It works with NewTicker too, but is potentially a bit less efficient,
and reads wrong.
This is what happens when you TBR Windows changes, I guess.
R=golang-dev, gri, iant
CC=golang-dev
https://golang.org/cl/5536060
Previously, a timeout (in int64 nanoseconds) applied to a granularity
even smaller than one operation: a 100 byte read with a 1 second timeout
could take 100 seconds, if the bytes all arrived on the network 1 second
apart. This was confusing.
Rather than making the timeout granularity be per-Read/Write,
this CL makes callers set an absolute deadline (in time.Time)
after which operations will fail. This makes it possible to
set deadlines at higher levels, without knowing exactly how
many read/write operations will happen in e.g. reading an HTTP
request.
Fixes#2723
R=r, rsc, dave
CC=golang-dev
https://golang.org/cl/5555048
Duplicated fields from URL were dropped so that its behavior
is simple and expected when being stringified and when being
operated by packages like http. Most of the preserved fields
are in unencoded form, except for RawQuery which continues to
exist and be more easily handled via url.Query().
The RawUserinfo field was also replaced since it wasn't practical
to use and had limitations when operating with empty usernames
and passwords which are allowed by the RFC. In its place the
Userinfo type was introduced and made accessible through the
url.User and url.UserPassword functions.
What was previous built as:
url.URL{RawUserinfo: url.EncodeUserinfo("user", ""), ...}
Is now built as:
url.URL{User: url.User("user"), ...}
R=rsc, bradfitz, gustavo
CC=golang-dev
https://golang.org/cl/5498076
This CL revises existing platform-dependent default socket
options to make it possible to accomodate multiple multicast
datagram listeners on a single service port.
Also removes unnecessary SO_REUSEADDR, SO_REUSEPORT socket
options from unicast datagram sockets by default.
Fixes#1692.
R=devon.odell, alex.brainman, rsc
CC=golang-dev
https://golang.org/cl/5538052
This lets us mark net's cgo_stub.go as only to be
built when cgo is disabled.
R=golang-dev, ality, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/5489100
This CL makes both InterfaceAddrs and Addrs method on Interface
return IPNet struct for representing interface address and mask
like below:
interface "lo0": flags "up|loopback|multicast", ifindex 1, mtu 16384
interface address "fe80::1/64"
interface address "127.0.0.1/8"
interface address "::1/128"
joined group address "ff02::fb"
joined group address "224.0.0.251"
joined group address "ff02::2:65d0:d71e"
joined group address "224.0.0.1"
joined group address "ff01::1"
joined group address "ff02::1"
joined group address "ff02::1:ff00:1"
Fixes#2571.
R=rsc
CC=golang-dev
https://golang.org/cl/5489062
- no empty lines inside empty structs and interfaces
- top-level declarations are separated by a blank line if
a) they are of different kind (e.g. const vs type); or
b) there are documentation comments associated with a
declaration (this is new)
- applied gofmt -w misc src
The actual changes are in go/printer/nodes.go:397-400 (empty structs/interfaces),
and go/printer/printer.go:307-309 (extra line break). The remaining
changes are cleanups w/o changing the existing functionality.
Fixes issue 2570.
R=rsc
CC=golang-dev
https://golang.org/cl/5493057
We only want to attempt to un-gzip if there's a body (not in
response to a HEAD)
This was accidentally passing before, but revealed to be broken
when c3c6e72d7cc went in.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5477093
The obvious fix is breaking the build in non-obvious ways.
Reverting while waiting for the correct fix, if any is needed.
««« original CL description
net/http: fix bug in error checking
Thanks to josef86@gmail.com for pointing this out.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/5477092
»»»
R=iant
CC=golang-dev
https://golang.org/cl/5488085
breaks build
««« original CL description
http: close connection after printing panic stack trace
In a testing situation, it's possible for a local http
server to panic and the test exit without the stack trace
ever being printed.
Fixes#2480.
R=rsc, bradfitz
CC=golang-dev
https://golang.org/cl/5414048
»»»
R=bradfitz
CC=golang-dev
https://golang.org/cl/5482061
In a testing situation, it's possible for a local http
server to panic and the test exit without the stack trace
ever being printed.
Fixes#2480.
R=rsc, bradfitz
CC=golang-dev
https://golang.org/cl/5414048
It was fragile and non-portable, and then became spammy with
the os.EINVAL removal. Now it just uses the length of the
Peek return value instead.
R=golang-dev, alex.brainman
CC=golang-dev
https://golang.org/cl/5453065
All but 3 cases (in gcimporter.go and hixie.go)
are automatic conversions using gofix.
No attempt is made to use the new Append functions
even though there are definitely opportunities.
R=golang-dev, gri
CC=golang-dev
https://golang.org/cl/5447069
For now a pair of socket options SOL_SOCKET and SO_BINDTODEVICE
is supported on Linux only. I'd like to demote BindToDevice API
to syscall level because it's Linux dependent one.
In the near future, probably we may have a bit more portable
API that using IPROTO_IP/IPV6 level socket options to specify,
identify an inbound, outbound IP interface on incoming, outgoing
UDP and raw IP packets.
R=cw, golang-dev
CC=golang-dev
https://golang.org/cl/5447071
The allowed conversions before and after are:
type Tstring string
type Tbyte []byte
type Trune []rune
string <-> string // ok
string <-> []byte // ok
string <-> []rune // ok
string <-> Tstring // ok
string <-> Tbyte // was illegal, now ok
string <-> Trune // was illegal, now ok
Tstring <-> string // ok
Tstring <-> []byte // ok
Tstring <-> []rune // ok
Tstring <-> Tstring // ok
Tstring <-> Tbyte // was illegal, now ok
Tstring <-> Trune // was illegal, now ok
Update spec, compiler, tests. Use in a few packages.
We agreed on this a few months ago but never implemented it.
Fixes#1707.
R=golang-dev, gri, r
CC=golang-dev
https://golang.org/cl/5421057
The wrong length was being sent, and two parameters
were also transposed. Made the record type be a type
and made the constants typed, to prevent that sort
of bug in the future.
Fixes#2469
R=golang-dev, edsrzf
CC=golang-dev
https://golang.org/cl/5394046
- syscall (not os) now defines the Errno type.
- the low-level assembly functions Syscall, Syscall6, and so on
return Errno, not uintptr
- syscall wrappers all return error, not uintptr.
R=golang-dev, mikioh.mikioh, r, alex.brainman
CC=golang-dev
https://golang.org/cl/5372080
I had to replace the single use of io/ioutil
in the time package with a bytes.Buffer since
there would've been a dependency cycle.
There are no other uses of os.Time.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5372054
Arrange the code so that it's easier to keep edits in sync.
R=golang-dev, mikioh.mikioh, bradfitz, andybalholm, rsc
CC=golang-dev
https://golang.org/cl/5345041
This contains the files that required handiwork, mostly
Makefiles with updated TARGs, plus the two packages
with modified package names.
html/template/doc.go needs a separate edit pass.
test/fixedbugs/bug358.go is not legal go so gofix fails on it.
R=rsc
CC=golang-dev
https://golang.org/cl/5340050
A single character typo ("\n" instead of "\r") meant that
HTML data using DOS line breaks (CRLF) was not detected as HTML.
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/5365041
This moves DumpRequest, DumpResponse, NewChunkedReader,
and NewChunkedWriter out of http, as part of the continued
http diet plan.
Also, adds DumpRequestOut (for dumping outbound requests),
since DumpRequest's ambiguity (the "wire representation" in
what direction?) was often a source of confusion and bug
reports.
R=rsc, adg
CC=golang-dev
https://golang.org/cl/5339041
Part of http diet plan.
More of the lesser-used and newcomer-misleading parts of http will
move here.
R=r, rsc
CC=golang-dev
https://golang.org/cl/5336049
This is Go 1 package renaming CL #3.
This one merely moves the source; the import strings will be
changed after the next weekly release.
This one moves pieces into net.
http -> net/http
http/cgi -> net/http/cgi
http/fcgi -> net/http/fcgi
http/pprof -> net/http/pprof
http/httptest -> net/http/httptest
mail -> net/mail
rpc -> net/rpc
rpc/jsonrpc -> net/rpc/jsonrpc
smtp -> net/smtp
url -> net/url
Also remove rand (now math/rand) from NOTEST - it has a test.
The only edits are in Makefiles and deps.bash.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5335048
Socket descriptors are not closed when fd.connect() fails during generic socket creation.
After a connection failure [ECONNREFUSED] descriptors are left in SYN_SENT state indefinitely (unless they get an explicit RST). Repeated failed connections will eventually cause your program to hit the user/system max-open-files limit.
Fixes#2349.
R=golang-dev, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/5229047
Previously /etc/hosts would be ignored altogether, this change returns matching results
from that file without talking to a DNS server.
R=rsc
CC=golang-dev
https://golang.org/cl/5061042
The go/build package already recognizes
system-specific file names like
mycode_darwin.go
mycode_darwin_386.go
mycode_386.s
However, it is also common to write files that
apply to multiple architectures, so a recent CL added
to go/build the ability to process comments
listing a set of conditions for building. For example:
// +build darwin freebsd openbsd/386
says that this file should be compiled only on
OS X, FreeBSD, or 32-bit x86 OpenBSD systems.
These conventions are not yet documented
(hence this long CL description).
This CL adds build comments to the multi-system
files in the core library, a step toward making it
possible to use go/build to build them.
With this change go/build can handle crypto/rand,
exec, net, path/filepath, os/user, and time.
os and syscall need additional adjustments.
R=golang-dev, r, gri, r, gustavo
CC=golang-dev
https://golang.org/cl/5011046
I don't know the protocol regarding the zsyscall files which appear to
be hand-generated, so I've re-done them and added them to the change.
R=rsc, alex.brainman, nigeltao
CC=golang-dev
https://golang.org/cl/4975060
Note that this CL will break your existing code which uses
ParseCIDR.
This CL changes ParseCIDR("172.16.253.121/28") to return
the IP address "172.16.253.121", the network implied by the
network number "172.16.253.112" and mask "255.255.255.240".
R=rsc, borman
CC=golang-dev
https://golang.org/cl/4749043
This CL changes the internal form of IPMask for IPv4
from 16-byte to 4-byte, also adds Size method to IPMask
struct and changes output string format of IPMask.String
method.
R=rsc
CC=golang-dev
https://golang.org/cl/4950046
Doing a socket/listen on an unspecified address with an unspecified
address family is likely to result in an AF_INET6 socket on an IPv6
capable system, which under OpenBSD means IPv6 only - not IPv4 *and*
IPv6. In this case trying to connect to this socket from an IPv4
loopback address is not going to end well.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/4807057
This CL changes both JoinGroup and LeaveGroup methods
to take an interface as an argument for enabling IPv6
group address join/leave, join a group address on a
specific interface.
R=rsc, dave
CC=golang-dev
https://golang.org/cl/4815074
All tests enabled by default passes except those in timeout_test.go.
For TestLookupPort, add an entry for "bootps" in /lib/ndb/common
(Plan 9 calls it "bootp"). I've sent out a patch to fix this.
R=paulzhol, rsc, mikioh.mikioh
CC=ality, golang-dev
https://golang.org/cl/4779041
Multicast address handling is not consistent across all BSDs. Move
the multicast address handling code into OS dependent files. This
will be needed for OpenBSD support.
R=mikioh.mikioh, golang-dev
CC=golang-dev
https://golang.org/cl/4809074
This CL enables to list the multicast, joined group addresses
for a specific interface by using Interface.MulticastAddrs
method.
R=rsc
CC=golang-dev
https://golang.org/cl/4808062
We must keep memory used by syscall.WSARecvFrom away from
garbage collector until after overlapped call is completed.
Fixes#2094.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/4817050
Each package using struct field tags assumes that
it is the only package storing data in the tag.
This CL adds support in package reflect for sharing
tags between multiple packages. In this scheme, the
tags must be of the form
key:"value" key2:"value2"
(raw strings help when writing that tag in Go source).
reflect.StructField's Tag field now has type StructTag
(a string type), which has method Get(key string) string
that returns the associated value.
Clients of json and xml will need to be updated.
Code that says
type T struct {
X int "name"
}
should become
type T struct {
X int `json:"name"` // or `xml:"name"`
}
Use govet to identify struct tags that need to be changed
to use the new syntax.
R=r, r, dsymonds, bradfitz, kevlar, fvbommel, n13m3y3r
CC=golang-dev
https://golang.org/cl/4645069
This is a core API change.
1) gofix misc src
2) Manual adjustments to the following files under src/pkg:
gob/decode.go
rpc/client.go
os/error.go
io/io.go
bufio/bufio.go
http/request.go
websocket/client.go
as well as:
src/cmd/gofix/testdata/*.go.in (reverted)
test/fixedbugs/bug243.go
3) Implemented gofix patch (oserrorstring.go) and test case (oserrorstring_test.go)
Compiles and runs all tests.
R=r, rsc, gri
CC=golang-dev
https://golang.org/cl/4607052
This CL introduces new API into package net to identify the network
interface. A functionality of new API is very similar to RFC3493 -
"Interface Identification".
R=r, gri, bradfitz, robert.hencke, fullung, rsc
CC=golang-dev
https://golang.org/cl/4437087
Add IPv6Mreq and Inet6Pktinfo for specifying the network interface.
Rename IpMreq to IPMreq, SetsockoptIpMreq to SetsockoptIPMreq.
R=rsc, dave, robert.hencke
CC=golang-dev
https://golang.org/cl/4532098
Using the getaddrinfo order is only okay if we
are smart enough to try multiple addresses in Dial.
Since the code does not do that, we must make
the right first choice, regardless of what getaddrinfo
does, and more often that not that means using the
IPv4 address, even on IPv6 systems. With the CL
applied, gotest fails in package net on OS X.
helix.cam=; gotest
...
--- FAIL: net.TestDialGoogleIPv4 (1.05 seconds)
-- 74.125.226.179:80 --
-- www.google.com:80 --
Dial("tcp", "", "www.google.com:80") = _, dial tcp [2001:4860:800f::69]:80: address family not supported by protocol family
-- 74.125.226.179:http --
-- www.google.com:http --
Dial("tcp", "", "www.google.com:http") = _, dial tcp [2001:4860:800f::69]:80: address family not supported by protocol family
-- 074.125.226.179:0080 --
-- [::ffff:74.125.226.179]:80 --
-- [::ffff:4a7d:e2b3]:80 --
-- [0:0:0:0:0000:ffff:74.125.226.179]:80 --
-- [0:0:0:0:000000:ffff:74.125.226.179]:80 --
-- [0:0:0:0:0:ffff::74.125.226.179]:80 --
FAIL
gotest: "./6.out" failed: exit status 1
««« original CL description
net: name-based destination address selection
getaddrinfo() orders the addresses according to RFC 3484.
This means when IPv6 is working on a host we get results like:
[]string = {"2001:4810::110", "66.117.47.214"}
and when it's not working we get:
[]string = {"66.117.47.214", "2001:4810::110"}
thus can drop firstFavoriteAddr.
This also means /etc/gai.conf works on relevant systems.
R=rsc, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/4557058
»»»
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/4532101
getaddrinfo() orders the addresses according to RFC 3484.
This means when IPv6 is working on a host we get results like:
[]string = {"2001:4810::110", "66.117.47.214"}
and when it's not working we get:
[]string = {"66.117.47.214", "2001:4810::110"}
thus can drop firstFavoriteAddr.
This also means /etc/gai.conf works on relevant systems.
R=rsc, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/4557058
This CL will help to make an adaptive address family
selection possible when an any address family, vague
network string such as "ip", "tcp" or "udp" is passed
to Dial and Listen API.
Fixes#1769.
R=bradfitz, rsc
CC=golang-dev
https://golang.org/cl/4438066
On Mac X 10.6 /etc/resolv.conf is changed dynamically,
and may not exist at all when all network connections
are turned off, thus any lookup, even for "localhost"
would fail with "error reading DNS config: open
/etc/resolv.conf: no such file or directory". This
change avoids the error by trying to lookup addresses
in /etc/hosts before loading DNS config.
R=golang-dev, rsc1, rsc
CC=golang-dev
https://golang.org/cl/4431054
This CL makes it possible to resolve DNS names on OS X
without offending the Application-Level Firewall.
It also means that cross-compiling from one operating
system to another is no longer possible when using
package net, because cgo needs to be able to sniff around
the local C libraries. We could special-case this one use
and check in generated files, but it seems more trouble
than it's worth. Cross compiling is dead anyway.
It is still possible to use either GOARCH=amd64 or GOARCH=386
on typical Linux and OS X x86 systems.
It is also still possible to build GOOS=linux GOARCH=arm on
any system, because arm is for now excluded from this change
(there is no cgo for arm yet).
R=iant, r, mikioh
CC=golang-dev
https://golang.org/cl/4437053
We replace the current Open with:
OpenFile(name, flag, perm) // same as old Open
Open(name) // same as old Open(name, O_RDONLY, 0)
Create(name) // same as old Open(name, O_RDWR|O_TRUNC|O_CREAT, 0666)
This CL includes a gofix module and full code updates: all.bash passes.
(There may be a few comments I missed.)
The interesting packages are:
gofix
os
Everything else is automatically generated except for hand tweaks to:
src/pkg/io/ioutil/ioutil.go
src/pkg/io/ioutil/tempfile.go
src/pkg/crypto/tls/generate_cert.go
src/cmd/goyacc/goyacc.go
src/cmd/goyacc/units.y
R=golang-dev, bradfitzwork, rsc, r2
CC=golang-dev
https://golang.org/cl/4357052
It was left in netFD.connect() by an oversight (as the name
implies, bind has no business being in connect). As a result
of this change and by only calling netFD.connect() when ra
isn't nil it becomes simpler with less code duplication.
Additionally, if netFD.connect() fails, set sysfd to -1 to
avoid finalizers (e.g. on windows) calling shutdown on a
closed and possibly reopened socket that just happened to
share the same descriptor.
R=golang-dev, rsc1, rsc
CC=golang-dev
https://golang.org/cl/4328043
Refactored bind/connect from sock.go into netFD.connect(), as
a consequence newFD() doesn't accept laddr/raddr anymore, and
expects an (optional) call to netFD.connect() followed by a
call to netFD.setAddr().
Windows code is updated, but still uses blocking connect,
since otherwise it needs support for ConnectEx syscall.
R=brainman, rsc
CC=golang-dev
https://golang.org/cl/4303060
Drop laddr argument from Dial.
Drop cname return from LookupHost.
Add LookupIP, LookupCNAME, ParseCIDR, IP.Equal.
Export SplitHostPort, JoinHostPort.
Add AAAA (IPv6) support to host lookups.
Preparations for implementing some of the
lookups using cgo.
ParseCIDR and IP.Equal are logically new in this CL
but accidentally snuck into an earlier CL about unused
labels that was in the same client.
In crypto/tls, drop laddr from Dial to match net.
R=golang-dev, dsymonds, adg, rh
CC=golang-dev
https://golang.org/cl/4244055
With gccgo some operating systems require using select rather
than epoll or kevent. Using select means that we have to wake
up the polling thread each time we add a new file descriptor.
This implements that in the generic code rather than adding
another wakeup channel, even though nothing in the current net
package uses the capability.
R=rsc, iant2
CC=golang-dev
https://golang.org/cl/4284069
In conjunction with the non-blocking system call CL, this
gives about an 8% performance improvement on a client/server
test running on my local machine.
R=rsc, iant2
CC=golang-dev
https://golang.org/cl/4272057