generating frame information in errors will cause this
function to no longer be inlined.
Updates #29934.
Change-Id: I1d7bc11707f1872d7315f627bfb9a12afa41e358
Reviewed-on: https://go-review.googlesource.com/c/161760
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Rationale: small buffer optimization does not work and it has
made things slower since 2014. Until we can make it work,
we should prefer simpler code that also turns out to be more
efficient.
With this change, it's possible to use
NewBuffer(make([]byte, 0, bootstrapSize)) to get the desired
stack-allocated initial buffer since escape analysis can
prove the created slice to be non-escaping.
New implementation key points:
- Zero value bytes.Buffer performs better than before
- You can have a truly stack-allocated buffer, and it's not even limited to 64 bytes
- The unsafe.Sizeof(bytes.Buffer{}) is reduced significantly
- Empty writes don't cause allocations
Buffer benchmarks from bytes package:
name old time/op new time/op delta
ReadString-8 9.20µs ± 1% 9.22µs ± 1% ~ (p=0.148 n=10+10)
WriteByte-8 28.1µs ± 0% 26.2µs ± 0% -6.78% (p=0.000 n=10+10)
WriteRune-8 64.9µs ± 0% 65.0µs ± 0% +0.16% (p=0.000 n=10+10)
BufferNotEmptyWriteRead-8 469µs ± 0% 461µs ± 0% -1.76% (p=0.000 n=9+10)
BufferFullSmallReads-8 108µs ± 0% 108µs ± 0% -0.21% (p=0.000 n=10+10)
name old speed new speed delta
ReadString-8 3.56GB/s ± 1% 3.55GB/s ± 1% ~ (p=0.165 n=10+10)
WriteByte-8 146MB/s ± 0% 156MB/s ± 0% +7.26% (p=0.000 n=9+10)
WriteRune-8 189MB/s ± 0% 189MB/s ± 0% -0.16% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
ReadString-8 32.8kB ± 0% 32.8kB ± 0% ~ (all equal)
WriteByte-8 0.00B 0.00B ~ (all equal)
WriteRune-8 0.00B 0.00B ~ (all equal)
BufferNotEmptyWriteRead-8 4.72kB ± 0% 4.67kB ± 0% -1.02% (p=0.000 n=10+10)
BufferFullSmallReads-8 3.44kB ± 0% 3.33kB ± 0% -3.26% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
ReadString-8 1.00 ± 0% 1.00 ± 0% ~ (all equal)
WriteByte-8 0.00 0.00 ~ (all equal)
WriteRune-8 0.00 0.00 ~ (all equal)
BufferNotEmptyWriteRead-8 3.00 ± 0% 3.00 ± 0% ~ (all equal)
BufferFullSmallReads-8 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.000 n=10+10)
The most notable thing in go1 benchmarks is reduced allocs in HTTPClientServer (-1 alloc):
HTTPClientServer-8 64.0 ± 0% 63.0 ± 0% -1.56% (p=0.000 n=10+10)
For more explanations and benchmarks see the referenced issue.
Updates #7921
Change-Id: Ica0bf85e1b70fb4f5dc4f6a61045e2cf4ef72aa3
Reviewed-on: https://go-review.googlesource.com/133715
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
bytes.NewBuffer's documentation says it can be used to set the initial
size of the buffer. The current wording is:
> It can also be used to size the internal buffer for writing.
This may led users to believe that the buffer (its backing array) is
fixed in size and won't grow, which isn't true (subsequent Write calls
will expand the backing array as needed).
Change the doc to make it clearer that NewBuffer just sets the initial
size of the buffer.
Fixes#27242
Change-Id: I2a8cb5bee02ca2c1657ef59e2cf1434c7a9bd397
Reviewed-on: https://go-review.googlesource.com/132035
Reviewed-by: Dominik Honnef <dominik@honnef.co>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#25435
The added test fails without the re-slice and passes with it.
Change-Id: I5ebc2a737285eb116ecc5938d8bf49050652830f
GitHub-Last-Rev: 454ddad7df
GitHub-Pull-Request: golang/go#25436
Reviewed-on: https://go-review.googlesource.com/113495
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As per the comments in golang.org/cl/78617. Also leaving a comment here,
to make sure noone else thinks to re-introduce the iota like I did.
Change-Id: I2a2275998b81896eaa0e9d5ee0197661ebe84acf
Reviewed-on: https://go-review.googlesource.com/78676
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is a regression introduced in golang.org/cl/28817. That change got
rid of the iota, which meant that the type was no longer applied to all
the constant names.
Re-add the iota starting at -1, simplifying the code and adding the
types once more.
Change-Id: I38bd0e04f8d298196bccd33651e29f5011401a8d
Reviewed-on: https://go-review.googlesource.com/78617
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is only to aid in human debugging, and for that reason we maintain a panic, and not return an error.
Fixes#22097
Change-Id: If72e4d1e47ec9125ca7bc97d5fe4cedb7f76ae72
Reviewed-on: https://go-review.googlesource.com/67970
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Clean-up changes in no particular order:
- use uint8 instead of int for readOp
- remove duplicated code in ReadFrom()
- introduce (*Buffer).empty()
- remove naked returns
Change-Id: Ie6e673c20c398f980f8be0448969a36ad4778804
Reviewed-on: https://go-review.googlesource.com/42816
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In the common case, the grow method only needs to reslice the internal
buffer. Making another function call to grow can be expensive when Write
is called very often with small pieces of data (like a byte or rune).
Thus, we add a tryGrowByReslice method that is inlineable so that we can
avoid an extra call in most cases.
name old time/op new time/op delta
WriteByte-4 35.5µs ± 0% 17.4µs ± 1% -51.03% (p=0.000 n=19+20)
WriteRune-4 55.7µs ± 1% 38.7µs ± 1% -30.56% (p=0.000 n=18+19)
BufferNotEmptyWriteRead-4 304µs ± 5% 283µs ± 3% -6.86% (p=0.000 n=19+17)
BufferFullSmallReads-4 87.0µs ± 5% 66.8µs ± 2% -23.26% (p=0.000 n=17+17)
name old speed new speed delta
WriteByte-4 115MB/s ± 0% 235MB/s ± 1% +104.19% (p=0.000 n=19+20)
WriteRune-4 221MB/s ± 1% 318MB/s ± 1% +44.01% (p=0.000 n=18+19)
Fixes#17857
Change-Id: I08dfb10a1c7e001817729dbfcc951bda12fe8814
Reviewed-on: https://go-review.googlesource.com/42813
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I429637ca91f7db4144f17621de851a548dc1ce76
Reviewed-on: https://go-review.googlesource.com/34923
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In ReadRune store the size of the rune that was read into lastRead
to avoid the need to call DecodeRuneLast in UnreadRune.
fmt:
name old time/op new time/op delta
ScanInts-4 481µs ± 4% 458µs ± 3% -4.64% (p=0.000 n=20+20)
Change-Id: I500848e663a975f426402a4b3d27a541e5cac06c
Reviewed-on: https://go-review.googlesource.com/28817
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The fmt package does not use bytes.Buffer
anymore as an internal buffer.
Change-Id: I34c7a52506290ccbcb10ea2e85dea49a0a8b8203
Reviewed-on: https://go-review.googlesource.com/20511
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The tree's pretty inconsistent about single space vs double space
after a period in documentation. Make it consistently a single space,
per earlier decisions. This means contributors won't be confused by
misleading precedence.
This CL doesn't use go/doc to parse. It only addresses // comments.
It was generated with:
$ perl -i -npe 's,^(\s*// .+[a-z]\.) +([A-Z]),$1 $2,' $(git grep -l -E '^\s*//(.+\.) +([A-Z])')
$ go test go/doc -update
Change-Id: Iccdb99c37c797ef1f804a94b22ba5ee4b500c4f7
Reviewed-on: https://go-review.googlesource.com/20022
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Dave Day <djd@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Named returned values should only be used on public funcs and methods
when it contributes to the documentation.
Named return values should not be used if they're only saving the
programmer a few lines of code inside the body of the function,
especially if that means there's stutter in the documentation or it
was only there so the programmer could use a naked return
statement. (Naked returns should not be used except in very small
functions)
This change is a manual audit & cleanup of public func signatures.
Signatures were not changed if:
* the func was private (wouldn't be in public godoc)
* the documentation referenced it
* the named return value was an interesting name. (i.e. it wasn't
simply stutter, repeating the name of the type)
There should be no changes in behavior. (At least: none intended)
Change-Id: I3472ef49619678fe786e5e0994bdf2d9de76d109
Reviewed-on: https://go-review.googlesource.com/20024
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The the has been deleted.
Change-Id: I4290105435d4f1fd10c7014f913a3147ddeb3c2b
Reviewed-on: https://go-review.googlesource.com/8469
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Obtaining the actual size of the underlying storage of the buffer can
be very useful in various scenarios. Long running programs which write
and read large amounts of data to buffers might have to recycle
buffers in order to avoid holding onto potentially huge buffers.
For example, a piece of code which buffers a lot of data in a buffer
might need to release the big buffer and start again with a smaller
buffer after it finished processing the huge amount of data.
In cases where pools of bytes.Buffer are used, being able to check the
size of the allocated data can be very useful.
Instead of forking bytes.Buffer or writing new code, we can export the
Cap() method.
Change-Id: I79d4f0a3cff53b9419d82c8122964761e9e38566
Reviewed-on: https://go-review.googlesource.com/8342
Reviewed-by: Rob Pike <r@golang.org>
