In CL 349613,we have supported types.IdentityStrict() that does strict
type comparison.
Therefore, OCONVNOP becomes a possible case in call.X.Op().
Fixes#48604
Change-Id: Ibab27ffcf09656e3380314662f05f38294c1c6ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/351857
Trust: Dan Scales <danscales@google.com>
Trust: David Chase <drchase@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
For #48617
Change-Id: I6c00b7912c441ac323a0adede63b7d4a9ae6f92d
Reviewed-on: https://go-review.googlesource.com/c/go/+/351858
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
In CL 349614. we removed the early transformation code that
was needed to create the implicit CONVIFACE nodes.
Because the transformCall function is not called when translating OFUNCINST.
So we add in needed CONVIFACE nodes via typecheckaste().
Fixes#48598
Change-Id: If9dc7040cdc38ef2e52fdbb08c840095651426f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/351856
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Deal correctly with a blank local variable with type param type. This is
a special case, because a blank local variable is not in the fn.Dcl
list. In this case, we must explicitly create a new blank node with the
correct substituted type, so we have correct types if the blank local
variable has an initializing assignment.
Fixes#48602
Change-Id: I903ea44b29934e180404e32800773b7309bf297b
Reviewed-on: https://go-review.googlesource.com/c/go/+/352117
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
The delayTransform only checks whether ir.CurFunc is generic function or
not. but when compiling a non-generic closure inside a generic function,
we also want to delay the transformation, which delayTransform fails to
detect, since when ir.CurFunc is the closure, not the top level function.
Instead, we must rely on irgen.topFuncIsGeneric field to decide whether
to delay the transformation, the same logic with what is being done for
not adding closure inside a generic function to g.target.Decls list.
Fixes#48609
Change-Id: I5bf5592027d112fe8b19c92eb906add424c46507
Reviewed-on: https://go-review.googlesource.com/c/go/+/351855
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
In markType() in crawler.go, mark the type of a unexported field if it
is a fully-instantiated type, since we create and instantiate the
methods of any fully-instantiated type that we see during import. As
before, we still do not mark the type of an unexported field if that
type is not generic. Fixes#48454 and most recent issue described in
48337. The included test is similar to the case in 48454.
Fixes#48454Fixes#48337
Change-Id: I77a2a62b9e2647876facfa6f004201e8f699c905
Reviewed-on: https://go-review.googlesource.com/c/go/+/351315
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Instructions with immediates can be precomputed when operating on a
constant - do so for SLTI/SLTIU, SLLI/SRLI/SRAI, NEG/NEGW, ANDI, ORI
and ADDI. Additionally, optimise ANDI and ORI when the immediate is
all ones or all zeroes.
In particular, the RISCV64 logical left and right shift rules
(Lsh*x*/Rsh*Ux*) produce sequences that check if the shift amount
exceeds 64 and if so returns zero. When the shift amount is a
constant we can precompute and eliminate the filter entirely.
Likewise the arithmetic right shift rules produce sequences that
check if the shift amount exceeds 64 and if so, ensures that the
lower six bits of the shift are all ones. When the shift amount
is a constant we can precompute the shift value.
Arithmetic right shift sequences like:
117fc: 00100513 li a0,1
11800: 04053593 sltiu a1,a0,64
11804: fff58593 addi a1,a1,-1
11808: 0015e593 ori a1,a1,1
1180c: 40b45433 sra s0,s0,a1
Are now a single srai instruction:
117fc: 40145413 srai s0,s0,0x1
Likewise for logical left shift (and logical right shift):
1d560: 01100413 li s0,17
1d564: 04043413 sltiu s0,s0,64
1d568: 40800433 neg s0,s0
1d56c: 01131493 slli s1,t1,0x11
1d570: 0084f433 and s0,s1,s0
Which are now a single slli (or srli) instruction:
1d120: 01131413 slli s0,t1,0x11
This removes more than 30,000 instructions from the Go binary and
should improve performance in a variety of areas - of note
runtime.makemap_small drops from 48 to 36 instructions. Similar
gains exist in at least other parts of runtime and math/bits.
Change-Id: I33f6f3d1fd36d9ff1bda706997162bfe4bb859b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/350689
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Add tests for shift by constant, masked shifts and bounded shifts. While here,
sort tests by architecture and keep order of tests consistent (lsh, rshU, rsh).
Change-Id: I512d64196f34df9cb2884e8c0f6adcf9dd88b0fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/351289
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
For #33232.
Change-Id: Id95a92bfdad91e3ccde9f5654c3b1b02ca95f6ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/351731
Trust: Robert Griesemer <gri@golang.org>
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Agressively mark all LHS variables in assignments as used if there
is any error in the (entire) assignment. This reduces the number of
spurious "declared but not used" errors in programs that are invalid
in the first place. This behavior is closer to the behavior of the
compiler's original type checker (types1) and lets us remove lines
of the form "_ = variable" just to satisfy test cases. It also makes
more important errors visible by not crowding them out.
Remove the Checker.useLHS function and use Checker.use instead:
useLHS didn't evaluate top-level variables, but we actually want
them to be evaluated in an error scenario so that they are getting
used (and thus we don't get the "declared but not used" error).
Fixes#42937.
Change-Id: Idda460f6b81c66735bf9fd597c54188949bf12b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/351730
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When used with the compiler, types2 will report assignment error
messages that closely match what the compiler type checker (types1)
produces.
Also, mark lhs variables as used in invalid variable initializations
to avoid a class of follow-on errors.
Fixes#48558.
Change-Id: I92d1de006c66b3a2364bb1bea773a312963afe75
Reviewed-on: https://go-review.googlesource.com/c/go/+/351669
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Like other builtin functions, unsafe.Add's len operand is allowed to
be variable sized. However, unlike other builtins, it doesn't get
lowered to a runtime function call, so we never end up coercing it to
a specific type. As a result, we could end up constructing an OpAddPtr
value but with a less-than-ptr-sized addend operand.
This CL fixes this by always coercing the second operand to uintptr
during SSA construction.
Theoretically, we could do this during walk instead, but the frontend
doesn't allow converting negative constants to uintptr.
Fixes#48536.
Change-Id: Ib0619ea79df58b256b250fec967a6d3c8afea631
Reviewed-on: https://go-review.googlesource.com/c/go/+/351592
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Adjust types2 and go/types and some test cases.
Because `any` is not treated specially anymore in constraint
position we get additional errors in constraints if `any` is
used before Go1.18 (in addition to the error that type parameter
lists are not permitted before Go1.18).
Fixes#33232.
Change-Id: I85590c6094b07c3e494fef319e3a38d0217cf6f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/351456
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
BMI1 includes four instructions (ANDN, BLSI, BLSMSK, BLSR) that are
easy to peephole optimize, and which GCC always seems to favor using
when available and applicable.
Updates #45453.
Change-Id: I0274184057058f5c579e5bc3ea9c414396d3cf46
Reviewed-on: https://go-review.googlesource.com/c/go/+/351130
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
xml names can't have any of '[],' in them, which might appear in
generic type names. Truncate at the first '[' so the names are still valid.
Fixes#48318
Change-Id: I110ff4269f763089467e7cf84b0f0c5075fb44b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/349349
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
When going to dictionary formats derived from the function
instantiations, I had broken out noder.Assignop() to deal specially with
shape types, but didn't quite get the tricky case right. We still need
to allow conversion between shape types, but if the destination is an
interface, we need to use CONVIFACE rather than CONVNOP.
Fixes#48453.
Change-Id: I8c4b39c2e628172ac34f493f1dd682cbac1e55ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/350949
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Ensure constant shift amounts are in the range [0-31]. When shift amounts
are out of range, bad things happen. Shift amounts out of range occur
when lowering 64-bit shifts (we take an in-range shift s in [0-63] and
calculate s-32 and 32-s, both of which might be out of [0-31]).
The constant shift operations themselves still work, but their shift
amounts get copied unmolested to operations like ORshiftLL which use only
the low 5 bits. That changes an operation like <<100 which unconditionally
produces 0, to <<4, which doesn't.
Fixes#48476
Change-Id: I87363ef2b4ceaf3b2e316426064626efdfbb8ee3
Reviewed-on: https://go-review.googlesource.com/c/go/+/350969
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
As with other recent issues, the Init field of a range loop was not
being handled properly. Generally, it is much better to explicitly
import/export the Init statements, else they are incorrectly added
before the associated node, rather than as the Init value of the node.
This was causing labels to not be correctly added to the range loop that
it is immediately preceding.
Made the ORANGE handling completely similar to the OFOR handling.
Fixes#48462
Change-Id: I999530e84f9357f81deaa3dda50660061f710e7c
Reviewed-on: https://go-review.googlesource.com/c/go/+/350911
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
CL 342350 fixed panic with dead hidden closures, by marking discarded
hidden closure as dead, and won't compile them. However, the fix is
incomplete. In case the "if" or "else" block end with panic or return
statement:
if true { return }
# All nodes starts from here are dead
the dead nodes must be processed with markHiddenClosureDead, but they
are not, causing the compiler crashes.
This CL adds that missing part.
Fixes#48459
Change-Id: Ibdd10a61fc6459d139bbf4a66b0893b523ac6b67
Reviewed-on: https://go-review.googlesource.com/c/go/+/350695
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This also requires that we sometimes delay transformSelect(), if the
assignments in the Comm part of the select have not been transformed.
Fixes#48137
Change-Id: I163aa1f999d1e63616280dca807561b12b2aa779
Reviewed-on: https://go-review.googlesource.com/c/go/+/347915
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For certain type of method wrappers we used to generate a tail
call. That was disabled in CL 307234 when register ABI is used,
because with the current IR it was difficult to generate a tail
call with the arguments in the right places. The problem was that
the IR does not contain a CALL-like node with arguments; instead,
it contains an OAS node that adjusts the receiver, than an
OTAILCALL node that just contains the target, but no argument
(with the assumption that the OAS node will put the adjusted
receiver in the right place). With register ABI, putting
arguments in registers are done in SSA. The assignment (OAS)
doesn't put the receiver in register.
This CL changes the IR of a tail call to take an actual OCALL
node. Specifically, a tail call is represented as
OTAILCALL (OCALL target args...)
This way, the call target and args are connected through the OCALL
node. So the call can be analyzed in SSA and the args can be passed
in the right places.
(Alternatively, we could have OTAILCALL node directly take the
target and the args, without the OCALL node. Using an OCALL node is
convenient as there are existing code that processes OCALL nodes
which do not need to be changed. Also, a tail call is similar to
ORETURN (OCALL target args...), except it doesn't preserve the
frame. I did the former but I'm open to change.)
The SSA representation is similar. Previously, the IR lowers to
a Store the receiver then a BlockRetJmp which jumps to the target
(without putting the arg in register). Now we use a TailCall op,
which takes the target and the args. The call expansion pass and
the register allocator handles TailCall pretty much like a
StaticCall, and it will do the right ABI analysis and put the args
in the right places. (Args other than the receiver are already in
the right places. For register args it generates no code for them.
For stack args currently it generates a self copy. I'll work on
optimize that out.) BlockRetJmp is still used, signaling it is a
tail call. The actual call is made in the TailCall op so
BlockRetJmp generates no code (we could use BlockExit if we like).
This slightly reduces binary size:
old new
cmd/go 14003088 13953936
cmd/link 6275552 6271456
Change-Id: I2d16d8d419fe1f17554916d317427383e17e27f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/350145
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
There are a bunch of nodes beside ONAME and OTYPE, (such as OSTRUCTLIT
and OCOMPLIT) which can introduce a generic type that we need to mark.
So, just mark any generic type on any node in markInlBody. In this
particular issue, the type is introduced by an OSTRUCTLIT node.
Updates #48337
Change-Id: I271932518f0c1fb54d91a603e01a855c69df631d
Reviewed-on: https://go-review.googlesource.com/c/go/+/349909
Trust: Dan Scales <danscales@google.com>
Trust: Carlos Amedee <carlos@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is caused by some nodes didn't carry the real line number.
Noder1 wraps these node with ir.ParenExpr. To fix this issue,
wraps this node like what noder1 does.
Change-Id: I212cad09b93b8bf1a7adfad416d229d15711918a
Reviewed-on: https://go-review.googlesource.com/c/go/+/349769
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Keith Randall <khr@golang.org>
The variable represents the microarchitecture level for which to compile.
Valid values are v1 (default), v2, v3, v4.
Updates #45453
Change-Id: I095197fc9239d79f98896d7e745e2341354daca4
GitHub-Last-Rev: f83ed17204
GitHub-Pull-Request: golang/go#48359
Reviewed-on: https://go-review.googlesource.com/c/go/+/349595
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Bryan C. Mills <bcmills@google.com>
Move ShapePkg to types, and change types.NewNamed to automatically set
IsShape/HasShape if a type is in the shapes pkg. This means that
imported shape types will automatically have the correct
IsShape/HasShape flags, even though we are not explicitly
exporting/importing those flags.
Updates #48337
Change-Id: I8b6131a663205f73f395943c9d0c8bdb2a213401
Reviewed-on: https://go-review.googlesource.com/c/go/+/349869
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
This is a port of CL 349009 to typecheck importer.
Fixes#48306
Change-Id: Iec3f078089346bd85f0ab739896e079940325011
Reviewed-on: https://go-review.googlesource.com/c/go/+/349011
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
The importReader always reads type parameter before declaring type stub
declaration. Thus, for recursive type, the type parameter is going to be
read twice, cause the bound more than once error.
To fix this, only read the type parameter after declaring stub obj, thus
r.doDecl can see the type was already inserted and terminate the
recursive call earlier.
Fixes#48280
Change-Id: I272e2f214f739fb8ec71a8628ba297477e1b7755
Reviewed-on: https://go-review.googlesource.com/c/go/+/349009
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Fixes#48317
Change-Id: I756ae6253022870071004332dd8f49169307f7e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/349013
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
CL 345486 introduced an optimization to reflect's map accesses
which is not quite correct. We can't use the optimized code if the
value type is >128 bytes.
See cmd/compile/internal/walk/walk.go:mapfast
Fixes#48357
Change-Id: I8e3c7858693083dd4393a8de48ca5fa47bab66f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/349593
Trust: Keith Randall <khr@golang.org>
Trust: Joe Tsai <joetsai@digital-static.net>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Trust: Martin Möhrmann <martin@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
Reviewed-by: Joe Tsai <joetsai@digital-static.net>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Martin Möhrmann <martin@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Also, add the FABSS and FABSD pseudo instructions to the assembler.
The compiler could use FSGNJX[SD] directly but there doesn't seem
to be much advantage to doing so and the pseudo instructions are
easier to understand.
Change-Id: Ie8825b8aa8773c69cc4f07a32ef04abf4061d80d
Reviewed-on: https://go-review.googlesource.com/c/go/+/348989
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
In some rewrite rules for arm64 bitfield optimizations, the
bitfield lsb value and the bitfield width value are related
to datasize, some of them use datasize directly to check the
bitfield lsb value is valid, to get the bitfiled width value,
but some of them call isARM64BFMask() and arm64BFWidth()
functions. In order to be consistent, this patch changes them
all to use datasize.
Besides, this patch sorts the codegen test cases.
Run the "toolstash-check -all" command and find one inconsistent code
is as the following.
new: src/math/fma.go:104 BEQ 247
master: src/math/fma.go:104 BEQ 248
The above inconsistence is due to this patch changing the range of the
field lsb value in "UBFIZ" optimization rules from "lc+(32|16|8)<64" to
"lc<64", so that the following code is generated as "UBFIZ". The logical
of changed code is still correct.
The code of src/math/fma.go:160:
const uvinf = 0x7FF0000000000000
func FMA(a, b uint32) float64 {
ps := a+b
return Float64frombits(uint64(ps)<<63 | uvinf)
}
The new assembly code:
TEXT "".FMA(SB), LEAF|NOFRAME|ABIInternal, $0-16
MOVWU "".a(FP), R0
MOVWU "".b+4(FP), R1
ADD R1, R0, R0
UBFIZ $63, R0, $1, R0
ORR $9218868437227405312, R0, R0
MOVD R0, "".~r2+8(FP)
RET (R30)
The master assembly code:
TEXT "".FMA(SB), LEAF|NOFRAME|ABIInternal, $0-16
MOVWU "".a(FP), R0
MOVWU "".b+4(FP), R1
ADD R1, R0, R0
MOVWU R0, R0
LSL $63, R0, R0
ORR $9218868437227405312, R0, R0
MOVD R0, "".~r2+8(FP)
RET (R30)
Change-Id: I9061104adfdfd3384d0525327ae1e5c8b0df5c35
Reviewed-on: https://go-review.googlesource.com/c/go/+/265038
Trust: fannie zhang <Fannie.Zhang@arm.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
For #48301.
Change-Id: Ie5f57dcce86773c06c5140abf13a6cfff79eb323
Reviewed-on: https://go-review.googlesource.com/c/go/+/348743
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Add a missing nil check in the formatting code for expression
nodes. Matches the nil checks in the same code.
Fixes#48301.
Change-Id: Ia9bfd3535254a94996ee190b544d95e15433d252
Reviewed-on: https://go-review.googlesource.com/c/go/+/348740
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If closure in a global assignment and has a method receiver.
We should assign receiver as a global variable, not a local variable.
Fixes#48225
Change-Id: I8f65dd6e8baf66a5eff24028d28ad0a594091add
Reviewed-on: https://go-review.googlesource.com/c/go/+/348512
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
gri@ reports that types2 now correctly handles when type parameters
recursively refer back to the parameterized type, so we might as well
add tests to exercise that. Unified IR also correctly handles
importing and exporting these types, but -G=3 currently does not.
Updates #46461.
Change-Id: I272102aa08c40c980b9aeeca9f834291dfbbcc3e
Reviewed-on: https://go-review.googlesource.com/c/go/+/348738
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When an OAS node is converted to an OSELRECV2 node in tcSelect(), the
possible DCL node in the Init field was being dropped, since a
completely new node was being created and the Init field was not set. I
don't expect n.Init() to be set for the ORECV case, but the code now
deals with that too.
Fixed bug in both tcSelect() and transformSelect().
Fixes#48289
Change-Id: I09918a70f7cbaa4aa9a17546169f908a8787df15
Reviewed-on: https://go-review.googlesource.com/c/go/+/348569
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
A generic conversion might be required for when converting T->interface{}.
When stenciled with T=interface{}, then that conversion doesn't need
to do anything.
Fixes#48276
Change-Id: Ife65d01c99fbd0895cb7eec79df9e93e752b1fa5
Reviewed-on: https://go-review.googlesource.com/c/go/+/348736
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
run.go has logic for being able to run tests with various -G flags,
but not all test types (in particular, "asmcheck" tests) support
configuring non-default -G levels. The intention was that these tests
would continue running in the default mode (at the time -G=0), but at
some point it seems like we accidentally disabled them all
together (if it ever worked correctly in the first place).
Fixes#48247.
Change-Id: I13917cb0012cbe522d29b23b888de6136872ead4
Reviewed-on: https://go-review.googlesource.com/c/go/+/348671
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
CL 347529 broke the longtest builders due to missing -G=3 flag when
compiling the added test.
Change-Id: I73007801dd6871a8cf3554e957d247f5f56fd641
Reviewed-on: https://go-review.googlesource.com/c/go/+/348330
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
When reading body of inlining function, which has another inlined
function in the body, the reader still add this inlined function to
todoBodies, which it shouldn't because the inlined function was read
already.
To fix this, introduce new flag to signal that we are done construting
all functions in todoBodies, thus the addBody shouldn't add anything
to todoBodies then.
Updates #48094
Change-Id: I45105dd518f0a7b69c6dcbaf23b957623f271203
Reviewed-on: https://go-review.googlesource.com/c/go/+/347529
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In case of embedded field, if the receiver was fully instantiated, we
must use its instantiated type, instead of passing the type params of
the base receiver.
Fixes#47797Fixes#48253
Change-Id: I97613e7e669a72605137e82406f7bf5fbb629378
Reviewed-on: https://go-review.googlesource.com/c/go/+/348549
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
The codegen tests are currently skipped (see #48247). The test
added in CL 346050 did not compile because it was in the main
package but did not contain a main function. Changing the package
to 'codegen' fixes the issue.
Updates #48247.
Change-Id: I0a0eaca8e6a7d7b335606d2c76a204ac0c12e6d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/348392
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The codegen tests are currently skipped (see #48247) and the
bitfield tests do not actually compile due to a duplicate function
name (sbfiz5) added in CL 267602. Renaming the function fixes the
issue.
Updates #48247.
Change-Id: I626fd5ef13732dc358e73ace9ddcc4cbb6ae5b21
Reviewed-on: https://go-review.googlesource.com/c/go/+/348391
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This test is not executed by default (see #48247) and does not
actually pass. It was added in CL 346689. The code generation
changes made in that CL only change how instructions are assembled,
they do not actually affect the output of the compiler. This test
is unfortunately therefore invalid and will never pass.
Updates #48247.
Change-Id: I0c807e4a111336e5a097fe4e3af2805f9932a87f
Reviewed-on: https://go-review.googlesource.com/c/go/+/348390
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Added new function earlyTransformAssign() to add needed CONVIFACE nodes
due to assignments in generic functions.
Fixes#48049
Change-Id: I7cd9cee6ecf34ed2ef0743d1b17645b9f520fa00
Reviewed-on: https://go-review.googlesource.com/c/go/+/347914
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We had code in NewPtr() to set the HasTParam/HasShape flag as needed for
the cached ptr element if it wasn't set correctly based on its Elem.
This was causing the race mentioned in the issue.
But that setting code is no longer needed, as long as we call
SetRParams() soon after calling NewIncompleteNamedType(), before
creating/translating the underlying type (which we do). The
HasTParam/HasShape attribute can only come from setting of rparams or a
direct typeparam/shape somewhere in the underlying type, both of which
don't depend on recursion, etc. (as long as the rparams are set early).
Added a check that HasTParam/HasShape are set correctly for the cached
pointer/slice elems in NewPtr() and NewSlice().
Fixes#48191
Change-Id: Ide7d82efb77ae97901e75b2e6c65bd1bfc25e0ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/348089
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We should be putting a newly instantiated imported type in
Instantiate/doInst onto the instTypeList, so its methods/dictionaries
are instantiated. To do this, we needed a more general way to add a
type to instTypeList, so add NeedInstType(), analogous to
NeedRuntimeType(). This has the extra advantage that now all types
created by the type substituter are added to instTypeList without any
extra code, which was easy to forget. doInst() now correctly calls
NeedInstType().
This is a bit aggressive, since a fully instantiated type in a generic
function/method may never be used, if the generic method is never
instantiated in the local package. But it should be fairly uncommon for
a generic method to mention a fully instantiated type (but it does
happen in this bug).
Fixes both cases mentioned in the bug.
Fixed#48185
Change-Id: I19b5012dfac17e306c8005f8595a648b0ab280d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/347909
Trust: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For lazy import resolution, there's reentrancy issue with (*Named).load
method, when "t.resolve(t)" can lead us to the same named type, thus
(*Named).load is called recursively, causing the deadlock.
The main problem is that when instantinate a type, we calculate the type
hashing, including TParams. Calling t.TParams().Len() triggers the
reentrancy call to "(*Named).load".
To fix this, just not checking TParams().Len() if we are hashing.
Updates #48185
Change-Id: Ie34842d7b10fad5d11fbcf75bb1c64a89deac6b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/347534
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The most common cases:
len(s) > 0
len(s) < 1
and they can be simplified to:
len(s) != 0
len(s) == 0
Fixes#48054
Change-Id: I16e5b0cffcfab62a4acc2a09977a6cd3543dd000
Reviewed-on: https://go-review.googlesource.com/c/go/+/346050
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Now we have two functions that create names for instantiated types.
They are inconsistent when dealing with byte/rune type.
This CL makes instTypeName2 reuse the code of typecheck.InstTypeName
Fixes#48198
Change-Id: I4c216b532cba6618ef9b63fd0b76e8f1c0ed7a75
Reviewed-on: https://go-review.googlesource.com/c/go/+/347491
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This patch adds some rules to rewrite "(LeftShift (SignExtend x) lc)"
expression as "SBFIZ".
Add the test cases.
Change-Id: I294c4ba09712eeb02c7a952447bb006780f1e60d
Reviewed-on: https://go-review.googlesource.com/c/go/+/267602
Trust: fannie zhang <Fannie.Zhang@arm.com>
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The UBFX and SBFX already zero/sign extend the result. Further
zero/sign extensions are thus unnecessary as long as they leave
the top bits unaltered. This patch absorbs zero/sign extensions
into UBFX/SBFX.
Add the related test cases.
Change-Id: I7c4516c8b52d677f77bf3aaedab87c4a28056ec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/265039
Trust: fannie zhang <Fannie.Zhang@arm.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
-G=0 is in maintenance mode, so limit testing it to the longtest
builders.
Change-Id: Ie8a01866b506183d0201f2a3730377cfa663da80
Reviewed-on: https://go-review.googlesource.com/c/go/+/347298
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This CL simplifies riscv addition (add r, imm) to
(ADDI (ADDI r, imm/2), imm-imm/2) if imm is in specific ranges.
(-4096 <= imm <= -2049 or 2048 <= imm <= 4094)
There is little impact to the go1 benchmark, while the total
size of pkg/linux_riscv64 decreased by about 11KB.
Change-Id: I236eb8af3b83bb35ce9c0b318fc1d235e8ab9a4e
GitHub-Last-Rev: a2f56a0763
GitHub-Pull-Request: golang/go#48110
Reviewed-on: https://go-review.googlesource.com/c/go/+/346689
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Michael Munday <mike.munday@lowrisc.org>
ORANGE is still not inlineable now. This CL is correct only when the range statement is statically dead, and thus not counted during the inline budget check.
If we support range statements in inlining closures in the future, may require additional processing.
Fixes#48033.
Change-Id: I28f5755c28cfa27e41daef9eff2ae332059909bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/345436
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, if a test explicitly specify -G flag, if that flag conflict
with compiler default -G flag, the test will be skipped. That's the
reason CL 346469 haven't fixed the unified IR stuff, but still make the
unified builder passed.
This CL makes run.go always run the test in unified IR mode, regardless
of the explicit -G flag specified.
Updates #48094
Change-Id: I959ecaff6aca07844f0ffcf36caa60cf0747e8ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/347271
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add (temporary) syntax.AllowTypeLists mode to control the
acceptance of type lists; the compiler doesn't set it,
but existing syntax and types2 tests do so that the code
remains exercised while it exists.
Adjust various tests to use the type set notation.
Change-Id: I798e607912552db6bfe38a7cd4324b74c6bf4d95
Reviewed-on: https://go-review.googlesource.com/c/go/+/347249
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Add support to the assembler for F[N]M{ADD,SUB}[SD] instructions.
Argument order is:
OP RS1, RS2, RS3, RD
Also, add support for the FMA intrinsic to the compiler. Automatic
FMA matching is left to a future CL.
Change-Id: I47166c7393b2ab6bfc2e42aa8c1a8997c3a071b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/293030
Trust: Michael Munday <mike.munday@lowrisc.org>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
In -G=3 mode, irgen use its own generated IR, which is mis-handling of
bodyless function and declared function with //go:noescape pragma.
Fix this by adopting the same logic in noder.funcDecl, which minor
change in linkname detection.
Fixes#48097
Change-Id: Ibef921c1f75e071ca61685e0cb4543f2ee5efc7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/346470
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If the TypeParam has all the methods of an interface, allow conversions from TypeParam to interface
Fixes#47708
Change-Id: I40a82a31f6ea9354130dbe3bcfc83537094bf12c
Reviewed-on: https://go-review.googlesource.com/c/go/+/342509
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Keith Randall <khr@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Missing case types.TUNSAFEPTR in parameterizedBy().
Also realized there was the same missing case in the type substituter
(*Tsubster).Typ().
Fixes#48103
Change-Id: If71f1a6ef80932f0e2120d4c18b39a30189fd8fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/346669
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
CL 309831 fixed importing of method expressions, by re-using the same
code already have for ODOTMETH. But that code does not work with
embedded field.
To fix this, we need to calculate all methods of the receiver base type
of method expression, before looking up the selection.
Fixes#48088
Change-Id: Ia244d36a3ed0f989735eb57becdfa70a81912f57
Reviewed-on: https://go-review.googlesource.com/c/go/+/346489
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
type A [0]int
var a A
x := a[i]
Use the zero value for x instead of the "impossible" value. That lets
us at least compile code like this with -B, even though it can't
possibly run correctly.
Fixes#48092
Change-Id: Idad5cfab49e05f375c069b05addceed68a15299f
Reviewed-on: https://go-review.googlesource.com/c/go/+/346589
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
When the Defn field of a name node is not an ONAME (for a closure
variable), then it points to a body node of the same function/closure.
Therefore, we should not attempt to substitute it at the time we are
substituting the local variables. Instead, we remember a mapping from the
Defn node to the nodes that reference it, and update the Defn fields of
the copied name nodes at the time that we create the new copy of the
Defn node.
Added some comments to the Defn field of ir.Name.
Moved the Defn (and Outer code, for consistency) from namelist() to
localvar(), since Defn needs to updated for all local variables, not
just those in a closure. Fixed case where .Defn was not being set
properly in noder2 for type switches. Fixed another case where the Defn
field had to be updated during transformSelect() because the Defn node
was being completely changed to a new node.
Fixed some spacing in typeswitch2.go
Fixes#47676Fixes#48016
Change-Id: Iae70dd76575f4a647c1db79e1eba9bbe44bfc226
Reviewed-on: https://go-review.googlesource.com/c/go/+/346290
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Now that unsafe.Sizeof and friends can operate on generic parameters,
and evaluate to non-constants, we need to export/import them correctly.
Fixes#48094
Change-Id: If3ebf77255385cd5462e13fb7ced8b157ba3cf5b
Reviewed-on: https://go-review.googlesource.com/c/go/+/346469
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The existing approach (alias name stands for generic type name)
is an exception: it's the only place where a generic type could
be used without explicit instantiation. The correct solution is
currently under discussion (see proposal issue #46477).
This CL requires that the RHS of an alias type declaration be
an instantiated non-generic type. If #46477 is accepted, the
implementation will require proper representation of alias
types.
Change-Id: Ie85b923213a64f39837e56e38e14757458272b93
Reviewed-on: https://go-review.googlesource.com/c/go/+/346294
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We were using the type from the wrong Node (the partially filled-in
FUNCINST) rather than the original function node - which is pointed to
by the OFUNCINST)) to set the final fully-substituted type of the
OFUNCINST. So fixed the node reference. Also, added check so we don't do
any work at all if the OFUNCINST already has all type args filled in.
Added few extra cases to the test file issue48030.go, to cover
fully-specified type args, partially inferred type args, and fully
inferred type args.
Fixes#48030
Change-Id: If9e4f2e0514d68b9d241f30c423259133932b25b
Reviewed-on: https://go-review.googlesource.com/c/go/+/346229
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#48056
Change-Id: I13ca4caadbabf02084f66ab28b4cf0c4a3705370
Reviewed-on: https://go-review.googlesource.com/c/go/+/346049
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This issue has been fixed in https://golang.org/cl/345411Fixes: #47892
Change-Id: I13dd3814650913da065e5f24a0c61d30adb0633a
Reviewed-on: https://go-review.googlesource.com/c/go/+/345229
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Keith Randall <khr@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
storeOneLoad decompose Load that is then stored, the offset value must
be created on the same block with the Load to be dominated, otherwise,
it's unsafe if one does not dominate the other.
Fixes#48026
Change-Id: Iee5e6c5d3e1b09862afe4e65f7bcd771b4c57367
Reviewed-on: https://go-review.googlesource.com/c/go/+/345434
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Support 'type C comparable' properly by using the same logic as for
'type T error', since ErrorType and ComparableType are entirely
analogous.
Added support for 'any' type as well, as requested by Robert. (For the
future - we can't currently have 'any' anywhere other than in a
constraint.)
Fixes#47966
Change-Id: I68bd284ced9a8bfca7d2339cd576f3cb909b1b83
Reviewed-on: https://go-review.googlesource.com/c/go/+/345174
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Conversions need to allow nil through.
We do that using a CONVIFACE instead of a DOTTYPE.
Also reorganize how nonempty interfaces are handled.
For nonempty to empty, a simple CONVIFACE suffices.
For nonempty to nonempty, we need to call the runtime to get the
new itab. Use the entry from the dictionary to identify the
target interface type (if parameterized).
Fixes#47925
Change-Id: I4ffeed964318bb3e270b06f558e6ab9c5bfc7188
Reviewed-on: https://go-review.googlesource.com/c/go/+/344830
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
type I[T any] interface{}
This is an interface, but it has a type parameter.
We need to distinguish that from an interface that is not parameterized.
That means when doing type substitution on an interface with
parameters, we need to make a new one.
Same for non-empty interfaces. Even if the type parameter is not
used in any method, we sill need to make a new type.
Similar case to tstruct, above.
Change-Id: I23ad9f21d2c4ef675bf3f7d84899d9e4919d05e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/344578
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
We need to delay fillinMethods until we get to a top-level type, so we
know all the TFORW types have been filled in, and we can do the
substitutions required by fillinMethods.
Fixes#47710
Change-Id: I298de7e7753ed31a2c2b1ff04f35177a8afc7a66
Reviewed-on: https://go-review.googlesource.com/c/go/+/345149
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This problem happens when you create a new local type that uses an
imported generic type (maybe just by instantiating it), and then that
local type needed to be included as part of an export. In that case, the
imported generic type is does not have a declaration in the local
package, so it is not necessarily created in types1, so the
crawler/export doesn't work.
To fix this issue, we just need to add a call to g.obj() for the base
generic type, to make sure that it will exist if needed later in the
compilation or for the crawler during export.
Fixes#47514
Change-Id: Ie756578f07ad0007de8a88ae909cf7534a22936e
Reviewed-on: https://go-review.googlesource.com/c/go/+/345411
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
This CL configures the parser to always accept 1.18 syntax
(type parameters, type instantiations, interface elements),
even when -lang is set to an earlier release.
Instead, the type checker looks for 1.18 operations and
complains if the language version is set to an earlier
release.
Doing these checks during type checking is necessary because it
it is possible to write "generic" code using pre-1.18 syntax;
for instance, an imported generic function may be implicitly
instantiated (as in imported.Max(2, 3)), or an imported constraint
interface may be embedded in an "ordinary" interface.
Fixes#47818.
Change-Id: I83ec302b3f4ba7196c0a4743c03670cfb901310d
Reviewed-on: https://go-review.googlesource.com/c/go/+/344871
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes#47948
Change-Id: I446a9548265d195ae4d88aff6b1361474d1b6214
Reviewed-on: https://go-review.googlesource.com/c/go/+/344910
Trust: Alexander Rakoczy <alex@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Because the Align/Width of pointer types are always set when created,
CalcSize() never descends past a pointer. Therefore, we need to do
CheckSize() at every level when creating type. We need to do this for
types creates by types2-to-types1 conversion and also by type
substitution (mostly for stenciling). We also need to do
Defer/ResumeCheckSize() at the top level in each of these cases to deal
with potentially recursive types.
These changes fix issue #47929 and also allow us to remove the
special-case CheckSize() call that causes the problem for issue #47901.
Fixes#47901Fixes#47929
Change-Id: Icd8192431c145009cd6df2f4ade6db7da0f4dd3e
Reviewed-on: https://go-review.googlesource.com/c/go/+/344829
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Updates https://gcc.gnu.org/PR101994
Change-Id: I50dcb90e315792efd7d83b496034ad33b5f199e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/343874
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
For #47771
Change-Id: I99dfdd48def756bde68445b50741afd6d86b6cf2
Reviewed-on: https://go-review.googlesource.com/c/go/+/344169
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The checkptr instrumentation is currently inserted before slice
operation has validated that n <= Big. So instead of panic, checkptr
have false positive throws.
To fix this, just insert the checkptr instrumentation after the bound
checking during SSA generation.
Fixes#46938
Change-Id: I9dbf84441c711842ccc883f3654ca8766ac696d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/343972
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes#47924
Change-Id: I4325b3c4ed9d369d9ea778478285436e1b2ab08a
Reviewed-on: https://go-review.googlesource.com/c/go/+/344571
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Issues 47713 and 47877 were both due to problems with the names used for
instantiated functions/methods, which must be in sync with the names
used by types2.
- Switched to using NameString() for writing out type arguments in
instantiation names. This ensures that we are always adding the
package to type names even for the local package. Previously, we were
explicitly adding the package name for local packages, but that
doesn't handle the case when the local type is embedded inside a
pointer or slice type. By switching to NameString(), we fix#47713.
- types1 and types2 write out 'interface {' differently (vs.
'interface{') and we were already handling that. But we needed to add
similar code to handle 'struct {' vs 'struct{'. This fixes issue
#47877.
While fixing these bugs, I also moved some duplicated code (which
include some of the changes above) into a common function addTargs(). I
also moved InstType() name to subr.go, and renamed: MakeInstName ->
MakeFuncInstSym and MakeDictName -> MakeDictSym.
Also removed a couple of ".inst..inst." prefix checks which are
irrelvant now, since we don't add ".inst." anymore to function
instantiations.
Fixes#47713Fixes#47877Fixes#47922
Change-Id: I19e9a073451f3ababd8ec31b6608cd79ba8cba36
Reviewed-on: https://go-review.googlesource.com/c/go/+/344613
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This CL changes irgen to wait until all top-level declarations have
been processed before constructing any expressions or statements that
reference them. This is the same approach that typecheck used.
Mechanically, it splits varDecl and funcDecl (the two top-level
declarations that can generate/contain code) into a part that runs
immediately for constructing the ir.ONAME, and then a separate task
that runs later to handle the code.
It also adds an exprStmtOK flag to indicate when it's actually safe to
start constructing (non-trivial) expressions and statements.
Fixes#47928.
Change-Id: I51942af6823aa561d341e2ffc1142948da025fa2
Reviewed-on: https://go-review.googlesource.com/c/go/+/344649
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
Change stencil.go:getDictionaryValue() and reflect.go:getDictionary() to
reuse any existing name node that has been created for the needed global
dictionary. Otherwise, these functions may set the Def on a specific
dictionary sym to two different name nodes, which means the first node
will not satisfy the invariant 'n.Sym().Def.(*ir.Name) == n' (which is
the assertion in this issue).
Fixes#47896
Change-Id: I1e7ae1efd077a83c7878b4342feb6d28d52476cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/344609
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Includes Robert's suggested fix in validate.go to not fail on
non-constant alignof/offsetof/sizeof calls. Further changes to wait on
transforming these calls until stenciling time, when we can call
EvalConst() to evaluate them once all the relevant types are known.
Added a bunch of new tests for non-constant Sizeof/Alignof/Offsetof.
Fixes#47716
Change-Id: I469af888eb9ce3a853124d919eda753971009b3e
Reviewed-on: https://go-review.googlesource.com/c/go/+/344250
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Arrays marked noalg are created by the compiler to hold keys and values
to initialize map literals. The ssa backend creates a pointer type for
the array type when creating an OpAddr while processing the loop that
initializes the map from the arrays. The pointer type does not inherit
the noalg property but points to the noalg array type.
This causes values created through reflect of types that should be
equal to compare unequal because the noalg and alg type might be
compared and these are not the same.
A similar problem occurred in #32595 for argument arrays of defer structs.
Created #47904 to track improve noalg handling to be able to
reintroduce this optimization again.
Fixes#47068
Change-Id: I87549342bd404b98d71a3c0f33e3c169e9d4efc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/344349
Trust: Martin Möhrmann <martin@golang.org>
Run-TryBot: Martin Möhrmann <martin@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently, write barriers aren't emitted for global addresses, but they
are emitted for addresses offset of global addresses.
This CL changes IsGlobalAddr to recognize offsets of global addresses
as globals too, removing write barriers for staticuint64s based
addresses. The logic added is the same as used in IsStackAddr.
Updates #37612
Change-Id: I537579f85b9ad02987d94f3ee0b4508b90097959
Reviewed-on: https://go-review.googlesource.com/c/go/+/342129
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
If a type T has a method foo, then
var t T
var i interface{} = t.foo
The type of foo is a method type, but the type of t.foo should be a
standard function type. Make sure we always do that conversion.
Fixes#47775
Change-Id: I464ec792196b050aba1914e070a4ede34bfd0bfa
Reviewed-on: https://go-review.googlesource.com/c/go/+/343881
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
When starting a closure that needs a dictionary, copy the closure
variable to a local variable. This lets child closures capture that
dictionary variable correctly.
This is a better fix for #47684, which does not cause problems
like #47723.
Fixes#47723
Update #47684
Change-Id: Ib5d9ffc68a5142e28daa7d0d75683e7a35508540
Reviewed-on: https://go-review.googlesource.com/c/go/+/343871
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Required two changes:
- avoid creating a closure in the case where the actual receiver of an
embedded method is not generic even though the base operand of the
selector is generic. This is similar to the test suggested by wayne
zuo - I thought it was clear in buildClosure, and easier to comment.
- Propagate //go:nointerface to base generic methods and then to
instantiations.
Change-Id: If30c834e4223c2639b7f7e74d44e6087aa9ccd76
Reviewed-on: https://go-review.googlesource.com/c/go/+/344251
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Wayne Zuo <wdvxdr1123@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
This CL changes cmd/compile's -G flag's default from 0 to 3, which
enables use of the new types2 type checker and support for type
parameters. The old type checker is still available with
-gcflags=all=-G=0.
The CL also updates the regress test harness to account for the change
in default behavior (e.g., to expect known types2 changes/failures).
However, the -G=0 mode is still being tested for now.
Copy of CL 340914 by danscales@, minus the cmd/internal/objabi.AbsFile
change (handled instead by CL 343731) and rebased to master branch.
Updates #43651.
Change-Id: I1f62d6c0a3ff245e15c5c0e8f3d922129fdd4f29
Reviewed-on: https://go-review.googlesource.com/c/go/+/343732
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#46591
Change-Id: I4875092ecd7760b0cd487e793576ef7a9a569a0e
Reviewed-on: https://go-review.googlesource.com/c/go/+/343970
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
CL 324890 turned on register ABI by default on ARM64, causing neither
live.go nor live_regabi.go is run on ARM64.
This CL enables live_regabi.go test for ARM64.
Change-Id: I0c483a38b761c5a6f1fa9a5b3324b5da64907e61
Reviewed-on: https://go-review.googlesource.com/c/go/+/343531
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is used within Google's internal code repo, so getting it working
is a pre-req for enabling -G=3 by default.
Change-Id: Icbc570948c852ca09cdb2a59f778140f620244b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/343429
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Conversions to regular concrete types should not be rewritten during
stenciling.
Fixes#47740
Change-Id: I2b45e22f962dcd2e18bd6cc876ebc0f850860822
Reviewed-on: https://go-review.googlesource.com/c/go/+/342989
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
We need an extra case in convertToDictionary. In the case of an operand
which is an interface and converting to an empty interface, we don't
want to get the run-time type from the dictionary (which would be the
run-time type of the interface). We want to do a type-assert to the
empty interface.
Change-Id: I414247210168153151272fab198bfe82ad7b1567
Reviewed-on: https://go-review.googlesource.com/c/go/+/342009
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Currently, for hidden closures, we always push them to compile queue
during typechecking. If the hidden closure is discarded from the outer
function body during deadcode, any desugaring phase after deadcode won't
be applied to the closure. Thus, some un-expected OPs are passed to
downstream passes, which they can't handle, the compiler goes boom!
To fix this, we keep track of discarded hidden closures during deadcode
pass, and won't compile them then.
Fixes#47712
Change-Id: I078717d5d1f4f2fa39cbaf610cfffbb042e70ceb
Reviewed-on: https://go-review.googlesource.com/c/go/+/342350
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Capturing dictionary closure variables is ok.
Fixes#47684
Change-Id: I049c87117915e0c5a172b9665bfac2f91064b2d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/342050
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
We use "build" for tests in the main package with a main function.
We use "compile" for tests that are not in the main package.
Change-Id: I9876b55a9e4672277483fd24e69058d439c66658
Reviewed-on: https://go-review.googlesource.com/c/go/+/334329
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The first version of CL 340609 for gofrontend passed all existing tests,
but not this one.
For #42076
Change-Id: I6491e2f186091bdae140b7f7befa511806a6478a
Reviewed-on: https://go-review.googlesource.com/c/go/+/340950
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
For #47131
Change-Id: Ie2d5a2bd3dceec607544c43e6dc68bd5ea353091
Reviewed-on: https://go-review.googlesource.com/c/go/+/335172
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Change-Id: I9bba21a64d7e9f42395b6fcdf8aa3ca01cf131dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/340912
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Add the respective check and add missing bodies to tests.
Use {} as body for functions that don't return a result.
Use { panic(0) } as body for functions that return a result.
For #47069.
Change-Id: Ia5d7525c9c036baf8a955d13bff448401e08235e
Reviewed-on: https://go-review.googlesource.com/c/go/+/340911
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In the cases where we do an early call to typecheckaste() in noder to
expose CONVIFACE nodes, we need a preceding call to transformArgs().
This is needed to allow typecheckaste() to run correctly, in the case of
f(g()), where g has multiple return values.
I also cleaned up the code a bit and commented the code in Call(), and
we do the call to typecheckaste() in several more cases.
In stencil.go:stencil(), I moved the transformCall earlier for the
OCALLMETH/ODOTMETH case, just as I did in my previous CL for
OCALL/OFUNCINST. By doing this, transformArgs no longer needs to deal
with the extra dictionary args. Therefore, I was able to simply
transformArgs() to look like typecheckargs() again, and make use of
RewriteMultiValue directly.
Updates #47514
Change-Id: I49eb82ac05707e50c2e2fb03e39458a70491d406
Reviewed-on: https://go-review.googlesource.com/c/go/+/340531
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add a new dynamicType node, which is used as a case entry when
the type being switched to is generic.
Change-Id: Ice77c6f224b8fdd3ff574fdf4a8ea5f6c7ddbe75
Reviewed-on: https://go-review.googlesource.com/c/go/+/339429
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Simplify the implementation of interface conversions in the compiler.
Don't pass fields that aren't needed (the data word, usually) to the runtime.
For generics, we need to put a dynamic type in an interface. The new
dataWord function is exactly what we need (the type word will come
from a dictionary).
Change-Id: Iade5de5c174854b65ad248f35c7893c603f7be3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/340029
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
For make with a type parameter argument, the structural type of
the type parameter's constraint determines what make is making.
Change-Id: I3b48f8ce3236b7624e0638b5f5be208c5915c987
Reviewed-on: https://go-review.googlesource.com/c/go/+/339899
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Closures inside generic functions were being added to the g.target.Decls
list during noding, just like other closures. We remove generic
functions/methods from g.target.Decls, so they don't get compiled
(they're only available for export and stenciling). Most closures inside
generic functions/methods were similarly being removed from
g.target.Decls, because they have a generic parameter. But we need to
ensure no closures in generic function/methods are left remaining in
g.target.Decls, since we don't want them transformed and compiled.
So, we set a flag in (*irgen) that records when we are noding a
top-level generic function/method, and don't add any closures to
g.target.Decls when the flag is true.
Updates #47514
Change-Id: Id66b4c41d307ffa8f54cab6ce3646ade81606862
Reviewed-on: https://go-review.googlesource.com/c/go/+/340258
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This CL resolves several known issues and TODOs.
- Represent type sets with term lists and using term list abstractions.
- Represent Unions internally as a list of (syntactical) terms.
Use term operations to print terms and detect overlapping union
entries.
- Compute type sets corresponding to unions lazily, on demand.
- Adjust code throughout.
- Adjusted error check in test/typeparam/mincheck.dir/main.go
to make test pass.
Change-Id: Ib36fb7e1d343c2b6aec51d304f0f7d1ad415f999
Reviewed-on: https://go-review.googlesource.com/c/go/+/338310
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In this case, we can't use an itab for doing a bound call, since we're
converting from an interface to an interface. We do a static or dynamic
type assert in new function assertToBound().
The dynamic type assert in assertToBound() is only needed if a bound is
parameterized. In that case, we must do a dynamic type assert, and
therefore need a dictionary entry for the type bound (see change in
getGfInfo). I'm not sure if we can somehow limit this case, since using
an interface as a type arg AND having the type bound of the type
arg be parameterized is a very unlikely case.
Had to add the TUNION case to parameterizedBy1() (which is only used for
extra checking).
Added a bunch of these test cases to 13.go, which now passes.
Change-Id: Ic22eed637fa879b5bbb46d36b40aaad6f90b9d01
Reviewed-on: https://go-review.googlesource.com/c/go/+/339898
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Put shape types in the top level package called ".shape".
Name them using the serialization of the shape name, instead of
the .shapeN names.
This allows the linker to deduplicate instantiations across packages.
Not sure that this is entirely correct, as shapes in this package
may reference other packages (e.g. a field of a struct). But it seems
to work for now.
For the added test, when you look at the resulting binary (use the -k
option with run.go) it has only one instantiation of F, and 4 call sites:
$ objdump -d a.exe | grep _a\.F
1053cb0: e8 8b 00 00 00 callq 139 <_a.F[.shape.*uint8]>
1053ce9: e8 52 00 00 00 callq 82 <_a.F[.shape.*uint8]>
_a.F[.shape.*uint8]:
1053d90: e8 ab ff ff ff callq -85 <_a.F[.shape.*uint8]>
1053dc9: e8 72 ff ff ff callq -142 <_a.F[.shape.*uint8]>
Change-Id: I627f7e50210aabe4a10d0e2717d87b75ac82e99b
Reviewed-on: https://go-review.googlesource.com/c/go/+/339595
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Previously, softfloat mode does not work with register ABI, mainly
because the compiler doesn't know how to pass floating point
arguments and results. According to the ABI it should be passed in
FP registers, but there isn't any in softfloat mode.
This CL makes it work. When softfloat is used, we define the ABI
as having 0 floating point registers (because there aren't any).
The integer registers are unchanged. So floating point arguments
and results are passed in memory.
Another option is to pass (the bit representation of) floating
point values in integer registers. But this complicates things
because it'd need to reorder integer argument registers.
Change-Id: Ibecbeccb658c10a868fa7f2dcf75138f719cc809
Reviewed-on: https://go-review.googlesource.com/c/go/+/327274
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Except unsafe.Pointer. It has a different Kind, which makes it trickier.
Change-Id: I12582afb6e591bea35da9e43ac8d141ed19532a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/338749
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
First baby step to sharing the underlying implementation among several types.
Change-Id: I6a156176d2b7f0131a87285a03b881ce380c26ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/338610
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Rewrite a method expression such as 'T.String' (where T is type param
and String is part of its type bound Stringer) as:
func(rcvr T, other params...) {
return Stringer(rcvr).String(other params...)
}
New function buildClosure2 to create the needed closure. The conversion
Stringer(rcvr) uses the dictionary in the outer function.
For a method expression like 'Test[T].finish' (where finish is a method
of Test[T]), we can already deal with this in buildClosure(). We just
need fix transformDot() to allow the method lookup to fail, since shapes
have no methods on them. That's fine, since for any instantiated
receiver type, we always use the methods on the generic base type.
Also removed the OMETHEXPR case in the main switch of node(), which
isn't needed any (and removes one more potential unshapify).
Also, fixed two small bugs with handling closures that have generic
params or generic captured variables. Need to set the instInfo for the
closure in the subst struct when descending into a closure during
genericSubst() and was missing initializing the startItabConv and gfInfo
fields in the closure info.
Change-Id: I6dadedd1378477936a27c9c544c014cd2083cfb7
Reviewed-on: https://go-review.googlesource.com/c/go/+/338129
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Introduce new dynamic dottype operations which take a dynamic
instead of static type to convert to.
Change-Id: I5824a1fea056fe811b1226ce059e1e8da1baa335
Reviewed-on: https://go-review.googlesource.com/c/go/+/337609
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This CL renames blank functions in the test/ directory so that they
don't rely on the compiler doing anything more than typechecking them.
In particular, I ran this search to find files that used blank
functions and methods:
$ git grep -l '^func.*\b_(' | xargs grep -n '^' | grep '\.go:1:' | grep -v '// errorcheck$'
I then skipped updating a few files:
* blank.go
* fixedbugs/issue11699.go
* fixedbugs/issue29870.go
These tests specifically check that blank functions/methods work.
* interface/fail.go
Not sure the motivation for the blank method here, but it's empty
anyway.
* typeparam/tparam1.go
Type-checking test, but uses "-G" (to use types2 instead of typecheck).
Updates #47446.
Change-Id: I9ec1714f499808768bd0dcd7ae6016fb2b078e5e
Reviewed-on: https://go-review.googlesource.com/c/go/+/338094
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
We don't usually reformat the test directory, but all of the files in
test/typeparam are syntactically valid. I suspect the misformattings
here are because developers aren't re-installing gofmt with
-tags=typeparams, not intentionally exercising non-standard
formatting.
Change-Id: I3767d480434c19225568f3c7d656dc8589197183
Reviewed-on: https://go-review.googlesource.com/c/go/+/338093
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fix the cons.go missing method error. Mark all the methods of
instantiated interface types as used. We could try to record all the
exact methods used for generic interface types, but for now, just mark
all the methods as used so that their methods are not dead-code
eliminated.
Change-Id: I35685eda82476244371379b97691a1b8506ef0f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/337349
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Change-Id: I5eb03ae349925f0799dd866e207221429bc9fb3c
Reviewed-on: https://go-review.googlesource.com/c/go/+/337353
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This is a partial port of https://golang.org/cl/330629, containing
only the actual bug fix and adjustements to another test file.
The respective test case has not been ported yet as it requires
some bigger adjustments.
For #46905
Change-Id: Ibd20658b8a31855da20cf56e24bcce9560656ca0
Reviewed-on: https://go-review.googlesource.com/c/go/+/336350
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Conflicts:
- src/cmd/compile/internal/ssagen/ssa.go
CL 336629 touched code that had already been removed on dev.typeparams.
Merge List:
+ 2021-07-26 ecaa6816bf doc: clarify non-nil zero length slice to array pointer conversion
+ 2021-07-26 1868f8296e crypto/x509: update iOS bundled roots to version 55188.120.1.0.1
+ 2021-07-25 849b791129 spec: use consistent capitalization for rune literal hex constants
+ 2021-07-23 0914646ab9 doc/1.17: fix two dead rfc links
+ 2021-07-22 052da5717e cmd/compile: do not change field offset in ABI analysis
Change-Id: Ie570ec3f6a3241e0495e39e8a73b3a09a9368605
This CL changes fixedbugs/issue30862.go into a "runindir" test so that
it can use '-goexperiment fieldtrack' and test that //go:nointerface
works with cmd/compile. In particular, this revealed that -G=3 and
unified IR did not handle it correctly.
This CL also fixes unified IR's support for //go:nointerface and adds
a test that checks that //go:nointerface, promoted methods, and
generics all interact as expected.
Updates #47045.
Change-Id: Ib8acff8ae18bf124520d00c98e8915699cba2abd
Reviewed-on: https://go-review.googlesource.com/c/go/+/332611
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
HasShape needs a TINTER case.
Add a test for x.(T) in various situations. Needs the fix above.
Also remove ONEW unshapify case. It is ok for ONEW to have a shape
type, as it will just be passed to mallocgc, or possibly used as a
stack object type, both of which are ok.
Change-Id: Ibddf8f5c8c254d32cb5ebcaca7dc94b4c00ab893
Reviewed-on: https://go-review.googlesource.com/c/go/+/337231
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Fixes -G=3 issue with issue44688.go.
Change-Id: Ie98c0cbd48683dedd115332043f14c8f3160f46c
Reviewed-on: https://go-review.googlesource.com/c/go/+/337029
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
This fix the case where a type param or derived type is converted to a
non-empty interface. Previously, we were converting to an empty
interface and then using DOTTYPE to convert to the correct non-empty
interface. In that case, we can get the needed itab directly from the
dictionary. This is needed for correctness from shapes, if the
destination interface is parameterized, else we will incorrectly convert
to the shape version of the interface.
Creating/writing an itab can involve generating wrappers for a bunch of
methods, which may use dictionaries. So, all the
dictionaries/instantiations are being generated on the fly and have
recursive relationships, it is simplest to finish creating/writing the
itabs at the end of the stenciling phase. So, we create a list of the
dictionaries which need to be completed by writing out their itab
entries.
The existing tests ordered.go, ifaceconv.go, and issue44688.go make use
of this optimization.
Got itab conversions for bound calls working, except for 13.go.
Also, want to get rid of the concretify, but I think we need more info
on the Bound from types2.
Change-Id: If552958a7b8a435500d6cc42c401572c367b30d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/336993
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, the ABI analysis assigns parameter/result offsets
to the fields of function *Type. In some cases, we may have
an ABI0 function reference and an ABIInternal reference share
the same function *Type. For example, for an ABI0 function F,
"f := F" will make f and (ABI0) F having the same *Type. But f,
as a func value, should use ABIInternal. Analyses on F and f will
collide and cause ICE.
Also, changing field offsets in ABI analysis has to be done very
carefully to avoid data races. It has been causing
trickiness/difficulty.
This CL removes the change of field offsets in ABI analysis
altogether. The analysis result is stored in ABIParamAssignment,
which is the only way to access parameter/result stack offset now.
Fixes#47317.
Fixes#47227.
Change-Id: I23a3e081a6cf327ac66855da222daaa636ed1ead
Reviewed-on: https://go-review.googlesource.com/c/go/+/336629
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Than McIntosh <thanm@google.com>
CL 330670 simplified usemethod, but dropped the previous condition to
ensure the function have 1 or 2 result. This CL restore that condition,
and also add a test for it.
Change-Id: I434e3736785b43ceea0b386d8d9d01ad78a4ccd2
Reviewed-on: https://go-review.googlesource.com/c/go/+/336609
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL makes two related changes:
1. It uses 'go env -json' to query the environment configuration,
rather than attempting to manually reconstruct the values that cmd/go
is going to use.
2. It changes the -goexperiment flag to *extend* any ambient
GOEXPERIMENT configuration. Notably, this means that '-goexperiment
fieldtrack' now tests fieldtracking in conjunction with any other
experiments (e.g., unified IR). Tests that want to test an exact
GOEXPERIMENT config should use '-goexperiment none,foo' instead.
Change-Id: I96a97198209e540e934fe7035110c3ae3a8f0e6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/332610
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Removed a case in transformCall() where we were setting a type on n,
which isn't needed, since noder2 already set the type of n. More
importantly, we are losing information, since the type of the results
may be a shape type, but the actual type of call is the known type
from types2, which may be a concrete type (in this case Zero[MyInt]).
That concrete type will then be used correctly if the concrete result is
converted to an interface.
If we are inlining the call to Zero[MyInt], we need to add an implicit
CONVNOP operation, since we are going to use the result variable
directly, which has a shape type. So, add an implicit CONVNOP to
remember that the known type is the concrete type.
Also cleaned up 14.go a bit, so it is more understandable. Renamed type
T to AnyInt, since T is used elsewhere as a type parameter. Reformatted
Zero function and added a comment.
Change-Id: Id917a2e054e0bbae9bd302232853fa8741d49b64
Reviewed-on: https://go-review.googlesource.com/c/go/+/336430
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
METHVALUE in a generic function (that is not called) was not causing
buildClosure() to be called and therefore not using dictionaries. Also,
had to add an extra check to make sure that if we have a FUNCINST
node above a METHVALUE, we only call buildClosure once.
Change-Id: I49756152fc343e5ac1c449e697960fc2a0f482ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/336429
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
types2 will have already proved the expression's type is compatible, so
just assign the one const to have the same type as the operand.
Fixes#47258.
Change-Id: If0844e6bf6d0a5e6b11453b87df71353863ccc5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/336009
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
The builtins.go test is derived from
cmd/compile/internal/types2/testdata/check/builtins.go2, after removing
the error cases. Added a few extra tests for len/cap/append.
Fixed one bug, which is that DELETE operations can't be transformed if
their argument is a typeparam. Also, the tranform of LEN/CAP calls does
not need to be delayed. Removed out-date references to the old
typechecker in the comments.
Change-Id: If7a21506a7ff63ff7c8e87ccd614ef4ff3a0d3c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/336010
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
We'll have to revisit eventually, but disabling for now.
Change-Id: Ic34cfe451939d61884079bb125b9290db1e05e47
Reviewed-on: https://go-review.googlesource.com/c/go/+/335829
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
CL 330330 moved logic for wrapping go/defer from order to esacpe
analysis. It introduced a bug involves go/defer statement with ABI0
functions.
Consider this following code:
package p
//go:cgo_unsafe_args
func g(*int) (r1 struct{}) {
return
}
func f() {
defer g(new(int))
}
g is a cgo-like generated function with ABI0. While compiling g, we set
the offset per ABI0.
The function f is rewritten into:
func f() {
_0, _1 := g, new(int)
defer func() { _0(_1) }()
}
The temporary _0 hold function value with the same type as g, but with
class PAUTO. Thus ssagen/ssa.go:state.call cannot handle it and use
ABIDefault to set the offset, causes the offset of r1 changed
CL 330332 intended to optimize code generated for wrapping function, by
rewriting the wrapper function into:
func f() {
_0 := new(int)
defer func() { g(_0) }()
}
So it fixed the bug unintentionally.
This CL add regression test for this bug, and also add a comment to
explain while not wrapping declared function is important.
Updates #47227
Change-Id: I75c83d1d9cc7fd4699e6b218a295d0c0a10ef471
Reviewed-on: https://go-review.googlesource.com/c/go/+/334882
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In CL 326211 a change was made to switch "go.map.zero" symbols from
non-pkg DUPOK symbols to hashed symbols. The intent of this change was
ensure that in cases where there are multiple competing go.map.zero
symbols feeding into a link, the largest map.zero symbol is selected.
The change was buggy, however, and resulted in duplicate symbols in
the final binary (see bug cited below for details). This duplication
was relatively benign for linux/ELF, but causes duplicate definition
errors on Windows.
This patch switches "go.map.zero" symbols back from hashed symbols to
non-pkg DUPOK symbols, and updates the relevant code in the loader to
ensure that we do the right thing when there are multiple competing
DUPOK symbols with different sizes.
Fixes#47185.
Change-Id: I8aeb910c65827f5380144d07646006ba553c9251
Reviewed-on: https://go-review.googlesource.com/c/go/+/334930
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
