Required two changes:
- avoid creating a closure in the case where the actual receiver of an
embedded method is not generic even though the base operand of the
selector is generic. This is similar to the test suggested by wayne
zuo - I thought it was clear in buildClosure, and easier to comment.
- Propagate //go:nointerface to base generic methods and then to
instantiations.
Change-Id: If30c834e4223c2639b7f7e74d44e6087aa9ccd76
Reviewed-on: https://go-review.googlesource.com/c/go/+/344251
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Wayne Zuo <wdvxdr1123@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
This CL changes cmd/compile's -G flag's default from 0 to 3, which
enables use of the new types2 type checker and support for type
parameters. The old type checker is still available with
-gcflags=all=-G=0.
The CL also updates the regress test harness to account for the change
in default behavior (e.g., to expect known types2 changes/failures).
However, the -G=0 mode is still being tested for now.
Copy of CL 340914 by danscales@, minus the cmd/internal/objabi.AbsFile
change (handled instead by CL 343731) and rebased to master branch.
Updates #43651.
Change-Id: I1f62d6c0a3ff245e15c5c0e8f3d922129fdd4f29
Reviewed-on: https://go-review.googlesource.com/c/go/+/343732
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is used within Google's internal code repo, so getting it working
is a pre-req for enabling -G=3 by default.
Change-Id: Icbc570948c852ca09cdb2a59f778140f620244b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/343429
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
In this case, we can't use an itab for doing a bound call, since we're
converting from an interface to an interface. We do a static or dynamic
type assert in new function assertToBound().
The dynamic type assert in assertToBound() is only needed if a bound is
parameterized. In that case, we must do a dynamic type assert, and
therefore need a dictionary entry for the type bound (see change in
getGfInfo). I'm not sure if we can somehow limit this case, since using
an interface as a type arg AND having the type bound of the type
arg be parameterized is a very unlikely case.
Had to add the TUNION case to parameterizedBy1() (which is only used for
extra checking).
Added a bunch of these test cases to 13.go, which now passes.
Change-Id: Ic22eed637fa879b5bbb46d36b40aaad6f90b9d01
Reviewed-on: https://go-review.googlesource.com/c/go/+/339898
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Fix the cons.go missing method error. Mark all the methods of
instantiated interface types as used. We could try to record all the
exact methods used for generic interface types, but for now, just mark
all the methods as used so that their methods are not dead-code
eliminated.
Change-Id: I35685eda82476244371379b97691a1b8506ef0f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/337349
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is a partial port of https://golang.org/cl/330629, containing
only the actual bug fix and adjustements to another test file.
The respective test case has not been ported yet as it requires
some bigger adjustments.
For #46905
Change-Id: Ibd20658b8a31855da20cf56e24bcce9560656ca0
Reviewed-on: https://go-review.googlesource.com/c/go/+/336350
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This CL changes fixedbugs/issue30862.go into a "runindir" test so that
it can use '-goexperiment fieldtrack' and test that //go:nointerface
works with cmd/compile. In particular, this revealed that -G=3 and
unified IR did not handle it correctly.
This CL also fixes unified IR's support for //go:nointerface and adds
a test that checks that //go:nointerface, promoted methods, and
generics all interact as expected.
Updates #47045.
Change-Id: Ib8acff8ae18bf124520d00c98e8915699cba2abd
Reviewed-on: https://go-review.googlesource.com/c/go/+/332611
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixes -G=3 issue with issue44688.go.
Change-Id: Ie98c0cbd48683dedd115332043f14c8f3160f46c
Reviewed-on: https://go-review.googlesource.com/c/go/+/337029
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
This fix the case where a type param or derived type is converted to a
non-empty interface. Previously, we were converting to an empty
interface and then using DOTTYPE to convert to the correct non-empty
interface. In that case, we can get the needed itab directly from the
dictionary. This is needed for correctness from shapes, if the
destination interface is parameterized, else we will incorrectly convert
to the shape version of the interface.
Creating/writing an itab can involve generating wrappers for a bunch of
methods, which may use dictionaries. So, all the
dictionaries/instantiations are being generated on the fly and have
recursive relationships, it is simplest to finish creating/writing the
itabs at the end of the stenciling phase. So, we create a list of the
dictionaries which need to be completed by writing out their itab
entries.
The existing tests ordered.go, ifaceconv.go, and issue44688.go make use
of this optimization.
Got itab conversions for bound calls working, except for 13.go.
Also, want to get rid of the concretify, but I think we need more info
on the Bound from types2.
Change-Id: If552958a7b8a435500d6cc42c401572c367b30d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/336993
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL makes two related changes:
1. It uses 'go env -json' to query the environment configuration,
rather than attempting to manually reconstruct the values that cmd/go
is going to use.
2. It changes the -goexperiment flag to *extend* any ambient
GOEXPERIMENT configuration. Notably, this means that '-goexperiment
fieldtrack' now tests fieldtracking in conjunction with any other
experiments (e.g., unified IR). Tests that want to test an exact
GOEXPERIMENT config should use '-goexperiment none,foo' instead.
Change-Id: I96a97198209e540e934fe7035110c3ae3a8f0e6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/332610
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Removed a case in transformCall() where we were setting a type on n,
which isn't needed, since noder2 already set the type of n. More
importantly, we are losing information, since the type of the results
may be a shape type, but the actual type of call is the known type
from types2, which may be a concrete type (in this case Zero[MyInt]).
That concrete type will then be used correctly if the concrete result is
converted to an interface.
If we are inlining the call to Zero[MyInt], we need to add an implicit
CONVNOP operation, since we are going to use the result variable
directly, which has a shape type. So, add an implicit CONVNOP to
remember that the known type is the concrete type.
Also cleaned up 14.go a bit, so it is more understandable. Renamed type
T to AnyInt, since T is used elsewhere as a type parameter. Reformatted
Zero function and added a comment.
Change-Id: Id917a2e054e0bbae9bd302232853fa8741d49b64
Reviewed-on: https://go-review.googlesource.com/c/go/+/336430
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
METHVALUE in a generic function (that is not called) was not causing
buildClosure() to be called and therefore not using dictionaries. Also,
had to add an extra check to make sure that if we have a FUNCINST
node above a METHVALUE, we only call buildClosure once.
Change-Id: I49756152fc343e5ac1c449e697960fc2a0f482ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/336429
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
We'll have to revisit eventually, but disabling for now.
Change-Id: Ic34cfe451939d61884079bb125b9290db1e05e47
Reviewed-on: https://go-review.googlesource.com/c/go/+/335829
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
- set correct position for closure capture variable in (*irgen).use()
(issue20250.go) Also, evaluate rhs, lhs in that order in assignment
statements to match noder1 (affects ordering of closure variables).
- make sure to set Assign flag properly in (*irgen).forStmt() for range
variables which are map accesses (issue9691.go)
- make sure CheckSize() is call on the base type for top-level types
converted by (*irgen).typ() that are pointer types (issue20174.go and
issue37837.go)
- deal with parentheses properly in validation function
(*irgen).validate() (issue17270.go)
- avoid HasNil call on type TTYPEPARAM - types2 typechecker will have
already checked validity of the typeparam having nil value (new test
issue39755.go)
Change-Id: Ie68004d964698aea047e19e7dcd79b297e9d47ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/334733
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Call SetPos() in g.expr() so it is available for any new nodes.
Print out the actual type for a composite literal in exprFmt() if
available, else use Ntype if available. Seems generally useful, since
the type name is always more useful than just 'composite literal'.
Fixes a bunch of cases that are excluded in run.go for -G=3.
Change-Id: I40b9bba88027ea4f36d419e3989e7f14891bea04
Reviewed-on: https://go-review.googlesource.com/c/go/+/334609
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
types2 currently ignores pragmas, so it does not catch a conversion
error when converting a pointer to a type which is NOT marked notinheap
to a pointer to a convertible type, but which is marked notinheap.
So, we specifically check for this error in transformConv() and report
it during noder2.
Change-Id: I6e9c9ee29f53fa5e490c1ac8306e2191db59eeb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/333369
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
1.go, 12.go: similar to calculating type sizes, we delay computing
instantiations during import until we get up to a top-level type, in
order to make sure recursive types are complete. But we should always
delay calculating sizes when we delay instantiating types, since
otherwise we may try to calculate the size of an incomplete type. So,
needed to add Defer/ResumeCheckSize in (*importReader).typ where we also
defer instantiations. (iimport.go)
2.go: when doing type substition, we have to handle named, parameterized
basic types i.e. the type has a type parameter even though the
underlying type is a basic type that doesn't depend on the parameter.
(subr.go)
3.go: for go 1.18, we allow arbitrary types in interfaces. We had
already allowed union types and tilde types, but didn't allow regular
non-interface types in Go 1.17 for compatibility. Just skip an error
in the case of 1.18. (size.go)
5.go: types2 and types1 differ in how they print out interfaces. types1
puts a space between "interface" and "{", types2 does not. So, since
some typenames come from types2 and some from types1, we need to remove
the space when printing out type arguments. (iimport.go/subr.go)
9.go: in subst.node(), we were missing the KeyExpr case where a node has
no type. The assertion is just there, to make sure we understand all the
cases where there is no type to translate. We could just remove the
whole error check. (stencil.go)
13.go: in subst.node(), missed handling the case where a method
expression is immediate called (which of course, is quite unusual, since
then there's no real reason to have used the method expression syntax in
that case). Just needed to add ir.OMETHEXPR in the OCALL switch
statement. (stencil.go)
Change-Id: I202cbe9541dfafe740e3b84b44982d6181738ea0
Reviewed-on: https://go-review.googlesource.com/c/go/+/333165
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
types2.subst has an assertion that check is non-nil, but which breaks
Instantiate() with an interface type param (used when re-importing
instatiated type to types2). But this check was added when Instantiate()
was added, and things seem to work fine when the assertion is removed.
Fixes test/typeparam/mdempsky/7.go.
Change-Id: I4980f0b202a0b310a3c91a7a87f97576f54911de
Reviewed-on: https://go-review.googlesource.com/c/go/+/333155
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
This allows exporting comparable type bounds, and importing back into
types2 for typechecking.
Fixes typeparam/mdempsky/8.go
Change-Id: I3ee12433df2ed68ac6ef4cad24be9fcdfaaca4e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/333129
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
The (*T).M method expression is where M is a value method, but the type
(*T) is a pointer to the main type. In this case, after following any
embedded fields, we need to add an extra star operator when using the
receiver arg in the closure call.
Thanks to Cuong for finding/pointing out an example for this case
(typeparam/mdempsky/14.go) This example also shows that we now need the
ability to export/import OEFACE and OIDATA, which I added.
Change-Id: Ida0f81ce757fff78fec6276c60052ed71d207454
Reviewed-on: https://go-review.googlesource.com/c/go/+/333014
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
This CL includes multiple test cases that exercise unique failures
with -G=3 mode that did not affect unified IR mode. Most of these were
found over a period of about 3 hours of manual experimentation.
Thanks to Cuong Manh Le for test cases 11 and 12.
Updates #46704.
Change-Id: Ia2fa619536732b121b6c929329065c85b9384511
Reviewed-on: https://go-review.googlesource.com/c/go/+/326169
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL changes the existing excluded-test mechanism into a
known-failure mechanism instead. That is, it runs the test regardless,
but only reports if it failed (or succeeded) unexpectedly.
It also splits the known failures list into fine-grain failure lists
for types2, types2 w/ 32-bit target, -G=3, and unified.
Updates #46704.
Change-Id: I1213cbccf1bab6a92d9bfcf0d971a2554249bbff
Reviewed-on: https://go-review.googlesource.com/c/go/+/332551
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Allow fix for issue46725 to work for -G=3 mode.
Change-Id: Id522fbc2278cf878cb3f95b3205a2122c164ae29
Reviewed-on: https://go-review.googlesource.com/c/go/+/331470
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In normal build configurations, we test both -G=0 and -G=3 so that we
can test both typecheck and types2. However, GOEXPERIMENT=unified
always uses types2, so testing both is redundant.
Change-Id: I697d2ad916d8b17cfaf4f0b6b32eec380d4e7906
Reviewed-on: https://go-review.googlesource.com/c/go/+/330755
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Setting `-gcflags=all=-d=unified` works for normal builds/tests, but
seems to have trouble with the test/run.go regress tests. So add a
GOEXPERIMENT knob to allow another way to turn on unified IR
construction, which plays better with all.bash.
While here, update two existing test expectations that currently fail
during GOEXPERIMENT=unified ./all.bash:
1. misc/cgo/errors/testdata/err2.go is testing column positions, and
types2 gets one case slightly better, and another case slightly
worse. For now, the test case is updated to accept both.
2. fixedbugs/issue42284.go is added to the list of known failures,
because it fails for unified IR. (It's an escape analysis test, and
escape analysis is working as expected; but unified is formatting an
imported constant value differently than the test's regexp expects.)
Updates #46786.
Change-Id: I40a4a70fa1b85ac87fcc85a43687f5d81e011ec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/328215
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This ports the fix in CL 328050 for typecheck to types2.
The fix is not identical, due to code structure differences between
typecheck and types2, but the idea is the same. We only do the untyped
conversion when both operands can be mixed.
Updates #46749
Change-Id: Ib2c63ba0d5dd8bf02318b1bfdfe51dcaeeeb7f82
Reviewed-on: https://go-review.googlesource.com/c/go/+/328053
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
- test/run.go
CL 328050 added fixedbugs/issue46749.go to -G=3 excluded files list
Merge List:
+ 2021-06-16 785a8f677f cmd/compile: better error message for invalid untyped operation
+ 2021-06-16 a752bc0746 syscall: fix TestGroupCleanupUserNamespace test failure on Fedora
+ 2021-06-15 d77f4c0c5c net/http: improve some server docs
+ 2021-06-15 219fe9d547 cmd/go: ignore UTF8 BOM when reading source code
+ 2021-06-15 723f199edd cmd/link: set correct flags in .dynamic for PIE buildmode
+ 2021-06-15 4d2d89ff42 cmd/go, go/build: update docs to use //go:build syntax
+ 2021-06-15 033d885315 doc/go1.17: document go run pkg@version
+ 2021-06-15 ea8612ef42 syscall: disable c-shared test when no cgo, for windows/arm
+ 2021-06-15 abc56fd1a0 internal/bytealg: remove duplicate go:build line
+ 2021-06-15 4061d3463b syscall: rewrite handle inheritance test to use C rather than Powershell
+ 2021-06-15 cf4e3e3d3b reflect: explain why convertible or comparable types may still panic
+ 2021-06-14 7841cb14d9 doc/go1.17: assorted fixes
+ 2021-06-14 8a5a6f46dc debug/elf: don't apply DWARF relocations for ET_EXEC binaries
+ 2021-06-14 9d13f8d43e runtime: update the variable name in comment
+ 2021-06-14 0fd20ed5b6 reflect: use same conversion panic in reflect and runtime
+ 2021-06-14 6bbb0a9d4a cmd/internal/sys: mark windows/arm64 as c-shared-capable
+ 2021-06-14 d4f34f8c63 doc/go1.17: reword "results" in stack trace printing
Change-Id: I60d1f67c4d48cd4093c350fc89bd60c454d23944
For typed vs un-typed operation, the compiler do the conversion
un-conditionally, so if the operation is invalid, the error report is
pointed to the conversion, instead of the invalid operation itself.
To fix this, only do the conversion when the operations are valid
for both types.
Fixes#46749
Change-Id: Ib71c7bcd3ed5454e6df55b6a8db4e0f189259ba7
Reviewed-on: https://go-review.googlesource.com/c/go/+/328050
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Two non-conflict changes included because they're needed for all.bash:
1. Bump internal/goversion.Version to 18. This will happen eventually
anyway (dev.typeparams will not be merged back to Go 1.17), and is
needed for cmd/api to allow new API additions.
2. Add fixedbugs/issue46725.go (new test added on master) to the list
of known failures for -G=3. This test exercises a bug that was fixed
in typecheck, but -G=3 mode has duplicated that code and will need to
be fixed as well. That's outside of the scope of a merge.
Conflicts:
- src/runtime/traceback.go
Nearby lines were removed on both master and dev.typeparams.
Merge List:
+ 2021-06-14 fdab5be159 doc/go1.17: further revise OpenBSD release notes
+ 2021-06-14 326ea438bb cmd/compile: rewrite a, b = f() to use temporaries when type not identical
+ 2021-06-14 3249b645c9 cmd/compile: factor out rewrite multi-valued f()
+ 2021-06-13 14305bf0b9 misc/cgo: generate Windows import libraries for clang
+ 2021-06-13 24cff0f044 cmd/go, misc/cgo: skip test if no .edata
+ 2021-06-13 67b1b6a2e3 cmd/compile: allow ir.OSLICE2ARRPTR in mayCall
+ 2021-06-12 1ed0d129e9 runtime: testprogcgo: don't call exported Go functions directly from Go
+ 2021-06-12 9d46ee5ac4 reflect: handle stack-to-register translation in callMethod
+ 2021-06-11 e552a6d312 cmd/go: remove hint when no module is suggested
+ 2021-06-11 16b5d766d8 syscall: do not load native libraries on non-native powershell on arm
+ 2021-06-11 77aa209b38 runtime: loop on EINTR in macOS sigNoteSleep
+ 2021-06-11 e2dc6dd5c9 doc/go1.17: clean up formatting of gofmt section
+ 2021-06-11 2f1128461d cmd/go: match Windows paths in TestScript/mod_invalid_version
+ 2021-06-11 2721da2608 doc/go1.17: fix formatting near httptest
+ 2021-06-10 770f1de8c5 net/http: remove test-only private key from production binaries
+ 2021-06-10 8d11b1d117 cmd/go: report the imports of CompiledGoFiles in ImportMap
+ 2021-06-10 dc00dc6c6b crypto/tls: let HTTP/1.1 clients connect to servers with NextProtos "h2"
+ 2021-06-09 27f83723e9 api: promote next to go1.17
+ 2021-06-09 182157c81a doc/go1.17: remove lingering TODO
+ 2021-06-09 a5bc060b42 doc/go1.17: document strconv changes for Go 1.17
+ 2021-06-09 1402b27d46 strconv: document parsing of leading +/-
+ 2021-06-09 df35ade067 doc/go1.17: document //go:build lines
+ 2021-06-09 e4e7807d24 net/http: add AllowQuerySemicolons
+ 2021-06-09 ec3026d032 doc/go1.17: remove TODO for ports section
+ 2021-06-09 e6dda19888 net/url: reject query values with semicolons
+ 2021-06-09 139e935d3c math/big: comment division
+ 2021-06-09 aa5540cd82 cmd/compile: make map.zero symbol content-addressable
+ 2021-06-09 07ca28d529 cmd/link: fix bug in -strictdups checking of BSS symbols
+ 2021-06-08 bcecae2af6 doc/go1.17: mention new possibility of type conversion panicking
+ 2021-06-08 63dcab2e91 doc/go1.17: mention new vet checks sigchanyzer and stdmethods.
+ 2021-06-08 6551763a60 doc/go1.17: mention block profile bias fix
+ 2021-06-08 cb80937bf6 Revert "doc/go1.17: mention block profile bias fix"
+ 2021-06-08 d3e3d03666 net: reject leading zeros in IP address parsers
+ 2021-06-08 da4a640141 doc/go1.17: revise OpenBSD release notes
+ 2021-06-08 689f4c7415 doc/go1.17: mention block profile bias fix
+ 2021-06-08 9afe071c60 doc/go1.17: remove TODO for Tools section
+ 2021-06-08 f753d7223e doc/go1.17: resolve TODO for cmd/cover
+ 2021-06-08 9498b0155d cmd/go: in Go 1.17+ modules, add indirect go.mod dependencies separately from direct ones
+ 2021-06-08 949f00cebe doc/go1.17: add release notes for crypto packages
+ 2021-06-08 0fb3e2c184 doc/go1.17: add a release note for the '-compat' flag to 'go mod tidy'
+ 2021-06-08 2169deb352 cmd/compile: use t.AllMethods when sorting typesByString
+ 2021-06-08 c20bcb6488 runtime: remove out-of-date comments about frame skipping
+ 2021-06-07 39c39ae52f doc: document Go 1.17 language changes
+ 2021-06-07 dc8b558951 cmd/dist: pass -Wno-lto-type-mismatch in swig_callback_lto
+ 2021-06-07 909dd5e010 strconv: ParseFloat: always return ErrSyntax for bad syntax
Change-Id: Iffdf379d0275bbd12d50149ce38634773ced481d
This CL copies go/build's splitQuoted function (used for parsing #cgo
directives within `import "C"` preambles) to parse test recipe
commands. In particular, this now allows writing "build" and "run"
tests that use -gcflags to pass multiple compiler flags.
Change-Id: I0d18a9c13a4ce24bbdfa1da8662c0498c93a6762
Reviewed-on: https://go-review.googlesource.com/c/go/+/327275
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Many compiler tests fail with -G=3 due to changes in error message format.
This commit fixes two of these tests, to ensure I am on the right track in review.
Updates #46447
Change-Id: I138956d536a1d48ca9198e6ddbfde13865bb5dd5
GitHub-Last-Rev: 0ed904b9fa
GitHub-Pull-Request: golang/go#46445
Reviewed-on: https://go-review.googlesource.com/c/go/+/323314
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
15 more tests are passing from recent changes. 83 still to go.
Change-Id: I155b3e3db966d604ccec8bf3a7c182421f3d26c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/323211
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
In a late change to golang.org/cl/320609, while going back and forth
on the meaning of the boolean result value for "checkFlags", I got one
of the cases wrong. As a result, rather than testing both default
flags and -G=3, we were (redundanly) testing default flags and -G=0.
I ran into this because in my local dev tree, I'm using types2 even
for -G=0, and evidently one of the recent types2 CLs changed the error
message in fixedbugs/issue10975.go. Fortunately, there haven't been
any other regressions despite lacking test coverage.
So this CL cleans things up a bit:
1. Fixes that test to use -lang=go1.17, so types2 reports the old
error message again.
2. Renames "checkFlags" to "validForGLevel" so the boolean result is
harder to get wrong.
3. Removes the blanket deny list of all -m tests, and instead adds the
specific tests that are still failing. This effectively extends -G=3
coverage to another 27 tests that were using -m but already passing,
so we can make sure they don't regress again.
4. Adds a -f flag to force running tests even if they're in the deny
list, to make it easier to test whether they're still failing without
having to edit run.go.
Change-Id: I058d9d90d81a92189e54c6f591d95fb617fede53
Reviewed-on: https://go-review.googlesource.com/c/go/+/322612
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
When reporting a "cannot import package as init" error, we can't rely
on s.LocalPkgName being non-nil, as the original package's name may
already be nil.
Change-Id: Idec006780f12ee4398501d05a5b2ed13157f88ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/320490
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Followup to previous commit that extended test/run.go to run more
tests with -G=3. This CL updates a handful of easy test cases for
types2 compatibility.
Change-Id: I58a6f9ce6f9172d61dc25411536ee489ccb03ae0
Reviewed-on: https://go-review.googlesource.com/c/go/+/320610
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL expands the current logic for re-running "errorcheck" tests
with -G=3 to run (almost) all regress tests that way. This exposes a
handful of additional failures, so the excluded-files list is expanded
accordingly. (The next CL addresses several of the easy test cases.)
Change-Id: Ia5ce399f225d83e817a046a3bd1a41b9681be3af
Reviewed-on: https://go-review.googlesource.com/c/go/+/320609
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
The build.Default context really needs to accurately describe
the default build context. The goexperiment tags being a special
case in the go command violates that rule and is the root cause
of the various try-bot failures blocking the enabling of regabi.
(The cleanups I made in golang.org/x/tools were long overdue
but are not strictly necessary for making regabi work; this CL is.)
Having moved the GOEXPERIMENT parsing into internal/buildcfg,
go/build can now use it to set up build.Default, in the new field
ToolTags, meant to hold toolchain-determined tags (for now,
just the experiments). And at the same time we can remove the
duplication of GOOS and GOARCH defaults.
And then once build.Default is set up accurately, the special case
code in cmd/go itself can be removed, and the special case code
in test/run.go is at least a bit less special.
Change-Id: Ib7394e10aa018e492cb9a83fb8fb9a5011a8c25b
Reviewed-on: https://go-review.googlesource.com/c/go/+/310732
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Currently, run.go sets GOEXPERIMENT build tags based on the
*difference* from the baseline experiment configuration, rather than
the absolute experiment configuration. This differs from cmd/go. As a
result, if we set a baseline configuration and don't override it with
a GOEXPERIMENT setting, run.go won't set any GOEXPERIMENT build tags,
instead of setting the tags corresponding to the baseline
configuration.
Fix this by making compile -V=goexperiment produce the full
GOEXPERIMENT configuration, which run.go can then use to set exactly
the right set of build tags.
For #40724.
Change-Id: Ieda6ea62f1a1fabbe8d749d6d09c198fd5ca8377
Reviewed-on: https://go-review.googlesource.com/c/go/+/310171
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If GOEXPERIMENT environment variable is unset, use the default
value that is baked into the toolchain (instead of no
experiments).
Change-Id: I41f863e6f7439f2d53e3ebd25a7d9cf4a176e32e
Reviewed-on: https://go-review.googlesource.com/c/go/+/309333
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This requires us to add a fake argument to issue36705.go so that the
test driver will build it with "go run" rather than "go tool compile".
Change-Id: Id08b97d898ee3e9d6c1fbb072a0a9317ed9faedd
Reviewed-on: https://go-review.googlesource.com/c/go/+/304569
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Adds code to the compiler's "order" phase to rewrite go and defer
statements to always be argument-less. E.g.
defer f(x,y) => x1, y1 := x, y
defer func() { f(x1, y1) }
This transformation is not beneficial on its own, but it helps
simplify runtime defer handling for the new register ABI (when
invoking deferred functions on the panic path, the runtime doesn't
need to manage the complexity of determining which args to pass in
register vs memory).
This feature is currently enabled by default if GOEXPERIMENT=regabi or
GOEXPERIMENT=regabidefer is in effect.
Included in this CL are some workarounds in the runtime to insure that
"go" statement targets in the runtime are argument-less already (since
wrapping them can potentially introduce heap-allocated closures, which
are currently not allowed). The expectation is that these workarounds
will be temporary, and can go away once we either A) change the rules
about heap-allocated closures, or B) implement some other scheme for
handling go statements.
Change-Id: I01060d79a6b140c6f0838d6e6813f807ccdca319
Reviewed-on: https://go-review.googlesource.com/c/go/+/298669
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Temporarily disable a questionable test case in fixedbugs/bug193.go
and enable the test as a whole. See the issues below for details.
Updates #45114.
Updates #45117.
Change-Id: I1de6f8d79b592eeeec139cd92b6c9cac56a9a74b
Reviewed-on: https://go-review.googlesource.com/c/go/+/303094
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Now that we can set GOEXPERIMENT at build time, we no longer need
-d=fieldtrack in the compiler to enabled field tracking at build time.
Switch the one test that uses -d=fieldtrack to use GOEXPERIMENT
instead so we can eliminate this debug flag and centralize on
GOEXPERIMENT.
Updates #42681.
Change-Id: I14c352c9a97187b9c5ec8027ff672d685f22f543
Reviewed-on: https://go-review.googlesource.com/c/go/+/302969
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This was a mostly clean merge, with the exception of codereview.cfg and
changes in src/go/types.
codereview.cfg for dev.typeparams is preserved in this CL. It should be
deleted before merging back to master.
The go/types changes were merged manually. For the most part this
involved taking the union of patches, with the following exceptions:
+ declInfo.aliasPos is removed, as it is not necessary in
dev.typeparams where we have access to the full TypeSpec.
+ Checker.overflow is updated to use the asBasic converter.
+ A TODO is added to errorcodes.go to ensure that go1.16 error codes
are preserved.
Change-Id: If9595196852e2163e27a9478df1e7b2c3704947d
Currently, we call Warnl in SSA backend when we see a function
(defined or called) with regparams pragma. Calling Warnl in
concurrent environment is racy. As the debugging output is
temporary, for testing purposes we just pass -c=1. We'll remove
the pragma and the debugging print some time soon.
Change-Id: I6f925a665b953259453fc458490c5ff91f67c91a
Reviewed-on: https://go-review.googlesource.com/c/go/+/291710
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Add respective check to type checker.
Enables another excluded test in test/run.go.
This CL completes the currently required checks for
language compatibility in types2.
Updates #31793.
Change-Id: Icececff9e6023d38f600c93bcb54cdcafcf501b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/290911
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
