We split the output into blocks and write them in parallel. The
block boundary is placed at symbol boundary. In the case of outer
symbols and sub symbols, currently we may split an outer symbol
into two blocks. This will be bad, as the two blocks will have
overlapping address range, since outer symbol and its sub symbols
occupies the same address range.
Make sure we place block boundary only at top-level symbol
boundaries.
Fix boringcrypto build.
Change-Id: I56811d3969c65c6be97672d8e1f1ea36b2447465
Reviewed-on: https://go-review.googlesource.com/c/go/+/227957
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Adds an entry in the Go1.15 release notes, but also
adds an example test for URL.Redacted.
Follow-up of CL 207082.
Updates #37419
Change-Id: Ibf81989778907511a3a3a3e4a03d1802b5dd9762
Reviewed-on: https://go-review.googlesource.com/c/go/+/227997
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In the review of CL 222923, Keith expressed concern
that we could end up with invalid phis.
We have some code to handle this, but on further reflection,
I think it might not handle some cases in which phis get moved.
I can't create a failing case, but guard against it nevertheless.
Change-Id: Ib3a07ac1d36a674c72dcb9cc9261ccfcb716b5a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/227697
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 226737 optimizes len check when make slice. The comment that cap is
constrainted to [0, 2^31) is not quite true, it's 31 or 63 depends on
whether it's 32/64-bit systems.
Change-Id: I6f54e41827ffe4d0b67a44975da3ce07b2fabbad
Reviewed-on: https://go-review.googlesource.com/c/go/+/227803
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Move a lot of the constant folding rules to use strongly
typed AuxInt fields.
We need more than a cast to convert AuxInt to, e.g., float32.
Make conversion functions for converting back and forth.
Change-Id: Ia3d95ee3583ee2179a10938e20210a7617358c88
Reviewed-on: https://go-review.googlesource.com/c/go/+/227866
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The race detector can't handle ASLR (adddress space layout randomization).
On some platforms it can re-exec the binary with ASLR off. But not NetBSD.
For NetBSD we have to introduce a special ELF header note that tells
the kernel not to use ASLR.
This works fine for internal linking. For external linking it also works,
but "readelf -n" shows multiple notes in the resulting binary. Maybe the
last one wins? Not sure, but it appears to work.
Change-Id: I5fe6dd861e42a8293f64d0dacb166631ea670fcc
Reviewed-on: https://go-review.googlesource.com/c/go/+/227864
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
This reverts commit 98534812bd.
Reason for revert: The change does not really fixes issue #38251. CL 227497 is real fix.
Change-Id: I9f556005baf1de968f059fb8dad89dae05330aa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/227802
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For 1.15.
From the test:
{"range":{"start":{"line":7,"character":13},"end":{...},"severity":3,"code":"leaks","source":"go compiler","message":"parameter z leaks to ~r2 with derefs=0","relatedInformation":[
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: flow: y = z:"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: from y = \u003cN\u003e (assign-pair)"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: flow: ~r1 = y:"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":4,"character":11},"end":{...}},"message":"inlineLoc"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: from y.b (dot of pointer)"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":4,"character":11},"end":{...}},"message":"inlineLoc"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: from \u0026y.b (address-of)"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":4,"character":9},"end":...}},"message":"inlineLoc"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: from ~r1 = \u003cN\u003e (assign-pair)"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":3},"end":...}},"message":"escflow: flow: ~r2 = ~r1:"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":3},"end":...}},"message":"escflow: from return (*int)(~r1) (return)"}]}
Change-Id: Idf02438801f63e487c35a928cf5a0b6d3cc48674
Reviewed-on: https://go-review.googlesource.com/c/go/+/206658
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
I've been experimenting with this, success is the wrong thing to report
even though it seems to log much less.
Change-Id: I7c25a45d2f41e82b6c8dd8b0a56ba848c63fb21a
Reviewed-on: https://go-review.googlesource.com/c/go/+/223298
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Missed as part of CL 221790. It isn't just * and / that can make NaNs.
Update #36400Fixes#38359
Change-Id: I3fa562f772fe03b510793a6dc0cf6189c0c3e652
Reviewed-on: https://go-review.googlesource.com/c/go/+/227860
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
If a Go symbol is cloned to external, we should preserve its Aux
symbols for FuncInfo, etc.. We already do this in
loader.FuncInfo, but not in FuncInfo.Funcdata. Do it in the
latter as well. In fact, since FuncInfo and Funcdata should use
the same set of auxs, just record the auxs and reuse.
Should fix PPC64 build.
Change-Id: Iab9020eaca15d98fe3bb41f50f0d5bdb4999e8c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/227848
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Previous PCALIGN support on ppc64x only accepted 8 and 16 byte
alignment since the default function alignment was 16. Now that
the function's alignment can be set to a larger value when needed,
PCALIGN can accept 32. When this happens then the function's
alignment will be changed to 32.
Test has been updated to recognized this new value.
Change-Id: If82c3cd50d7c686fcf8a9e819708b15660cdfa63
Reviewed-on: https://go-review.googlesource.com/c/go/+/227775
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Rework the linker's pcln phase to work with the new loader. As part of
this set of changes the handling of "go.file..." symbols has been
revised somewhat -- previously they were treated as always live in the
loader, and now we no longer do this.
The original plan had been to have the new implementation generate
nameless "inltree" symbols, however the plan now is to keep them
named for now and convert them to nameless in a subsequent patch.
Change-Id: If71c93ff1f146dbb63b6ee2546308acdc94b643c
Reviewed-on: https://go-review.googlesource.com/c/go/+/227759
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Will help with strongly typed rewrite rules.
Change-Id: Ifbf316a49f4081322b3b8f13bc962713437d9aba
Reviewed-on: https://go-review.googlesource.com/c/go/+/227785
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Introduce SetAddrPlus method for use with SymbolBuilder.
Change-Id: Ieb2986b2fc1675b7a3a71c84b7219b3d564ac122
Reviewed-on: https://go-review.googlesource.com/c/go/+/227757
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Expand the methods for the FuncInfo helper, to support reading the
contents of an object file FuncInfo aux symbol using the new style
(that is to say, incrementally and without allocating slices to hold
the various bits).
Change-Id: I953d72c4a53f98c840e6b25b08fd33dc4a833dd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227585
Reviewed-by: Cherry Zhang <cherryyz@google.com>
SubexpIndex returns the index of the first subexpression with the given name,
or -1 if there is no subexpression with that name.
Fixes#32420
Change-Id: Ie1f9d22d50fb84e18added80a9d9a9f6dca8ffc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/187919
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
There's no need for netpollWakeSig to use a uintptr type, a uint32 is enough.
Relevant CL: CL 212737
Change-Id: Ide24478b217a02bad62f7e000a9680c26a8c5366
Reviewed-on: https://go-review.googlesource.com/c/go/+/227798
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Right now the Aux and AuxInt fields of ssa.Values are typed as
interface{} and int64, respectively. Each rule that uses these values
must cast them to the type they actually are (*obj.LSym, or int32, or
ValAndOff, etc.), use them, and then cast them back to interface{} or
int64.
We know for each opcode what the types of the Aux and AuxInt fields
should be. So let's modify the rule generator to declare the types to
be what we know they should be, autoconverting to and from the generic
types for us. That way we can make the rules more type safe.
It's difficult to make a single CL for this, so I've coopted the "=>"
token to indicate a rule that is strongly typed. "->" rules are
processed as before. That will let us migrate a few rules at a time in
separate CLs. Hopefully we can reach a state where all rules are
strongly typed and we can drop the distinction.
This CL changes just a few rules to get a feel for what this
transition would look like.
I've decided not to put explicit types in the rules. I think it
makes the rules somewhat clearer, but definitely more verbose.
In particular, the passthrough rules that don't modify the fields
in question are verbose for no real reason.
Change-Id: I63a1b789ac5702e7caf7934cd49f784235d1d73d
Reviewed-on: https://go-review.googlesource.com/c/go/+/190197
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This changes the code generated for variable length shift
counts to use isel instead of instructions that set and
read the carry flag.
This reduces the generated code for shifts like this
by 1 instruction and avoids the use of instructions to
set and read the carry flag.
This sequence can be found in strconv with these results
on power9:
Atof64Decimal 71.6ns ± 0% 68.3ns ± 0% -4.61%
Atof64Float 95.3ns ± 0% 90.9ns ± 0% -4.62%
Atof64FloatExp 153ns ± 0% 149ns ± 0% -2.61%
Atof64Big 234ns ± 0% 232ns ± 0% -0.85%
Atof64RandomBits 348ns ± 0% 369ns ± 0% +6.03%
Atof64RandomFloats 262ns ± 0% 262ns ± 0% ~
Atof32Decimal 72.0ns ± 0% 68.2ns ± 0% -5.28%
Atof32Float 92.1ns ± 0% 87.1ns ± 0% -5.43%
Atof32FloatExp 159ns ± 0% 158ns ± 0% -0.63%
Atof32Random 194ns ± 0% 191ns ± 0% -1.55%
Some tests in codegen/shift.go are enabled to verify the
expected instructions are generated.
Change-Id: I968715d10ada405a8c46132bf19b8ed9b85796d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/227337
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is in prepration of removing the old loader.Reloc. This also
introduces a way of adding a slice of relocations more
efficiently (will be used in the next CL).
Change-Id: I3eaee7fb3a3e102a8670990f4a31c40d0b17b8c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/227761
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
They are no longer needed.
Also rewrite the test, as the old one no longer meaningful.
Change-Id: Id39ad6bb2a334cb6d61aa0a7c52837e0c3d62432
Reviewed-on: https://go-review.googlesource.com/c/go/+/227641
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Introduce field setters and use them on the writer side. Now we
are able to eliminate the old-style types.
Change-Id: I650d837328dc02f9be839d16a31812be86721b91
Reviewed-on: https://go-review.googlesource.com/c/go/+/227640
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Tweak the runtime's GDB python test to try to reduce flake failures.
Background: the intent of the testpoint in question is to make sure
that python-supported commands like "info goroutines" or "goroutine 1
backtrace" work properly. The Go code being run under the debugger as
part of the test is single-threaded, but the test is written assuming
that in addition to the primary goroutine there will be other
background goroutines available (owned by the runtime). The flakiness
seems to crop up the most when requesting a backtrace for one of these
background goroutines; the speculation is that if we catch a
runtime-owned goroutine in an odd state, this could interfere with the
test.
The change in this patch is to explicitly start an additional
goroutine from the main thread, so that when the debugger stops the
main thread we can be sure that there is some other non-main goroutine
in a known state.
This change authored by Josh Bleecher Snyder <josharian@gmail.com>.
Updates #24616.
Change-Id: I45682323d5898e5187c0adada7c5d117e92f403b
Reviewed-on: https://go-review.googlesource.com/c/go/+/226558
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Also set a deadline in TestCloseWrite so that we can more easily
determine which kind of connection is getting stuck on the
darwin-arm64-corellium builder (#34837).
Change-Id: I8ccacbf436e8e493fb2298a79b17e0af8fc6eb81
Reviewed-on: https://go-review.googlesource.com/c/go/+/227588
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For map with hint larger than BUCKETSIZE, makemap ignore allocated
bucket and allocate buckets itself. So do not allocate bucket in
this case, save us the cost of zeroing+assignment to the bucket.
name old time/op new time/op delta
NewEmptyMap-12 3.89ns ± 4% 3.88ns ± 2% ~ (p=0.939 n=19+20)
NewSmallMap-12 23.3ns ± 3% 23.1ns ± 2% ~ (p=0.307 n=18+17)
NewEmptyMapHintLessThan8-12 6.43ns ± 3% 6.31ns ± 2% -1.72% (p=0.000 n=19+18)
NewEmptyMapHintGreaterThan8-12 159ns ± 2% 150ns ± 1% -5.79% (p=0.000 n=20+18)
Benchmark run with commit ab7c174 reverted, see #38314.
Fixes#20184
Change-Id: Ic021f57454c3a0dd50601d73bbd77b8faf8d93b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/227458
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes the check for the reserved namespace prefix
"xml" to be case insensitive, so as to match all variants of:
(('X'|'x')('M'|'m')('L'|'l'))
as mandated by Section 2.3 of https://www.w3.org/TR/REC-xml/Fixes#35151.
Change-Id: Id5a98e5f9d69d3741dc16f567c4320f1ad0b3c70
Reviewed-on: https://go-review.googlesource.com/c/go/+/203417
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The previous change moved code around to create slicesym.
This change simplifies slicesym and its callsites
by accepting an int64 for lencap instead of a node,
and by removing all the calls to gdata.
It also stops modifying n,
which avoids the need to make a copy of it.
Passes toolstash-check.
Change-Id: I4d25454d11b4bb8941000244443e3c99eef4bdd0
Reviewed-on: https://go-review.googlesource.com/c/go/+/227550
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change mostly moves code around to unify it.
A subsequent change will simplify and improve slicesym.
Passes toolstash-check.
Change-Id: I84a877ea747febb2b571d4089ba6d905b51b27ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/227549
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Some runtime calls accept a slice, but only use ptr and len.
This change modifies most such routines to accept only ptr and len.
After this change, the only runtime calls that accept an unnecessary
cap arg are concatstrings and slicerunetostring.
Neither is particularly common, and both are complicated to modify.
Negligible compiler performance impact. Shrinks binaries a little.
There are only a few regressions; the one I investigated was
due to register allocation fluctuation.
Passes 'go test -race std cmd', modulo #38265 and #38266.
Wow, does that take a long time to run.
Updates #36890
file before after Δ %
compile 19655024 19655152 +128 +0.001%
cover 5244840 5236648 -8192 -0.156%
dist 3662376 3658280 -4096 -0.112%
link 6680056 6675960 -4096 -0.061%
pprof 14789844 14777556 -12288 -0.083%
test2json 2824744 2820648 -4096 -0.145%
trace 11647876 11639684 -8192 -0.070%
vet 8260472 8256376 -4096 -0.050%
total 115163736 115118808 -44928 -0.039%
Change-Id: Idb29fa6a81d6a82bfd3b65740b98cf3275ca0a78
Reviewed-on: https://go-review.googlesource.com/c/go/+/227163
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
