OTYPESW and ORANGE were manually creating locations and flows around
them, which are relatively low-level graph construction primitives.
This CL changes them to use holes like the rest of the code.
Also, introduce "later" as an abstraction for assignment flows that
don't happen right away, and which need to prevent expressions from
being marked as "transient" (e.g., in ODEFER and ORANGE).
There's no behavior change here, but this does reduce the number of
newLoc call sites, which should help with restoring -m=2 diagnostics.
Passes toolstash-check.
Updates #31489.
Change-Id: Ic03d4488cb5162afe8b00b12432d203027e8d7d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/196619
Reviewed-by: Cherry Zhang <cherryyz@google.com>
PPC64's ANDCC, ORCC, XORCC SSA ops produce a flags value, which
should not have register mask of an integer register.
Fixes#34468.
Change-Id: Ic762e423b20275fd9f8118dae7951c258d59738c
Reviewed-on: https://go-review.googlesource.com/c/go/+/196960
Reviewed-by: Keith Randall <khr@golang.org>
This is broken out from: CL 187117
This new symbol will be populated by the compiler and contain debug line
information that's currently generated in the linker. One might say it's
sad to create a new symbol, but this symbol will replace the isStmt
symbols.
Testing: Ran go build -toolexec 'toolstash -cmp'
Change-Id: If8f7ae4b43b7247076605b6429b7d03a1fd239c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/188238
Reviewed-by: Austin Clements <austin@google.com>
This fixes a regression introduced with CL 192937. That change
was intended to fix a problem in arm and arm64 but also added
code to change the behavior in ppc64 and ppc64le even though the
error never occurred there. The change to function sigFetchG
assumes that the register holding 'g' could be clobbered by
vdso code when in fact 'g' is in R30 and that is nonvolatile
in the 64-bit PowerPC ELF ABI so would not be clobbered in vdso code.
So if this happens somehow the path it takes is incorrect,
falling through to a call to badsignal which doesn't seem right.
This regression caused intermittent hangs on the builder dashboard
for ppc64, and can be reproduced consistently when running os/signal
TestStress on some ppc64 systems.
I mentioned this problem is issue #34391 because I thought it was
related to another problem described there.
Change-Id: I2ee3606de302bafe509d300077ce3b44b88571a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/196658
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I'm branching this off cl/187117, and will be reworking that diff stack.
Testing: I've run go build -toolexec 'toolstash -cmp'
Change-Id: I922a97d0f25d52ea70cd974008a063d4e7af34a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/188023
Reviewed-by: Austin Clements <austin@google.com>
Some nameservers alter the case of NS records they return, e.g.
ns2.google.COm. or ns2.google.coM. Change TestLookupGmailNS to account
for this possibility by comparing host names in lower case.
Fixes#34446
Change-Id: I6ccb5b87b42401e04c9b32cecb8b7b4267b654cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/196801
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Upgrade the thread sanitizer to handle mid-stack inlining correctly.
We can now return multiple stack frames for each pc that the thread sanitizer
gives us to symbolize.
To fix#33309, we still need to modify the tsan library with its portion
of this fix, rebuild the .syso files on all supported archs, and check
them into runtime/race.
Update #33309
Change-Id: I340013631ffc8428043ab7efe3a41b6bf5638eaf
Reviewed-on: https://go-review.googlesource.com/c/go/+/195781
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
First, renove unnecessary "// cond:" lines from the generated files.
This shaves off about ~7k lines.
Second, join "if cond { break }" statements via "||", which allows us to
deduplicate a large number of them. This shaves off another ~25k lines.
This change is not for readability or simplicity; but rather, to avoid
unnecessary verbosity that makes the generated files larger. All in all,
git reports that the generated files overall weigh ~200KiB less, or
about 2.7% less.
While at it, add a -trace flag to rulegen.
Updates #33644.
Change-Id: I3fac0290a6066070cc62400bf970a4ae0929470a
Reviewed-on: https://go-review.googlesource.com/c/go/+/196498
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently if type of public key is unsupported, error message is "only
RSA and ECDSA public keys supported". After adding Ed25519 this message
is no longer correct.
Moreover, it is superfluous because documentation for
MarshalPKIXPublicKey, CreateCertificateRequest and CreateCertificate
already lists supported public key types.
This CL removes unnecessary details from error message.
It also adds reporting the type of unsupported key, which helps
debugging cases when struct (instead of a pointer) to otherwise correct
public key is given.
Fixes#32640
Change-Id: I45e6e3d756b543688d850009b4da8a4023c05027
Reviewed-on: https://go-review.googlesource.com/c/go/+/196777
Reviewed-by: Filippo Valsorda <filippo@golang.org>
In (*netFD).accept, if initializing the *netFD associated with the
new connection fails, the listen FD is closed, rather than the FD
associated with the new connection. Close the correct FD instead.
Fixes#34392
Change-Id: I7bf3469d661e6d30cbd4b12f5f5fd330a81a541b
Reviewed-on: https://go-review.googlesource.com/c/go/+/196778
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
https://golang.org/cl/191257 significantly changed (and simplified)
the computation of interface method sets with embedded interfaces.
Specifically, when adding methods from an embedded interface, those
method objects (Func Objects) were cloned so that they could have a
different source position (the embedding position rather than the
original method position) for better error messages.
This causes problems for code that depends on the identity of method
objects that represent the same method, embedded or not.
This CL avoids the cloning. Instead, while computing the method set
of an interface, a position map is carried along that tracks
embedding positions. The map is not needed anymore after type-
checking.
Updates #34421.
Change-Id: I8ce188136c76fa70fba686711167db29a049f46d
Reviewed-on: https://go-review.googlesource.com/c/go/+/196561
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This clarifies meaning of "case folding" Unicode equality with more familiar "case insensitive" wording.
For case folding properties see ftp://ftp.unicode.org/Public/UNIDATA/CaseFolding.txt.
Fixes#33447
Change-Id: I6ee85ab398679bf2a0b7d18693985ff0979d6c5a
GitHub-Last-Rev: accc915933
GitHub-Pull-Request: golang/go#34434
Reviewed-on: https://go-review.googlesource.com/c/go/+/196717
Reviewed-by: Rob Pike <r@golang.org>
All spelling in source code is "fieldAlign", except this place, so change
"fieldalign" to use mixedCaps.
Change-Id: Icbd9b9d23d9b4f756174e9a3cc4b25776fd90def
GitHub-Last-Rev: 44a4fe140a
GitHub-Pull-Request: golang/go#34441
Reviewed-on: https://go-review.googlesource.com/c/go/+/196757
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
On modern 64bit CPUs a SHR, SHL or AND instruction take 1 cycle to execute.
A pair of shifts that operate on the same register will take 2 cycles
and needs to wait for the input register value to be available.
Large constants used to mask the high bits of a register with an AND
instruction can not be encoded as an immediate in the AND instruction
on amd64 and therefore need to be loaded into a register with a MOV
instruction.
However that MOV instruction is not dependent on the output register and
on many CPUs does not compete with the AND or shift instructions for
execution ports.
Using a pair of shifts to mask high bits instead of an AND to mask high
bits of a register has a shorter encoding and uses one less general
purpose register but is slower due to taking one clock cycle longer
if there is no register pressure that would make the AND variant need to
generate a spill.
For example the instructions emitted for (x & 1 << 63) before this CL are:
48c1ea3f SHRQ $0x3f, DX
48c1e23f SHLQ $0x3f, DX
after this CL the instructions are the same as GCC and LLVM use:
48b80000000000000080 MOVQ $0x8000000000000000, AX
4821d0 ANDQ DX, AX
Some platforms such as arm64 already have SSA optimization rules to fuse
two shift instructions back into an AND.
Removing the general rule to rewrite AND to SHR+SHL speeds up this benchmark:
var GlobalU uint
func BenchmarkAndHighBits(b *testing.B) {
x := uint(0)
for i := 0; i < b.N; i++ {
x &= 1 << 63
}
GlobalU = x
}
amd64/darwin on Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz:
name old time/op new time/op delta
AndHighBits-4 0.61ns ± 6% 0.42ns ± 6% -31.42% (p=0.000 n=25+25):
'go run run.go -all_codegen -v codegen' passes with following adjustments:
ARM64: The BFXIL pattern ((x << lc) >> rc | y & ac) needed adjustment
since ORshiftRL generation fusing '>> rc' and '|' interferes
with matching ((x << lc) >> rc) to generate UBFX. Previously
ORshiftLL was created first using the shifts generated for (y & ac).
S390X: Add rules for abs and copysign to match use of AND instead of SHIFTs.
Updates #33826
Updates #32781
Change-Id: I43227da76b625de03fbc51117162b23b9c678cdb
Reviewed-on: https://go-review.googlesource.com/c/go/+/194297
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
i32.eqz instructions don't appear unless needed in if conditions anymore
after CL 195204. I forgot to run the codegen tests while submitting the CL.
Thanks to @martisch for catching it.
Fixes#34442
Change-Id: I177b064b389be48e39d564849714d7a8839be13e
Reviewed-on: https://go-review.googlesource.com/c/go/+/196580
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Check for the next block and accordingly place the successor blocks.
This saves an additional jump instruction if the next block is any one
of the successor blocks.
While at it, inline the logic of goToBlock.
Reduces the size of pkg/js_wasm by 264 bytes.
Change-Id: I671ac4322e6edcb0d7e590dcca27e074268068d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/195204
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
Add support for assembling load, store and multiplication instructions.
Based on the riscv-go port.
Updates #27532
Change-Id: Ia7b6e60ae45416a82f240e7b7fc101a36ce18886
Reviewed-on: https://go-review.googlesource.com/c/go/+/195917
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In a position independent executable the data or BSS may be located
close to the end of memory. If it is placed closer than
rootBlockBytes, then the calculations in markrootBlock would overflow,
and the test that ensures that n is not larger than n0 would fail.
This would then cause scanblock to scan data that it shouldn't,
using an effectively random ptrmask, leading to program crashes.
No test because the only way to test it is to build a PIE and convince
the kernel to put the data section near the end of memory, and I don't
know how to do that. Or perhaps we could use a linker script, but that
is painful.
The new code is algebraically identical to the original code, but
avoids the potential overflow of b+rootBlockBytes.
Change-Id: Ieb4e5465174bb762b063d2491caeaa745017345e
Reviewed-on: https://go-review.googlesource.com/c/go/+/195717
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
A precondition of modload.PackageBuildInfo is that its path and deps
arguments correspond to paths that have been loaded successfully with
modload.ImportPaths or one of the Load functions. load.Package.load
should not call PackageBuildInfo if there were any errors resolving
imports.
Fixes#34393
Change-Id: I107514f1c535885330ff266c85d3981b71b31c2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/196520
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Before this change, wasm only used float variables with a size of 64 bit
and applied rounding to 32 bit precision where necessary. This change
adds proper 32 bit float variables.
Reduces the size of pkg/js_wasm by 254 bytes.
Change-Id: Ieabe846a8cb283d66def3cdf11e2523b3b31f345
Reviewed-on: https://go-review.googlesource.com/c/go/+/195117
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This consolidates the construction of 'ambiguous import' errors to a
single location, ensuring consistency, and lays the groundwork for
automatic resolution in the future.
While we're at it, change "found" to "found package" to try to make
the cause of the error clearer.
Updates #32128
Updates #27899
Change-Id: I14a93593320e5c60d20b0eb686d0d5355763c30c
Reviewed-on: https://go-review.googlesource.com/c/go/+/196298
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This test is failing in the builders due to the deployed versions of
gccgo not supporting module mode. However, the bug reproduced in
GOPATH mode too, so that mode should be fine for a regression test.
Updates #34358
Change-Id: I954132a96849e80e8783d4de10389fcab7b14af2
Reviewed-on: https://go-review.googlesource.com/c/go/+/196518
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Couple of changes to the linker's dwarf test, including:
- add some code to the DWARF tests inlining coverage to verify the
call_file attribute attached to inlined routine DIEs. If function
main.F is inlined into function main.G, we want to see that the
call_file attribute in the inlined routine DIE for main.F is the
same file as that reported for main.G.
- fix a glitch with the way the DW_AT_decl_file attribute was
being checked. The previous code relied on hard-coded indices
into the line table files table, which is very brittle (since
there is no requirement that files be ordered in any specific
way). Instead, add machinery to look up the actual file string
via the line table reader.
Change-Id: I44e71c69b6e676238cf4b805e7170de17b50939f
Reviewed-on: https://go-review.googlesource.com/c/go/+/196517
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The mime and strconv packages already have a const with this name & value.
Change-Id: Ibd7837f854ac8ec3f57943a9d1db07f4cf6db858
GitHub-Last-Rev: 775cdce3b7
GitHub-Pull-Request: golang/go#34389
Reviewed-on: https://go-review.googlesource.com/c/go/+/196437
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
modload.MinReqs was passing modload.buildList to mvs.Reqs explicitly,
apparently as an optimization. However, we do not always have the
invariant that modload.buildList is complete: in particular, 'go mod
tidy' begins by reducing modload.buildList to only the set of modules
that provide packages to the build, which may be substantially smaller
than the final build list.
Other operations, such as 'go mod graph', do not load the entire
import graph, and therefore call Reqs with the unreduced build list.
Since Reqs retains modules according to a post-order traversal of the
list, an incomplete list may produce a different traversal order — and
therefore a different minimal solution, when multiple minimal
solutions exist. That caused 'go mod tidy' to produce different output
from other 'go' subcommands when certain patterns of dependencies are
present.
Since passing in the build list is only an optimization anyway, remove
the parameter and recompute the actual (complete) list at the
beginning of mvs.Reqs itself. That way, it is guaranteed to be
complete and in canonical order.
Fixes#34086
Change-Id: I3101bb81a1853c4a5e773010da3e44d2d90a570c
Reviewed-on: https://go-review.googlesource.com/c/go/+/193397
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TestAmbientCapsUserns also needs to be skipped, e.g. in case the test is
run inside a chroot.
Updates #34015
Change-Id: I53913432fe9408217edfe64619adbfd911a51a7a
Reviewed-on: https://go-review.googlesource.com/c/go/+/196500
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Windows type PBOOL is a pointer to a 4 byte value, where 0 means false
and not-0 means true. That means we should use uint32 here, not bool,
since Go bools can be 1 byte. Since a *bool is never a "real" valid
Windows type, converting on both in and out is probably sufficient,
since *bool shouldn't ever be used as something with significance for
its particular address.
Updates: #34364
Change-Id: I4c1b91cd9a39d91e23dae6f894b9a49f7fba2c0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/196122
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Currently there is no way for go doc to output a clean
one-line symbol representation of types, functions, vars
and consts without documentation lines or other text lines
added.
For example `go doc fmt` has a huge introduction so if you
pass that to grep or fzf to search a symbol let say scan
`go doc fmt | grep scan` you get way to many false
positives.
Added a `-short` flag to be able to do
`go doc -short fmt | grep scan` instead which will result in
just the symbols you are looking for.
func Fscan(r io.Reader, a ...interface{}) (n int, err error)
func Fscanf(r io.Reader, format string, a ...interface{}) (n int, err error)
func Fscanln(r io.Reader, a ...interface{}) (n int, err error)
func Sscan(str string, a ...interface{}) (n int, err error)
func Sscanf(str string, format string, a ...interface{}) (n int, err error)
func Sscanln(str string, a ...interface{}) (n int, err error)
Fixes#32597
Change-Id: I77a73838adc512c8d1490f5a82075de6b0462a31
Reviewed-on: https://go-review.googlesource.com/c/go/+/184017
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
This was in response to a post-merge review comment in
golang.org/cl/185537
Change-Id: I866b3882c8e83bf1fef60115cff5d1c6a9863f09
Reviewed-on: https://go-review.googlesource.com/c/go/+/186319
Reviewed-by: Andrew Bonventre <andybons@golang.org>
When walking filesystem paths to locate packages, we normally prune
out subdirectories with names beginning with ".", "_", or equal to
"testdata". However, we should not prune out such a directory if it is
at or above the module root, since its name is not part of the package
path.
Fixes#28481
Updates #27852
Change-Id: Ice82b1f908afaab50f5592f6c38ca6a0fe911edf
Reviewed-on: https://go-review.googlesource.com/c/go/+/196297
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current msanwrite() segfaults during libpreinit
when built with -msan on arm64. The cause is msancall()
in runtime/msan_arm64.s called by msanwrite() assumes
that it is always called with a valid g, leading to a
segfult.
This CL adds a check for nil g in msancall().
Fixes#34338
Change-Id: If4ad7e37556cd1d99346c1a7b4852651d1e4e4aa
Reviewed-on: https://go-review.googlesource.com/c/go/+/196157
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Since I first started on this CL, most of the methods have had examples
added by other folks, so this is now one new example, and additions to
two existing examples for extra clarity.
The issue has a comment about not necessarily having examples for all
methods, but I recall finding this package pretty confusing when I first
used it, and having concrete examples would have really helped me
navigate all the different options. There are more
String methods with examples now, but I think seeing how the byte-slice
methods work could also be helpful to explain the differences.
Updates #21450
Change-Id: I27b4eeb634fb8ab59f791c0961cce79a67889826
Reviewed-on: https://go-review.googlesource.com/c/go/+/120145
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, if you call various reflect methods you might get a panic with a
message like, "reflect: Field of non-struct type". Sometimes it's easy to
grok what's going on, but other times you need to laboriously go perform
reflect.ValueOf(myType).Kind().
This CL just adds that detail to the error message, saving debuggers the
extra step and making the error message more clear.
Change-Id: I7e0c211a3001e6b217b828cbcf50518080b5cb1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/183097
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
'go tool trace' pointed at an obvious inefficiency; roughly the first
fifth of the program's life was CPU-heavy and making use of only one CPU
core at a time.
This was due to genOp being run before genLower. We did make genLower
use goroutines to parallelize the work between architectures, but we
didn't make genOp run in parallel too.
Do that. To avoid having two layers of goroutines, simply fire off all
goroutines from the main function, and inline genLower, since it now
becomes just two lines of code.
Overall, this shaves another ~300ms from 'go run *.go' on my laptop.
name old time/op new time/op delta
Rulegen 2.04s ± 2% 1.76s ± 2% -13.93% (p=0.008 n=5+5)
name old user-time/op new user-time/op delta
Rulegen 9.04s ± 1% 9.25s ± 1% +2.37% (p=0.008 n=5+5)
name old sys-time/op new sys-time/op delta
Rulegen 235ms ±14% 245ms ±16% ~ (p=0.690 n=5+5)
name old peak-RSS-bytes new peak-RSS-bytes delta
Rulegen 179MB ± 1% 190MB ± 2% +6.21% (p=0.008 n=5+5)
Change-Id: I057e074c592afe06c831b03ca447fba12005e6f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/196177
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, the line table reader keeps the file name table internal.
However, there are various attributes like AttrDeclFile and
AttrCallFile whose value is an index into this table. Hence, in order
to interpret these attributes, we need access to the file name table.
This CL adds a method to LineReader that exposes the file table of the
current compilation unit in order to allow consumers to interpret
attributes that index into this table.
Change-Id: I6b64b815f23b3b0695036ddabe1a67c3954867dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/192699
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, dwarf.Reader exposes the current compilation unit's address
size, but doesn't expose its byte order. Both are important for
decoding many attributes. For example, location descriptions include
addresses that are encoded in native form for the CU.
This CL exposes the byte order of the compilation unit in the same way
we already expose its address size, which makes it possible to decode
attributes containing native addresses.
Change-Id: I92f156818fe92b049d1dfc1613816bb1689cfadf
Reviewed-on: https://go-review.googlesource.com/c/go/+/192698
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 140357 caused HTTP/2 connections to be put in the idle pool, but
failed to properly guard the trace.GotConn call in getConn. dialConn
returns a minimal persistConn with conn == nil for HTTP/2 connections.
This persistConn was then returned from queueForIdleConn and caused the
httptrace.GotConnInfo passed into GotConn to have a nil Conn field.
HTTP/2 connections call GotConn themselves so leave it for HTTP/2 to call
GotConn as is done directly below.
Fixes#34282
Change-Id: If54bfaf6edb14f5391463f908efbef5bb8a5d78e
GitHub-Last-Rev: 2b7d66a1ce
GitHub-Pull-Request: golang/go#34283
Reviewed-on: https://go-review.googlesource.com/c/go/+/195237
Reviewed-by: Michael Fraenkel <michael.fraenkel@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fix bug in previous CL 171768 -- with Go 1.13 the proper entry point
to call is runtime.setmodinfo, not runtime..z2fdebug.setmodinfo (this
changed when we moved from 1.12). [ Unclear why trybots and runs of
all.bash didn't catch this, but hand testing made it apparent. ]
Updates #30344.
Change-Id: I91f47bd0c279ad2d84875051be582818b13735b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/196237
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I noticed lots of trailing whitespace in one of cmd/trace's HTML files.
While at it, remove a few others from still-maintained files. Leave old
documents alone, such as doc/devel/weekly.html.
Change-Id: I7de7bbb6dd3fe6403bbb1f1178a8d3640c1e537b
Reviewed-on: https://go-review.googlesource.com/c/go/+/196178
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
RELNOTE=This change adds an underscore to all Go symbols in darwin, and
the behavior might be confusing to users of tools like "nm", etc.
Fixes#33808
Change-Id: I1849e6618c81215cb9bfa62b678f6f389cd009d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/196217
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Use a different recipe for capturing debug modinfo if we're compiling
with the gccgo toolchain, to avoid applying a go:linkname directive to
a variable (not supported by gccgo).
Fixes#30344.
Change-Id: I9ce3d42c3bbb809fd68b140f56f9bbe3406c351b
Reviewed-on: https://go-review.googlesource.com/c/go/+/171768
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
