Check all arguments for validity once, in the beginning.
Conservatively replace arg(x, i) calls with *x = args[i].
Use y (2nd arguments) directly, w/o copying.
Remove unnecessary copies and slice creations in append.
Change-Id: I1e2891cba9658f5b3cdf897e81db2f690a99b16b
Reviewed-on: https://go-review.googlesource.com/c/go/+/495515
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
This reverts CL 495596.
Reason for revert: duplicate symbol failures in x/tools and random PPC crashes.
Change-Id: I57305f8e72ee1567dc5a6a829c2d70fb5719028a
Reviewed-on: https://go-review.googlesource.com/c/go/+/496185
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This test was introduced in CL 18882, but only recently enabled as of
CL 493603. It's intended to check that we don't move executing C code
between threads when it re-enters Go, but it has always contained a
flake. Go *can* preempt between the Go call to gettid and the C call
to gettid and move the goroutine to another thread because there's no
C code on the stack during the Go call to gettid. This will cause the
test to fail.
Fix this by making both gettid calls in C, with a re-entry to Go
between them.
Fixes#60265
Change-Id: I546621a541ce52b996d68b17d3bed709d2b5b1f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/496182
Auto-Submit: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Fix formatting mistakes in my previous CLs -- a missing code tag
and a broken comment tag.
Change-Id: I7f558f59b4e8fe9cb398d0093e5389b968d89eb3
Reviewed-on: https://go-review.googlesource.com/c/go/+/496115
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Auto-Submit: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
The asynchronous call to processFile is synchronized by the call to
GetExitCode. We can't safely access errBuf until then, because
processFile may still be writing to it.
This is diagnosed by 'go test -race cmd/gofmt', but only the
darwin-amd64-race builder caught it because the other "-race" builders
apparently all run as root (see #10719).
Updates #60225.
Change-Id: Ie66bb4e47429ece81043d6425f26953b7bb26002
Reviewed-on: https://go-review.googlesource.com/c/go/+/496155
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
To allow skipping the use of the copy_file_range syscall on Linux which
isn't supported for destination files opened with O_APPEND, see comment
in (*File).readFrom and
https://man7.org/linux/man-pages/man2/copy_file_range.2.html#ERRORSFixes#60181
Change-Id: Ie0b0050faab16858412928a3d1f96442619581eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/494915
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
This will allow to use the fcntl syscall in packages other than
internal/poll.
For #60181
Change-Id: I76703766a655f2343c61dad95faf81aad58e007f
Reviewed-on: https://go-review.googlesource.com/c/go/+/494916
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
ARM64 doesn't have MOVNP/MOVNPW and STLP/STLPW instructions, which are
currently useless instructions as well. This CL deletes them. At the
same time this CL sorts the opcodes by name, which looks cleaner.
Change-Id: I25cfb636b23356ba0a50cba527a8c85b3f7e2ee4
Reviewed-on: https://go-review.googlesource.com/c/go/+/495695
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Eric Fang <eric.fang@arm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This enables the implementation for proposal #58671, which is
a likely accept. By enabling it early we get a bit extra soak
time for this feature. The change can be reverted trivially, if
need be.
For #58671.
Change-Id: Id6c27515e45ff79f4f1d2fc1706f3f672ccdd1ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/495955
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reapplies CL 485500, with a fix drafted in CL 492987 incorporated.
CL 485500 is reverted due to #60004 and #60007. #60004 is fixed in
CL 492743. #60007 is fixed in CL 492987 (incorporated in this CL).
[Original CL 485500 description]
This reapplies CL 481061, with the followup fixes in CL 482975, CL 485315, and
CL 485316 incorporated.
CL 481061, by doujiang24 <doujiang24@gmail.com>, speed up C to Go
calls by binding the M to the C thread. See below for its
description.
CL 482975 is a followup fix to a C declaration in testprogcgo.
CL 485315 is a followup fix for x_cgo_getstackbound on Illumos.
CL 485316 is a followup cleanup for ppc64 assembly.
CL 479915 passed the G to _cgo_getstackbound for direct updates to
gp.stack.lo. A G can be reused on a new thread after the previous thread
exited. This could trigger the C TSAN race detector because it couldn't
see the synchronization in Go (lockextra) preventing the same G from
being used on multiple threads at the same time.
We work around this by passing the address of a stack variable to
_cgo_getstackbound rather than the G. The stack is generally unique per
thread, so TSAN won't see the same address from multiple threads. Even
if stacks are reused across threads by pthread, C TSAN should see the
synchonization in the stack allocator.
A regression test is added to misc/cgo/testsanitizer.
[Original CL 481061 description]
This reapplies CL 392854, with the followup fixes in CL 479255,
CL 479915, and CL 481057 incorporated.
CL 392854, by doujiang24 <doujiang24@gmail.com>, speed up C to Go
calls by binding the M to the C thread. See below for its
description.
CL 479255 is a followup fix for a small bug in ARM assembly code.
CL 479915 is another followup fix to address C to Go calls after
the C code uses some stack, but that CL is also buggy.
CL 481057, by Michael Knyszek, is a followup fix for a memory leak
bug of CL 479915.
[Original CL 392854 description]
In a C thread, it's necessary to acquire an extra M by using needm while invoking a Go function from C. But, needm and dropm are heavy costs due to the signal-related syscalls.
So, we change to not dropm while returning back to C, which means binding the extra M to the C thread until it exits, to avoid needm and dropm on each C to Go call.
Instead, we only dropm while the C thread exits, so the extra M won't leak.
When invoking a Go function from C:
Allocate a pthread variable using pthread_key_create, only once per shared object, and register a thread-exit-time destructor.
And store the g0 of the current m into the thread-specified value of the pthread key, only once per C thread, so that the destructor will put the extra M back onto the extra M list while the C thread exits.
When returning back to C:
Skip dropm in cgocallback, when the pthread variable has been created, so that the extra M will be reused the next time invoke a Go function from C.
This is purely a performance optimization. The old version, in which needm & dropm happen on each cgo call, is still correct too, and we have to keep the old version on systems with cgo but without pthreads, like Windows.
This optimization is significant, and the specific value depends on the OS system and CPU, but in general, it can be considered as 10x faster, for a simple Go function call from a C thread.
For the newly added BenchmarkCGoInCThread, some benchmark results:
1. it's 28x faster, from 3395 ns/op to 121 ns/op, in darwin OS & Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz
2. it's 6.5x faster, from 1495 ns/op to 230 ns/op, in Linux OS & Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz
[CL 479915 description]
Currently, when C calls into Go the first time, we grab an M
using needm, which sets m.g0's stack bounds using the SP. We don't
know how big the stack is, so we simply assume 32K. Previously,
when the Go function returns to C, we drop the M, and the next
time C calls into Go, we put a new stack bound on the g0 based on
the current SP. After CL 392854, we don't drop the M, and the next
time C calls into Go, we reuse the same g0, without recomputing
the stack bounds. If the C code uses quite a bit of stack space
before calling into Go, the SP may be well below the 32K stack
bound we assumed, so the runtime thinks the g0 stack overflows.
This CL makes needm get a more accurate stack bound from
pthread. (In some platforms this may still be a guess as we don't
know exactly where we are in the C stack), but it is probably
better than simply assuming 32K.
[CL 492987 description]
On the first call into Go from a C thread, currently we set the g0
stack's high bound imprecisely based on the SP. With CL 485500, we
keep the M and don't recompute the stack bounds when it calls into
Go again. If the first call is made when the C thread uses some
deep stack, but a subsequent call is made with a shallower stack,
the SP may be above g0.stack.hi.
This is usually okay as we don't check usually stack.hi. One place
where we do check for stack.hi is in the signal handler, in
adjustSignalStack. In particular, C TSAN delivers signals on the
g0 stack (instead of the usual signal stack). If the SP is above
g0.stack.hi, we don't see it is on the g0 stack, and throws.
This CL makes it get an accurate stack upper bound with the
pthread API (on the platforms where it is available).
Also add some debug print for the "handler not on signal stack"
throw.
Fixes#51676.
Fixes#59294.
Fixes#59678.
Fixes#60007.
Change-Id: Ie51c8e81ade34ec81d69fd7bce1fe0039a470776
Reviewed-on: https://go-review.googlesource.com/c/go/+/495855
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
When gofmt needs to rewrite a file, it first copies it into a backup.
If the rewrite fails, it used to rename the backup to the original.
However, if for some reason the file is owned by some other user,
and if the rewrite fails because gofmt doesn't have permission to
write to the file, then renaming the backup file will change
the file owner. This CL changes gofmt so that if it fails to rewrite
a file, it tries to write the original contents. If writing the original
content fails, it reports the problem to the user referring to the
backup file, rather than trying a rename.
Also create the backup file with the correct permissions,
to avoid a tiny gap when some process might get write access to the
file contents that it shouldn't have. (This tiny gap only applies to
files that are not formatted correctly, and have read-only permission,
and are in a directory with write permission.)
Fixes#60225
Change-Id: Ic16dd0c85cf416d6b2345e0650d5e64413360847
Reviewed-on: https://go-review.googlesource.com/c/go/+/495316
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
For #58408Fixes#60211
Change-Id: I30f5678b46e15121865b19d1c0f82698493fad4e
Reviewed-on: https://go-review.googlesource.com/c/go/+/495079
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
I think there is a theoretical possibility of a mistake before this CL.
pollCache.free would increment fdseq, but would not update atomicInfo.
The epoll code could compare to fdseq before the increment, but suspend
before calling setEventErr. The pollCache could get reallocated,
and pollOpen could clear eventErr. Then the setEventErr could continue
and set it again. Then pollOpen could call publishInfo.
Avoid this rather remote possibility by calling publishInfo after
incrementing fdseq. That ensures that delayed setEventErr will not
modify the eventErr flag.
Fixes#60133
Change-Id: I69e336535312544690821c9fd53f3023ff15b80c
Reviewed-on: https://go-review.googlesource.com/c/go/+/495297
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
these address comments on CLs in the large refactoring stack
recently submitted.
Change-Id: Ic9023c32aafe4dda953b42c9a36834d3ab3432eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/495835
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This enables JSON output for all tests run by dist.
Most the complexity here is that, in order to disambiguate JSON
records from different package variants, we have to rewrite the JSON
stream on the fly to include variant information. We do this by
rewriting the Package field to be pkg:variant so existing CI systems
will naturally pick up the disambiguated test name.
Fixes#37486.
Change-Id: I0094e5e27b3a02ffc108534b8258c699ed8c3b87
Reviewed-on: https://go-review.googlesource.com/c/go/+/494958
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Currently, all uses of rtPreFunc are to print a message and skip a
test. When we move to JSON, the logic to just "print a message" is
going to be more complicated, so refactor this so the function returns
the skip message and we print it in just one place. We also rename the
option to rtSkipFunc to better represent what we use it for.
For #37486.
Change-Id: Ibd537064fa646a956a1c0f85a5d8c6febd098dde
Reviewed-on: https://go-review.googlesource.com/c/go/+/495856
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Many of the commands dist test executes are "background" commands run
by a work queue system. The work queue allows it to run commands in
parallel, but still serialize their output. Currently, the work queue
system assumes that exec.Cmd.Stdout and Stderr will be nil and that it
can take complete control over them.
We're about to inject output filters on many of these commands, so we
need a way to interpose on Stdout and Stderr. This CL rearranges
responsibilities in the work queue system to make that possible. Now,
the thing enqueuing the work item is responsible to constructing the
Cmd to write its output to work.out. There's only one place that
constructs work objects (there used to be many more), so that's
relatively easy, and sets us up to add filters.
For #37486.
Change-Id: I55ab71ddd456a12fdbf676bb49f698fc08a5689b
Reviewed-on: https://go-review.googlesource.com/c/go/+/494957
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
There are no uses of addCmd, so delete it. The only use of bgDirCmd is
dirCmd, so inline it. Now the only function that interacts with the
work queue is registerTest and dist's "background commands" are used
exclusively in goTest.bgCommand and registerTest (which calls
goTest.bgCommand).
For #37486.
Change-Id: Iebbb24cf9dbee45f3975fe9504d858493e1cd947
Reviewed-on: https://go-review.googlesource.com/c/go/+/494956
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Pull in CL 492990. This teaches 'go mod tidy' and other go subcommands
that write go.mod files to use semantic sort for exclude blocks, gated
on said files declaring Go version 1.21 or higher.
go get golang.org/x/mod@e7bea8f1d64f # includes CL 492990
go mod tidy
go mod vendor
Fixes#60028.
Change-Id: Ia9342dcc23cd68de068a70657b59c25f69afa381
Reviewed-on: https://go-review.googlesource.com/c/go/+/494578
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
This change wraps the errors from the CharsetReader function so the caller can distinguish different error conditions.
Context: I have an XML file with an unknown encoding which I like to handle separately. I like to use the CharsetReader for this but the error type has not been forwarded.
Change-Id: I6739a0dee04ec376cd20536be2806ce7f50c5213
GitHub-Last-Rev: ada9dd510f
GitHub-Pull-Request: golang/go#60199
Reviewed-on: https://go-review.googlesource.com/c/go/+/494897
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
sysBlockTraced is a subtle and confusing flag.
Currently, it's only used in one place: a condition around whether to
traceGoSysExit when a goroutine is about to start running. That condition
looks like "gp.syscallsp != 0 && gp.trace.sysBlockTraced".
In every case but one, "gp.syscallsp != 0" is equivalent to
"gp.trace.sysBlockTraced."
That one case is where a goroutine is running without a P and racing
with trace start (world is stopped). It switches itself back to
_Grunnable from _Gsyscall before the trace start goroutine notices, such
that the trace start goroutine fails to emit a EvGoInSyscall event for
it (EvGoInSyscall or EvGoSysBlock must precede any EvGoSysExit event).
sysBlockTraced is set unconditionally on every syscall entry and the
trace start goroutine clears it if there was no EvGoInSyscall event
emitted (i.e. did not observe _Gsyscall on the goroutine). That way when
the goroutine-without-a-P wakes up and gets scheduled, it only emits
EvGoSysExit if the flag is set, i.e. trace start didn't _clear_ the
flag.
What makes this confusing is the fact that the flag is set
unconditionally and the code relies on it being *cleared*. Really, all
it's trying to communicate is whether the tracer is aware of a
goroutine's syscall at the point where a goroutine that lost its P
during a syscall is trying to run again.
Therefore, we can replace this flag with a less subtle one:
tracedSyscallEnter. It is set when GoSysCall is traced, indicating on
the goroutine that the tracer is aware of the syscall. Later, if
traceGoSysExit is called, the tracer knows its safe to emit an event
because the tracer is aware of the syscall.
This flag is then also set at trace start, when it emits EvGoInSyscall,
which again, lets the goroutine know the tracer is aware of its syscall.
The flag is cleared by GoSysExit to indicate that the tracer is no
longer aware of any syscalls on the goroutine. It's also cleared by
trace start. This is necessary because a syscall may have been started
while a trace was stopping. If the GoSysExit isn't emitted (because it
races with the trace end STW) then the flag will be left set at the
start of the next trace period, which will result in an erroneous
GoSysExit. Instead, the flag is cleared in the same way sysBlockTraced
is today: if the tracer doesn't notice the goroutine is in a syscall, it
makes that explicit to the goroutine.
A more direct flag to use here would be one that explicitly indicates
whether EvGoInSyscall or EvGoSysBlock specifically were already emitted
for a goroutine. The reason why we don't just do this is because setting
the flag when EvGoSysBlock is emitted would be racy: EvGoSysBlock is
emitted by whatever thread is stealing the P out from under the
syscalling goroutine, so it would need to synchronize with the goroutine
its emitting the event for.
The end result of all this is that the new flag can be managed entirely
within trace.go, hiding another implementation detail about the tracer.
Tested with `stress ./trace.test -test.run="TestTraceStressStartStop"`
which was occasionally failing before the CL in which sysBlockTraced was
added (CL 9132). I also confirmed also that this test is still sensitive
to `EvGoSysExit` by removing the one use of sysBlockTraced. The result
is about a 5% error rate. If there is something very subtly wrong about
how this CL emits `EvGoSysExit`, I would expect to see it as a test
failure. Instead:
53m55s: 200434 runs so far, 0 failures
Change-Id: If1d24ee6b6926eec7e90cdb66039a5abac819d9b
Reviewed-on: https://go-review.googlesource.com/c/go/+/494715
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Michael Knyszek <mknyszek@google.com>
Just another step to hiding implementation details.
Change-Id: I71b7cc522d18c23f03a9bf32e428279e62b39a89
Reviewed-on: https://go-review.googlesource.com/c/go/+/494192
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
In race mode (or other instrumentation mode), if the caller is in
a regular package and the callee is in a norace (or noinstrument)
package, don't inline. Otherwise, when the caller is instumented
it will also affect the inlined callee.
An example is sync.(*Mutex).Unlock, which is typically not inlined
but with PGO it can be inlined into a regular function, which is
then get instrumented. But the rest of the sync package, in
particular, the Lock function is not instrumented, causing the
race detector to signal false race.
Change-Id: Ia78bb602c6da63a34ec2909b9a82646bf20873f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/495595
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
More tightening up of the tracer's interface.
Change-Id: I992141c7f30e5c2d5d77d1fcd6817d35bc6e5f6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/494191
Auto-Submit: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
More tightening up of the tracer's interface.
While we're here, clarify why waittraceskip isn't included by explaining
what the wait* fields in the M are really for.
Change-Id: I0e7b4cac79fb77a7a0b3ca6b6cc267668e3610bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/494190
Auto-Submit: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
More tightening up of the tracer's interface.
This increases the size of each G very slightly, which isn't great, but
we stay within the same size class, so actually memory use will be
unchanged.
Change-Id: I7d1f5798edcf437c212beb1e1a2619eab833aafb
Reviewed-on: https://go-review.googlesource.com/c/go/+/494188
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Give the test a bit more wiggle room.
Previously the allowed range was about 46.5% to 53.5%. Now it is about 43% TO 57%.
Fixes#60170
Change-Id: Ieda471e0986c52edb9f6d31beb8e41917876d6c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/495415
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
In the interest of further cleaning up the trace.go API, move the trace
logic in oneNewExtraM into its own function.
Change-Id: I5cf478cb8cd0d301ee3b068347ed48ce768b8882
Reviewed-on: https://go-review.googlesource.com/c/go/+/494186
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
method -> Method
For #59670
Change-Id: I78e0410f3d5094aa12b2f3ccd6735fec0d696190
Reviewed-on: https://go-review.googlesource.com/c/go/+/494795
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Prior to this change, 'go get' pulled in every version of each module
whose path is explicitly listed in the go.mod file. When graph pruning
is enabled (that is, when the main module is at 'go 1.17' or higher),
that pulled in transitive dependencies of older-than-selected versions
of dependencies, which are normally pruned out by other 'go' commands
(including 'go mod tidy' and 'go mod graph').
To make matters worse, different parts of `go get` were making
different assumptions about which kinds of conflicts would be
reported: the modget package assumed that any conflict is necessarily
due to some explicit constraint, but 'go get' was imposing an
additional constraint that modules could not be incidentally upgraded
in the course of a downgrade. When that additional constraint failed,
the modload package reported the failure as though it were a real
(caller-supplied) constraint, confusing the caller (which couldn't
identify any specific package or argument that caused the failure).
This change fixes both of those problems by replacing the
modload.EditRequirements algorithm with a different one.
The new algorithm is, roughly, as follows.
1. Propose a list of “root requirements” to be written to the updated
go.mod file.
2. Load the module graph from those requirements mostly as usual, but
if any root is upgraded due to transitive dependencies, retain the
original roots and the paths leading from those roots to the
upgrades. (This forms an “extended graph”, in which we can trace a
path from to each version that appears in the graph starting at one
or more of the original roots.)
3. Identify which roots caused any module path to be upgraded above
its passed-in version constraint. For each such root, either report
an unresolvable conflict (if the root itself is constrained to a
specific version) or identify an updated version to propose: either
a downgrade to the next-highest version, or an upgrade to the
actually-selected version of the root (if that version is allowed).
To avoid looping forever or devolving into an NP-complete search,
we never propose a version that was already rejected previously,
regardless of what other roots were present alongside it at the
time.
4. If the version of any root was changed, repeat from (1).
This algorithm is guaranteed to terminate, because there are finitely
many root versions and we permanently reject at least one each time we
downgrade its path to a lower version.
In addition, this change implements support for the '-v' flag to log
more information about version changes at each iteration.
Fixes#56494.
Fixes#55955.
Change-Id: Iebc17dd7586594d5732e228043c3c4c6da230f44
Reviewed-on: https://go-review.googlesource.com/c/go/+/471595
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Clean up and consolidate on a single consistent definition of fcntl,
which takes three int32 arguments and returns either a positive result
or a negative errno value.
Change-Id: Id9505492712db4b0aab469c6bd15e4fce3c9ff6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/495075
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
At least when we're inserting/replacing near the end of a slice, when
we have to grow it use the same multiplicative growth factor that the
runtime uses for append.
Before this CL, we would grow the slice one page (8192 bytes) at a time
for large slices. This would cause O(n^2) work when appending near the
end should only take O(n) work.
This doesn't fix the problem if you insert/replace near the start of the
array, but maybe that doesn't need fixing because it is O(n^2) anyway.
Fixes#60134
Change-Id: If05376bc512ab839769180e5ce4cb929f47363b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/495296
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Handle cases where the inserted slice is actually part of the slice
that is being inserted into.
Requires a bit more work, but no more allocations. (Compare to #494536.)
Not entirely sure this is worth the complication.
Fixes#60138
Change-Id: Ia72c872b04309b99025e6ca5a4a326ebed2abb69
Reviewed-on: https://go-review.googlesource.com/c/go/+/494817
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
This CL changes Checker.genericExprList such that it collects partially
instantiated generic functions together with their (partial) type
argument (and corresponding) expression lists, instead of trying to
infer the missing type arguments in place or to report an error.
Special care is being taken to explictly record expression types where
needed (because we can't use one of the usual expr evaluators which
takes care of that), or to track the correct instance expression for
later recording with Checker.arguments.
The resulting generic expression list is passed to Checker.arguments
which is changed to accept explicit partial type argument (and
corresponding) expression lists. The provided type arguments are fed
into type inference, matching up with their respective type parameters
(which were collected already, before this CL). If type inference is
successful, the instantiated functions are recorded as needed.
For now, the type argument expression lists are collected and passed
along but not yet used. We may use them eventually for better error
reporting.
Fixes#59958.
For #59338.
Change-Id: I26db47ef3546e64553da49d62b23cd3ef9e2b549
Reviewed-on: https://go-review.googlesource.com/c/go/+/494116
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
There's only two places which call Checker.arguments: Checker.callExpr
and Checker.builtin. Both ensure that the passed argument list doesn't
contain type expressions, so we don't need that extra check at the start
of Checker.arguments.
The remaining check causes Checker.arguments to exit early if any of
the passed arguments is invalid. This reduces the number of reported
errors in rare cases but is executed all the time.
If the extra errors are a problem, it would be better to not call
Checker.arguments in the first place, or only do the extra check
before Checker.arguments reports an error.
Removing this code for now. Removes a long-standing TODO.
Change-Id: Ief654b680eb6b6a768bb1b4c621d3c8169953f17
Reviewed-on: https://go-review.googlesource.com/c/go/+/495395
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
With the exception of the shortcircuit pass, removePhiArg is always unconditionally followed by phiElimValue.
Move the phiElimValue inside removePhiArg.
Resolves a TODO.
See CL 357964 for more info.
Change-Id: I8460b35864f4cd7301ba86fc3dce08ec8041da7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/465435
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Jakub Ciolek <jakub@ciolek.dev>
With CL 408826, CL 413474, etc. reflect.ValueOf no longer
unconditionally escapes its argument, allowing a Value's content
to be allocated on the stack.
Change-Id: I3a0af85c11e2fd0df42b056095565f0ce5548886
Reviewed-on: https://go-review.googlesource.com/c/go/+/494657
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
In the types1 universe, we only need to represent value types. For
interfaces, this means we only need to worry about pure interfaces. A
pure interface can embed a union type, but the overall union must be
equivalent to "any".
In go.dev/cl/458619, we changed the types1 reader to return "any", but
to incorporate a consistency check to make sure this is valid.
Unfortunately, a pure interface can actually still reference impure
interfaces, and in general this is hard to check precisely without
reimplementing a lot of types2 data structures and logic into types1.
We haven't had any other reports of this check failing since 1.20, so
it seems simplest to just suppress for now.
Fixes#60117.
Change-Id: I5053faafe2d1068c6d438b2193347546bf5330cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/495455
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
running on cmd/compile/internal/testdata/inlines now shows:
```
--- change set #1 (enabling changes causes failure)
b/b.go:16:6: loop variable i now per-iteration (loop inlined into b/b.go:10)
b/b.go:16:6: loop variable i now per-iteration
./b/b.go:16:6: loop variable b.i now per-iteration (loop inlined into a/a.go:18)
./b/b.go:16:6: loop variable b.i now per-iteration (loop inlined into ./main.go:37)
./b/b.go:16:6: loop variable b.i now per-iteration (loop inlined into ./main.go:38)
---
```
and
```
--- change set #2 (enabling changes causes failure)
./main.go:27:6: loop variable i now per-iteration
./main.go:27:6: loop variable i now per-iteration (loop inlined into ./main.go:35)
---
```
Still unsure about the utility of mentioning the inlined occurrence, but better
than mysteriously repeating the line over and over again.
Change-Id: I357f5d419ab4928fa316f4612eec3b75e7f8ac34
Reviewed-on: https://go-review.googlesource.com/c/go/+/494296
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: David Chase <drchase@google.com>
Specifically, objects built via cgo using CGO_CFLAGS="-O2 -g -mcpu=power10".
These use new relocations defined by ELFv2 1.5, and the R_PPC64_REL24_NOTOC
relocation. These objects contain functions which may not use a TOC
pointer requiring the insertion of trampolines to use correctly.
The relocation targets of these ELFv2 objects may also contain non-zero
values. Clear the relocated bits before setting them.
Extra care is taken if GOPPC64 < power10. The R_PPC64_REL24_NOTOC reloc
existed prior to ELFv2 1.5. The presence of this relocation itself does
not imply a power10 target. Generate power8 compatible stubs if
GOPPC64 < power10.
Updates #44549
Change-Id: I06ff8c4e47ed9af835a7dcfbafcfa4c538f75544
Reviewed-on: https://go-review.googlesource.com/c/go/+/492617
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
