It's fine to ignore errors when reading trim.txt, since it might not
exist or might be corrupted. However, if we encounter an error in
writing the file, we will end up trimming again at every cmd/go
invocation, which will cause invocations to become progressively
slower (because each command will check more and more cache files for
trimming).
Although that situation would not cause the output of any 'go' command
to be invalid, it still seems better to escalate the problem to the
user to be fixed instead of proceeding in a degraded state.
Returning an explicit error also allows TestCacheTrim to skip if the
Trim error indicates that a required operation (in this case, file
locking) is not supported by the platform or filesystem.
For #58141.
Updates #35220.
Updates #26794.
Change-Id: Iedb94bff4544fd9914f5ac779a783a116372c80f
Reviewed-on: https://go-review.googlesource.com/c/go/+/482795
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
Update to use the common macros to ensure all ELFv2 callee-save registers
are saved properly when transitioning from ELFv2 to Go calling/stack
conventions. Simplify the inlined Go function call, and remove the asm
hacks which inhibited implicit stack frame management.
Change-Id: Iee118a4069962a791436c6fe19370e1929404a8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/479795
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In rare cases, elf will get a corrupted section starts with 0x1,
which happens to be COMPRESS_ZLIB that causing decompress twice.
This CL drops sectionData decompress data after open section.
Fixes#59208
Change-Id: I7999a55868b3b3481509e1ac35985f7580f0f688
Reviewed-on: https://go-review.googlesource.com/c/go/+/480895
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: M Zhuo <mzh@golangcn.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
setPos is called for most nodes, and in a number of cases,
the position is already the same.
PositionFor is a relatively expensive call,
as it needs to "unpack" a token.Pos into a token.Position.
If we can tell that the position is the same in a cheap way,
we can then avoid calling setPos and PositionFor.
Luckily, we can get the position's offset within the file,
and it doesn't involve the relatively expensive unpacking.
name old time/op new time/op delta
PrintFile-16 4.79ms ± 1% 4.36ms ± 1% -8.88% (p=0.008 n=5+5)
name old speed new speed delta
PrintFile-16 10.8MB/s ± 1% 11.9MB/s ± 1% +9.73% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
PrintFile-16 106kB ± 1% 106kB ± 1% ~ (p=0.167 n=5+5)
name old allocs/op new allocs/op delta
PrintFile-16 2.42k ± 0% 2.42k ± 0% ~ (all equal)
This does assume that the positions of a node being printed are all
within a file, as go/token.Position.Offset is relative to each file.
This seems like a perfectly fine assumption to make right now,
as the largest node which can be printed is an *ast.File.
Change-Id: I2ae55f507ba8ba9f280898c9c8e01c994d9b2a26
Reviewed-on: https://go-review.googlesource.com/c/go/+/461739
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Previously, we need calculate both quotient and remainder together.
However, in most cases, only one result is needed. By separating these
instructions, we can save one instruction in most cases.
Change-Id: I0a2d4167cda68ab606783ba1aa2720ede19d6b53
Reviewed-on: https://go-review.googlesource.com/c/go/+/475315
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: abner chenc <chenguoqi@loongson.cn>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Fixes#59506
Change-Id: I2f8b92e93b706b061ca0eb0bd52e5cf798ce9ede
Reviewed-on: https://go-review.googlesource.com/c/go/+/483358
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Bypass: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
The function just calculates the number of needed padding bytes,
instead of actually carrying out the alignment operation. And it has
the context argument at the end of the argument list, while contexts
idiomatically come first. Indeed, this is the only case in
cmd/internal/obj where ctxt is not the only argument and does not come
first.
Fix those two nits; no functional change intended.
Suggested by Ian during review of CL 479815 (that introduces a copy of
this helper into the loong64 port).
Change-Id: Ieb221ead23282abe6e04804d537e1234c7ab21d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/483155
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The behavior in #18806 can be tested with a localhost-only port,
provided that we're willing to assume what format the listener would
report for an external dual-stack port.
Fixes#59497.
Change-Id: I171fb03eb46aee8e85480e04626a23f4f3b923e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/482163
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Bryan Mills <bcmills@google.com>
cmd/doc passes structs to go/format, but that means that comments
on fields within those structs don't look like what cmd/doc prints
when asked for a struct field directly. Tweak the field comments
so that they look the same either way.
Fixes#56592
Change-Id: I198cb7a58e3d8558406c386072c630332f91c6b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/483055
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Stop depending on DepsErrors to report errors to the user and instead
only use it and compute it in list. Instead, use Incomplete to figure
out when a package or its depencies have an error, and only if they
do, do the work of finding all those errors.
For #59157
Change-Id: Ied927f53e7b1f66fad9248b40dd11ed960b3ef91
Reviewed-on: https://go-review.googlesource.com/c/go/+/483495
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Change-Id: Iae6ac32db5c2aacb323793a7e0dc34e09648d035
Reviewed-on: https://go-review.googlesource.com/c/go/+/482295
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Change-Id: I5d02279d0593a8368b2f249a6b53650b89aed7b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/482275
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Standard inlining has a reduced maximum cost of callees (20 instead of
80) when inlining into a "big" function, to limit how much bigger we
will make an already big function.
When adding PGO hot call budget increases, we inadvertently bypassed
this "big" function restriction, allowing hot calls of up to
inlineHotMaxBudget, even into big functions.
Add the restriction back, even for hot calls. If a function is already
very large, we probably shouldn't inline even more.
A very important note here is that function "big"-ness is computed prior
to any inlining. One potential problem with PGO is that many hot calls
inline into an initially-small function and ultimately make it very
large. This CL does nothing to address that case, which would require
recomputing size after inlining.
This CL has no impact on sweet PGO benchmarks. I specifically dug into
tile38, which contained 0 hot big functions. Other benchmarks are
probably similar.
Change-Id: I3b6304eaf7738a219359d4b8bb121d68babfea8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/482157
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
And assign the error to the importing package. Before this change, for
some errors for bad imports, such as importing a vendored package with
the wrong path, we would make a dummy package for the imported package
with the error on it. Instead report the error on the importing
package where it belongs. Do so by returning an error from loadImport
and handling it on the importing package.
For #59157
Change-Id: I952e1a82af3857efc5da4fd3f8bc6be473a60cf5
Reviewed-on: https://go-review.googlesource.com/c/go/+/482877
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
It appears to have been unused since https://go.dev/cl/298670
in April 2021, as that change removed its only use.
It is always in the git history if it is needed again.
Change-Id: Ie55d059c102dfaa75bd253e09d48a4b30f45e941
Reviewed-on: https://go-review.googlesource.com/c/go/+/483136
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
GOTRACEBACK=wer is a new traceback level that acts as "crash" and
also enables WER. The same effect can be achieved using
debug.SetTraceback("wer").
The Go runtime currently crashes using exit(2), which bypasses WER
even if it is enabled. To best way to trigger WER is calling
RaiseFailFastException [1] instead, which internally launches the
WER machinery.
This CL also changes how GOTRACEBACK=crash crashes, so both "wer" and
"crash" crash using RaiseFailFastException, which simplifies the
implementation and resolves a longstanding TODO.
Fixes#57441Fixes#20498
[1] https://learn.microsoft.com/en-us/windows/win32/api/errhandlingapi/nf-errhandlingapi-raisefailfastexception
Change-Id: I45669d619fbbd2f6413ce5e5f08425ed1d9aeb64
Reviewed-on: https://go-review.googlesource.com/c/go/+/474915
Reviewed-by: Davis Goodin <dagood@microsoft.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Quim Muntal <quimmuntal@gmail.com>
For now, only apply the rule if either of arguments are constants. That
would catch a lot of real user code, without slowing down the compiler
with code generated for string comparison (experience in CL 410336).
Updates #57959Fixes#45928
Change-Id: Ie2e830d6d0d71cda3947818b22c2775bd94f7971
Reviewed-on: https://go-review.googlesource.com/c/go/+/483359
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
No change in semantics, just removing an unneeded helper.
Also align rules a bit.
Change-Id: Ie4dabb99392315a7700c645b3d0931eb8766a5fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/483439
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Argument type is dangerous because it may be thinner than the actual
store being issued.
Change-Id: Id19fbd8e6c41390a453994f897dd5048473136aa
Reviewed-on: https://go-review.googlesource.com/c/go/+/483438
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
These c-shared related CLs are follow up of CLs 455016, 455017, 455018. Here we
follow the LoongArch ELF psABI v2 standard, which requires the support of the
PCALAU12I instruction.
Updates #53301
Updates #58784
Change-Id: I7f1ddbf3b2470d610f12069d147aa9b3a6a96f32
Reviewed-on: https://go-review.googlesource.com/c/go/+/425474
Reviewed-by: abner chenc <chenguoqi@loongson.cn>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The LoongArch ELF psABI v2 [1] relocs are vastly simplified from the v1
which involved a stack machine for computing the reloc values, but the
details of PC-relative addressing are changed as well. Specifically, the
`pcaddu12i` instruction is substituted with the `pcalau12i`, which is
like arm64's `adrp` -- meaning the lower bits of a symbol's address now
have to be absolute and not PC-relative.
However, apart from the little bit of added complexity, the obvious
advantage is that only 1 reloc needs to be emitted for every kind of
external reloc we care about. This can mean substantial space savings
(each RELA reloc occupies 24 bytes), and no open-coded stack ops has to
remain any more.
While at it, update the preset value for the output ELF's flags to
indicate the psABI update.
Fixes#58784
[1]: https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html
Change-Id: I5c13bc710eaf58293a32e930dd33feff2ef14c28
Reviewed-on: https://go-review.googlesource.com/c/go/+/455017
Run-TryBot: Ben Shi <powerman1st@163.com>
Reviewed-by: xiaodong liu <teaofmoli@gmail.com>
Reviewed-by: abner chenc <chenguoqi@loongson.cn>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Meidan Li <limeidan@loongson.cn>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
This is actually not tied to the ELF psABI v2 upgrade, and can be
enabled "for free".
Change-Id: I6906d9eb4bd8655c685b059283e200cb7e210369
Reviewed-on: https://go-review.googlesource.com/c/go/+/455075
Reviewed-by: abner chenc <chenguoqi@loongson.cn>
Run-TryBot: Ben Shi <powerman1st@163.com>
Reviewed-by: Meidan Li <limeidan@loongson.cn>
Run-TryBot: WANG Xuerui <git@xen0n.name>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: David Chase <drchase@google.com>
In order to avoid a CPU exception resulting from signed overflow, the signed
division code tests if the divisor is -1 and if it is, runs fix up code to
manually compute the quotient and remainder (thus avoiding IDIV and potential
signed overflow).
However, the way that this is currently structured means that the normal code
path for the case where the divisor is not -1 results in five instructions
and two branches (CMP, JEQ, followed by sign extension, IDIV and another JMP
to skip over the fix up code).
Rework the fix up code such that the final JMP is incurred by the less likely
divisor is -1 code path, rather than more likely code path (which is already
more expensive due to IDIV). This result in a four instruction sequence
(CMP, JNE, sign extension, IDIV), with only a single branch.
Updates #59089
Change-Id: Ie8d065750a178518d7397e194920b201afeb0530
Reviewed-on: https://go-review.googlesource.com/c/go/+/482658
Run-TryBot: Joel Sing <joel@sing.id.au>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The same switch statement handles code generation for signed division of
words, double words and quad words. Rather than using multiple switch
statements to select the appropriate instructions, determine all of the
correctly sized operands up front, then use them as needed.
Updates #59089
Change-Id: I2b7567c8e0ecb9904c37607332538c95b0521dca
Reviewed-on: https://go-review.googlesource.com/c/go/+/482657
Run-TryBot: Joel Sing <joel@sing.id.au>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
So iterators that are in progress can know entries have been deleted and
terminate the iterator properly.
Update #55002
Update #56351Fixes#59411
Change-Id: I924f16a00fe4ed6564f730a677348a6011d3fb67
Reviewed-on: https://go-review.googlesource.com/c/go/+/481935
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #58141
Co-authored-by: Richard Musiol <neelance@gmail.com>
Co-authored-by: Achille Roussel <achille.roussel@gmail.com>
Co-authored-by: Julien Fabre <ju.pryz@gmail.com>
Co-authored-by: Evan Phoenix <evan@phx.io>
Change-Id: I52e3e161f81dcbe8605570e47d732992979c4d34
Reviewed-on: https://go-review.googlesource.com/c/go/+/479623
Run-TryBot: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
For #58141
Co-authored-by: Richard Musiol <neelance@gmail.com>
Co-authored-by: Achille Roussel <achille.roussel@gmail.com>
Co-authored-by: Julien Fabre <ju.pryz@gmail.com>
Co-authored-by: Evan Phoenix <evan@phx.io>
Change-Id: I1488726e5b43cd21c5f83900476afd2fb63d70c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/479622
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Fixes#54768
Change-Id: I588ae33c13e0bbd9d324c11771667b22a864047d
Reviewed-on: https://go-review.googlesource.com/c/go/+/483175
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Eli Bendersky <eliben@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Use the type of the store for the byteswap, not the type of the
store's value argument.
Normally when we're storing a 16-bit value, the value being stored is
also typed as 16 bits. But sometimes it is typed as something smaller,
usually because it is the result of an upcast from a smaller value,
and that upcast needs no instructions.
If the type of the store's arg is thinner than the type being stored,
and the byteswap'd value uses that thinner type, and the byteswap'd
value needs to be spilled & restored, that spill/restore happens using
the thinner type, which causes us to lose some of the top bits of the
value.
Fixes#59367
Change-Id: If6ce1e8a76f18bf8e9d79871b6caa438bc3cce4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/481395
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
HashDebugPos function/method included a parameter that was always
the same, and a variable in the same package as the hashdebug code.
So remove it.
(I wrote that code, there was no reason for it to be that way).
Also corrects a stale comment in the loopvar code.
Change-Id: Id3da69cfe6dadeb31d5de62fb76d15103a5d6152
Reviewed-on: https://go-review.googlesource.com/c/go/+/482816
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
The ELF ABI just requires that the address and the offset of a
segment are congruent modulo the alignment, but does not require
the start address to be aligned. While usually the segment's
start address is aligned, apparently the zig linker generates
binary with unaligned address.
At the run time, the memory mapping that contains the segment
starts at an aligned address (rounding down). Use the aligned
address for the load address, which matches the mapping.
Apparently this is what the pprof library expects.
Fixes#59466.
Change-Id: Ife78909b20b7bc975ac4c76f2c5f5db325ddec9b
Reviewed-on: https://go-review.googlesource.com/c/go/+/483035
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
The loong64 PCALIGN directive works with PCs relative to beginning of
functions. So if the function alignment is less than that requested by
PCALIGN, the following code may in fact not be aligned as such, leading
to unexpected performance.
The current function alignment on loong64 is 8 bytes, which seems to
stem from mips64 or riscv64. In order to make performance more
predictable on loong64, it is raised to 16 bytes to ensure that at
least `PCALIGN $16` works.
As alignment of loops written in Go is yet to be tackled, and the
codegen is not otherwise touched, benchmark numbers for this change are
not going to be meaningful, and not included.
Change-Id: I2120ef3746ce067e274920c82091810073bfa3be
Reviewed-on: https://go-review.googlesource.com/c/go/+/481936
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: WANG Xuerui <git@xen0n.name>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Allow writing `PCALIGN $imm` where imm is a power-of-2 between 8 and
2048 (inclusive), for ensuring that the following instruction is
placed at an imm-byte boundary relative to the beginning of the
function. If the PC is not sufficiently aligned, NOOPs will be
inserted to make it so, otherwise the directive will do nothing.
This could be useful for both asm performance hand-tuning, and future
scenarios where a certain bigger alignment might be required.
Change-Id: Iad6244669a3d5adea88eceb0dc7be1af4f0d4fc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/479815
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: WANG Xuerui <git@xen0n.name>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Reviewed-by: abner chenc <chenguoqi@loongson.cn>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Like https://go.dev/cl/481376 did for encoding/gob,
but now for encoding/xml, which had very similar code.
One minor difference is that encoding/xml now needs a SetLen before the
call to Index, as otherwise we index just past the length.
Still, calling Grow and SetLen is easier to understand,
and avoids needing to make a new zero value.
goos: linux
goarch: amd64
pkg: encoding/xml
cpu: AMD Ryzen 7 PRO 5850U with Radeon Graphics
│ old │ new │
│ sec/op │ sec/op vs base │
Unmarshal-8 6.904µ ± 1% 6.980µ ± 1% +1.10% (p=0.009 n=6)
│ old │ new │
│ B/op │ B/op vs base │
Unmarshal-8 7.656Ki ± 0% 7.586Ki ± 0% -0.92% (p=0.002 n=6)
│ old │ new │
│ allocs/op │ allocs/op vs base │
Unmarshal-8 188.0 ± 0% 185.0 ± 0% -1.60% (p=0.002 n=6)
Change-Id: Id83feb467a9c59c80c7936aa892780aae7e8b809
Reviewed-on: https://go-review.googlesource.com/c/go/+/483135
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Expose "http: server gave HTTP response to HTTPS client" error as `ErrSchemeMismatch`, so that it can be compared with `errors.Is` .
Fixes#44855
Change-Id: If96e0d000fdef641fea407310faf9e1c4f7ad0f0
GitHub-Last-Rev: 22879fc883
GitHub-Pull-Request: golang/go#50939
Reviewed-on: https://go-review.googlesource.com/c/go/+/382117
Run-TryBot: Damien Neil <dneil@google.com>
Auto-Submit: Damien Neil <dneil@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
CL 440035 added rewrite rules to simplify "costly" LEA
instructions, but the types in the rewrites were wrong and
the code would go bad if the wrong-typed register was spilled.
CL 482536 attempted to fix this by correcting the type in the
rewrite, but that "fix" broke something on windows-amd64-race.
Instead / for-now, remove the offending rewrite rules.
Updates #21735.
Fixes#59432.
Change-Id: I0497c42db414f2055e1378e0a53e2bceee9cd5d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/482820
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
After performing a round trip on a connection, the connection is
usually returned to the idle connection pool. If the write of the
request did not complete successfully, the connection is not
returned.
It is possible for the response to be read before the write
goroutine has finished signalling that its write has completed.
To allow for this, the check to see if the write completed successfully
waits for 50ms for the write goroutine to report the result of the
write.
See comments in persistConn.wroteRequest for more details.
On a slow builder, it is possible for the write goroutine to take
longer than 50ms to report the status of its write, leading to test
flakiness when successive requests unexpectedly use different connections.
Set the timeout for waiting for the writer to an effectively
infinite duration in tests.
Fixes#51147Fixes#56275Fixes#56419Fixes#56577Fixes#57375Fixes#57417Fixes#57476Fixes#57604Fixes#57605
Change-Id: I5e92ffd66b676f3f976d8832c0910f27456a6991
Reviewed-on: https://go-review.googlesource.com/c/go/+/483116
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
If the Write goroutine is delayed for long enough after its first
Write, the handler may have closed both the readc and donec channels
by the time it selects over them, and the donec case may be randomly
chosen. Handle that case by explicitly checking readc as well.
This fixes a race accidentally introduced in CL 482935 and observed in
https://build.golang.org/log/fa684750994d1fda409722f144b90c65b4c52cf9.
For #59447.
Change-Id: I5c87a599910cf8c1d037e5bbce68bf35afd55d61
Reviewed-on: https://go-review.googlesource.com/c/go/+/483036
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis since fixed in CL 482355.]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Updates #56102.
Change-Id: I1f4fc96c71609c8feb59fecdb92b69ba7e3b5b41
Reviewed-on: https://go-review.googlesource.com/c/go/+/482356
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When a closure is inlined, it may contain other hidden closures, which
the inliner will duplicate, rendering the original nested closures as
unreachable. Because they are unreachable, they don't get processed in
escape analysis, meaning that go/defer statements don't get rewritten,
which can then in turn trigger errors in walk. This patch looks for
nested hidden closures and marks them as dead, so that they can be
skipped later on in the compilation flow. NB: if during escape
analysis we rediscover a hidden closure (due to an explicit reference)
that was previously marked dead, revive it at that point.
Fixes#59404.
Change-Id: I76db1e9cf1ee38bd1147aeae823f916dbbbf081b
Reviewed-on: https://go-review.googlesource.com/c/go/+/482355
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Previously we did not permit them as Go programs generated enormous
core dumps on macOS. However, according to an investigation in #59446,
they are OK now.
For #59446
Change-Id: I1d7a3f500a6bc525aa6de8dfa8a1d8dbb15feadc
Reviewed-on: https://go-review.googlesource.com/c/go/+/483015
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
PCrelative trampolines have no dependence on the TOC pointer or build
mode, thus they are preferable to use when supported.
This is a step towards eliminating the need to use and maintain the
TOC pointer in R2 when PCrel is supported.
Change-Id: I1b1a7e16831cfd6732b31f7fad8df2a7c88c8f84
Reviewed-on: https://go-review.googlesource.com/c/go/+/461599
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
The IMAGE_FILE_DEBUG_STRIPPED characteristic is used to inform that
the debugging information have been removed from the PE files and moved
into a DBG file, but the Go linker doesn't generate DBG files.
Having this characteristic can confuse debugging tools, so better
don't set it.
While here, remove also IMAGE_FILE_LINE_NUMS_STRIPPED, which is
deprecated and should be zero [1].
Fixes#59391
[1] https://learn.microsoft.com/en-us/windows/win32/debug/pe-format#characteristics
Change-Id: Ia6b1dc3353bfa292a17c4bef17c9bac8dc95189a
Reviewed-on: https://go-review.googlesource.com/c/go/+/481615
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Quim Muntal <quimmuntal@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
