Failures here don't otherwise affect the build, but they do cause a
slow file leak in the user's temp directory. The user deserves at
least a cursory warning that something may be amiss.
Updates #30789
Change-Id: Id0e72b1967e7f7c88cdc94d532554496653f264b
Reviewed-on: https://go-review.googlesource.com/c/go/+/171764
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
procresize is rather ungainly because it includes all of the code to
initialize new Ps and tear down unused Ps. Pull these out into their
own methods on the p type. This also tweaks the initialization loop in
procresize so we only initialize new Ps (and Ps we previously
destroyed) rather than asking each P "have you been initialized?"
This is for #10958 and #24543, but it's also just a nice cleanup.
Change-Id: Ic1242066f572c94a23cea8ea4dc47c918e31d559
Reviewed-on: https://go-review.googlesource.com/c/go/+/171762
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The code to swap RemoveAllTestHook in and out in
TestRemoveAllWithMoreErrorThanReqSize was making a copy of the
RemoveAllTestHook pointer, then attempting to restore by loading from
the copy of that pointer. Since the two copies of the pointer aliased
the same address, the restore operation had no effect, and any
RemoveAll tests that happened to run after
TestRemoveAllWithMoreErrorThanReqSize would fail.
Fixes#31421
Change-Id: I7028475f5ceb3b0a2fa69d22af8d3379508c4531
Reviewed-on: https://go-review.googlesource.com/c/go/+/171777
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For a failed interface conversion not in ",ok" form, getitab
calls itab.init to get the name of the missing method for the
panic message. itab.init will try to find the methods, populate
the method table as it goes. When some method is missing, it sets
itab.fun[0] to 0 before return. There is a small window that
itab.fun[0] could be non-zero.
If concurrently, another goroutine tries to do the same interface
conversion, it will read the same itab's fun[0]. If this happens
in the small window, it sees a non-zero fun[0] and thinks the
conversion succeeded, which is bad.
Fix the race by setting fun[0] to non-zero only when we know the
conversion succeeds. While here, also simplify the syntax
slightly.
Fixes#31419.
Change-Id: Ied34d3043079eb933e330c5877b85e13f98f1916
Reviewed-on: https://go-review.googlesource.com/c/go/+/171759
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
freebsd and netbsd require a minimum buffer size of 1K.
Note this doesn't quite fix freebsd, it has other bugs,
I'll file a separate issue.
Fixes#31403
Change-Id: I9d7e78f6d30859b34715afadc4b8bd3b1ecc606b
Reviewed-on: https://go-review.googlesource.com/c/go/+/171757
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These workarounds predate proper DWARF support
and are no longer necessary.
Before this patch, running `/usr/bin/symbols go.o`
using the object in the c-archive would fail, causing
App Store rejections.
Fixes#31022#28997
Change-Id: I6a210b6369c13038777c6e21e874e81afcb50c2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/170377
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently which treap a span should be inserted into/removed from is
checked by looking at the span's properties. This logic is repeated in
four places. As this logic gets more complex, it makes sense to
de-duplicate this, so introduce treapForSpan instead which captures this
logic by returning the appropriate treap for the span.
For #30333.
Change-Id: I4bd933d93dc50c5fc7c7c7f56ceb95194dcbfbcc
Reviewed-on: https://go-review.googlesource.com/c/go/+/170857
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change exports the runtime mTreap in export_test.go and then adds a
series of tests which check that the invariants of the treap are
maintained under different operations. These tests also include tests
for the treap iterator type.
Also, we note that the find() operation on the treap never actually was
best-fit, so the tests just ensure that it returns an appropriately
sized span.
For #30333.
Change-Id: If81f7c746dda6677ebca925cb0a940134701b894
Reviewed-on: https://go-review.googlesource.com/c/go/+/164100
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently when coalescing if two adjacent spans are scavenged, we
subtract their sizes from memstats and re-scavenge the new combined
span. This is wasteful however, since the realignment semantics make
this case of having to re-scavenge impossible.
In realign() inside of coalesce(), there was also a bug: on systems
where physPageSize > pageSize, we wouldn't realign because a condition
had the wrong sign. This wasteful re-scavenging has been masking this
bug this whole time. So, this change fixes that first.
Then this change gets rid of the needsScavenge logic and instead checks
explicitly for the possibility of unscavenged pages near the physical
page boundary. If the possibility exists, it throws. The intent of
throwing here is to catch changes to the runtime which cause this
invariant to no longer hold, at which point it would likely be
appropriate to scavenge the additional pages (and only the additional
pages) at that point.
Change-Id: I185e3d7b53e36e90cf9ace5fa297a9e8008d75f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/158377
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This allows passing custom LDFLAGS while building the bootstrapping
tool.
Afterwards, GO_LDFLAGS will be used as usual.
Change-Id: I1e224e3ce8bf7b2ce1ef8fec1894720338f04396
GitHub-Last-Rev: 17d40dc2dd
GitHub-Pull-Request: golang/go#31298
Reviewed-on: https://go-review.googlesource.com/c/go/+/171037
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
golang.org/cl/121255 added close and re-open the directory when looping, prevent
us from missing some if previous iteration deleted files.
The CL introdued a bug. If we can not delete all entries in one request,
the looping never exits, causing RemoveAll hangs.
To fix that, simply discard the entries if we can not delete all of them
in one iteration, then continue reading entries and delete them.
Also make sure removeall_at return first error it encounters.
Fixes#29921
Change-Id: I8ec3a4c822d8d2d95d9f1ab71547879da395bc4a
Reviewed-on: https://go-review.googlesource.com/c/go/+/171099
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Multiple calls to ReadDirent expect to return subsequent
portions of the directory listing. There's no place to store
our progress other than the file descriptor offset.
Fortunately, the file descriptor offset doesn't need to be
a real offset. We can store any int64 we want there.
Fixes#31368
Change-Id: I49e4e0e7ff707d3e96aa5d43e3b0199531013cde
Reviewed-on: https://go-review.googlesource.com/c/go/+/171477
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The check of MADD&MSUB was added to the function IsMIPSMUL in
a previous commit, and the comments should also be updated.
Change-Id: I2d3da055d55b459b908714c542dff99ab5c6cf99
Reviewed-on: https://go-review.googlesource.com/c/go/+/171102
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 170955 set tlsg to the Android Q free TLS slot offset in the linker
data (16 on amd64, 8 on 386), offsetting all TLS relative access.
We need the 0'th slot (TLS_SLOT_SELF) at initialization, so
compensate with a corresponding negative offset.
Fixes the android/386 and android/amd64 builders broken by CL 170955.
Change-Id: I9882088c0c8bc6a777d2aabc9404cb76f02b6cea
Reviewed-on: https://go-review.googlesource.com/c/go/+/170956
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
An instruction that references TLS, e.g.
MOVQ 0(TLS), AX
on some platforms (e.g. Android), or in shared mode, may be
translated to (assuming TLS offset already loaded to CX)
MOVQ 0(CX)(TLS*1), AX
which in turns translates to
movq %fs:(%rcx), %rax
We have rejected non-zero offset for TLS reference, like 16(TLS).
Actually, the instruction can take offset, i.e. it is a valid
instruction for, e.g.,
movq %fs:16(%rcx),%rcx
So, allow offset in TLS reference.
Change-Id: Iaf1996bad7fe874e0c298ea441af5acb136a4028
Reviewed-on: https://go-review.googlesource.com/c/go/+/171151
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A goroutine should be preempted if it runs for 10ms without blocking.
We found that this doesn't work for goroutines which call short system calls.
For example, the next program can stuck for seconds without this fix:
$ cat main.go
package main
import (
"runtime"
"syscall"
)
func main() {
runtime.GOMAXPROCS(1)
c := make(chan int)
go func() {
c <- 1
for {
t := syscall.Timespec{
Nsec: 300,
}
if true {
syscall.Nanosleep(&t, nil)
}
}
}()
<-c
}
$ time go run main.go
real 0m8.796s
user 0m0.367s
sys 0m0.893s
Updates #10958
Change-Id: Id3be54d3779cc28bfc8b33fe578f13778f1ae2a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/170138
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change renames the temporary directory prefix for testing to
go-testcover from gotestcover. It looks like other packages have the
"go-" prefix for temporary directories, such as go-build, go-tool-dist
and go-nettest.
Change-Id: I91ab570d33c4c1bb48e6e01451a811272f6f8b77
Reviewed-on: https://go-review.googlesource.com/c/go/+/171100
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change is mostly cosmetic.
OINDREGSP was used only for reading the results of a function call.
In recognition of that fact, rename it to ORESULT.
Along the way, trim down our handling of it to the bare minimum,
and rely on the increased clarity of ORESULT to inline nodarg.
Passes toolstash-check.
Change-Id: I25b177df4ea54a8e94b1698d044c297b7e453c64
Reviewed-on: https://go-review.googlesource.com/c/go/+/170705
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When buildmode=pie, external linking is forced, and our toolchain build id
will be included in the external build id, resulting in the building of
a toolchain tool will never reach a fixed point id.
More importantly, this change will make make.bash converge on self-hosted
Android builds (Android refuses to run non-PIE executables).
Fixes#31320
Updates #18968
Change-Id: Icb5db9f4b1b688afe37f4dafe261ffda580fa4e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/170942
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Android Q frees a static TLS slot for us to use. Use the offset of
that slot as the default for our TLS offset.
As a result, runtime/cgo is no more a requirement for Android Q and
newer.
Updates #31343
Updates #29674
Change-Id: I759049b2e2865bd3d4fdc05a8cfc6db8b0da1f5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/170955
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Android refuses to run non-PIE binaries, a restriction already
encoded in the cmd/go tool's buildModeInit function. This CL adds
the necessary flags to cmd/dist to make ./make.bash run on an
Android device.
Change-Id: I162084f573befaa41dcb47a2b78448bce5b83d35
Reviewed-on: https://go-review.googlesource.com/c/go/+/170943
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
If no other instruction mentions an inline mark, we can get rid of it.
This normally happens when the inlined function is empty, or when all
of its code is folded into other instructions.
Also use consistent statement-ness for inline mark positions, so that
more of them can be removed in favor of existing instructions.
Update #29571Fixes#31172
Change-Id: I71f84d355101f37a27960d9e8528f42f92767496
Reviewed-on: https://go-review.googlesource.com/c/go/+/170445
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Right now the mTreap structure exposes the treapNode structure through
only one interface: find. There's no reason (performance or otherwise)
for exposing this, and we get a cleaner abstraction through the
iterators this way. This change also makes it easier to make changes to
the mTreap implementation without violating its interface.
Change-Id: I5ef86b8ac81a47d05d8404df65af9ec5f419dc40
Reviewed-on: https://go-review.googlesource.com/c/go/+/164098
Reviewed-by: Austin Clements <austin@google.com>
This change just makes the code in scavengeLargest easier to reason
about by reducing the number of exit points to the method. It should
still be correct either way because the condition checked at the end
(released > nbytes) will always be false if we return, but this just
makes the code a little easier to maintain.
Change-Id: If60da7696aca3fab3b5ddfc795d600d87c988238
Reviewed-on: https://go-review.googlesource.com/c/go/+/160617
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
CL 56470 unindented bytes.Fields, but not strings.Fields. Do so now to
make it easier to diff the two functions for potential differences.
Change-Id: Ifef81f50cee64e8277e91efa5ec5521d8d21d3bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/170951
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Modified field allows representation of extended timestamps, which provide more accuracy than the legacy MS-DOS timestamps.
The FileInfo method provides an implementation of the os.FileInfo interface for files inside archives.
With this change, we make FileInfo use the Modified field, if present, to return more detailed timestamps from its ModTime method.
Fixes#28350
Change-Id: Ia31b5b871a3e61df38a3a1325787ae23ea0b8088
GitHub-Last-Rev: 13e94be3f8
GitHub-Pull-Request: golang/go#28352
Reviewed-on: https://go-review.googlesource.com/c/go/+/144382
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Fixes the TestSplice test on Android where the default
TMPDIR (/data/local/tmp) might not be available.
Change-Id: I4f104d11254ba855b1bd2dfa0547d69b7bce4878
Reviewed-on: https://go-review.googlesource.com/c/go/+/170947
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The underlying system call tested by TestCredentialNoSetGroups
is blocked on Android.
Discovered while running all.bash from an Android device; the syscall
is only blocked in an app context.
Change-Id: I16fd2e64636a0958b0ec86820723c0577b8f8f24
Reviewed-on: https://go-review.googlesource.com/c/go/+/170945
Run-TryBot: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's not supported in an app context:
$ go test -short os
--- FAIL: TestChdirAndGetwd (0.00s)
os_test.go:1213: Open /: open /: permission denied
Change-Id: I56b951f925a50fd67715ee2f1de64951ee867e91
Reviewed-on: https://go-review.googlesource.com/c/go/+/170946
Run-TryBot: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Without this change, building an Android toolchain fails:
$ CGO_ENABLED=1 GOARCH=arm64 GOOS=android ./bootstrap.bash
...
rmdir: failed to remove 'bin/go_android_arm64_exec': Not a directory
Change-Id: Ibc3b1e2fd24b73a63bd3020ce1e813f2b4496125
Reviewed-on: https://go-review.googlesource.com/c/go/+/170941
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
They were added a very long time ago, as a convenience before Go had
struct literals. Today, it is better to use the zero-valued literal. For
example, the compiler cannot prove that ZP or ZR have not been modified.
Change-Id: I7469f1c751e91bf76fe1eab07b5772eccb5d6405
Reviewed-on: https://go-review.googlesource.com/c/go/+/171097
Reviewed-by: Nigel Tao <nigeltao@golang.org>
