 2 (the call to sendDirect). At that point
the destination goroutine's stack could be copied (shrunk).
The pointer we read in step 1 is no longer valid for step 2.
Fixed by not allowing any suspension points between 1 & 2.
I suspect the old code worked correctly basically by accident.
Fixes#13169
The original 9345:
This change removes the retry mechanism we use for buffered channels.
Instead, any sender waking up a receiver or vice versa completes the
full protocol with its counterpart. This means the counterpart does
not need to relock the channel when it wakes up. (Currently
buffered channels need to relock on wakeup.)
For sends on a channel with waiting receivers, this change replaces
two copies (sender->queue, queue->receiver) with one (sender->receiver).
For receives on channels with a waiting sender, two copies are still required.
This change unifies to a large degree the algorithm for buffered
and unbuffered channels, simplifying the overall implementation.
Fixes#11506
Change-Id: I57dfa3fc219cffa4d48301ee15fe5479299efa09
Reviewed-on: https://go-review.googlesource.com/16740
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Error doesn't take a format string and appends its own newline. Phrase
the error like the other ones.
Change-Id: Ic3af857e5d4890207c74a6eb59a0d1067b503e1b
Reviewed-on: https://go-review.googlesource.com/16420
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Updates to git rev 042ba42f (https://golang.org/cl/16734)
This moves all the code for glueing the HTTP1 and HTTP2 transports
together out of net/http and into x/net/http2 where others can use it,
and where it has tests.
Change-Id: I143ac8bb61eed36c87fd838b682ebb37b81b8c2c
Reviewed-on: https://go-review.googlesource.com/16735
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mathieu Lonjaret <mathieu.lonjaret@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is needed now for subrepos to be able to conditionally use
API symbols found only after Go 1.5.
Change-Id: I91f8a1154e2a74008e8ca79490e3f12847f9c3b2
Reviewed-on: https://go-review.googlesource.com/16733
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mathieu Lonjaret <mathieu.lonjaret@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
duffzero was changed to use X0 instead of AX in
CL 14408. This was missed as part of that change.
Change-Id: I72fb0114cfbc035b83bfaa8631d27e6740da2652
Reviewed-on: https://go-review.googlesource.com/16717
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Other systems use pthread_sigmask. It was a mistake to use sigprocmask
here.
Change-Id: Ie045aa3f09cf035fcf807b7543b96fa5b847958a
Reviewed-on: https://go-review.googlesource.com/16720
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The GODEBUG option remains, for now, but only for turning it off.
We'll decide what to do with it before release.
This CL includes the dependent http2 change (https://golang.org/cl/16692)
in the http2 bundle (h2_bundle.go).
Updates golang/go#6891
Change-Id: If9723ef627c7ba4f7343dc8cb89ca88ef0fbcb10
Reviewed-on: https://go-review.googlesource.com/16693
Reviewed-by: Blake Mizerany <blake.mizerany@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that we're moving or zeroing pointers atomically.
Anything that is a multiple of pointer size and at least
pointer aligned might have pointers in it. All the code looks
ok except for the 1-pointer-sized moves.
Fixes#13160
Update #12552
Change-Id: Ib97d9b918fa9f4cc5c56c67ed90255b7fdfb7b45
Reviewed-on: https://go-review.googlesource.com/16668
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Duffcopy now uses X0, as of 5cf281a. Teach the peephole
optimizer that duffcopy clobbers X0 so that it does not
rename registers use X0 across the duffcopy instruction.
Fixes#13171
Change-Id: I389cbf1982cb6eb2f51e6152ac96736a8589f085
Reviewed-on: https://go-review.googlesource.com/16715
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Revert for now until #13169 is understood.
This reverts commit 8e496f1d69.
Change-Id: Ib3eb2588824ef47a2b6eb9e377a24e5c817fcc81
Reviewed-on: https://go-review.googlesource.com/16716
Reviewed-by: Keith Randall <khr@golang.org>
They reportedly occur with LLVM 3.7 on FreeBSD ARM.
Fixes#13139.
Change-Id: Ia7d053a8662696b1984e81fbd1d908c951c35a98
Reviewed-on: https://go-review.googlesource.com/16667
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Motivation:
* Reader.skipUnread never reports io.ErrUnexpectedEOF. This is strange
given that io.ErrUnexpectedEOF is given through Reader.Read if the
user manually reads the file.
* Reader.skipUnread fails to detect truncated files since io.Seeker
is lazy about reporting errors. Thus, the behavior of Reader differs
whether the input io.Reader also satisfies io.Seeker or not.
To solve this, we seek to one before the end of the data section and
always rely on at least one call to io.CopyN. If the tr.r satisfies
io.Seeker, this is guarunteed to never read more than blockSize.
Fixes#12557
Change-Id: I0ddddfc6bed0d74465cb7e7a02b26f1de7a7a279
Reviewed-on: https://go-review.googlesource.com/15175
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestBuildOutputToDevNull was added in CL 16585.
However, copying to /dev/null couldn't work on Plan 9,
because /dev/null is a regular file. Since it's not
different from any other file, the logic in copyFile
couldn't distinguish it from another, already existing,
file, that we wouldn't want to overwrite.
Change-Id: Ie8d353f318fedfc7cfb9541fed00a2397e232592
Reviewed-on: https://go-review.googlesource.com/16691
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
sradi and sradi. hide the top bit of their immediate argument apart from the
rest of it, but the code only handled the sradi case.
I'm pretty sure this is the only instruction missing (a couple of the rotate
instructions encode their immediate the same way but their handling looks OK).
This fixes the failure of "GOARCH=amd64 ~/go/bin/go install -v runtime" as
reported in the bug.
Fixes#11987
Change-Id: I0cdefcd7a04e0e8fce45827e7054ffde9a83f589
Reviewed-on: https://go-review.googlesource.com/16710
Reviewed-by: Minux Ma <minux@golang.org>
TestGoGenerateEnv was added in CL 16537.
However, Plan 9 doesn't have the env command.
Change-Id: I5f0c937a1b9b456dcea41ceac7865112f2f65c45
Reviewed-on: https://go-review.googlesource.com/16690
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
Currently mallocgc detects if the GC is in a state where it can't
assist, but also can't allocate uncontrolled and yields to help out
the GC. This was a workaround for periods when we were trying to
schedule the GC coordinator. It is no longer necessary because there
is no GC coordinator and malloc can always assist with any GC
transitions that are necessary.
Updates #11970.
Change-Id: I4f7beb7013e85e50ae99a3a8b0bb708ba49cbcd4
Reviewed-on: https://go-review.googlesource.com/16392
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
