Named.SetTParams sets the type parameters for a named type.
Named.Orig returns the original generic type an instantiated
type is derived from. Added a new field orig for that purpose
and renamed the already existing orig field to fromRHS.
Finally, updated various comments.
Change-Id: Ic9d173e42740422d195713d8bdc62a54dc8c5f54
Reviewed-on: https://go-review.googlesource.com/c/go/+/309832
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Now that go/ast changes have been guarded behind the typeparams build
tag, we no longer have coverage for tests involving generic code.
Add a new testing step to cmd/dist to run go/... and cmd/gofmt tests
using -tags=typeparams.
Comment out parser object resolution assertions that currently fail, and
which will be fixed by CL 304456.
Fixes#44933
Change-Id: I481dd4246a016f410307865b6c6c2bb3c8e6e3bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/310071
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
My rebase of https://golang.org/cl/300649 before submitting broke the
build (and tests) when using the typeparams build constraint. In a
subsequent CL I add test coverage back to cmd/dist.
This time, I've tested by running:
- go test -tags=typeparams go/...
- go test -tags=typeparams cmd/gofmt
All tests pass except for the new TestResolution/typeparams.go2, which I
will fix in a follow-up CL.
For #44933
Change-Id: I439d387841604cf43a90e2ce41dbe6bbbdb0306d
Reviewed-on: https://go-review.googlesource.com/c/go/+/310070
Trust: Robert Findley <rfindley@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixes this failure:
go test cmd/compile/internal/ssa -run TestStmtLines -v
=== RUN TestStmtLines
stmtlines_test.go:115: Saw too many (amd64, > 1%) lines without
statement marks, total=88263, nostmt=1930
('-run TestStmtLines -v' lists failing lines)
The failure has two causes.
One is that the first-line adjuster in code generation was relocating
"first lines" to instructions that would either not have any code generated,
or would have the statment marker removed by a different believed-good heuristic.
The other was that statement boundaries were getting attached to register
values (that with the old ABI were loads from the stack, hence real instructions).
The register values disappear at code generation.
The fixes are to (1) note that certain instructions are not good choices for
"first value" and skip them, and (2) in an expandCalls post-pass, look for
register valued instructions and under appropriate conditions move their
statement marker to a compatible use.
Also updates TestStmtLines to always log the score, for easier comparison of
minor compiler changes.
Updates #40724.
Change-Id: I485573ce900e292d7c44574adb7629cdb4695c3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/309649
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The compiler currently emits an "*.args_stackmap" symbol for all
bodyless functions, so that asm functions will have the proper stack
map. At the moment the code in the compiler that emits args_stackmap
assumes ABI0; to avoid misleading stackmaps, turn off args_stackmap
generation for non-ABI0 asm functions.
Updates #40724.
Change-Id: Ia5e3528d56da5fb107e799bd658e52496ba4a331
Reviewed-on: https://go-review.googlesource.com/c/go/+/309790
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Change the assembler to enforce the requirement that ABIInternal
functions need to be NOSPLIT. At the moment all of the assembly
routines in the runtime that are defined as ABIInternal also
happen to be NOSPLIT, but this CL makes it mandatory.
Updates #40724.
Change-Id: Ief80d22de1782edb44b798fcde9aab8a93548722
Reviewed-on: https://go-review.googlesource.com/c/go/+/309789
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When callMethod calls the underlying method, after reflectcall
it gets the result registers in "Ints" slots but not in "Ptrs"
slots. If the GC runs at this point, it may lose track of those
pointers and free the memory they point to.
To make sure the GC sees the pointer results, copy "Ints" to
"Ptrs", and keep them alive until we return to the caller.
This fixes test/fixedbugs/issue27695.go with register ABI.
Change-Id: I4092c91bcbd6954683740a12d91d689900446875
Reviewed-on: https://go-review.googlesource.com/c/go/+/309909
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The 'go mod tidy' hint was truncated due to a typo in CL 293689,
and that particular case was not covered by any existing test.
Updates #36460
Updates #40775
Change-Id: Ib6fa872a9dfdafc4e9a112e8add2ff5aecd2dbd0
Reviewed-on: https://go-review.googlesource.com/c/go/+/310089
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This makes it clearer that i and hbits advance together.
As a bonus, it generates slightly better code.
Change-Id: I24d51102535c39f962a59c1a4a7c5c894339aa18
Reviewed-on: https://go-review.googlesource.com/c/go/+/309569
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
For #44167.
Change-Id: Ie3cf8d2960c843a782ec85426fa73c279adaed64
Reviewed-on: https://go-review.googlesource.com/c/go/+/306605
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
For #44167.
Change-Id: I15817006f1870d6237cd06dabad988da3f23a6d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/306604
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
This change moves next_gc and last_next_gc into gcControllerState under
the names heapGoal and lastHeapGoal respectively. These are
fundamentally GC pacer related values, and so it makes sense for them to
live here.
Partially generated by
rf '
ex . {
memstats.next_gc -> gcController.heapGoal
memstats.last_next_gc -> gcController.lastHeapGoal
}
'
except for updates to comments and gcControllerState methods, where
they're accessed through the receiver, and trace-related renames of
NextGC -> HeapGoal, while we're here.
For #44167.
Change-Id: I1e871ad78a57b01be8d9f71bd662530c84853bed
Reviewed-on: https://go-review.googlesource.com/c/go/+/306603
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
This patch provides changes according to Austin's TODO. It just moves
calculation of base indexes of each root type from markroot function
to gcMarkRootPrepare.
Change-Id: Ib231de34e7f81e922762fc3ee2b1830921c0c7cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/279461
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
The raw fds are successively wrapped using os.NewFile and will be closed
by (*os.File).Close. Avoids a double close, in the worst case closing an
unrelated fd.
Change-Id: I86aabe5ed865eff43d264ddae1fb07c935868e97
Reviewed-on: https://go-review.googlesource.com/c/go/+/309353
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For OMETHEXPR, the Name in the Selection needs to be properly
linked up to the method declaration. Use the same code we
already have for ODOTMETH and OCALLPART to do that.
Fixes#45503
Change-Id: I7d6f886d606bae6faad8c104f50c177f871d41c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/309831
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
This change breaks out the computations done by setGCPercent into
a method on gcControllerState for easier testing later. It leaves behind
the global implementation details.
For #44167.
Change-Id: I3b0cf1475b032fcd4ebbd01cf4e80de0b55ce7b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/306602
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Now that gcControllerState contains almost all of the pacer state,
create an initializer for it instead of haphazardly setting some fields.
For #44167.
Change-Id: I4ce1d5dd82003cb7c263fa46697851bb22a32544
Reviewed-on: https://go-review.googlesource.com/c/go/+/306601
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
These variables are core to the pacer, and will be need to be non-global
for testing later.
Partially generated via
rf '
ex . {
gcPercent -> gcController.gcPercent
heapMinimum -> gcController.heapMinimum
}
'
The only exception to this generation is usage of these variables
in gcControllerState methods.
For #44167.
Change-Id: I8b620b3061114f3a3c4b65006f715fd977b180a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/306600
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
gcSetTriggerRatio's purpose is to set a bunch of downstream values when
we choose to commit to a new trigger ratio computed by the gcController.
Now that almost all the inputs it uses to compute the downstream values
are in gcControllerState anyway, make it a method of gcControllerState.
For #44167.
Change-Id: I1b7ea709e8378566f812ae3450ab169d7fb66aea
Reviewed-on: https://go-review.googlesource.com/c/go/+/306599
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
For the new export/import of node types, we were just missing setting
the types of the closure variables (which have the same types as the
captured variables) and the OCLOSURE node itself (which has the same
type as the Func node).
Re-enabled inlining of functions with closures.
Change-Id: I687149b061f3ffeec3244ff02dc6e946659077a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/308974
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This avoids a dependency on a *Checker when we create type parameters
outside the type checker proper, e.g. in an importer. There may be
better solutions but this does the trick for now.
Change-Id: Icf22c934970cb04c88c2729555ae6a79ef5a2245
Reviewed-on: https://go-review.googlesource.com/c/go/+/309830
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
tests that run commands should log their actions in a
shell-pasteable way.
Change-Id: Ifeee88397047ef5a76925c5f30c213e83e535038
Reviewed-on: https://go-review.googlesource.com/c/go/+/309770
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change moves certain important but internal-only GC statistics from
memstats into gcController. These statistics are mainly used in pacing
the GC, so it makes sense to keep them in the pacer's state.
This CL was mostly generated via
rf '
ex . {
memstats.gc_trigger -> gcController.trigger
memstats.triggerRatio -> gcController.triggerRatio
memstats.heap_marked -> gcController.heapMarked
memstats.heap_live -> gcController.heapLive
memstats.heap_scan -> gcController.heapScan
}
'
except for a few special cases, like updating names in comments and when
these fields are used within gcControllerState methods (at which point
they're accessed through the reciever).
For #44167.
Change-Id: I6bd1602585aeeb80818ded24c07d8e6fec992b93
Reviewed-on: https://go-review.googlesource.com/c/go/+/306598
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
As we are taking its address, always zero it. In many cases the
temporary will be optimized out. But in case it does not (e.g. -N,
-race), this ensures it has the right liveness information.
May fix the noopt builder.
Change-Id: I3d5d617c276d2a1a1aaebff813b4cd60bc691592
Reviewed-on: https://go-review.googlesource.com/c/go/+/309771
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This fixes the build crash for
GOEXPERIMENT=regabi,regabiargs GOOS=windows go build syscall
Updates #40724.
Change-Id: I4400f6ff2e83e7e7e93ad5e58c6063b327532504
Reviewed-on: https://go-review.googlesource.com/c/go/+/309110
Trust: David Chase <drchase@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL changes our approach to guarding type parameter functionality
and API. Previously, we guarded type parameter functionality with the
parser.parseTypeParams parser mode, and were in the process of hiding
the type parameter API behind the go1.18 build constraint.
These mechanisms had several limitations:
+ Requiring the parser.parseTypeParams mode to be set meant that
existing tooling would have to opt-in to type parameters in all
places where it parses Go files.
+ The parseTypeParams mode value had to be copied in several places.
+ go1.18 is not specific to typeparams, making it difficult to set up
the builders to run typeparams tests.
This CL addresses the above limitations, and completes the task of
hiding the AST API, by switching to a new 'typeparams' build constraint
and adding a new go/internal/typeparams helper package.
The typeparams build constraint is used to conditionally compile the new
AST changes. The typeparams package provides utilities for accessing and
writing the new AST data, so that we don't have to fragment our parser
or type checker logic across build constraints. The typeparams.Enabled
const is used to guard tests that require type parameter support.
The parseTypeParams parser mode is gone, replaced by a new
typeparams.DisableParsing mode with the opposite sense. Now, type
parameters are only parsed if go/parser is compiled with the typeparams
build constraint set AND typeparams.DisableParsing not set. This new
parser mode allows opting out of type parameter parsing for tests.
How exactly to run tests on builders is left to a follow-up CL.
Updates #44933
Change-Id: I3091e42a2e5e2f23e8b2ae584f415a784b9fbd65
Reviewed-on: https://go-review.googlesource.com/c/go/+/300649
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Generated with:
rf 'mv gcpercent gcPercent'
rf 'mv readgogc readGOGC'
rf 'mv heapminimum heapMinimum'
After this, comments referencing these symbols were updated via a simple
sed command.
For #44167.
Change-Id: I6bb01597c2130686c01f967d0f106b06860ad2db
Reviewed-on: https://go-review.googlesource.com/c/go/+/306597
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
This change breaks out the GC pacer into its own file so that it'll be
easier to see the full implementation and change it. It also suggests an
obvious place to put tests (mgcpacer_test.go).
This includes all of gcControllerState, gcSetTriggerRatio, anything
related to GOGC, and all related globals and constants.
This is almost a clean move, except that globals and constants are
formatted into blocks instead of having a separate "var" declaration for
each one.
For #44167.
Change-Id: I85aa84ce85c6cfbe0b33e8a3c91cbe9dc41de8cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/306596
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Following CL 309029, this CL does the same thing for map
functions (mapaccess, mapassign, mapdelete).
For simplicity, always wrap "defer delete(m, k)". With
regabidefers enabled, this call is wrapped in a closure and the
rewriting happens automatically. Without regabidefers, it may not
be wrapped for certain key types, and then we'd need special
handling of the delete (because earlier the order pass does not
handle it). And we will turn on defer wrapping by default anyway.
Change-Id: I30663b1aa8e1d6f98e1fb81bf8c0c0ce607ab80b
Reviewed-on: https://go-review.googlesource.com/c/go/+/309510
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This function is no longer used.
Eliminating this actually fixes several problems:
- It made assumptions about what registers memclrNoHeapPointers would
preserve. Besides being an abstraction violation and lurking
maintenance issue, this actively became a problem for regabi because
the call to memclrNoHeapPointers now happens through an ABI wrapper,
which is generated by the compiler and hence we can't easily control
what registers it clobbers.
- The amd64 implementation (at least), does not interact with the host
ABI correctly. Notably, it doesn't save many of the registers that
are callee-save in the host ABI but caller-save in the Go ABI.
- It interacts strangely with the NOSPLIT checker because it allocates
an entire M and G on its stack. It worked around this on arm64, and
happened to do things the NOSPLIT checker couldn't track on 386 and
amd64, and happened to be *4 bytes* below the limit on arm (so any
addition to the m or g structs would cause a NOSPLIT failure). See
CL 309031 for a more complete explanation.
Fixes#45530.
Updates #40724.
Change-Id: Ic70d4d7e1c17f1d796575b3377b8529449e93576
Reviewed-on: https://go-review.googlesource.com/c/go/+/309634
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
This replaces the externalthreadhandler-based implementation of
profileloop with one that uses newm to start a new thread. This is a
step toward eliminating externalthreadhandler.
For #45530.
Change-Id: Id8e5540423fe2d2004024b649afec6998f77b092
Reviewed-on: https://go-review.googlesource.com/c/go/+/309633
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
This replaces the externalthreadhandler-based implementation of
ctrlhandler with one based on compileCallback. This is a step toward
eliminating externalthreadhandler.
For #45530.
Change-Id: I2de2f2f37777af292db67ccf8057b7566aab81f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/309632
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Updates #45402
Change-Id: I296f8c676c68ed1e10b6ad1a17b5b23d2c395252
Reviewed-on: https://go-review.googlesource.com/c/go/+/309355
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Change-Id: Idce4eec2a4698a94aa7b40590dffb6bf9bd45342
Reviewed-on: https://go-review.googlesource.com/c/go/+/309571
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Currently, Go functions exported to cgo have some confusion around
ABIs that leads to crashes. The cmd/cgo-generated C code references an
exported Go wrapper function (which calls the underlying exported user
function). The linker resolves this reference to the ABI0 entry-point
to that Go wrapper function because all host object references are
currently assumed to be to version 0 of a symbol. This gets passed via
crosscall2 and winds its way to cgocallbackg1, which puts this ABI0
entry-point into a function value and calls it. Unfortunately,
function values always use the ABIInternal calling convention, so
calling this ABI0 entry-point goes poorly.
Fix this by threading definition ABIs through the cgo export mechanism
so the linker can resolve host object references (which have no
concept of multiple ABIs) to the correct Go symbol. This involves a
few pieces:
- The compiler extends the cgo_export_{static,dynamic} directives that
get passed on to the linker with symbol definition ABIs.
- The linker parses the ABIs in the cgo_export_{static,dynamic}
directives to look up the right symbol to apply export attributes to
and put in the dynexp list.
- For internal linking, the linker's Loader structure tracks the right
symbol (in particular the right ABI) to resolve host object
references to, and we use this in all of the host object loaders.
- For external linking, we mangle only the non-ABIInternal symbols
now, so the external linker is able to resolve the correct reference
from host objects to Go symbols.
Updates #40724.
Change-Id: I70a0b1610596768c3f473745fa1a3e630afbf1a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/309341
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, setCgoAttr populates the cgo_export_{static,dynamic} maps
with symbol names of exported symbols, which are then re-looked-up by
deadcode and setupdynexp, which in turn puts the re-looked-up symbols
in ctxt.dynexp. setCgoAttr already looked up the Syms, so simplify all
of this by making setCgoAttr populate ctxt.dynexp directly and
eliminating the cgo_export_{static,dynamic} maps. Recording Syms
directly also sets us up to use correct symbol versions for these
exports, rather than just assuming version 0 for all lookups.
Since setupdynexp doesn't really do any "setting up" of dynexp any
more with this change, we fold the remaining logic from setupdynexp
directly into addexport, where it has better context anyway. This also
eliminates a sorting step, since we no longer do a non-deterministic
map iteration to build the dynexp slice.
For #40724.
Change-Id: I3e1a65165268da8c2bf50d7485f2624133433260
Reviewed-on: https://go-review.googlesource.com/c/go/+/309340
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, both loadcgo and setCgoAttr do some processing of
cgo_export_static and cgo_export_dynamic cgo directives, which means
they both have to parse them. There's no reason to do this in loadcgo,
so move all directive processing to setCgoAttr.
For #40724.
Change-Id: Icb3cdf7ef3517e866dd220e40a5f5dec7fd47e2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/309339
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
setCgoAttr takes a lookup function, but there's only a single call and
setCgoAttr already has access to the lookup function passed at that
call. Simplify setCgoAttr by eliminating the lookup parameter and
calling the lookup function directly.
For #40724.
Change-Id: Ib27c0fa2b88c387e30423365f7757e3ba02cf7d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/309338
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This took me a while to figure out. Save the next person some trouble.
Change-Id: Ifab2d426f67c21b08ef225c79125805a9008e578
Reviewed-on: https://go-review.googlesource.com/c/go/+/309336
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Fixes#45534
Change-Id: I9855607e845951f26ab85cb179ec6dea40d92156
Reviewed-on: https://go-review.googlesource.com/c/go/+/309574
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Both OpArgXXXReg and LoweredGetClosurePtr must come very early,
because they carry registers that are technically live on entry.
But no need to impose ordering requirement between them.
Change-Id: Iee1db6239a75e5b381e0ad25ba5503169333217b
Reviewed-on: https://go-review.googlesource.com/c/go/+/309629
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
When using the GCC thread sanitizer, it links in additional
code which uses TLS, which causes us to exceed the range of
the 16 bit TLS relocation used by statically compiled go
code.
Rewrite objabi.R_POWER_TLS_LE to handle 32b offsets when
linking internally or externally into an ELF binary. The
elf relocation translation is changed to generate a pair
of R_PPC64_TPREL16_HA/LO relocations instead of a single
R_PPC64_TPREL16.
Likewise, updating the above exposed some behavioral differences
in gnu ld which can rewrite TLS sequences. It expects the
sequence to generate a valid TLS address, not offset. This was
exposed when compiling PIC code. The proper fix is to generate
the full TLS address in the destination register of the
"MOVD tlsaddr, $Rx" pseudo-op. This removes the need to insert
special objabi.R_POWER_TLS relocations elsewhere.
Unfortunately, XCOFF (used by aix) doesn't appear to support 32
bit offsets, so we rewrite this back into a 16b relocation when
externally linking a static binary.
Fixes#45040
Change-Id: I1ee9afd0b427cd79888032aa1f60d3e265073e1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/302209
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
The object representing a module directive may have a "Deprecated"
field but not a "Version" field. Other objects representing module
versions have "Path" and "Version" fields but not "Deprecated".
For #40357
Change-Id: Iad8063dfa6f7ceea22981a8a8f99e65fa3b7ffa0
Reviewed-on: https://go-review.googlesource.com/c/go/+/309337
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
