unsafe.Pointer safety rule #4 says "The compiler handles a Pointer
converted to a uintptr in the argument list of a call". Within escape
analysis, we've always required this be a single conversion
unsafe.Pointer->uintptr conversion, but the corresponding logic in
order is somewhat laxer, allowing arbitrary chains of OCONVNOPs from
unsafe.Pointer to uintptr.
This CL changes order to be stricter to match escape analysis.
Passes toolstash-check.
Change-Id: Iadd210d2123accb2020f5728ea2a47814f703352
Reviewed-on: https://go-review.googlesource.com/c/go/+/229578
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Clean up the code a little bit to make it clearer:
Don't check throwsplit for a SI_USER signal.
If throwsplit is set for a SigPanic signal, always throw;
discard any other flags.
Fixes#36420
Change-Id: Ic9dcd1108603d241f71c040504dfdc6e528f9767
Reviewed-on: https://go-review.googlesource.com/c/go/+/228900
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Given:
type u struct{}
func (u) M() {}
type t struct { u; u2 u }
var v = reflect.ValueOf(t{})
Package reflect allows:
v.Method(0) // v.M
v.Field(0).Method(0) // v.u.M
but panics from:
v.Field(1).Method(0) // v.u2.M
because u2 is not an exported field. However, u is not an exported
field either, so this is inconsistent.
It seems like this behavior originates from #12367, where it was
decided to allow traversing unexported embedded fields to be able to
access their exported fields, since package reflect doesn't provide an
alternative way to access promoted fields directly.
But extending that logic to promoted *methods* was inappropriate,
because package reflect's normal method handling logic already handles
promoted methods correctly. This CL corrects that mistake.
Fixes#38521.
Change-Id: If65008965f35927b4e7927cddf8614695288eb19
Reviewed-on: https://go-review.googlesource.com/c/go/+/228902
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These are analogous to URL.RawPath and URL.EscapedPath
and allow users fine-grained control over how the fragment
section of the URL is escaped. Some tools care about / vs %2f,
same problem as in paths.
Fixes#37776.
Change-Id: Ie6f556d86bdff750c47fe65398cbafd834152b47
Reviewed-on: https://go-review.googlesource.com/c/go/+/227645
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
This is a roll forward of CL 224588 which was rolled back due to
test failures. In this version, the test is in the time package,
not the time/tzdata package. That lets us compare the zip file
to the time/tzdata package, ensuring that we are looking at similar
versions of tzdata information.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: I916d9d8473abe201b897cdc2bbd9168df4ad671c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228101
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This reverts CL 224588.
Reason for revert: Test failing on secondary platforms.
Change-Id: Ic15fdc73a0d2b860e776733abb82c58809e13160
Reviewed-on: https://go-review.googlesource.com/c/go/+/228200
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: Iffddee72a8f46c95fee3bcde43c142d6899d9246
Reviewed-on: https://go-review.googlesource.com/c/go/+/224588
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
The repository of delve has already switched from the personal
account github.com/derekparker/delve to the organization account
github.com/go-delve/delve. According to go-delve/delve#1456.
Change-Id: Ie64f72c2808a8aca5059a75e2c2f11d8691e66b3
GitHub-Last-Rev: f90120c3b3
GitHub-Pull-Request: golang/go#38387
Reviewed-on: https://go-review.googlesource.com/c/go/+/227999
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Adds an entry in the Go1.15 release notes, but also
adds an example test for URL.Redacted.
Follow-up of CL 207082.
Updates #37419
Change-Id: Ibf81989778907511a3a3a3e4a03d1802b5dd9762
Reviewed-on: https://go-review.googlesource.com/c/go/+/227997
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
flag treats -h or -help as a special case to print a nice help
message, but exit with a status code of 2. This update makes
that status code 0.
Fixes#37533
Change-Id: I7e0bd29944ce46607fb7cfc6740734f7444a151a
GitHub-Last-Rev: 83f64d757b
GitHub-Pull-Request: golang/go#37530
Reviewed-on: https://go-review.googlesource.com/c/go/+/221427
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: I35dd218823fe8cb9383e9ac7bbfec2cc8a358748
Reviewed-on: https://go-review.googlesource.com/c/go/+/226460
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Go build scripts on UNIX (make.bash, all.bash) have not required
GOROOT_BOOTSTRAP since August 2017 (CL 57753). Windows build scripts
have followed suit since CL 96455. Most people building Go will have
a Go toolchain in their PATH and will not need to specify a different
toolchain.
This CL removes the GOROOT_BOOTSTRAP mention from the contribution guide
(it was there for Windows only, but it's not required anymore). The guide
is meant to be light and clear for beginners and is not supposed to be
a reference, so there's not need to keep mentioning GOROOT_BOOTSTRAP.
Also update install-source.html to reflect the current status quo,
where using the PATH is probably the first and most used default, and
GOROOT_BOOTSTRAP is just an option.
Change-Id: Iab453e61b0c749c256aaaf81ea9b2ae58822cb89
Reviewed-on: https://go-review.googlesource.com/c/go/+/224717
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This reverts CL 223257.
Reason for revert: broke TestScript/mod_gonoproxy on the longtest builders.
Change-Id: I8637c52c5a7d5333a37ed1e9998c49786525ecb1
Reviewed-on: https://go-review.googlesource.com/c/go/+/225757
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: If53152ec1c3282c67d4909818b666af58884fb2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/223257
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If TestMain reports a wrong exit code to os.Exit, the test will be
exited with exist code inconsist with test results.
This CL eliminates the requirement of calling os.Exit in TestMain.
Now, m.Run records the execution status of its test, the outer
main func will call os.Exit with that exit code if TestMain does
not call os.Exit.
If TestMain does not call m.Run, the outer main func remain calls
os.Exit(0) as before.
Fixes#34129
Change-Id: I9598023e03b0a6260f0217f34df41c231c7d6489
Reviewed-on: https://go-review.googlesource.com/c/go/+/219639
Reviewed-by: Ian Lance Taylor <iant@golang.org>
currently the snippet is segmented but should be one code snippet.
Change-Id: Ic747faf9bb1b52f9d1786eca70616a05b71ee801
Reviewed-on: https://go-review.googlesource.com/c/go/+/211198
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Make panics more useful by printing values, if their
underlying kind is printable, instead of just their memory address.
Thus now given any custom type derived from any of:
float*, int*, string, uint*
if we have panic with such a result, its value will be printed.
Thus given any of:
type MyComplex128 complex128
type MyFloat64 float64
type MyString string
type MyUintptr uintptr
panic(MyComplex128(32.1 + 10i))
panic(MyFloat64(-93.7))
panic(MyString("This one"))
panic(MyUintptr(93))
They will now print in the panic:
panic: main.MyComplex64(+1.100000e-001+3.000000e+000i)
panic: main.MyFloat64(-9.370000e+001)
panic: main.MyString("This one")
panic: main.MyUintptr(93)
instead of:
panic: (main.MyComplex128) (0xe0100,0x138cc0)
panic: (main.MyFloat64) (0xe0100,0x138068)
panic: (main.MyString) (0x48aa00,0x4c0840)
panic: (main.MyUintptr) (0xe0100,0x137e58)
and anything else will be printed as in the past with:
panic: (main.MyStruct) (0xe4ee0,0x40a0e0)
Also while here, updated the Go1.15 release notes.
Fixes#37531
Change-Id: Ia486424344a386014f2869ab3483e42a9ef48ac4
Reviewed-on: https://go-review.googlesource.com/c/go/+/221779
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL documents that unsynchronized send and close operations
on a channel are detected as a race condition.
Fixes#27769
Change-Id: I7495a2d0dd834c3f3b6339f8ca18ea21ae979aa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/219637
Reviewed-by: Rob Pike <r@golang.org>
This removes much of the complexity of the implementation and use of
the cmd/go/internal/cmdflag package, and makes the behavior of GOFLAGS
in 'go test' and 'go vet' more consistent with other subcommands.
Some of the complexity reduction has been offset by code comments and
bug fixes, particularly for the handling of GOPATH arguments and flag
terminators ('--').
Fixes#32471Fixes#18682
Change-Id: I1f6e46a7c679062e1e409e44a2b9f03b9172883b
Reviewed-on: https://go-review.googlesource.com/c/go/+/211358
Reviewed-by: Jay Conrod <jayconrod@google.com>
Adding a link to this guide will provide more value to instructing Go
users to migrate to modules.
Updates #36878
Change-Id: Ie6ab45efcd35cc5e5ba5adc16ba0ca4cca4292bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/220906
Run-TryBot: Alexander Rakoczy <alex@golang.org>
Reviewed-by: thepudds <thepudds1460@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As far as I can tell, there is no public documentation on this topic,
which cost me several days of debugging.
I am possibly unusual in that I run binaries in production with the
race detector turned on, but I think that others who do the same may
want to be aware of the risk.
Updates #26813.
Updates #37233.
Change-Id: I1f8111bd01d0000596e6057b7cb5ed017d5dc655
Reviewed-on: https://go-review.googlesource.com/c/go/+/220586
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Use consistent indentation for one of the paragraphs.
Include issue number in the visible text, so it is easier to read.
Fixes#36878
Change-Id: Iab857b26b1d27b0137e981126207089db108d530
Reviewed-on: https://go-review.googlesource.com/c/go/+/220646
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL implements Ticker.Reset method in time package.
Benchmark:
name time/op
TickerReset-12 6.41µs ±10%
TickerResetNaive-12 95.7µs ±12%
Fixes#33184
Change-Id: I4cbd31796efa012b2a297bb342158f11a4a31fef
Reviewed-on: https://go-review.googlesource.com/c/go/+/220424
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 217362 (6e5652bebede2d53484a872f6d1dfeb498b0b50c.)
Reason for revert: Causing failures on arm64 bots. See #33184 for more info
Change-Id: I72ba40047e4138767d95aaa68842893c3508c52f
Reviewed-on: https://go-review.googlesource.com/c/go/+/220638
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL implements Ticker.Reset method in time package.
Benchmark:
name time/op
TickerReset-12 6.41µs ±10%
TickerResetNaive-12 95.7µs ±12%
Fixes#33184
Change-Id: I12c651f81e452541bcbbc748b45f038aae1f8dae
Reviewed-on: https://go-review.googlesource.com/c/go/+/217362
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It might break a program if it was depending on undocumented behavior.
Give a proper heads up.
Fixes#37308.
Change-Id: Id65bc70def1138d5506b694329c52250b417ec6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/220418
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Copied from go1.14.html, with changes redacted back to TODOs following
the model of CL 195058.
'relnote -html' does not report any changes at this time.
Updates #33738
Change-Id: I580232805ab7db35935f3e1ba03b720be4796a7e
Reviewed-on: https://go-review.googlesource.com/c/go/+/220278
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Given that it's a package that did not exist before, was a proposal
in issue #28322, got accepted and implemented for 1.14, it seems to
be more than a minor change to the library. Highlight it accordingly.
Also specify the results are 64-bit integers, as done in CL 219340.
Updates #36878
Updates #28322
Change-Id: Idefe63d4c47a02cdcf8be8ab08c40cdb94ff2098
Reviewed-on: https://go-review.googlesource.com/c/go/+/219877
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Toshihiro Shiino <shiino.toshihiro@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These were left out of CL 216759 because they are trivial, but I was
advised to be thorough.
Updates #36878
Change-Id: Id4fd3a84866a82265e3f89abfdad6e3d231b507c
Reviewed-on: https://go-review.googlesource.com/c/go/+/218918
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Moved /doc/modules.md from GOROOT to x/website. The corresponding
change in x/website is CL 218239. See explanation there.
Updates #33637
Change-Id: I329935624e6e264873bc68b6487405a63d3e7030
Reviewed-on: https://go-review.googlesource.com/c/go/+/218240
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
"Minor changes to the library" are basically arranged in alphabetical
order, but there are some mistakes so we will correct them.
Updates #36878
Change-Id: I8498563b739eff9f1b0a76ead3cf290191e0ce36
Reviewed-on: https://go-review.googlesource.com/c/go/+/218638
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For convenience, TempFile in io/ioutil now has a link to the document.
Updates #36878
Change-Id: I5c22f57c886badd8ca423e34527c4b4bb029847b
Reviewed-on: https://go-review.googlesource.com/c/go/+/218637
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
