Update references missed in CL 263142.
For #41190
Change-Id: I778760a6a69bd0440fec0848bdef539c9ccb4ee1
GitHub-Last-Rev: dda42b09ff
GitHub-Pull-Request: golang/go#42874
Reviewed-on: https://go-review.googlesource.com/c/go/+/273946
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Zhang <cherryyz@google.com>
In the linker's deadcode pass we decode type symbols for
interface satisfaction analysis. When linking against Go shared
libraries, the type symbol may come from a shared library, so it
doesn't have data in the current module being linked, so we cannot
decode it. We already have code to skip DYNIMPORT symbols. However,
this doesn't actually work, because at that point the type symbols'
names haven't been mangled, whereas they may be mangled in the
shared library. So the symbol definition (in shared library) and
reference (in current module) haven't been connected.
Skip decoding type symbols of type Sxxx (along with DYNIMPORT)
when linkShared.
Note: we cannot skip all type symbols, as we still need to mark
unexported methods defined in the current module.
Fixes#44031.
Change-Id: I833d19a060c94edbd6fc448172358f9a7d760657
Reviewed-on: https://go-review.googlesource.com/c/go/+/288496
Trust: Cherry Zhang <cherryyz@google.com>
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
During the transitioning period, we mark symbols from Go shared
libraries reachable unconditionally. That might be useful when
there was still a large portion of the linker using sym.Symbols,
and only reachable symbols were converted to sym.Symbols. Marking
them reachable brings them to the dynamic symbol table, even if
they are not needed, increased the binary size unexpectedly.
That time has passed. Now we largely operate on loader symbols,
and it is not needed to mark them reachable anymore.
Fixes#40416.
Change-Id: I1e2bdb93a960ba7dc96575fabe15af93d8e95329
Reviewed-on: https://go-review.googlesource.com/c/go/+/244839
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When linking against a Go shared library, when a global variable
in the main module has a type defined in the shared library, the
linker needs to pull the GC data from the shared library to build
the GC program for the global variable. Currently, this fails
silently, as the shared library file is closed too early and the
read failed (with no error check), causing a zero GC map emitted
for the variable, which in turn causes the runtime to treat the
variable as pointerless.
For now, fix this by keeping the file open. In the future we may
want to use mmap to read from the shared library instead.
Also add error checking. And fix a (mostly harmless) mistake in
size caluculation.
Also remove an erroneous condition for ARM64. ARM64 used to have
a special case to get the addend from the relocation on the
gcdata field. That was removed, but the new code accidentally
returned 0 unconditionally. It's no longer necessary to have any
special case, since the addend is now applied directly to the
gcdata field on ARM64, like on all the other platforms.
Fixes#39927.
This is the second attempt of CL 240462. And this reverts
CL 240616.
Change-Id: I01c82422b9f67e872d833336885935bc509bc91b
Reviewed-on: https://go-review.googlesource.com/c/go/+/240621
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This reverts CL 240462.
Reason for revert: test fails on PPC64LE.
Updates #39927.
Change-Id: I4f14fd0c36e604a80ae9f2f86d1e643e28945e93
Reviewed-on: https://go-review.googlesource.com/c/go/+/240616
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
When linking against a Go shared library, when a global variable
in the main module has a type defined in the shared library, the
linker needs to pull the GC data from the shared library to build
the GC program for the global variable. Currently, this fails
silently, as the shared library file is closed too early and the
read failed (with no error check), causing a zero GC map emitted
for the variable, which in turn causes the runtime to treat the
variable as pointerless.
For now, fix this by keeping the file open. In the future we may
want to use mmap to read from the shared library instead.
Also add error checking. And fix a (mostly harmless) mistake in
size caluculation.
Also remove an erroneous condition for ARM64. ARM64 used to have
a special case to get the addend from the relocation on the
gcdata field. That was removed, but the new code accidentally
returned 0 unconditionally. It's no longer necessary to have any
special case, since the addend is now applied directly to the
gcdata field on ARM64, like on all the other platforms.
Fixes#39927.
Change-Id: Iecd32315b326c7059587fdc190e2fa99426e497e
Reviewed-on: https://go-review.googlesource.com/c/go/+/240462
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Normally, packages are loaded in dependency order, and if a
Library object is not nil, it is already loaded with the actual
fingerprint. In shared build mode, however, packages may be added
not in dependency order (e.g. go install -buildmode=shared std
adds all std packages before loading them), and it is possible
that a Library's fingerprint is not yet loaded. Skip the check
in this case (when the fingerprint is the zero value).
Fixes#39777.
Change-Id: I66208e92bf687c8778963ba8e33e9bd948f82f3a
Reviewed-on: https://go-review.googlesource.com/c/go/+/239517
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Trace output showing how dummy GOROOT was being set up was incorrect
(sense of the "cp -r" trace messages was inverted). This patch fixes
the problem.
Change-Id: Ib0ee649e305bfa1bc0c49e0d5ba2ea31e0a4f67e
Reviewed-on: https://go-review.googlesource.com/c/go/+/224377
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If GOBIN is set in the GOENV file, then merely unsetting it in the
process environment is not sufficient. We can instead either set GOBIN
explicitly, or disable GOENV explicitly. For now, we (semi-arbitrary)
choose the former.
Fixes#37390
Change-Id: Iec54532c804b70546d695105cd89e9169eac5dbb
Reviewed-on: https://go-review.googlesource.com/c/go/+/220652
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead of installing shared libraries to GOROOT/pkg, clone the
necessary files into a new GOROOT and run there.
Given that we now have a build cache, ideally we should not need to
install into GOROOT/pkg at all, but we can't fix that during the 1.14
code freeze.
Updates #28387
Updates #28553
Updates #30316
Change-Id: I83084a8ca29a5dffcd586c7fccc3f172cac57cc6
Reviewed-on: https://go-review.googlesource.com/c/go/+/208482
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, 'go test -v' in this directory would result in a massive
dump of go command output, because the test plumbed -v to 'build -x'.
This change separates them into distinct flags, so that '-v' only
implies the display of default 'go' command output.
Updates #30316
Change-Id: Ifb125f35ec6a0bebe7e8286e7c546d132fb213df
Reviewed-on: https://go-review.googlesource.com/c/go/+/208232
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These functions are compiler generated, and as such are only available
in the internal ABI. Doing this avoids generating an alias symbol.
Doing that avoids confusion between unmangled and mangled type symbols.
Fixes#30768
Change-Id: I197a5ba6403aac11989ffa951dbe35bd0506de91
Reviewed-on: https://go-review.googlesource.com/c/go/+/186077
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
I hope that this will fix the tests on iOS, but 'gomote create' isn't
giving me an instance I can test with. (Please patch and test before
approving.)
Updates #15919
Updates #30228
Change-Id: I1b7cd30d5b127a1ad3243b329fa005d229f69a24
Reviewed-on: https://go-review.googlesource.com/c/163726
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <mail@eliasnaur.com>
The vet action assumes that a.Deps[0] is the compilation action for
which vet information should be generated. However, when using
-linkshared, the action graph is built with a ModeBuggyInstall action
to install the shared library built from the compilation action.
Adjust the set up of the vet action accordingly. Also don't clean up
the working directory after completing the buggy install.
Updates #26400
Change-Id: Ia51f9f6b8cde5614a6f2e41b6207478951547770
Reviewed-on: https://go-review.googlesource.com/124275
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If X depends on Y and X was installed but Y is only present in the cache
(as happens when you "go install X") then we should report X as up-to-date,
not as stale.
This applies whether X is a package or a main binary.
Fixes#24558.
Fixes#23818.
Change-Id: I26a0b375b1f7f7ac909cc0db68e92f4e04529208
Reviewed-on: https://go-review.googlesource.com/107957
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
After CL 69831, addTransitiveLinkDeps ensures that all dependencies of
a link appear in Deps. We no longer need to traverse through all
actions to find them. And the old scheme of looking through all the
actions and assuming we would see shared library actions before
libraries they depend on no longer works.
Now that we have complete deps, change to a simpler scheme in which we
find the shared libraries in the deps, and then use that to sort the
deps into archives and shared libraries.
Fixes#22224
Change-Id: I14fcc773ac59b6f5c2965cc04d4ed962442cc89e
Reviewed-on: https://go-review.googlesource.com/87497
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This CL adds an automatic, limited "go vet" to "go test".
If the building of a test package fails, vet is not run.
If vet fails, the test is not run.
The goal is that users don't notice vet as part of the "go test"
process at all, until vet speaks up and says something important.
This should help users find real problems in their code faster
(vet can just point to them instead of needing to debug a
test failure) and expands the scope of what kinds of things
vet can help with.
The "go vet" runs in parallel with the linking of the test binary,
so for incremental builds it typically does not slow the overall
"go test" at all: there's spare machine capacity during the link.
all.bash has less spare machine capacity. This CL increases
the time for all.bash on my laptop from 4m41s to 4m48s (+2.5%)
To opt out for a given run, use "go test -vet=off".
The vet checks used during "go test" are a subset of the full set,
restricted to ones that are 100% correct and therefore acceptable
to make mandatory. In this CL, that set is atomic, bool, buildtags,
nilfunc, and printf. Including printf is debatable, but I want to
include it for now and find out what needs to be scaled back.
(It already found one real problem in package os's tests that
previous go vet os had not turned up.)
Now that we can rely on type information it may be that printf
should make its function-name-based heuristic less aggressive
and have a whitelist of known print/printf functions.
Determining the exact set for Go 1.10 is #18085.
Running vet also means that programs now have to type-check
with both cmd/compile and go/types in order to pass "go test".
We don't start vet until cmd/compile has built the test package,
so normally the added go/types check doesn't find anything.
However, there is at least one instance where go/types is more
precise than cmd/compile: declared and not used errors involving
variables captured into closures.
This CL includes a printf fix to os/os_test.go and many declared
and not used fixes in the race detector tests.
Fixes#18084.
Change-Id: I353e00b9d1f9fec540c7557db5653e7501f5e1c9
Reviewed-on: https://go-review.googlesource.com/74356
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL changes the go command to base all its rebuilding decisions
on the content of the files being processed and not their file system
modification times. It also eliminates the special handling of release
toolchains, which were previously considered always up-to-date
because modification time order could not be trusted when unpacking
a pre-built release.
The go command previously tracked "build IDs" as a backup to
modification times, to catch changes not reflected in modification times.
For example, if you remove one .go file in a package with multiple .go
files, there is no modification time remaining in the system that indicates
that the installed package is out of date. The old build ID was the hash
of a list of file names and a few other factors, expected to change if
those factors changed.
This CL moves to using this kind of build ID as the only way to
detect staleness, making sure that the build ID hash includes all
possible factors that need to influence the rebuild decision.
One such factor is the compiler flags. As of this CL, if you run
go build -gcflags -N cmd/gofmt
you will get a gofmt where every package is built with -N,
regardless of what may or may not be installed already.
Another such factor is the linker flags. As of this CL, if you run
go install myprog
go install -ldflags=-s myprog
the second go install will now correctly build a new myprog with
the updated linker flags. (Previously the installed myprog appeared
up-to-date, because the ldflags were not included in the build ID.)
Because we have more precise information we can also validate whether
the target of a "go test -c" operation is already the right binary and
therefore can avoid a rebuild.
This CL sets us up for having a more general build artifact cache,
maybe even a step toward not having a pkg directory with .a files,
but this CL does not take that step. For now the result of go install
is the same as it ever was; we just do a better job of what needs to
be installed.
This CL does slow down builds a small amount by reading all the
dependent source files in full. (The go command already read the
beginning of every dependent source file to discover build tags
and imports.) On my MacBook Pro, before this CL all.bash takes
3m58s, while after this CL and a few optimizations stacked above it
all.bash takes 4m28s. Given that CL 73850 cut 1m43s off the all.bash
time earlier today, we can afford adding 30s back for now.
More optimizations are planned that should make the go command
more efficient than it was even before this CL.
Fixes#15799.
Fixes#18369.
Fixes#19340.
Fixes#21477.
Change-Id: I10d7ca0e31ca3f58aabb9b1f11e2e3d9d18f0bc9
Reviewed-on: https://go-review.googlesource.com/73212
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The upcoming CL 73212 will see through mtime modifications.
Change the underlying file too.
Change-Id: Ib23b4136a62ee87bce408b76bb0385451ae7dcd2
Reviewed-on: https://go-review.googlesource.com/74130
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Everything got a bit tangled together in b.action1.
Try to tease things apart again.
In general this is a refactoring of the existing code, with limited
changes to the effect of the code.
The main additional change is to complete a.Deps for link actions.
That list now directly contains all the inputs the linker will attempt
to read, eliminating the need for a transitive traversal of the entire
action graph to find those. The comepleteness of a.Deps will be
important when we eventually use it to decide whether an cached
action output can be reused.
all.bash passes, but it's possible I've broken some subtety of
buildmode=shared again. Certainly that code took the longest
to get working.
Change-Id: I34e849eda446dca45a9cfce02b07bec6edb6d0d4
Reviewed-on: https://go-review.googlesource.com/69831
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is a step toward using cached build artifacts: the importcfg
will direct the compiler and linker to read them right from the cache
if necessary. However, this CL does not have a cache yet, so it still
reads them from the usual install location or build location.
Even so, this fixes a long-standing issue that -I and -L (no longer used)
are not expressive enough to describe complex GOPATH setups.
Shared libraries are handled enough that all.bash passes, but
there may still be more work to do here. If so, tests and fixes
can be added in follow-up CLs.
Gccgo will need updating to support -importcfg as well.
Fixes#14271.
Change-Id: I5c52a0a5df0ffbf7436e1130c74e9e24fceff80f
Reviewed-on: https://go-review.googlesource.com/56279
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When rewriting loads and stores accessing global variables to use the
GOT we were making use of REGTMP (R10). Unfortunately loads and stores
with large offsets (larger than 20-bits) were also using REGTMP,
causing it to be clobbered and subsequently a segmentation fault.
This can be fixed by using REGTMP2 (R11) for the rewrite. This is fine
because REGTMP2 only has a couple of uses in the assembler (division,
high multiplication and storage-to-storage instructions). We didn't
use REGTMP2 originally because it used to be used more frequently,
in particular for stores of constants to memory. However we have now
eliminated those uses.
This was found while writing a test case for CL 63030. That test case
is included in this CL.
Change-Id: I13956f1f3ca258a7c8a7ff0a7570d2848adf7f68
Reviewed-on: https://go-review.googlesource.com/65011
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Otherwise, some test flags don't work.
Change-Id: Iacf3930d0eec28e4d690cd382adbb2ecf866a0e2
Reviewed-on: https://go-review.googlesource.com/55615
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously the "ABI hash" for a package (used to determine if a loaded shared
library has the ABI expected by its loader) was the hash of the entire
__.PKGDEF file. But that means it depends on the build ID generated by the go
tool for the package, which means that if a file is added (even a .c or .h
file!) to the package, the ABI changes, perhaps uncessarily.
Fixes#19920
Change-Id: If919481e1a03afb350c8a9c7a0666bb90ee90270
Reviewed-on: https://go-review.googlesource.com/40401
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The hardware divider is an optional component of ARMv7. This patch
detects whether it is available in runtime and use it or not.
1. The hardware divider is detected at startup and a flag is set/clear
according to a perticular bit of runtime.hwcap.
2. Each call of runtime.udiv will check this flag and decide if
use the hardware division instruction.
A rough test shows the performance improves 40-50% for ARMv7. And
the compatibility of ARMv5/v6 is not broken.
fixes#19118
Change-Id: Ic586bc9659ebc169553ca2004d2bdb721df823ac
Reviewed-on: https://go-review.googlesource.com/37496
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TestMain doesn't make use of any flags.
Change-Id: I98ec582fb004045a5067618f605ccfeb1f9f4bbb
Reviewed-on: https://go-review.googlesource.com/33613
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the same type and itab generated in two
different shared library are actually the same thing.
Change-Id: Ica45862d65ff8bc7ad04d59a41f57223f71224cd
Reviewed-on: https://go-review.googlesource.com/35115
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
main.main and main.init were not being marked as reachable.
Fixes#17076
Change-Id: Ib3e29bd35ba6252962e6ba89173ca321ed6849b9
Reviewed-on: https://go-review.googlesource.com/28996
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This time with the cherry-pick from the proper patch of
the old CL.
Stack size increased.
Corrected NaN-comparison glitches.
Marked g register as clobbered by calls.
Fixed shared libraries.
live_ssa.go still disabled because of differences.
Presumably turning on more optimization will fix
both the stack size and the live_ssa.go glitches.
Enhanced debugging output for shared libs test.
Rebased onto master.
Updates #16010.
Change-Id: I40864faf1ef32c118fb141b7ef8e854498e6b2c4
Reviewed-on: https://go-review.googlesource.com/27159
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Consider three shared libraries:
libBase.so -- defines a type T
lib2.so -- references type T
lib3.so -- also references type T, and something from lib2
lib2.so will contain a type symbol for T in its symbol table, but no
definition. If, when linking lib3.so the linker reads the symbols from lib2.so
before libBase.so, the linker didn't read the type data and later crashed.
The fix is trivial but the test change is a bit messy because the order the
linker reads the shared libraries in ends up depending on the order of the
import statements in the file so I had to rename one of the test packages so
that gofmt doesn't fix the test by accident...
Fixes#15516
Change-Id: I124b058f782c900a3a54c15ed66a0d91d0cde5ce
Reviewed-on: https://go-review.googlesource.com/22744
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The GNU linker follows the letter of -znocopyreloc by refusing to
generate COPY relocations on arm64. Unfortunately it generates an
error instead of finding another way. The gold linker works, so
switch to it.
Fixes linux/arm64 build.
Change-Id: I1f7119d999c8f9f1f2d0c1e06b6462cea9c02a71
Reviewed-on: https://go-review.googlesource.com/22185
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Change-Id: I91873aaebf79bdf1c00d38aacc1a1fb8d79656a7
Reviewed-on: https://go-review.googlesource.com/21433
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When building shared libraries, all symbols on Allsym are marked reachable.
What I didn't realize was that this includes the ".dup" symbols created when
"dupok" symbols are read from multiple package files. This breaks now because
deadcode makes some assumptions that fail for these ".dup" symbols, but in any
case was a bad idea -- I suspect this change makes libstd.so a bunch smaller,
but creating it was broken before this CL so I can't be sure.
This change simply stops adding these symbols to Allsym, which might make some
of the many iterations over Allsym the linker does a touch quicker, although
that's not the motivation here.
Add a test that no symbols called ".dup" makes it into the runtime shared
library.
Fixes#14841
Change-Id: I65dd6e88d150a770db2d01b75cfe5db5fd4f8d25
Reviewed-on: https://go-review.googlesource.com/20780
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
https://golang.org/s/execmodes defines rules for how multiple codes of a go
package work when they end up in the address space of a single process, but
currently the linker blows up in this situation. Fix that by loading all .a
files before any .so files and ignoring duplicate symbols found when loading
shared libraries.
I know this is very very late for 1.6 but at least it should clearly not have
any effect when shared libraries are not in use.
Change-Id: I512ac912937e7502ff58eb5628b658ecce3c38e5
Reviewed-on: https://go-review.googlesource.com/18714
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Found by cmd/vet
Change-Id: I29dd207ecd40fe703054e8ad4e81b3267ca89da2
Reviewed-on: https://go-review.googlesource.com/17160
Reviewed-by: David Crawshaw <crawshaw@golang.org>
And enable PIE in cmd/go because that's all it seems to take.
Change-Id: Ie017f427ace5e91de333a9f7cba9684c4641dfd5
Reviewed-on: https://go-review.googlesource.com/14222
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Depends on external linking right now. I have no immediate use for
this, but wanted to check how hard it is to support as android/amd64
is coming and it will require PIE.
Change-Id: I65c6b19159f40db4c79cf312cd0368c2b2527bfd
Reviewed-on: https://go-review.googlesource.com/16072
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently Go produces shared libraries that cannot be shared between processes
because they have relocations against the text segment (not text section). This
fixes this by moving some data to sections with magic names recognized by the
static linker.
The change in genasmsym to add STYPELINK to the switch should fix things on
darwin/arm64.
Fixes#10914
Updates #9210
Change-Id: Iab4a6678dd04cec6114e683caac5cf31b1063309
Reviewed-on: https://go-review.googlesource.com/14306
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 2c2cbb69c8.
Broke darwin/arm64
Change-Id: Ibd2dea475d6ce6a8b4b40e2da19a83fc0514025d
Reviewed-on: https://go-review.googlesource.com/14301
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently Go produces shared libraries that cannot be shared between processes
because they have relocations against the text segment (not text section). This
fixes this by moving some data to sections with magic names recognized by the
static linker.
Fixes#10914
Updates #9210
Change-Id: I7178daadc0ae87953d5a084aa3d580f4e3b46d47
Reviewed-on: https://go-review.googlesource.com/10300
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#12083
Change-Id: I8256739b33cf08d84dec23120d527667de2e6eea
Reviewed-on: https://go-review.googlesource.com/13822
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
