Fixes#8074.
The issue was not reproduceable by revision
go version devel +e0ad7e329637 Thu Jun 19 22:19:56 2014 -0700 linux/arm
But include the original test case in case the issue reopens itself.
LGTM=dvyukov
R=golang-codereviews, dvyukov
CC=golang-codereviews
https://golang.org/cl/107290043
A runtime.Goexit during a panic-invoked deferred call
left the panic stack intact even though all the stack frames
are gone when the goroutine is torn down.
The next goroutine to reuse that struct will have a
bogus panic stack and can cause the traceback routines
to walk into garbage.
Most likely to happen during tests, because t.Fatal might
be called during a deferred func and uses runtime.Goexit.
This "not enough cleared in Goexit" failure mode has
happened to us multiple times now. Clear all the pointers
that don't make sense to keep, not just gp->panic.
Fixes#8158.
LGTM=iant, dvyukov
R=iant, dvyukov
CC=golang-codereviews
https://golang.org/cl/102220043
I am not sure what the rounding here was
trying to do, but it was skipping the first
pointer on native client.
The code above the rounding already checks
that xoffset is widthptr-aligned, so the rnd
was a no-op everywhere but on Native Client.
And on Native Client it was wrong.
Perhaps it was supposed to be rounding down,
not up, but zerorange handles the extra 32 bits
correctly, so the rnd does not seem to be necessary
at all.
This wouldn't be worth doing for Go 1.3 except
that it can affect code on the playground.
Fixes#8155.
LGTM=r, iant
R=golang-codereviews, r, iant
CC=dvyukov, golang-codereviews, khr
https://golang.org/cl/108740047
The 1-byte write was silently clearing a byte on the stack.
If there was another function call with more arguments
in the same stack frame, no harm done.
Otherwise, if the variable at that location was already zero,
no harm done.
Otherwise, problems.
Fixes#8139.
LGTM=dsymonds
R=golang-codereviews, dsymonds
CC=golang-codereviews, iant, r
https://golang.org/cl/100940043
We were requiring that the defer stack and the panic stack
be completely processed, thinking that if any were left over
the stack scan and the defer stack/panic stack must be out
of sync. It turns out that the panic stack may well have
leftover entries in some situations, and that's okay.
Fixes#8132.
LGTM=minux, r
R=golang-codereviews, minux, r
CC=golang-codereviews, iant, khr
https://golang.org/cl/100900044
The 'continuation pc' is where the frame will continue
execution, if anywhere. For a frame that stopped execution
due to a CALL instruction, the continuation pc is immediately
after the CALL. But for a frame that stopped execution due to
a fault, the continuation pc is the pc after the most recent CALL
to deferproc in that frame, or else 0. That is where execution
will continue, if anywhere.
The liveness information is only recorded for CALL instructions.
This change makes sure that we never look for liveness information
except for CALL instructions.
Using a valid PC fixes crashes when a garbage collection or
stack copying tries to process a stack frame that has faulted.
Record continuation pc in heapdump (format change).
Fixes#8048.
LGTM=iant, khr
R=khr, iant, dvyukov
CC=golang-codereviews, r
https://golang.org/cl/100870044
This CL forces the optimizer to preserve some memory stores
that would be redundant except that a stack scan due to garbage
collection or stack copying might look at them during a function call.
As such, it forces additional memory writes and therefore slows
down the execution of some programs, especially garbage-heavy
programs that are already limited by memory bandwidth.
The slowdown can be as much as 7% for end-to-end benchmarks.
These numbers are from running go1.test -test.benchtime=5s three times,
taking the best (lowest) ns/op for each benchmark. I am excluding
benchmarks with time/op < 10us to focus on macro effects.
All benchmarks are on amd64.
Comparing tip (a27f34c771cb) against this CL on an Intel Core i5 MacBook Pro:
benchmark old ns/op new ns/op delta
BenchmarkBinaryTree17 3876500413 3856337341 -0.52%
BenchmarkFannkuch11 2965104777 2991182127 +0.88%
BenchmarkGobDecode 8563026 8788340 +2.63%
BenchmarkGobEncode 5050608 5267394 +4.29%
BenchmarkGzip 431191816 434168065 +0.69%
BenchmarkGunzip 107873523 110563792 +2.49%
BenchmarkHTTPClientServer 85036 86131 +1.29%
BenchmarkJSONEncode 22143764 22501647 +1.62%
BenchmarkJSONDecode 79646916 85658808 +7.55%
BenchmarkMandelbrot200 4720421 4700108 -0.43%
BenchmarkGoParse 4651575 4712247 +1.30%
BenchmarkRegexpMatchMedium_1K 71986 73490 +2.09%
BenchmarkRegexpMatchHard_1K 111018 117495 +5.83%
BenchmarkRevcomp 648798723 659352759 +1.63%
BenchmarkTemplate 112673009 112819078 +0.13%
Comparing tip (a27f34c771cb) against this CL on an Intel Xeon E5520:
BenchmarkBinaryTree17 5461110720 5393104469 -1.25%
BenchmarkFannkuch11 4314677151 4327177615 +0.29%
BenchmarkGobDecode 11065853 11235272 +1.53%
BenchmarkGobEncode 6500065 6959837 +7.07%
BenchmarkGzip 647478596 671769097 +3.75%
BenchmarkGunzip 139348579 141096376 +1.25%
BenchmarkHTTPClientServer 69376 73610 +6.10%
BenchmarkJSONEncode 30172320 31796106 +5.38%
BenchmarkJSONDecode 113704905 114239137 +0.47%
BenchmarkMandelbrot200 6032730 6003077 -0.49%
BenchmarkGoParse 6775251 6405995 -5.45%
BenchmarkRegexpMatchMedium_1K 111832 113895 +1.84%
BenchmarkRegexpMatchHard_1K 161112 168420 +4.54%
BenchmarkRevcomp 876363406 892319935 +1.82%
BenchmarkTemplate 146273096 148998339 +1.86%
Just to get a sense of where we are compared to the previous release,
here are the same benchmarks comparing Go 1.2 to this CL.
Comparing Go 1.2 against this CL on an Intel Core i5 MacBook Pro:
BenchmarkBinaryTree17 4370077662 3856337341 -11.76%
BenchmarkFannkuch11 3347052657 2991182127 -10.63%
BenchmarkGobDecode 8791384 8788340 -0.03%
BenchmarkGobEncode 4968759 5267394 +6.01%
BenchmarkGzip 437815669 434168065 -0.83%
BenchmarkGunzip 94604099 110563792 +16.87%
BenchmarkHTTPClientServer 87798 86131 -1.90%
BenchmarkJSONEncode 22818243 22501647 -1.39%
BenchmarkJSONDecode 97182444 85658808 -11.86%
BenchmarkMandelbrot200 4733516 4700108 -0.71%
BenchmarkGoParse 5054384 4712247 -6.77%
BenchmarkRegexpMatchMedium_1K 67612 73490 +8.69%
BenchmarkRegexpMatchHard_1K 107321 117495 +9.48%
BenchmarkRevcomp 733270055 659352759 -10.08%
BenchmarkTemplate 109304977 112819078 +3.21%
Comparing Go 1.2 against this CL on an Intel Xeon E5520:
BenchmarkBinaryTree17 5986953594 5393104469 -9.92%
BenchmarkFannkuch11 4861139174 4327177615 -10.98%
BenchmarkGobDecode 11830997 11235272 -5.04%
BenchmarkGobEncode 6608722 6959837 +5.31%
BenchmarkGzip 661875826 671769097 +1.49%
BenchmarkGunzip 138630019 141096376 +1.78%
BenchmarkHTTPClientServer 71534 73610 +2.90%
BenchmarkJSONEncode 30393609 31796106 +4.61%
BenchmarkJSONDecode 139645860 114239137 -18.19%
BenchmarkMandelbrot200 5988660 6003077 +0.24%
BenchmarkGoParse 6974092 6405995 -8.15%
BenchmarkRegexpMatchMedium_1K 111331 113895 +2.30%
BenchmarkRegexpMatchHard_1K 165961 168420 +1.48%
BenchmarkRevcomp 995049292 892319935 -10.32%
BenchmarkTemplate 145623363 148998339 +2.32%
Fixes#8036.
LGTM=khr
R=golang-codereviews, josharian, khr
CC=golang-codereviews, iant, r
https://golang.org/cl/99660044
CL 51010045 fixed the first one of these:
cmd/gc: return canonical Node* from temp
For historical reasons, temp was returning a copy
of the created Node*, not the original Node*.
This meant that if analysis recorded information in the
returned node (for example, n->addrtaken = 1), the
analysis would not show up on the original Node*, the
one kept in fn->dcl and consulted during liveness
bitmap creation.
Correct this, and watch for it when setting addrtaken.
Fixes#7083.
R=khr, dave, minux.ma
CC=golang-codereviews
https://golang.org/cl/51010045
CL 53200043 fixed the second:
cmd/gc: fix race build
Missed this case in CL 51010045.
TBR=khr
CC=golang-codereviews
https://golang.org/cl/53200043
This CL fixes the third. There are only three nod(OXXX, ...)
calls in sinit.c, so maybe we're done. Embarassing that it
took three CLs to find all three.
Fixes#8028.
LGTM=khr
R=golang-codereviews, khr
CC=golang-codereviews, iant
https://golang.org/cl/100800046
In the first very rough draft of the reordering code
that was introduced in the Go 1.3 cycle, the pre-allocated
temporary for a ... argument was held in n->right.
It moved to n->alloc but the code avoiding n->right
was left behind in order.c. In copy(x, <-c), the receive
is in n->right and must be processed. Delete the special
case code, removing the bug.
Fixes#8039.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/100820044
The code cannot have worked before, because it was
trying to use the old value in a range check for the new
type, which might have a different representation
(hence the 'internal compiler error').
Fixes#8073.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/98630045
I don't know when the bug was fixed, but empirically it was.
Make sure it stays fixed by adding a test.
Fixes#7884.
LGTM=adg
R=golang-codereviews, adg
CC=golang-codereviews
https://golang.org/cl/93500043
The temporary-introducing pass was not recursing
into the argumnt of a receive operation.
Fixes#8011.
LGTM=r
R=golang-codereviews, r
CC=golang-codereviews, iant, khr
https://golang.org/cl/91540043
The introduction of temporaries in order.c was not
quite right for two corner cases:
1) The rewrite that pushed new variables on the lhs of
a receive into the body of the case was dropping the
declaration of the variables. If the variables escape,
the declaration is what allocates them.
Caught by escape analysis sanity check.
In fact the declarations should move into the body
always, so that we only allocate if the corresponding
case is selected. Do that. (This is an optimization that
was already present in Go 1.2. The new order code just
made it stop working.)
Fixes#7997.
2) The optimization to turn a single-recv select into
an ordinary receive assumed it could take the address
of the destination; not so if the destination is _.
Fixes#7998.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/100480043
The GC program describing a data structure sometimes trusts the
pointer base type and other times does not (if not, the garbage collector
must fall back on per-allocation type information stored in the heap).
Make the scanning of a pointer in an interface do the same.
This fixes a crash in a particular use of reflect.SliceHeader.
Fixes#8004.
LGTM=khr
R=golang-codereviews, khr
CC=0xe2.0x9a.0x9b, golang-codereviews, iant, r
https://golang.org/cl/100470045
Globals, function arguments, and results are special cases in
registerization.
Globals must be flushed aggressively, because nearly any
operation can cause a panic, and the recovery code must see
the latest values. Globals also must be loaded aggressively,
because nearly any store through a pointer might be updating a
global: the compiler cannot see all the "address of"
operations on globals, especially exported globals. To
accomplish this, mark all globals as having their address
taken, which effectively disables registerization.
If a function contains a defer statement, the function results
must be flushed aggressively, because nearly any operation can
cause a panic, and the deferred code may call recover, causing
the original function to return the current values of its
function results. To accomplish this, mark all function
results as having their address taken if the function contains
any defer statements. This causes not just aggressive flushing
but also aggressive loading. The aggressive loading is
overkill but the best we can do in the current code.
Function arguments must be considered live at all safe points
in a function, because garbage collection always preserves
them: they must be up-to-date in order to be preserved
correctly. Accomplish this by marking them live at all call
sites. An earlier attempt at this marked function arguments as
having their address taken, which disabled registerization
completely, making programs slower. This CL's solution allows
registerization while preserving safety. The benchmark speedup
is caused by being able to registerize again (the earlier CL
lost the same amount).
benchmark old ns/op new ns/op delta
BenchmarkEqualPort32 61.4 56.0 -8.79%
benchmark old MB/s new MB/s speedup
BenchmarkEqualPort32 521.56 570.97 1.09x
Fixes#1304. (again)
Fixes#7944. (again)
Fixes#7984.
Fixes#7995.
LGTM=khr
R=golang-codereviews, khr
CC=golang-codereviews, iant, r
https://golang.org/cl/97500044
The inputs to a function are marked live at all times in the
liveness bitmaps, so that the garbage collector will not free
the things they point at and reuse the pointers, so that the
pointers shown in stack traces are guaranteed not to have
been recycled.
Unfortunately, no one told the register optimizer that the
inputs need to be preserved at all call sites. If a function
is done with a particular input value, the optimizer will stop
preserving it across calls. For single-word values this just
means that the value recorded might be stale. For multi-word
values like slices, the value recorded could be only partially stale:
it can happen that, say, the cap was updated but not the len,
or that the len was updated but not the base pointer.
Either of these possibilities (and others) would make the
garbage collector misinterpret memory, leading to memory
corruption.
This came up in a real program, in which the garbage collector's
'slice len ≤ slice cap' check caught the inconsistency.
Fixes#7944.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews, khr
https://golang.org/cl/100370045
This is joint work with Daniel Morsing.
In order for the register allocator to alias two variables, they must have the same width, stack offset, and etype. Code generation was altering a variable's etype in a few places. This prevented the variable from being moved to a register, which in turn prevented peephole optimization. This failure to alias was very common, with almost 23,000 instances just running make.bash.
This phenomenon was not visible in the register allocation debug output because the variables that failed to alias had the same name. The debugging-only change to bits.c fixes this by printing the variable number with its name.
This CL fixes the source of all etype mismatches for 6g, all but one case for 8g, and depressingly few cases for 5g. (I believe that extending CL 6819083 to 5g is a prerequisite.) Fixing the remaining cases in 8g and 5g is work for the future.
The etype mismatch fixes are:
* [gc] Slicing changed the type of the base pointer into a uintptr in order to perform arithmetic on it. Instead, support addition directly on pointers.
* [*g] OSPTR was giving type uintptr to slice base pointers; undo that. This arose, for example, while compiling copy(dst, src).
* [8g] 64 bit float conversion was assigning int64 type during codegen, overwriting the existing uint64 type.
Note that some etype mismatches are appropriate, such as a struct with a single field or an array with a single element.
With these fixes, the number of registerizations that occur while running make.bash for 6g increases ~10%. Hello world binary size shrinks ~1.5%. Running all benchmarks in the standard library show performance improvements ranging from nominal to substantive (>10%); a full comparison using 6g on my laptop is available at https://gist.github.com/josharian/8f9b5beb46667c272064. The microbenchmarks must be taken with a grain of salt; see issue 7920. The few benchmarks that show real regressions are likely due to issue 7920. I manually examined the generated code for the top few regressions and none had any assembly output changes. The few benchmarks that show extraordinary improvements are likely also due to issue 7920.
Performance results from 8g appear similar to 6g.
5g shows no performance improvements. This is not surprising, given the discussion above.
Update #7316
LGTM=rsc
R=rsc, daniel.morsing, bradfitz
CC=dave, golang-codereviews
https://golang.org/cl/91850043
Before we used line 1 of the first source file.
This should be clearer.
Fixes#4388.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/92250044
The register allocator decides which variables should be placed into registers by charging for each load/store and crediting for each use, and then selecting an allocation with minimal cost. NOPs will be eliminated, however, so using a variable in a NOP should not generate credit.
Issue 7867 arises from attempted registerization of multi-word variables because they are used in NOPs. By not crediting for that use, they will no longer be considered for registerization.
This fix could theoretically lead to better register allocation, but NOPs are rare relative to other instructions.
Fixes#7867.
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/94810044
Variables declared with 'var' have no sym->def.
Fixes#7794.
LGTM=rsc
R=golang-codereviews, bradfitz, rsc
CC=golang-codereviews
https://golang.org/cl/88360043
1. On entry to a function, only zero the ambiguously live stack variables.
Before, we were zeroing all stack variables containing pointers.
The zeroing is pretty inefficient right now (issue 7624), but there are also
too many stack variables detected as ambiguously live (issue 7345),
and that must be addressed before deciding how to improve the zeroing code.
(Changes in 5g/ggen.c, 6g/ggen.c, 8g/ggen.c, gc/pgen.c)
Fixes#7647.
2. Make the regopt word-based liveness analysis preserve the
whole-variable liveness property expected by the garbage collection
bitmap liveness analysis. That is, if the regopt liveness decides that
one word in a struct needs to be preserved, make sure it preserves
the entire struct. This is particularly important for multiword values
such as strings, slices, and interfaces, in which all the words need
to be present in order to understand the meaning.
(Changes in 5g/reg.c, 6g/reg.c, 8g/reg.c.)
Fixes#7591.
3. Make the regopt word-based liveness analysis treat a variable
as having its address taken - which makes it preserved across
all future calls - whenever n->addrtaken is set, for consistency
with the gc bitmap liveness analysis, even if there is no machine
instruction actually taking the address. In this case n->addrtaken
is incorrect (a nicer way to put it is overconservative), and ideally
there would be no such cases, but they can happen and the two
analyses need to agree.
(Changes in 5g/reg.c, 6g/reg.c, 8g/reg.c; test in bug484.go.)
Fixes crashes found by turning off "zero everything" in step 1.
4. Remove spurious VARDEF annotations. As the comment in
gc/pgen.c explains, the VARDEF must immediately precede
the initialization. It cannot be too early, and it cannot be too late.
In particular, if a function call sits between the VARDEF and the
actual machine instructions doing the initialization, the variable
will be treated as live during that function call even though it is
uninitialized, leading to problems.
(Changes in gc/gen.c; test in live.go.)
Fixes crashes found by turning off "zero everything" in step 1.
5. Do not treat loading the address of a wide value as a signal
that the value must be initialized. Instead depend on the existence
of a VARDEF or the first actual read/write of a word in the value.
If the load is in order to pass the address to a function that does
the actual initialization, treating the load as an implicit VARDEF
causes the same problems as described in step 4.
The alternative is to arrange to zero every such value before
passing it to the real initialization function, but this is a much
easier and more efficient change.
(Changes in gc/plive.c.)
Fixes crashes found by turning off "zero everything" in step 1.
6. Treat wide input parameters with their address taken as
initialized on entry to the function. Otherwise they look
"ambiguously live" and we will try to emit code to zero them.
(Changes in gc/plive.c.)
Fixes crashes found by turning off "zero everything" in step 1.
7. An array of length 0 has no pointers, even if the element type does.
Without this change, the zeroing code complains when asked to
clear a 0-length array.
(Changes in gc/reflect.c.)
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/80160044
Revision 3ae4607a43ff introduced CONVNOP layers
to fix type checking issues arising from comparisons.
The added complexity made 8g run out of registers
when compiling an equality function in go.net/ipv6.
A similar issue occurred in test/sizeof.go on
amd64p32 with 6g.
Fixes#7405.
LGTM=khr
R=rsc, dave, iant, khr
CC=golang-codereviews
https://golang.org/cl/78100044
A too large float constant is an error.
A too small float constant is rounded to zero.
Fixes#7419
Update #6902
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/76730046
The lowering to runtime calls introduces hidden pointers to the
arguments of select clauses. When implicit conversions were
involved it could end up with incompatible pointers. Since the
pointed-to types have the same representation, we can introduce a
forced conversion.
Fixes#6847.
LGTM=rsc
R=rsc, iant, khr
CC=golang-codereviews
https://golang.org/cl/72380043
The byte that r is or'd into is already 0x7, so the failure to zero r only
impacts the generated machine code if the register is > 7.
Fixes#7044.
LGTM=dave, minux.ma, rsc
R=dave, minux.ma, bradfitz, rsc
CC=golang-codereviews
https://golang.org/cl/73730043
Revision c0e0467635ec (cmd/gc: return canonical Node* from temp)
exposed original nodes of temporaries, allowing callers to mutate
their types.
In walkcompare a temporary could be typed as ideal because of
this. Additionnally, assignment of a comparison result to
a custom boolean type was broken.
Fixes#7366.
LGTM=rsc
R=rsc, iant, khr
CC=golang-codereviews
https://golang.org/cl/66930044
The error message was previously off by one in all cases.
Fixes#7150.
LGTM=r
R=golang-codereviews, r
CC=golang-codereviews
https://golang.org/cl/65850043
Not recording the address being taken was causing
the liveness analysis not to preserve x in the absence
of direct references to x, which in turn was making the
net test fail with GOGC=0.
In addition to the test, this fixes a bug wherein
GOGC=0 go test -short net
crashed if liveness analysis was in use (like at tip, not like Go 1.2).
TBR=ken2
CC=golang-codereviews
https://golang.org/cl/64470043
The existing tests issue4463.go and issue4654.go had failures at
typechecking and did not test walking the AST.
Fixes#7272.
LGTM=khr
R=khr, rsc, iant
CC=golang-codereviews
https://golang.org/cl/60550044
For historical reasons, temp was returning a copy
of the created Node*, not the original Node*.
This meant that if analysis recorded information in the
returned node (for example, n->addrtaken = 1), the
analysis would not show up on the original Node*, the
one kept in fn->dcl and consulted during liveness
bitmap creation.
Correct this, and watch for it when setting addrtaken.
Fixes#7083.
R=khr, dave, minux.ma
CC=golang-codereviews
https://golang.org/cl/51010045
Nodes of goto statements were corrupted when written
to export data.
Fixes#7023.
R=rsc, dave, minux.ma
CC=golang-codereviews
https://golang.org/cl/46190043
Gccgo doesn't have the same equivalent of file name and
package as the gc compiler, so the error messages are
necessarily different.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/40510048
fixedbugs/issue4510.dir/f2.go:7: error: 'fmt' defined as both imported name and global name
f1.go:7: note: 'fmt' imported here
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/41530044
const1.go:33: error: integer constant overflow
<similar errors omitted>
const1.go:64: error: division by zero
const1.go:67: error: floating point constant overflow
const1.go:68: error: floating point constant overflow
const1.go:69: error: floating point constant overflow
const1.go:70: error: division by zero
const1.go:71: error: expected integer type
const1.go:77: error: argument 1 has incompatible type (cannot use type int8 as type int)
const1.go:78: error: argument 1 has incompatible type (cannot use type int8 as type int)
const1.go:79: error: argument 1 has incompatible type (cannot use type uint8 as type int)
const1.go:81: error: argument 1 has incompatible type (cannot use type float32 as type int)
const1.go:82: error: argument 1 has incompatible type (cannot use type float64 as type int)
const1.go:83: error: floating point constant truncated to integer
const1.go:85: error: argument 1 has incompatible type (cannot use type float64 as type int)
const1.go:86: error: argument 1 has incompatible type (cannot use type string as type int)
const1.go:87: error: argument 1 has incompatible type (cannot use type bool as type int)
const1.go:90: error: const initializer cannot be nil
const1.go:91: error: expression is not constant
const1.go:92: error: expression is not constant
const1.go:93: error: invalid constant type
const1.go:94: error: invalid constant type
fixedbugs/bug462.go:17: error: unknown field 'os.File' in 'T'
fixedbugs/issue3705.go:9: error: cannot declare init - must be func
fixedbugs/issue4251.go:12: error: inverted slice range
fixedbugs/issue4251.go:16: error: inverted slice range
fixedbugs/issue4251.go:20: error: inverted slice range
fixedbugs/issue4405.go:11: error: invalid character 0x7 in identifier
fixedbugs/issue4405.go:12: error: invalid character 0x8 in identifier
fixedbugs/issue4405.go:13: error: invalid character 0xb in identifier
fixedbugs/issue4405.go:14: error: invalid character 0xc in identifier
fixedbugs/issue4429.go:15: error: expected pointer
fixedbugs/issue4517d.go:9: error: cannot import package as init
fixedbugs/issue4545.go:17: error: invalid context-determined non-integer type for left operand of shift
fixedbugs/issue4545.go:16: error: incompatible types in binary expression
fixedbugs/issue4610.go:15: error: expected ';' or '}' or newline
fixedbugs/issue4610.go:16: error: expected declaration
fixedbugs/issue4654.go:15: error: value computed is not used
<similar errors omitted>
fixedbugs/issue4776.go:9: error: program must start with package clause
fixedbugs/issue4776.go:9: error: expected ';' or newline after package clause
fixedbugs/issue4813.go:31: error: index must be integer
<similar errors omitted>
fixedbugs/issue4847.go:22: error: initialization expression for 'matchAny' depends upon itself
fixedbugs/issue5089.go:13: error: redefinition of 'bufio.Buffered': receiver name changed
fixedbugs/issue5089.go:11: note: previous definition of 'bufio.Buffered' was here
fixedbugs/issue5172.go:17: error: reference to undefined field or method 'bar'
fixedbugs/issue5172.go:18: error: reference to undefined field or method 'bar'
fixedbugs/issue5172.go:12: error: use of undefined type 'bar'
fixedbugs/issue5358.go:16: error: argument 2 has incompatible type
fixedbugs/issue5581.go:29: error: use of undefined type 'Blah'
funcdup.go:10: error: redefinition of 'i'
funcdup.go:10: note: previous definition of 'i' was here
<similar errors omitted>
funcdup2.go:10: error: redefinition of 'i'
funcdup2.go:10: note: previous definition of 'i' was here
<similar errors omitted>
slice3err.go:20: error: middle index required in 3-index slice
<similar errors omitted>
slice3err.go:20: error: final index required in 3-index slice
<similar errors omitted>
slice3err.go:21: error: final index required in 3-index slice
slice3err.go:46: error: invalid 3-index slice of string
<similar errors omitted>
slice3err.go:57: error: inverted slice range
<similar errors omitted>
slice3err.go:62: error: invalid slice index: capacity less than length
slice3err.go:64: error: invalid slice index: capacity less than start
slice3err.go:65: error: invalid slice index: capacity less than start
slice3err.go:66: error: invalid slice index: capacity less than start
slice3err.go:68: error: invalid slice index: capacity less than length
slice3err.go:70: error: invalid slice index: capacity less than start
slice3err.go:80: error: invalid slice index: capacity less than length
slice3err.go:82: error: invalid slice index: capacity less than start
slice3err.go:83: error: invalid slice index: capacity less than start
slice3err.go:84: error: invalid slice index: capacity less than start
slice3err.go:86: error: invalid slice index: capacity less than length
slice3err.go:88: error: invalid slice index: capacity less than start
slice3err.go:99: error: array index out of bounds
<similar errors omitted>
slice3err.go:106: error: invalid slice index: capacity less than length
slice3err.go:107: error: invalid slice index: capacity less than start
slice3err.go:118: error: invalid slice index: capacity less than length
slice3err.go:119: error: invalid slice index: capacity less than start
syntax/semi1.go:10: error: missing '{' after if clause
syntax/semi1.go:10: error: reference to undefined name 'x'
syntax/semi1.go:10: error: reference to undefined name 'y'
syntax/semi1.go:12: error: reference to undefined name 'z'
syntax/semi2.go:10: error: missing '{' after switch clause
syntax/semi2.go:10: error: reference to undefined name 'x'
syntax/semi3.go:10: error: missing '{' after for clause
syntax/semi3.go:10: error: reference to undefined name 'x'
syntax/semi3.go:10: error: reference to undefined name 'y'
syntax/semi3.go:10: error: reference to undefined name 'z'
syntax/semi3.go:12: error: reference to undefined name 'z'
syntax/semi4.go:11: error: missing '{' after for clause
syntax/semi4.go:10: error: reference to undefined name 'x'
syntax/semi4.go:12: error: reference to undefined name 'z'
typecheck.go:12: error: reference to undefined name 'b'
typecheck.go:17: error: reference to undefined name 'c'
typecheck.go:11: error: use of undefined type 'b'
typecheck.go:16: error: not enough arguments
typecheck.go:17: error: not enough arguments
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/41520044
There is no necessary relationship between the imports of the
packages a and b, and gccgo happens to import them in a
different order, leading to different output. This ordering
is not the purpose of the test in any case.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/40400043
Types in function scope can have methods on them if they embed another type, but we didn't make the name unique, meaning that 2 identically named types in different functions would conflict with eachother.
Fixes#6269.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13326045
The compiler computes initialization order by finding
a spanning tree between a package's global variables.
But it does so by walking both variables and functions
and stops detecting cycles between variables when they
mix with a cycle of mutually recursive functions.
Fixes#4847.
R=golang-dev, daniel.morsing, rsc
CC=golang-dev
https://golang.org/cl/9663047
Individual variables bigger than 10 MB are now
moved to the heap, as if they had escaped on
their own.
This avoids ridiculous stacks for programs that
do things like
x := [1<<30]byte{}
... use x ...
If 10 MB is too small, we can raise the limit.
Fixes#6077.
R=ken2
CC=golang-dev
https://golang.org/cl/12650045
Backends do not exactly expect receiving binary operators with
constant operands or use workarounds to move them to
register/stack in order to handle them.
Fixes#5841.
R=golang-dev, daniel.morsing, rsc
CC=golang-dev
https://golang.org/cl/11107044
clearfat (used to zero initialize structures) will use AX for x86 block ops. If we write to AX while calculating the dest pointer, we will fill the structure with incorrect values.
Since 64-bit arithmetic uses AX to synthesize a 64-bit register, getting an adress by indexing with 64-bit ops can clobber the register.
Fixes#5820.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/11383043
Deferred functions are not run by a call instruction. They are run by
the runtime editing registers to make the call start with a caller PC
returning to a
CALL deferreturn
instruction.
That instruction has always had the line number of the function's
closing brace, but that instruction's line number is irrelevant.
Stack traces show the line number of the instruction before the
return PC, because normally that's what started the call. Not so here.
The instruction before the CALL deferreturn could be almost anywhere
in the function; it's unrelated and its line number is incorrect to show.
Fix the line number by inserting a true hardware no-op with the right
line number before the returned-to CALL instruction. That is, the deferred
calls now appear to start with a caller PC returning to the second instruction
in this sequence:
NOP
CALL deferreturn
The traceback will show the line number of the NOP, which we've set
to be the line number of the function's closing brace.
The NOP here is not the usual pseudo-instruction, which would be
elided by the linker. Instead it is the real hardware instruction:
XCHG AX, AX on 386 and amd64, and AND.EQ R0, R0, R0 on ARM.
Fixes#5856.
R=ken2, ken
CC=golang-dev
https://golang.org/cl/11223043
Escape analysis needs the right curfn value on a dclfunc node, otherwise it will not analyze the function.
When generating method value wrappers, we forgot to set the curfn correctly.
Fixes#5753.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/10383048
A struct with a single field was considered as equivalent to the
field type, which is incorrect is the field is blank.
Fields with padding could make the compiler think some
types are comparable when they are not.
Fixes#5698.
R=rsc, golang-dev, daniel.morsing, bradfitz, gri, r
CC=golang-dev
https://golang.org/cl/10271046
Design doc at golang.org/s/go12slice.
This is an experimental feature and may not be included in the release.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/10743046
Exported inlined functions that perform a string conversion
using a non-exported named type may miss it in export data.
Fixes#5755.
R=rsc, golang-dev, ality, r
CC=golang-dev
https://golang.org/cl/10464043
The existing compilers convert empty strings to empty
but non-nil byte and rune slices. The spec required
a nil byte and rune slice in those cases. That seems
an odd additional requirement. Adjust the spec to
match the reality.
Also, removed over-specification for conversions of
nil []byte and []rune: such nil slices already act
like empty slices and thus don't need extra language.
Added extra examples instead.
Fixes#5704.
R=rsc, r, iant
CC=golang-dev
https://golang.org/cl/10440045
This avoids problems with inlining in genwrappers, which
occurs after functions have been compiled. Compiling a
function may cause some unused local vars to be removed from
the list. Since a local var may be unused due to
optimization, it is possible that a removed local var winds up
beingused in the inlined version, in which case hilarity
ensues.
Fixes#5515.
R=golang-dev, khr, dave
CC=golang-dev
https://golang.org/cl/10210043
It works on i386, but fails on amd64 and arm.
««« original CL description
runtime: prevent the GC from seeing the content of a frame in runfinq()
Fixes#5348.
R=golang-dev, dvyukov
CC=golang-dev
https://golang.org/cl/8954044
»»»
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/8695051
They caused internal compiler errors and they're expensive enough that inlining them doesn't make sense.
Fixes#5259.
R=golang-dev, r, iant, remyoudompheng
CC=golang-dev
https://golang.org/cl/8636043
The offset of an embedded field s.X must be relative to s
and not to the implicit s.Field of which X is a direct field.
Moreover, no indirections may happen on the path.
Fixes#4909.
R=nigeltao, ality, daniel.morsing, iant, gri, r
CC=golang-dev
https://golang.org/cl/8287043
Reusing it when multiple comparisons occurred in the same
function call led to bad overwriting.
Fixes#5162.
R=golang-dev, daniel.morsing
CC=golang-dev
https://golang.org/cl/8174047
Usually, there is no esc info when inlining, but there will be when generating inlined wrapper functions.
If we don't use this information, we get invalid addresses on the stack.
Fixes#5056.
R=golang-dev, rsc
CC=golang-dev, remyoudompheng
https://golang.org/cl/7850045
