The exact same test case covered by this file is also in
fixedbugs/bug121.go. No need for duplication.
Also, the actual syntax error tested (multiple method names
with a single signature) is an unlikely syntax error, and
only here for historical reasons (in the very beginning, this
was actually possible to write). Now, virtually nobody is making
this mistake.
Change-Id: I9d68e0aee2a63025f44e6338647f8250ecc3077a
Reviewed-on: https://go-review.googlesource.com/c/go/+/307789
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This fixes a compile crash for
GOEXPERIMENT=regabi,regabiargs go test -c go/constant
Updates #40724.
Change-Id: I238cef436e045647815326fc8fdb025c30ba1f5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/307309
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Update references missed in CL 263142.
For #41190
Change-Id: I778760a6a69bd0440fec0848bdef539c9ccb4ee1
GitHub-Last-Rev: dda42b09ff
GitHub-Pull-Request: golang/go#42874
Reviewed-on: https://go-review.googlesource.com/c/go/+/273946
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Zhang <cherryyz@google.com>
Leftover values that have been replaced can cause problems in later
passes (within expandCalls). For example, a struct select that
itself yields a struct will have a problematic rewrite, if the chance
is presented.
Updates #40724.
Change-Id: I1b445c47c301c3705f7fc0a9d39f1f5c84f4e190
Reviewed-on: https://go-review.googlesource.com/c/go/+/306869
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
The math to invert the input index was wrong.
Fixes#45323
Change-Id: I7c68cac280e8f01a9c806ecb0f195f169267437e
Reviewed-on: https://go-review.googlesource.com/c/go/+/306431
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: fannie zhang <Fannie.Zhang@arm.com>
Reviewed-by: David Chase <drchase@google.com>
In CL 305672 we preserve the pointer type of a store by just not
decomposing it. But this can be problematic when the source of
the store is a direct interface aggregate type (e.g.
struct { x map[int]int }.
In this CL we take a different approach: we preserve the store
type when generating the new store, but also decompose the source.
Fixes#45344.
Change-Id: If5dd496458dee95aa649c6d106b96a6cdcf3e60d
Reviewed-on: https://go-review.googlesource.com/c/go/+/306669
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Includes test.
Long term, need to make the offending code be more in terms
of official types package offsets, instead of duplicating that
logic.
For #40724.
Change-Id: Id33a153f10aed3289cc48d1f99a8e0f6ece9474d
Reviewed-on: https://go-review.googlesource.com/c/go/+/306469
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For in-register arguments, it must have only a single copy of it
present in the function. If there are multiple copies, it confuses
the register allocator, as they are in the same register.
Change-Id: I55cb06746f08aa7c9168026d0f411bce0a9f93f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/306330
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
During substitution of the function type during stenciling, we must set
the Name nodes of the param/result fields of the func type. We get those
name nodes from the substituted Dcl nodes of the PPARAMS and PPARAMOUTs.
But we must check that the names match with the Dcl nodes, so that we
skip any param fields that correspond to unnamed (in) parameters.
Added a few tests to typelist.go by removing a variety of unneeded
function parameter names.
Change-Id: If786961b64549da6f18eeeb5060ea58fab874eb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/305912
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
In expand_calls, when rewriting OpArg to OpArgIntReg/OpArgFloatReg,
avoid generating duplicates. Otherwise it will confuse the
register allocator: it would think the second occurance clobbers
the first's register, causing it to generate copies, which may
clobber other args.
Change-Id: I4f1dc0519afb77500eae1c0e6ac8745e51f7aa4e
Reviewed-on: https://go-review.googlesource.com/c/go/+/306029
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: David Chase <drchase@google.com>
Handle the case where types can be partially inferred for an
instantiated function that is not immediately called. The key for the
Inferred map is the CallExpr (if inferring types required the function
arguments) or the IndexExpr (if types could be inferred without the
function arguments).
Added new tests for the case where the function isn't immediately called
to typelist.go.
Change-Id: I60f503ad67cd192da2f2002060229efd4930dc39
Reviewed-on: https://go-review.googlesource.com/c/go/+/305909
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The correct setting of t.nod is needed when exporting types. Make sure
we create instantiated named types correctly so t.nod is set.
New test file interfacearg.go that tests this (by instantiating a type
with an interface). Also has tests for various kinds of method
expressions.
Change-Id: Ia7fd9debd495336b73788af9e35d72331bb7d2b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/305730
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fix various small bugs related to delaying transformations due to type
params. Most of these relate to the need to delay a transformation when
an argument of an expression or statement has a type parameter that has
a structural constraint. The structural constraint implies the operation
should work, but the transformation can't happen until the actual value
of the type parameter is known.
- delay transformations for send statements and return statements if
any args/values have type params.
- similarly, delay transformation of a call where the function arg has
type parameters. This is mainly important for the case where the
function arg is a pure type parameter, but has a structural
constraint that requires it to be a function. Move the setting of
n.Use to transformCall(), since we may not know how many return
values there are until then, if the function arg is a type parameter.
- set the type of unary expressions from the type2 type (as we do with
most other expressions), since that works better with expressions
with type params.
- deal with these delayed transformations in subster.node() and convert
the CALL checks to a switch statement.
- make sure ir.CurFunc is set properly during stenciling, including
closures (needed for transforming return statements during
stenciling).
New test file typelist.go with tests for these cases.
Change-Id: I1b82f949d8cec47d906429209e846f4ebc8ec85e
Reviewed-on: https://go-review.googlesource.com/c/go/+/305729
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Under certain circumstances, the existing rules for bit operations can
produce code that writes beyond its intended bounds. For example,
consider the following code:
func repro(b []byte, addr, bit int32) {
_ = b[3]
v := uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 | uint32(b[3])<<24 | 1<<(bit&31)
b[0] = byte(v)
b[1] = byte(v >> 8)
b[2] = byte(v >> 16)
b[3] = byte(v >> 24)
}
Roughly speaking:
1. The expression `1 << (bit & 31)` is rewritten into `(SHLL 1 bit)`
2. The expression `uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 |
uint32(b[3])<<24` is rewritten into `(MOVLload &b[0])`
3. The statements `b[0] = byte(v) ... b[3] = byte(v >> 24)` are
rewritten into `(MOVLstore &b[0], v)`
4. `(ORL (SHLL 1, bit) (MOVLload &b[0]))` is rewritten into
`(BTSL (MOVLload &b[0]) bit)`. This is a valid transformation because
the destination is a register: in this case, the bit offset is masked
by the number of bits in the destination register. This is identical
to the masking performed by `SHL`.
5. `(MOVLstore &b[0] (BTSL (MOVLload &b[0]) bit))` is rewritten into
`(BTSLmodify &b[0] bit)`. This is an invalid transformation because
the destination is memory: in this case, the bit offset is not
masked, and the chosen instruction may write outside its intended
32-bit location.
These changes fix the invalid rewrite performed in step (5) by
explicitly maksing the bit offset operand to `BT(S|R|C)(L|Q)modify`. In
the example above, the adjusted rules produce
`(BTSLmodify &b[0] (ANDLconst [31] bit))` in step (5).
These changes also add several new rules to rewrite bit sets, toggles,
and clears that are rooted at `(OR|XOR|AND)(L|Q)modify` operators into
appropriate `BT(S|R|C)(L|Q)modify` operators. These rules catch cases
where `MOV(L|Q)store ((OR|XOR|AND)(L|Q) ...)` is rewritten to
`(OR|XOR|AND)(L|Q)modify` before the `(OR|XOR|AND)(L|Q) ...` can be
rewritten to `BT(S|R|C)(L|Q) ...`.
Overall, compilecmp reports small improvements in code size on
darwin/amd64 when the changes to the compiler itself are exlcuded:
file before after Δ %
runtime.s 536464 536412 -52 -0.010%
bytes.s 32629 32593 -36 -0.110%
strings.s 44565 44529 -36 -0.081%
os/signal.s 7967 7959 -8 -0.100%
cmd/vendor/golang.org/x/sys/unix.s 81686 81678 -8 -0.010%
math/big.s 188235 188253 +18 +0.010%
cmd/link/internal/loader.s 89295 89056 -239 -0.268%
cmd/link/internal/ld.s 633551 633232 -319 -0.050%
cmd/link/internal/arm.s 18934 18928 -6 -0.032%
cmd/link/internal/arm64.s 31814 31801 -13 -0.041%
cmd/link/internal/riscv64.s 7347 7345 -2 -0.027%
cmd/compile/internal/ssa.s 4029173 4033066 +3893 +0.097%
total 21298280 21301472 +3192 +0.015%
Change-Id: I2e560548b515865129e1724e150e30540e9d29ce
GitHub-Last-Rev: 9a42bd29a5
GitHub-Pull-Request: golang/go#45242
Reviewed-on: https://go-review.googlesource.com/c/go/+/304869
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
This test is verifying that setting or unsetting an environment
variable in Go via the "os" package makes that change visible to the C
getenv function. The test has been failing on Windows since CL 304569;
it isn't clear to me whether it was running at all before that point.
On Windows the getenv and _putenv C functions are not thread-safe,
so Go's os.Setenv and os.Getenv use the SetEnvironmentVariable and
GetEnvironmentVariable system calls instead. That seems to work fine
in practice; however, changes via SetEnvironmentVariable are
empirically not visible to the C getenv function on certain versions
of Windows.
The MSDN getenv documentation¹ states that ‘getenv operates only on
the data structures accessible to the run-time library and not on the
environment “segment” created for the process by the operating system.
Therefore, programs that use the envp argument to main or wmain may
retrieve invalid information.’ That may be related to what we're
seeing here.
(https://github.com/curl/curl/issues/4774 describes this same behavior
observed in the curl project.)
¹https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/getenv-wgetenv?view=msvc-160#remarks
Updates #36705
Change-Id: I222792f75c650f32c5025b0fa3edab232ff66353
Reviewed-on: https://go-review.googlesource.com/c/go/+/304669
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Change-Id: I868eeb79edaba9e3afc1407ae18b89daf7e67037
Reviewed-on: https://go-review.googlesource.com/c/go/+/304570
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This requires us to add a fake argument to issue36705.go so that the
test driver will build it with "go run" rather than "go tool compile".
Change-Id: Id08b97d898ee3e9d6c1fbb072a0a9317ed9faedd
Reviewed-on: https://go-review.googlesource.com/c/go/+/304569
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
We need to be careful that when doing value graph surgery, we not
re-substitute a value that has already been substituted. That can lead
to confusing a previous iteration's value with the current iteration's
value.
The simple fix in this CL just aborts the optimization if it detects
intertwined phis (a phi which is the argument to another phi). It
might be possible to keep the optimization with a more complicated
CL, but:
1) This CL is clearly safe to backport.
2) There were no instances of this abort triggering in
all.bash, prior to the test introduced in this CL.
Fixes#45175
Change-Id: I2411dca03948653c053291f6829a76bec0c32330
Reviewed-on: https://go-review.googlesource.com/c/go/+/304251
Trust: Keith Randall <khr@golang.org>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Change-Id: Icfa204761045b72a8ea173fd55eddf1f0e58d819
Reviewed-on: https://go-review.googlesource.com/c/go/+/304253
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Adds code to the compiler's "order" phase to rewrite go and defer
statements to always be argument-less. E.g.
defer f(x,y) => x1, y1 := x, y
defer func() { f(x1, y1) }
This transformation is not beneficial on its own, but it helps
simplify runtime defer handling for the new register ABI (when
invoking deferred functions on the panic path, the runtime doesn't
need to manage the complexity of determining which args to pass in
register vs memory).
This feature is currently enabled by default if GOEXPERIMENT=regabi or
GOEXPERIMENT=regabidefer is in effect.
Included in this CL are some workarounds in the runtime to insure that
"go" statement targets in the runtime are argument-less already (since
wrapping them can potentially introduce heap-allocated closures, which
are currently not allowed). The expectation is that these workarounds
will be temporary, and can go away once we either A) change the rules
about heap-allocated closures, or B) implement some other scheme for
handling go statements.
Change-Id: I01060d79a6b140c6f0838d6e6813f807ccdca319
Reviewed-on: https://go-review.googlesource.com/c/go/+/298669
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Temporarily disable a questionable test case in fixedbugs/bug193.go
and enable the test as a whole. See the issues below for details.
Updates #45114.
Updates #45117.
Change-Id: I1de6f8d79b592eeeec139cd92b6c9cac56a9a74b
Reviewed-on: https://go-review.googlesource.com/c/go/+/303094
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Based on https://golang.org/cl/284256 for go/types.
Brings this code more in line with go/types.
Adjusted various tests to match new error messages which
generally are now better: for assignment errors, instead
of a generic "cannot convert" we now say "cannot use"
followed by a clearer reason as to why not.
Major differences to go/types with respect to the changed
files:
- Some of the new code now returns error codes, but they
are only used internally for now, and not reported with
errors.
- go/types does not "convert" untyped nil values to target
types, but here we do. This is unchanged from how types2
handled this before this CL.
Change-Id: If45336d7ee679ece100f6d9d9f291a6ea55004d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/302757
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For additions, compares, and slices, create transform functions that do
just the transformations for those nodes by the typecheck package (given
that the code has been fully typechecked by types2). For nodes that have
no args with typeparams, we call these transform functions directly in
noder2. But for nodes that have args with typeparams, we have to delay
and call the tranform functions during stenciling, since we don't know
the specific types involved.
We indicate that a node still needs transformation by setting Typecheck
to a new value 3. This value means the current type of the node has been
set (via types2), but the node may still need transformation.
Had to export typcheck.IsCmp and typecheck.Assignop from the typecheck
package.
Added new tests list2.go (required delaying compare typecheck/transform
because of != compare in checkList) and adder.go (requires delaying add
typecheck/transform, since it can do addition for numbers or strings).
There are several more transformation functions needed for expressions
(indexing, calls, etc.) and several more complicated ones needed for
statements (mainly various kinds of assignments).
Change-Id: I7d89d13a4108308ea0304a4b815ab60b40c59b0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/303091
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Optimize some patterns into rev16/rev16w instruction.
Pattern1:
(c & 0xff00ff00)>>8 | (c & 0x00ff00ff)<<8
To:
rev16w c
Pattern2:
(c & 0xff00ff00ff00ff00)>>8 | (c & 0x00ff00ff00ff00ff)<<8
To:
rev16 c
This patch is a copy of CL 239637, contributed by Alice Xu(dianhong.xu@arm.com).
Change-Id: I96936c1db87618bc1903c04221c7e9b2779455b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/268377
Trust: fannie zhang <Fannie.Zhang@arm.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When -clobberdeadreg flag is set, the compiler inserts code that
clobbers integer registers at call sites. This may be helpful for
debugging register ABI.
Only implemented on AMD64 for now.
Change-Id: Ia203d3f891c30fd95d0103489056fe01d63a2899
Reviewed-on: https://go-review.googlesource.com/c/go/+/302809
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
types2 will give us a constant with a type T, if an untyped constant is
used with another operand of type T (in a provably correct way). When we
substitute in the type args during stenciling, we now know the real type
of the constant. We may then need to change the BasicLit.val to be the
correct type (e.g. convert an int64Val constant to a floatVal constant).
Otherwise, later parts of the compiler will be confused.
Updated tests list.go and double.go with uses of untyped constants.
Change-Id: I9966bbb0dea3a7de1c5a6420f8ad8af9ca84a33e
Reviewed-on: https://go-review.googlesource.com/c/go/+/303089
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Now that we can set GOEXPERIMENT at build time, we no longer need
-d=fieldtrack in the compiler to enabled field tracking at build time.
Switch the one test that uses -d=fieldtrack to use GOEXPERIMENT
instead so we can eliminate this debug flag and centralize on
GOEXPERIMENT.
Updates #42681.
Change-Id: I14c352c9a97187b9c5ec8027ff672d685f22f543
Reviewed-on: https://go-review.googlesource.com/c/go/+/302969
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently, the nosplit test disables ABI wrapper generation because it
generates a main.main in assembly, and so the ABI wrapper for calling
from runtime.main to main.main counts against the nosplit limit, which
cases some of the tests to fail.
Fix this by first entering ABI0 in a splittable context and then
calling from there into the test entry point, since this doesn't
introduce an ABI wrapper.
While we're here, this CL removes the test's check for the
framepointer experiment. That's now statically enabled, so it doesn't
appear in the experiment line, and enabling any other experiment
causes the test to think that the framepointer experiment *isn't*
enabled.
For #40724.
Change-Id: I6291eb9391f129779e726c5fc8c41b7b4a14eeb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/302772
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
This CL adds rewrite rules for CSETM, CSINC, CSINV, and CSNEG. By adding
these rules, we can save one instruction.
For example,
func test(cond bool, a int) int {
if cond {
a++
}
return a
}
Before:
MOVD "".a+8(RSP), R0
ADD $1, R0, R1
MOVBU "".cond(RSP), R2
CMPW $0, R2
CSEL NE, R1, R0, R0
After:
MOVBU "".cond(RSP), R0
CMPW $0, R0
MOVD "".a+8(RSP), R0
CSINC EQ, R0, R0, R0
This patch is a copy of CL 285694. Co-authored-by: JunchenLi
<junchen.li@arm.com>
Change-Id: Ic1a79e8b8ece409b533becfcb7950f11e7b76f24
Reviewed-on: https://go-review.googlesource.com/c/go/+/302231
Trust: fannie zhang <Fannie.Zhang@arm.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Change-Id: Ie52d70d2ae8a21acacf0745a4093650b03ac43f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/302371
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL resurrects the clobberdead debugging mode (CL 23924).
When -clobberdead flag is set (TODO: make it GOEXPERIMENT?), the
compiler inserts code that clobbers all dead stack slots that
contains pointers.
Mark windows syscall functions cgo_unsafe_args, as the code
actually does that, by taking the address of one argument and
passing it to cgocall.
Change-Id: Ie09a015f4bd14ae6053cc707866e30ae509b9d6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/301791
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
For Builtin ops, we currently stay with using the old
typechecker to transform the call to a more specific expression
and possibly use more specific ops. However, for a bunch of the
ops, we delay calling the old typechecker if any of the args have
type params, for a variety of reasons.
In the near future, we will start creating separate functions that do
the same transformations as the old typechecker for calls, builtins,
indexing, comparisons, etc. These functions can then be called at noder
time for nodes with no type params, and at stenciling time for nodes
with type params.
Remove unnecessary calls to types1 typechecker for most kinds of
statements (still need it for SendStmt, AssignStmt, ReturnStmt, and
SelectStmt). In particular, we don't need it for RangeStmt, and this
avoids some complaints by the types1 typechecker on generic code.
Other small changes:
- Fix check on whether to delay calling types1-typechecker on type
conversions. Should check if HasTParam is true, rather than if the
type is directly a TYPEPARAM.
- Don't call types1-typechecker on an indexing operation if the left
operand has a typeparam in its type and is not obviously a TMAP,
TSLICE, or TARRAY. As above, we will eventually have to create a new
function that can do the required transformations (for complicated
cases) at noder time or stenciling time.
- Copy n.BuiltinOp in subster.node()
- The complex arithmetic example in absdiff.go now works.
- Added new tests double.go and append.go
- Added new example with a new() call in settable.go
Change-Id: I8f377afb6126cab1826bd3c2732aa8cdf1f7e0b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/301951
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Code generation for open defers failed to account for
presence of method receiver and thus was OFF BY ONE.
Fixes#45062.
Updates #44816.
Updates #40724.
Change-Id: Ia90ea8fd0f7d823e1f757c406f9127136c2ffdd2
Reviewed-on: https://go-review.googlesource.com/c/go/+/302249
Trust: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Repair of CL 300749.
ALSO:
found evidence that stack maps for bodyless methods are wrong.
gofmt in test/abi
removed never-executed code in types/size.go
Updates #44816.
Updates #40724.
Change-Id: Ifeb5fee60f60e7c7b58ee0457f58a3265d6cf3f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/302071
Trust: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Ignore an embedded type in an interface which is the predeclared
interface "comparable" (which currently can only be in a type
constraint), since the name doesn't resolve and the "comparable" type
doesn't have any relevant methods (for the purposes of the compiler).
Added new test case graph.go that needs this fix.
Change-Id: I2443d2c3dfeb9d0a78aaaaf91a2808ae2759d247
Reviewed-on: https://go-review.googlesource.com/c/go/+/301831
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts commit 8ed438c077, CL 300749.
Reason for revert: Looks like it crashes on link-register architectures
Change-Id: I0c261df58900008cada3359889d2a87508158447
Reviewed-on: https://go-review.googlesource.com/c/go/+/302053
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
ALSO:
found evidence that stack maps for bodyless methods are wrong.
gofmt in test/abi
removed never-executed code in types/size.go
Updates #44816.
Change-Id: I658c33f049337fb6f1e625f0c55430d25bfa877e
Reviewed-on: https://go-review.googlesource.com/c/go/+/300749
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Added test example orderedmap.go (binary search tree) that requires this
fix (calling function compare in _Map).
Also added new tests slices.go and metrics.go that just work.
Change-Id: Ifa5f42ab6eee9aa54c40f0eca19e00a87f8f608a
Reviewed-on: https://go-review.googlesource.com/c/go/+/301829
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Add support for maps in subster.typ(). Add new test cases maps.go and set.go.
Change substitution of a TFUNC in subster.typ() to always create new
param and result structs if any of the receiver, param, or result
structs get substituted. All these func structs must be copied, because
they have offset fields that are dependent, and so must have an
independent copy for each new signature (else there will be an error
later when frame offsets are calculated).
Change-Id: I576942a62f06b46b6f005abc98f65533008de8dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/301670
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Add support for channels in subster.typ(). Add new test file chans.go.
To support assignability of bidirectional channel args to directional
channel params, I needed to type check generic calls after they are
instantiated. (Eventually, we will create separate functions to just do
the assignability logic, so we don't need to call the old typechecker in
this case.) So, for generic calls, we now leave the call as OCALL (as a
signal that the call still needs typechecking), and do typecheck.Call()
during stenciling.
Smaller changes:
- Set the type of an instantiated OCLOSURE node (and not just the associated
OFUNC node)
- In instTypeName2, filter out the space that types2.TypeString inserts
after a common in a typelist. Our standard naming requires no space
after the comma.
- With the assignability fix above, I no longer need the explicit
conversions in cons.go.
Change-Id: I148858bfc6708c0aa3f50bad7debce2b8c8c091f
Reviewed-on: https://go-review.googlesource.com/c/go/+/301669
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This is enabled with a ridiculous magic name for method,
or for last input type passed, that needs to be changed
to something inutterable before actual release.
Ridiculous method name: MagicMethodNameForTestingRegisterABI
Ridiculous last (input) type name: MagicLastTypeNameForTestingRegisterABI
RLTN is tested with strings.Contains, so you can have
MagicLastTypeNameForTestingRegisterABI1
and
MagicLastTypeNameForTestingRegisterABI2
if that is helpful
Includes test test/abi/fibish2.go
Updates #44816.
Change-Id: I592a6edc71ca9bebdd1d00e24edee1ceebb3e43f
Reviewed-on: https://go-review.googlesource.com/c/go/+/299410
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Simple change to avoid calling the old typechecker in noder.Addr(). This
fixes cases where generic code calls a pointer method with a non-pointer
receiver.
Added test typeparam/lockable.go that now works with this change.
For lockable.go to work, also fix incorrect check to decide whether to
translate an OXDOT now or later. We should delay translating an OXDOT
until instantiation (because we don't know how embedding, etc. will
work) if the receiver has any typeparam, not just if the receiver type
is a simple typeparam. We also have to handle OXDOT for now in
IsAddressable(), until we can remove calls to the old typechecker in
(*irgen).funcBody().
Change-Id: I77ee5efcef9a8f6c7133564106a32437e36ba4bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/300990
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #44383
Change-Id: I3610105dad3574e210e226d3ba80a4ba5a7eeaa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/300789
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In the case of partially inferred type arguments, we need to use the
IndexExpr as the key in g.info.Inferred[] rather than the CallExpr.
Added an extra fromStrings1 call in the settable.go test that tests
partially inferred type arguments. This new call uses a new concrete
type SettableString as well.
I also added another implementation fromStrings3 (derived from a go2go
tests) that typechecks but intentionally causes a panic.
Change-Id: I74d35c5a741f72f37160a96fbec939451157f392
Reviewed-on: https://go-review.googlesource.com/c/go/+/300309
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
In the ppc64 ISA DS form loads and stores are restricted to offset
fields that are a multiple of 4. This is currently handled with checks
in the rules that generate MOVDload, MOVWload, MOVDstore and
MOVDstorezero to prevent invalid instructions from getting to the
assembler.
An unhandled case was discovered which led to the search for a better
solution to this problem. Now, instead of checking the offset in the
rules, this will be detected when processing these Ops in
ssaGenValues in ppc64/ssa.go. If the offset is not valid, the address
of the symbol to be loaded or stored will be computed using the base
register + offset, and that value used in the new base register.
With the full address in the base register, the offset field can be
zero in the instruction.
Updates #44739
Change-Id: I4f3c0c469ae70a63e3add295c9b55ea0e30ef9b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/299789
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Deal with cases like: 'type P[T any] T' (used to add methods to an
arbitrary type T), In this case, P[T] has kind types.TTYPEPARAM (as does
T itself), but requires more code to substitute than a simple TTYPEPARAM
T. See the comment near the beginning of subster.typ() in stencil.go.
Add new test absdiff.go. This test has a case for complex types (which
I've commented out) that will only work when we deal better with Go
builtins in generic functions (like real and imag).
Remove change in fmt.go for TTYPEPARAMS that is no longer needed (since
all TTYPEPARAMS have a sym) and was sometimes causing an extra prefix
when formatting method names.
Separate out the setting of a TTYPEPARAM bound, since it can reference
the TTYPEPARAM being defined, so must be done separately. Also, we don't
currently (and may not ever) need bounds after types2 typechecking.
Change-Id: Id173057e0c4563b309b95e665e9c1151ead4ba77
Reviewed-on: https://go-review.googlesource.com/c/go/+/300049
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
These instructions are actually 5 argument opcodes as specified
by the ISA. Prior to this patch, the MB and ME arguments were
merged into a single bitmask operand to workaround the limitations
of the ppc64 assembler backend.
This limitation no longer exists. Thus, we can pass operands for
these opcodes without having to merge the MB and ME arguments in
the assembler frontend or compiler backend.
Likewise, support for 4 operand variants is unchanged.
Change-Id: Ib086774f3581edeaadfd2190d652aaaa8a90daeb
Reviewed-on: https://go-review.googlesource.com/c/go/+/298750
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
Trust: Carlos Eduardo Seo <carlos.seo@linaro.org>
ABI info producer and consumer had different ideas for register
order for parameters.
Includes a test, includes improvements to debugging output.
Updates #44816.
Change-Id: I4812976f7a6c08d6fc02aac1ec0544b1f141cca6
Reviewed-on: https://go-review.googlesource.com/c/go/+/299570
Trust: David Chase <drchase@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Includes more enhancements to debugging output.
Updates #44816.
Change-Id: I5b21815cf37ed21e7dec6c06f538090f32260203
Reviewed-on: https://go-review.googlesource.com/c/go/+/299409
Trust: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Get instantiatiated generic types working with interfaces, including
typechecking assignments to interfaces and instantiating all the methods
properly. To get it all working, this change includes:
- Add support for substituting in interfaces in subster.typ()
- Fill in the info for the methods for all instantiated generic types,
so those methods will be available for later typechecking (by the old
typechecker) when assigning an instantiated generic type to an
interface. We also want those methods available so we have the list
when we want to instantiate all methods of an instantiated type. We
have both for instantiated types encountered during the initial noder
phase, and for instantiated types created during stenciling of a
function/method.
- When we first create a fully-instantiated generic type (whether
during initial noder2 pass or while instantiating a method/function),
add it to a list so that all of its methods will also be
instantiated. This is needed so that an instantiated type can be
assigned to an interface.
- Properly substitute type names in the names of instantiated methods.
- New accessor methods for types.Type.RParam.
- To deal with generic types which are empty structs (or just don't use
their type params anywhere), we want to set HasTParam if a named type
has any type params that are not fully instantiated, even if the
type param is not used in the type.
- In subst.typ() and elsewhere, always set sym.Def for a new forwarding
type we are creating, so we always create a single unique type for
each generic type instantiation. This handles recursion within a
type, and also recursive relationships across many types or methods.
We remove the seen[] hashtable, which was serving the same purpose,
but for subst.typ() only. We now handle all kinds of recursive types.
- We don't seem to need to force types.CheckSize() on
created/substituted generic types anymore, so commented out for now.
- Add an RParams accessor to types2.Signature, and also a new
exported types2.AsSignature() function.
Change-Id: If6c5dd98427b20bfe9de3379cc16f83df9c9b632
Reviewed-on: https://go-review.googlesource.com/c/go/+/298449
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
The compiler currently has problem that some imported type is missing
size calculation. The problem is not triggered until CL 283313 merged,
due to the compiler can compile the functions immediately when it sees
them, so during SSA generation, size calculation is still ok.
CL 283313 makes the compiler always push functions to compile queue,
then drain from it for compiling function. During this process, the
types calculation size is disabled, so calculating size during SSA now
make the compiler crashes.
To fix this, we can just always calculate type size during typechecking,
when importing type from other packages.
Fixes#44732
Change-Id: I8d00ea0b5aadd432154908280e55d85c75f3ce92
Reviewed-on: https://go-review.googlesource.com/c/go/+/299689
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 280456 introduced a new store combining rule. On the LHS some
of the Aux and AuxInt of the stores are not specified, therefore
ignored during the matching. The rule is only correct if they
match. This CL adds explict match.
TODO: maybe we want the rule matcher require Aux/AuxInt to be
always specified on the LHS (using _ to explicitly ignore)? Or
maybe we want it to match the zero value if not specified? The
current approach is error-prone.
Fixes#44823.
Change-Id: Ic12b4a0de63117f2f070039737f0c905f28561bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/299289
Trust: Cherry Zhang <cherryyz@google.com>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Invalid constant was already reported by noder, so don't re-check in
typecheck, which lead to compiler crashing.
Updates #43311
Change-Id: I48e2f540601cef725c1ff628c066ed15d848e771
Reviewed-on: https://go-review.googlesource.com/c/go/+/298713
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Same as CL 294031, but for OTYPESW.
Updates #43311
Change-Id: I996f5938835baff1d830c17ed75652315106bdfd
Reviewed-on: https://go-review.googlesource.com/c/go/+/298712
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The invalid interface type will be reported already, so don't expand
that invalid one, which causes the compiler crashes.
Updates #43311
Change-Id: Ic335cfa74f0b9fcfd0929dc5fd31d9156a8f5f5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/298710
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CheckReturn uses fn.Type() unconditionally, so for invalid function,
fn.Type() will be nil, causes the compiler crashes.
Updates #43311
Change-Id: I4420dd296c72ea83986b38fbf2c7f51fa59757c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/298709
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
includes three tests
Change-Id: I33ac0cfe35085d4b6ad2775abcaa3d7d6527b49f
Reviewed-on: https://go-review.googlesource.com/c/go/+/297031
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It is not multithreaded-compilation-safe, and also seems
to cause problems on the noopt-builder.
Change-Id: I52dbcd507d256990f1ec7c8040ec7b76595aae4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/298850
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Added a test that exercises named results
Change-Id: Ie228b68f4f846266595a95e0f65a6e4b8bf79635
Reviewed-on: https://go-review.googlesource.com/c/go/+/297029
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
at least for ints and strings
includes simple test
For #40724.
Change-Id: Ib8484e5b957b08f961574a67cfd93d3d26551558
Reviewed-on: https://go-review.googlesource.com/c/go/+/295309
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Verified with test and with single step watching changes to register
values across morestack calls, after reload.
Also added stack-growth test with pointer parameters of varying lifetime.
For #40724.
Change-Id: Idb5fe27786ac5c6665a734d41e68d3d39de2f4da
Reviewed-on: https://go-review.googlesource.com/c/go/+/294429
Trust: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Morestack works for non-pointer register parameters
Within a function body, pointer-typed parameters are correctly
tracked.
Results still not hooked up.
For #40724.
Change-Id: Icaee0b51d0da54af983662d945d939b756088746
Reviewed-on: https://go-review.googlesource.com/c/go/+/294410
Trust: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Otherwise, if -d=panic was set, check2 will treat already reported
error as internal compiler error.
For #43311Fixes#44445
Change-Id: I5dbe06334666df21d9107396b9dcfdd905aa1e44
Reviewed-on: https://go-review.googlesource.com/c/go/+/294850
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
After CL 272654, the compiler now use go/constant.Value to represent
constant nodes. That makes ir.ConstantValue requires node type to
correctly return value for untyped int node. But untyped int node can
have nil type after typechecked, e.g: using int value as key for
map[string]int, that makes the compiler crashes.
To fix it, just don't add the invalid key to constSet, since when
it's not important to report duplicated keys when they aren't valid.
For #43311Fixes#44432
Change-Id: I44d8f2b95f5cb339e77e8a705a94bcb16e62beb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/294034
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When syntax.Parse returns error, noder.file will be nil. Currently, we
continue accessing it regardlessly and depend on gc.hidePanic to hide
the panic from user.
Instead, we should gracefully handle the error in LoadPackage, then exit
earlier if any error occurred.
Updates #43311
Change-Id: I0a108ef360bd4f0cc9f481071b8967355e1513af
Reviewed-on: https://go-review.googlesource.com/c/go/+/294030
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add generic rule to rewrite the single-precision square root expression
with one single-precision instruction. The optimization will reduce two
times of precision converting between double-precision and single-precision.
On arm64 flatform.
previous:
FCVTSD F0, F0
FSQRTD F0, F0
FCVTDS F0, F0
optimized:
FSQRTS S0, S0
And this patch adds the test case to check the correctness.
This patch refers to CL 241877, contributed by Alice Xu
(dianhong.xu@arm.com)
Change-Id: I6de5d02281c693017ac4bd4c10963dd55989bd7e
Reviewed-on: https://go-review.googlesource.com/c/go/+/276873
Trust: fannie zhang <Fannie.Zhang@arm.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
On import, make sure that an empty closure is represented as a single
empty block statement. Otherwise, the closure is dropped. Block
statements are not exported explicitly, so must recreate on import.
Fixes#44330
Change-Id: I061598f0f859dd71d2d0cbd10c77cdd81525d1f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/297569
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
One of escape analysis's responsibilities is to summarize whether/how
each function parameter flows to the heap so we can correctly
incorporate those flows into callers' escape analysis data flow
graphs.
As an optimization, we separately record when parameters flow to
result parameters, so that we can more precisely analyze parameter
flows based on how the results are used at the call site. However, if
a named result parameter itself needs to be heap allocated, this
optimization isn't safe and the parameter needs to be recorded as
flowing to heap rather than flowing to result.
Escape analysis used to get this correct because it conservatively
rewalked the data-flow graph multiple times. So even though it would
incorrectly record the result parameter flow, it would separately find
a flow to the heap. However, CL 196811 (specifically, case 3)
optimized the walking logic to reduce unnecessary rewalks causing us
to stop finding the extra heap flow.
This CL fixes the issue by correcting location.leakTo to be sensitive
to sink.escapes and not record result-flows when the result parameter
escapes to the heap.
Fixes#44614.
Change-Id: I48742ed35a6cab591094e2d23a439e205bd65c50
Reviewed-on: https://go-review.googlesource.com/c/go/+/297289
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
A function returning multiple results, some of them zero-width,
will have more than one result present at an offset. Be sure
that offset AND type match.
Includes test.
Change-Id: I3eb1f56116d989b4e73f533fefabb1bf554c901b
Reviewed-on: https://go-review.googlesource.com/c/go/+/297169
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
- Deal with closures in generic functions by fixing the stenciling code
- Deal with instantiated function values (instantiated generic
functions that are not immediately called) during stenciling. This
requires changing the OFUNCINST node to an ONAME node for the
appropriately instantiated function. We do this in a second pass,
since this is uncommon, but requires editing the tree at multiple
levels.
- Check global assignments (as well as functions) for generic function
instantiations.
- Fix a bug in (*subst).typ where a generic type in a generic function
may definitely not use all the type args of the function, so we need
to translate the rparams of the type based on the tparams/targs of
the function.
- Added new test combine.go that tests out closures in generic
functions and instantiated function values.
- Added one new variant to the settable test.
- Enabling inlining functions with closures for -G=3. (For now, set
Ntype on closures in -G=3 mode to keep compatibility with later parts
of compiler, and allow inlining of functions with closures.)
Change-Id: Iea63d5704c322e42e2f750a83adc8b44f911d4ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/296269
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
In CL 253457, we did the same fix for direct function calls. But for
method calls, the receiver argument also need to be passed through the
wrapper function, which we are not doing so the compiler crashes with
the code in #44415.
It will be nicer if we can rewrite OCALLMETHOD to normal OCALLFUNC, but
that will be for future CL. The passing receiver argument to wrapper
function is easier for backporting to go1.16 branch.
Fixes#44415
Change-Id: I03607a64429042c6066ce673931db9769deb3124
Reviewed-on: https://go-review.googlesource.com/c/go/+/296490
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
ComputeAddrtaken needs to descend into closures, now that imported
bodies can include closures. The bug was that we weren't properly
setting Addrtaken for a variable inside a closure inside a function that
we were importing.
For now, still disable inlining of functions with closures for -G mode.
I'll enable it in a later change -- there are just a few fixes related
to the fact that we don't need to set Ntype for closure functions.
Added a test derived from the cilium repro in the issue.
Fixes#44370
Change-Id: Ida2a403636bf8740b471b3ad68b5474951811e19
Reviewed-on: https://go-review.googlesource.com/c/go/+/296649
Run-TryBot: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reverts commit CL 294849.
Reason for revert: this doesn't actually fix the issue, as revealed
by the noopt builder's failures.
Change-Id: Ib4ea9ceb4d75e46b3b91ec348b365fd8c83316ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/296629
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The code for delayed declaration of inlined result parameters only
handles non-empty return statements. This is generally okay, because
we already early declare if there are any (non-blank) named result
parameters.
But if a user writes a function with only blank result parameters and
with exactly one return statement, which is empty, then they could end
up hitting the dreaded "Value live at entry" ICE.
This CL fixes the issue by ensuring we always early declare inlined
result parameters if there are any empty return statements.
Fixes#44355.
Change-Id: I315f3853be436452883b1ce31da1bdffdf24d506
Reviewed-on: https://go-review.googlesource.com/c/go/+/293293
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
In CL 253457, we did the same fix for direct function calls. But for
method calls, the receiver argument also need to be passed through the
wrapper function, which we are not doing so the compiler crashes with
the code in #44415.
As we already rewrite t.M(...) into T.M(t, ...) during walkCall1, to fix
this, we can do the same trick in wrapCall, so the receiver argument
will be treated as others.
Fixes#44415
Change-Id: I396182983c85d9c5e4494657da79d25636e8a079
Reviewed-on: https://go-review.googlesource.com/c/go/+/294849
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
bug511.dir/b.go:10:14: error: reference to undefined field or method 'M'
Change-Id: I9f96dc5c7254b310bc3e15b0bc588d62718cb4b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/292009
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
math.Float32bits was not being inlined across package boundaries.
Create a private func that can be inlined with -l.
Change-Id: Ic50bf4727dd8ade09d011eb204006b7ee88db34a
Reviewed-on: https://go-review.googlesource.com/c/go/+/295989
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Added a flag '-d=inlfuncswithclosures=1' to allow inlining functions with
closures, and change the default to off for now, until #44370 is fixed.
Updates #44370.
Change-Id: Ic17723aa5c091d91f5f5004d8b63ec7125257acf
Reviewed-on: https://go-review.googlesource.com/c/go/+/296049
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
The code generated when storing eight bytes loaded from memory created a
series of small writes instead of a single, large one. The specific
pattern of instructions generated stored 1 byte, then 2 bytes, then 4
bytes, and finally 1 byte.
The new rules match this specific pattern both for amd64 and for s390x,
and convert it into a single instruction to store the 8 bytes. arm64 and
ppc64le already generated the right code, but the new codegen test
covers also those architectures.
Fixes#41663
Change-Id: Ifb9b464be2d59c2ed5034acf7b9c3e473f344030
Reviewed-on: https://go-review.googlesource.com/c/go/+/280456
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Plumb abi information into ssa/ssagen for plain calls
and plain functions (not methods). Does not extend all the
way through the compiler (yet).
One test disabled because it extends far enough to break the test.
Normalized all the compiler's register args TODOs to
// TODO(register args) ...
For #40724.
Change-Id: I0173a4579f032ac3c9db3aef1749d40da5ea01ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/293389
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
OCONVOP doesn't have effect in the compiled code so, it can be safely
excluded from inline cost calculation.
Also make sequence ODEREF OCONVNOP* OADDR cost 1. This is rather common
conversion, such as *(*uint32)(unsafe.Pointer(&x)).
Fixes#42788
Change-Id: I5001f7e89d985c198b6405694cdd5b819cf3f47a
Reviewed-on: https://go-review.googlesource.com/c/go/+/281232
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Elias Naur <mail@eliasnaur.com>
Some bit test instruction generation stopped triggering after
the change to addressing modes. I suspect this was just because
ANDQload was being generated before the rewrite rules could discover
the BTQ. Fix that by decomposing the ANDQload when it is surrounded
by a TESTQ (thus re-enabling the BTQ rules).
Fixes#44228
Change-Id: I489b4a5a7eb01c65fc8db0753f8cec54097cadb2
Reviewed-on: https://go-review.googlesource.com/c/go/+/291749
Trust: Keith Randall <khr@golang.org>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Currently, we keep track of slice len by mapping from slice ID to
len/cap SSA value. However, slice len/cap can have multiple SSA values,
so when updating fact table for slice len/cap, we only update in one
place.
Instead, we can take advantage of the transitive relations provided by
poset. So all duplicated slice lens are set as equal to one another.
When updating fact table for one, that fact will be reflected to all
others. The same mechanism is applied for slice cap.
Removes 15 bounds checks from std/cmd.
Fixes#42603
Change-Id: I32c07968824cc33765b1e441b3ae2c4b5f5997c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/273670
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 274294 improved findTypeLoop but also fixed a new found bug on master
branch. This Cl adds test cases for this.
Updates #44266
Change-Id: Ie4a07a3487758a1e4ad2f2847dcde975b10d2a77
Reviewed-on: https://go-review.googlesource.com/c/go/+/292889
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For import of functions with closures, the connections among closure
variables are constructed on-the-fly via CaptureName(). For multiple
nested closures, we need to temporarily set r.curfn to each closure we
construct, so that the processing of closure variables will be correct
for any nested closure inside that closure.
Fixes#44335
Change-Id: I34f99e2822250542528ff6b2232bf36756140868
Reviewed-on: https://go-review.googlesource.com/c/go/+/294212
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
