If a compilation has multiple text sections, code in
textOff must compare the offset argument against the range
for each text section to determine which one it is in.
The comparison looks like this:
if uintptr(off) >= sectaddr && uintptr(off) <= sectaddr+sectlen
If the off value being compared is equal to sectaddr+sectlen then it
is not within the range of the text section but after it. The
comparison should be just '<'.
Updates #35207
Change-Id: I114633fd734563d38f4e842dd884c6c239f73c95
Reviewed-on: https://go-review.googlesource.com/c/go/+/203817
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This adds an asm implementation of the p256 functions used
in crypto/elliptic, utilizing VMX, VSX to improve performance.
On a power9 the improvement is:
elliptic benchmarks:
name old time/op new time/op delta
BaseMult 1.40ms ± 0% 1.44ms ± 0% +2.66% (p=0.029 n=4+4)
BaseMultP256 317µs ± 0% 50µs ± 0% -84.14% (p=0.029 n=4+4)
ScalarMultP256 854µs ± 2% 214µs ± 0% -74.91% (p=0.029 n=4+4)
ecdsa benchmarks:
name old time/op new time/op delta
SignP256 377µs ± 0% 111µs ± 0% -70.57% (p=0.029 n=4+4)
SignP384 6.55ms ± 0% 6.48ms ± 0% -1.03% (p=0.029 n=4+4)
VerifyP256 1.19ms ± 0% 0.26ms ± 0% -78.54% (p=0.029 n=4+4)
KeyGeneration 319µs ± 0% 52µs ± 0% -83.56% (p=0.029 n=4+4)
This implemenation is based on the s390x implementation, using
comparable instructions for most with some minor changes where the
instructions are not quite the same.
Some changes were also needed since s390x is big endian and ppc64le
is little endian.
This also enables the fuzz_test for ppc64le.
Change-Id: I59a69515703b82ad2929f68ba2f11208fa833181
Reviewed-on: https://go-review.googlesource.com/c/go/+/168478
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
If we marshal a non-pointer struct field whose type implements Marshaler with
a non-pointer receiver, then we avoid an allocation if we take the address of
the field before casting it to an interface.
name old time/op new time/op delta
EncodeMarshaler-8 104ns ± 1% 92ns ± 2% -11.72% (p=0.001 n=7+7)
name old alloc/op new alloc/op delta
EncodeMarshaler-8 36.0B ± 0% 4.0B ± 0% -88.89% (p=0.000 n=8+8)
name old allocs/op new allocs/op delta
EncodeMarshaler-8 2.00 ± 0% 1.00 ± 0% -50.00% (p=0.000 n=8+8)
Test coverage already looks good enough for this change. TestRefValMarshal
already covers all possible combinations of value & pointer receivers on
value and pointer struct fields.
Change-Id: I6fc7f72396396d98f9a90c3c86e813690f41c099
Reviewed-on: https://go-review.googlesource.com/c/go/+/203608
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Based on work by Mikaël Urankar (@MikaelUrankar).
Updates #24715
Updates #35197
Change-Id: I91144101043d67d3f8444bf8389c9606abe2a66c
Reviewed-on: https://go-review.googlesource.com/c/go/+/199919
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
_defer.fn can be nil, so we need to add a check when dumping
_defer.fn.fn.
Fixes#35172
Change-Id: Ic1138be5ec9dce915a87467cfa51ff83acc6e3a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/203697
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change improves performance of Compact by using a sync.Pool to allow re-use
of a scanner. This also has the side-effect of removing an allocation for each
field that implements Marshaler when marshalling JSON.
name old time/op new time/op delta
EncodeMarshaler-8 118ns ± 2% 104ns ± 1% -12.21% (p=0.001 n=7+7)
name old alloc/op new alloc/op delta
EncodeMarshaler-8 100B ± 0% 36B ± 0% -64.00% (p=0.000 n=8+8)
name old allocs/op new allocs/op delta
EncodeMarshaler-8 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.000 n=8+8)
Change-Id: Ic70c61a0a6354823da5220f5aad04b94c054f233
Reviewed-on: https://go-review.googlesource.com/c/go/+/200864
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There's no reason not to enable DEP in 2019, especially given Go's
minimum operating system level.
RELNOTE=yes
Change-Id: I9c3bbc5b05a1654876a218123dd57b9c9077b780
Reviewed-on: https://go-review.googlesource.com/c/go/+/203601
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
This test's existence was predicated upon assumptions about the full
range of known data types and known data into those types. However,
we've learned from Microsoft that there are several undocumented secret
registry types that are in use by various parts of Windows, and we've
learned from inspection that many Microsoft uses of registry types don't
strictly adhere to the recommended value size. It's therefore foolhardy
to make any assumptions about what goes in and out of the registry, and
so this test, as well as its "blacklist", are meaningless.
Fixes#35084
Change-Id: I6c3fe5fb0e740e88858321b3b042c0ff1a23284e
Reviewed-on: https://go-review.googlesource.com/c/go/+/203604
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Updates #35157 (the bug there was fixed by CL200861)
Change-Id: I67069207b4cdc2ad4a475dd0bbc8555ecc5f534f
Reviewed-on: https://go-review.googlesource.com/c/go/+/203598
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Sometimes, poset needs to collapse a path making all nodes in
the path aliases. For instance, we know that A<=N1<=B and we
learn that B<=A, we can deduce A==N1==B, and thus we can
collapse all paths from A to B into a single aliased node.
Currently, this is a TODO. This CL implements the path-collapsing
primitive by doing a DFS walk to build a bitset of all nodes
across all paths, and then calling the new aliasnodes that allow
to mark multiple nodes as aliases of a single master node.
This helps only 4 times in std+cmd, but it will be fundamental
when we will rely on poset to calculate numerical limits, to
calculate the correct values.
This also fixes#35157, a bug uncovered by a previous CL in this
serie. A testcase will be added soon.
Change-Id: I5fc54259711769d7bd7c2d166a5abc1cddc26350
Reviewed-on: https://go-review.googlesource.com/c/go/+/200861
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Change aliasnode into aliasnodes, to allow for recording
multiple aliases in a single pass. The nodes being aliased
are passed as bitset for performance reason (O(1) lookups).
It does look worse in the existing case of SetEqual where
we now need to allocate a bitset just for a single node,
but the new API will allow to fully implement a path-collapsing
primitive in next CL.
No functional changes, passes toolstash -cmp.
Change-Id: I06259610e8ef478106b36852464ed2caacd29ab5
Reviewed-on: https://go-review.googlesource.com/c/go/+/200860
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In preparation for allowing to make multiple nodes as aliases
in a single pass, refactor aliasnode splitting out the case
in which one of the nodes is not in the post into a new
funciton (aliasnewnode).
No functional changes, passes toolstash -cmp
Change-Id: I19ca6ef8426f8aec9f2622b6151c5c617dbb25b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/200859
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also a similar 'elapsed' function and its usages were deleted.
Fixes#19865.
Change-Id: Ib125365e69cf2eda60de64fa74290c8c7d1fd65a
Reviewed-on: https://go-review.googlesource.com/c/go/+/171730
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
ARM's R4-R8 & R10-R11 are callee-save registers, and R9
may be callee-save or not. This CL saves them at the beginning
of sigtramp and restores them in the end.
fixes#32738
Change-Id: Ib7eb80836bc074e2e6a46ae4602ba8a3b96c5456
Reviewed-on: https://go-review.googlesource.com/c/go/+/183777
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For these, we split up the existing runtime.raise assembly
implementation into its constituent "get thread ID" and "signal
thread" parts. This lets us implement signalM and reimplement raise in
pure Go. (NetBSD conveniently already had lwp_self.)
We also change minit to store the procid directly, rather than
depending on newosproc to do so. This is because newosproc isn't
called for the bootstrap M, but we need a procid for every M. This is
also simpler overall.
For #10958, #24543.
Change-Id: Ie5f1fcada6a33046375066bcbe054d1f784d39c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/201402
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We'll add a test once all of the POSIX platforms are done.
For #10958, #24543.
Change-Id: If7e3f14e8391791364877629bf415d9f8e788b0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/201401
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Previously we injected an error, and the injection points were
(empirically) not realistic on some platforms.
Instead, we now make the directory read-only, which (on most
platforms) suffices to prevent the removal of its files.
Fixes#35117
Updates #29921
Change-Id: Ica4e2818566f8c14df3eed7c3b8de5c0abeb6963
Reviewed-on: https://go-review.googlesource.com/c/go/+/203502
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
findObject takes the pointer argument as uintptr. If the pointer is to
the local stack and calling findObject happens to require the stack to
be reallocated, then spanOf is called for the old pointer.
Marking findObject as nosplit fixes the issue.
Fixes#35068
Change-Id: I029d36f9c23f91812f18f98839edf02e0ba4082e
Reviewed-on: https://go-review.googlesource.com/c/go/+/202798
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Factor out case s == nil, make the code cleaner and easier to read.
Change-Id: I63f52e14351c0a0d20a611b1fe10fdc0d4947d96
Reviewed-on: https://go-review.googlesource.com/c/go/+/202498
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
We check whether an M is preemptible in a surprising number of places.
Put it in one function.
For #10958, #24543.
Change-Id: I305090fdb1ea7f7a55ffe25851c1e35012d0d06c
Reviewed-on: https://go-review.googlesource.com/c/go/+/201439
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We're about to introduce asynchronous safe points, where we won't have
precise pointer maps for all stack frames. That's okay for scanning
the stack (conservatively), but not for shrinking the stack.
Hence, this CL prepares for this by only shrinking the stack as part
of the stack scan if the goroutine is stopped at a synchronous safe
point. Otherwise, it queues up the stack shrink for the next
synchronous safe point.
We already have one condition under which we can't shrink the stack
for very similar reasons: syscalls. Currently, we just give up on
shrinking the stack if it's in a syscall. But with this mechanism, we
defer that stack shrink until the next synchronous safe point.
For #10958, #24543.
Change-Id: Ifa1dec6f33fdf30f9067be2ce3f7ab8a7f62ce38
Reviewed-on: https://go-review.googlesource.com/c/go/+/201438
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When we copy a stack of a goroutine blocked in a channel operation, we
have to be very careful because other goroutines may be writing to
that goroutine's stack. To handle this, stack copying acquires the
locks for the channels a goroutine is waiting on.
One complication is that stack growth may happen while a goroutine
holds these locks, in which case stack copying must *not* acquire
these locks because that would self-deadlock.
Currently, stack growth never acquires these locks because stack
growth only happens when a goroutine is running, which means it's
either not blocking on a channel or it's holding the channel locks
already. Stack shrinking always acquires these locks because shrinking
happens asynchronously, so the goroutine is never running, so there
are either no locks or they've been released by the goroutine.
However, we're about to change when stack shrinking can happen, which
is going to break the current rules. Rather than find a new way to
derive whether to acquire these locks or not, this CL simply adds a
flag to the g struct that indicates that stack copying should acquire
channel locks. This flag is set while the goroutine is blocked on a
channel op.
For #10958, #24543.
Change-Id: Ia2ac8831b1bfda98d39bb30285e144c4f7eaf9ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/172982
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Currently, gcscanvalid is used to resolve a race between attempts to
scan a stack. Now that there's a clear owner of the stack scan
operation, there's no longer any danger of racing or attempting to
scan a stack more than once, so this CL eliminates gcscanvalid.
I double-checked my reasoning by first adding a throw if gcscanvalid
was set in scanstack and verifying that all.bash still passed.
For #10958, #24543.
Fixes#24363.
Change-Id: I76794a5fcda325ed7cfc2b545e2a839b8b3bc713
Reviewed-on: https://go-review.googlesource.com/c/go/+/201139
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, the process of suspending a goroutine is tied to stack
scanning. In preparation for non-cooperative preemption, this CL
abstracts this into general purpose suspendG/resumeG functions.
suspendG and resumeG closely follow the existing scang and restartg
functions with one exception: the addition of a _Gpreempted status.
Currently, preemption tasks (stack scanning) are carried out by the
target goroutine if it's in _Grunning. In this new approach, the task
is always carried out by the goroutine that called suspendG. Thus, we
need a reliable way to drive the target goroutine out of _Grunning
until the requesting goroutine is ready to resume it. The new
_Gpreempted state provides the handshake: when a runnable goroutine
responds to a preemption request, it now parks itself and enters
_Gpreempted. The requesting goroutine races to put it in _Gwaiting,
which gives it ownership, but also the responsibility to start it
again.
This CL adds several TODOs about improving the synchronization on the
G status. The existing code already has these problems; we're just
taking note of them.
The next CL will remove the now-dead scang and preemptscan.
For #10958, #24543.
Change-Id: I16dbf87bea9d50399cc86719c156f48e67198f16
Reviewed-on: https://go-review.googlesource.com/c/go/+/201137
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
mod_get_svn passes, and I also tested this manually on a real-world svn-hosted package:
example.com$ go mod init example.com
go: creating new go.mod: module example.com
example.com$ GOPROXY=direct GONOSUMDB=llvm.org go get -d llvm.org/llvm/bindings/go/llvm
go: finding llvm.org/llvm latest
go: finding llvm.org/llvm/bindings/go/llvm latest
go: downloading llvm.org/llvm v0.0.0-20191022153947-000000375505
go: extracting llvm.org/llvm v0.0.0-20191022153947-000000375505
example.com$ go list llvm.org/llvm/bindings/...
llvm.org/llvm/bindings/go
llvm.org/llvm/bindings/go/llvm
Fixes#26092
Change-Id: Iefe2151b82a0225c73bb6f8dd7cd8a352897d4c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/203497
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
CL 198544 broke the linux/arm64 build because it declares emptyfunc for
GOARCH=arm64, but only freebsd/arm64 defines it. Make it a static
assembly function specific for freebsd/arm64 and remove the stub.
Fixes#35160
Change-Id: I5fd94249b60c6fd259c251407b6eccc8fa512934
Reviewed-on: https://go-review.googlesource.com/c/go/+/203418
Reviewed-by: Bryan C. Mills <bcmills@google.com>
bradfitz is actively thinking about a proper fix.
In the meantime, skip the test to suss out any other failures in the builder.
Updates #35122
Change-Id: I9bf0640222e3d385c1a3e2be5ab52b80d3e8c21a
Reviewed-on: https://go-review.googlesource.com/c/go/+/203500
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, TestAtomicStop used a hard-coded 2-second timeout.
That empirically is not long enough on certain builders. Rather than
adjusting it to a different arbitrary value, use a slice of the
overall timeout for the test binary. If everything is working, we
won't block nearly that long anyway.
Updates #35085
Change-Id: I7b789388e3152413395088088fc497419976cf5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/203499
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We already claim on the documentation for _Grunning that this is case,
but execute transitions to _Grunning before assigning g.m. Fix this
and make the documentation even more explicit.
For #10958, #24543, but also a good cleanup.
Change-Id: I1eb0108e7762f55cfb0282aca624af1c0a15fe56
Reviewed-on: https://go-review.googlesource.com/c/go/+/201440
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, shrinkstack will not shrink a stack on Windows if
gp.m.libcallsp != 0. In general, we can't shrink stacks in syscalls
because the syscall may hold pointers into the stack, and in principle
this is supposed to be preventing that for libcall-based syscalls
(which are direct syscalls from the runtime). But this test is
actually broken and has been for a long time. That turns out to be
okay because it also appears it's not necessary.
This test is racy. g.m points to whatever M the G was last running on,
even if the G is in a blocked state, and that M could be doing
anything, including making libcalls. Hence, observing that libcallsp
== 0 at one moment in shrinkstack is no guarantee that it won't become
non-zero while we're shrinking the stack, and vice-versa.
It's also weird that this check is only performed on Windows, given
that we now use libcalls on macOS, Solaris, and AIX.
This check was added when stack shrinking was first implemented in CL
69580044. The history of that CL (though not the final version)
suggests this was necessary for libcalls that happened on Go user
stacks, which we never do now because of the limited stack space.
It could also be defending against user stack pointers passed to
libcall system calls from blocked Gs. But the runtime isn't allowed to
keep pointers into the user stack for blocked Gs on any OS, so it's
not clear this would be of any value.
Hence, this checks seems to be simply unnecessary.
Rather than simply remove it, this CL makes it defensive. We can't do
anything about blocked Gs, since it doesn't even make sense to look at
their M, but if a G tries to shrink its own stack while in a libcall,
that indicates a bug in the libcall code. This CL makes shrinkstack
panic in this case.
For #10958, #24543, since those are going to rearrange how we decide
that it's safe to shrink a stack.
Change-Id: Ia865e1f6340cff26637f8d513970f9ebb4735c6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/173724
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The x86 assembler supports an "ADJSP" pseudo-op that compiles to an
ADD/SUB from SP. Unfortunately, while this seems perfect for an
instruction that would allow obj to continue to track the SP/FP delta,
obj currently doesn't do that. As a result, FP-relative references
won't work and, perhaps worse, the pcsp table will have the wrong
frame size.
We don't currently use this instruction in any assembly or generate it
in the compiler, but this is a perfect instruction for solving a
problem in #24543.
This CL makes ADJSP useful by incorporating it into the SP delta
logic.
One subtlety is that we do generate ADJSP in obj itself to open a
function's stack frame. Currently, when preprocess enters the loop to
compute the SP delta, it may or may not start at this ADJSP
instruction depending on various factors. We clean this up by instead
always starting the SP delta at 0 and always starting this loop at the
entry to the function.
Why not just recognize ADD/SUB of SP? The danger is that could change
the meaning of existing code. For example, walltime1 in
sys_linux_amd64.s saves SP, SUBs from it, and aligns it. Later, it
restores the saved copy and then does a few FP-relative references.
Currently obj doesn't know any of this is happening, but that's fine
once it gets to the FP-relative references. If we taught obj to
recognize the SUB, it would start to miscompile this code. An
alternative would be to recognize unknown instructions that write to
SP and refuse subsequent FP-relative references, but that's kind of
annoying.
This passes toolstash -cmp for std on both amd64 and 386.
Change-Id: Ic6c6a7cbf980bca904576676c07b44c0aaa9c82d
Reviewed-on: https://go-review.googlesource.com/c/go/+/200877
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
According to MSDN, "If the data has the REG_SZ, REG_MULTI_SZ or
REG_EXPAND_SZ type, this size includes any terminating null character or
characters unless the data was stored without them. [...] If the data
has the REG_SZ, REG_MULTI_SZ or REG_EXPAND_SZ type, the string may not
have been stored with the proper terminating null characters. Therefore,
even if the function returns ERROR_SUCCESS, the application should
ensure that the string is properly terminated before using it;
otherwise, it may overwrite a buffer."
It's therefore dangerous to pass it off unbounded as we do, and in fact
this led to crashes on real systems.
Change-Id: I6d786211814656f036b87fd78631466634cd764a
Reviewed-on: https://go-review.googlesource.com/c/go/+/202937
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
There were a couple of bugs, including not requiring a percent and
returning the wrong error for a bad format containing %%.
Both are addressed by fixing the first.
Fixes#34180.
Change-Id: If96c0c0258bcb95eec49871437d719cb9d399d9b
Reviewed-on: https://go-review.googlesource.com/c/go/+/202879
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, codehost.Repo.ReadZip returned an 'actualSubdir' value
that was the empty string in all current implementations.
Updates #26092
Change-Id: I6708dd0f13ba88bcf1a1fb405e9d818fd6f9197e
Reviewed-on: https://go-review.googlesource.com/c/go/+/203277
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
