Before this change, in case of any failure, asmcheck was
dumping to stderr the whole output of compile -S, which
can be very long if it contains multiple functions.
Make it so it filters the output to only display the
assembly output of functions for which at least one opcode
check failed. This greatly simplifies debugging.
Change-Id: I1bbf54473b8252a3384e2c1dade82d926afc119d
Reviewed-on: https://go-review.googlesource.com/98444
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, the top-level testsuite always uses whatever version
of Go is found in the PATH to execute all the tests. This
forces the developers to tweak the PATH to run the testsuite.
Change it to use the same version of Go used to run run.go.
This allows developers to run the testsuite using the tip
compiler by simply saying "../bin/go run run.go".
I think this is a better solution compared to always forcing
"../bin/go", because it allows developers to run the testsuite
using different Go versions, for instance to check if a new
test is fixed in tip compared to the installed compiler.
Fixes#24217
Change-Id: I41b299c753b6e77c41e28be9091b2b630efea9d2
Reviewed-on: https://go-review.googlesource.com/98439
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In RET instruction, the operand is the return jump's target,
which should be put in Prog.To.
Add an action "buildrundir" to the test driver, which builds
(compile+assemble+link) the code in a directory and runs the
resulting binary.
Fixes#23838.
Change-Id: I7ebe7eda49024b40a69a24857322c5ca9c67babb
Reviewed-on: https://go-review.googlesource.com/94175
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This avoid simple bugs like "ADD" matching "FADD". Obviously
"ADD" will still match "ADDQ" so some care is still required
in this regard, but at least a first class of possible errors
is taken care of.
Change-Id: I7deb04c31de30bedac9c026d9889ace4a1d2adcb
Reviewed-on: https://go-review.googlesource.com/97817
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
asmcheck comments now support a compact form of specifying
multiple checks for each platform, using the following syntax:
amd64:"SHL\t[$]4","SHR\t[$]4"
Negative checks are also parsed using the following syntax:
amd64:-"ROR"
though they are still not working.
Moreover, out-of-line comments have been implemented. This
allows to specify asmchecks on comment-only lines, that will
be matched on the first subsequent non-comment non-empty line.
// amd64:"XOR"
// arm:"EOR"
x ^= 1
Change-Id: I110c7462fc6a5c70fd4af0d42f516016ae7f2760
Reviewed-on: https://go-review.googlesource.com/97816
Reviewed-by: Keith Randall <khr@golang.org>
The top-level test harness is modified to support a new kind
of test: "asmcheck". This is meant to replace asm_test.go
as an easier and more readable way to test code generation.
I've added a couple of codegen tests to get initial feedback
on the syntax. I've created them under a common "codegen"
subdirectory, so that it's easier to run them all with
"go run run.go -v codegen".
The asmcheck syntax allows to insert line comments that
can specify a regular expression to match in the assembly code,
for multiple architectures (the testsuite will automatically
build each testfile multiple times, one per mentioned architecture).
Negative matches are unsupported for now, so this cannot fully
replace asm_test yet.
Change-Id: Ifdbba389f01d55e63e73c99e5f5449e642101d55
Reviewed-on: https://go-review.googlesource.com/97355
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
For "type T = U" we were accidentally emitting a #define for "U__size"
instead of "T__size".
Fixes#22877.
Change-Id: I5ed6757d697753ed6d944077c16150759f6e1285
Reviewed-on: https://go-review.googlesource.com/80759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This cuts 6 seconds off all.bash with the new go command.
Not a ton, but also an easy 6 seconds to grab.
The -tags=use_go_run in the misc/cgo tests is just some
go command flag that will make run.go use go run,
but without making everything look stale.
(Those tests have relative imports,
so go tool compile+link is not enough.)
Change-Id: I43bf4bb661d3adde2b2d4aad5e8f64b97bc69ba9
Reviewed-on: https://go-review.googlesource.com/73994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If the go install doesn't use the same flags as the main build
it can overwrite the installed standard library, leading to
flakiness and slow future tests.
Force uses of 'go install' etc to propagate $GO_GCFLAGS
or disable them entirely, to avoid problems.
As I understand it, the main place this happens is the ssacheck builder.
If there are other uses that need to run some of the now-disabled
tests we can reenable fixed tests in followup CLs.
Change-Id: Ib860a253539f402f8a96a3c00ec34f0bbf137c9a
Reviewed-on: https://go-review.googlesource.com/74470
Reviewed-by: David Crawshaw <crawshaw@golang.org>
These are used by DIV[U] and MOD[U] assembly instructions.
Add a test in the stdlib so we actually exercise linking
to these routines.
Update #19507
Change-Id: I0d8e19a53e3744abc0c661ea95486f94ec67585e
Reviewed-on: https://go-review.googlesource.com/45703
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The code in #20162 contains an embedded interface.
It didn't get dowidth'd by the frontend,
and during DWARF generation, ngotype asked
for a string description of it,
which triggered a request for the number of fields
in the interface, which triggered a dowidth,
which is disallowed in the backend.
The other changes in this CL are to support the test.
Fixes#20162
Change-Id: I4d0be5bd949c361d4cdc89a8ed28b10977e40cf9
Reviewed-on: https://go-review.googlesource.com/42131
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, we could not run tests with -l=4 on NaCl since the buildrun
action is not supported on NaCl. This lets us run tests with build flags
on NaCl.
Change-Id: I103370c7b823b4ff46f47df97e802da0dc2bc7c3
Reviewed-on: https://go-review.googlesource.com/38170
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Compiler errors now show the exact line and line byte offset (sometimes
called "column") of where an error occured. For `go tool compile x.go`:
package p
const c int = false
//line foo.go:123
type t intg
reports
x.go:2:7: cannot convert false to type int
foo.go:123[x.go:4:8]: undefined: intg
(Some errors use the "wrong" position for the error message; arguably
the byte offset for the first error should be 15, the position of 'false',
rathen than 7, the position of 'c'. But that is an indepedent issue.)
The byte offset (column) values are measured in bytes; they start at 1,
matching the convention used by editors and IDEs.
Positions modified by //line directives show the line offset only for the
actual source location (in square brackets), not for the "virtual" file and
line number because that code is likely generated and the //line directive
only provides line information.
Because the new format might break existing tools or scripts, printing
of line offsets can be disabled with the new compiler flag -C. We plan
to remove this flag eventually.
Fixes#10324.
Change-Id: I493f5ee6e78457cf7b00025aba6b6e28e50bb740
Reviewed-on: https://go-review.googlesource.com/37970
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Loop breaking with a counter. Benchmarked (see comments),
eyeball checked for sanity on popular loops. This code
ought to handle loops in general, and properly inserts phi
functions in cases where the earlier version might not have.
Includes test, plus modifications to test/run.go to deal with
timeout and killing looping test. Tests broken by the addition
of extra code (branch frequency and live vars) for added
checks turn the check insertion off.
If GOEXPERIMENT=preemptibleloops, the compiler inserts reschedule
checks on every backedge of every reducible loop. Alternately,
specifying GO_GCFLAGS=-d=ssa/insert_resched_checks/on will
enable it for a single compilation, but because the core Go
libraries contain some loops that may run long, this is less
likely to have the desired effect.
This is intended as a tool to help in the study and diagnosis
of GC and other latency problems, now that goal STW GC latency
is on the order of 100 microseconds or less.
Updates #17831.
Updates #10958.
Change-Id: I6206c163a5b0248e3f21eb4fc65f73a179e1f639
Reviewed-on: https://go-review.googlesource.com/33910
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It appears to be a vestigial holding ground for bugs.
But we have an issue tracker, and #1909 is there and open.
Change-Id: I912ff222a24c51fab483be0c67dad534f5a84488
Reviewed-on: https://go-review.googlesource.com/31859
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If -s is specified, each file is considered a separate
package even if multiple files have the same package names.
For instance, the action and flag "errorcheckdir -s"
will compile all files in the respective directory as
individual packages.
Change-Id: Ic5c2f9e915a669433f66c2d3fe0ac068227a502f
Reviewed-on: https://go-review.googlesource.com/24313
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Pushed from an old client by mistake. These are the
missing changes.
Change-Id: Ia8d61c5c0bde907369366ea9ea98711823342803
Reviewed-on: https://go-review.googlesource.com/21349
Reviewed-by: Todd Neal <todd@tneal.org>
One intrinsic was needed to help get the very best
performance out of a future GC; as long as that one was
being added, I also added Bswap since that is sometimes
a handy thing to have. I had intended to fill out the
bit-scan intrinsic family, but the mismatch between the
"scan forward" instruction and "count leading zeroes"
was large enough to cause me to leave it out -- it poses
a dilemma that I'd rather dodge right now.
These intrinsics are not exposed for general use.
That's a separate issue requiring an API proposal change
( https://github.com/golang/proposal )
All intrinsics are tested, both that they are substituted
on the appropriate architecture, and that they produce the
expected result.
Change-Id: I5848037cfd97de4f75bdc33bdd89bba00af4a8ee
Reviewed-on: https://go-review.googlesource.com/20564
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This should probably be considered "experimental" at this stage, but
what it needs is feedback from adventurous adopters. I think the data
structure used for describing escape reasons might be extendable to
allow a cleanup of the underlying algorithms, which suffers from
insufficiently separated concerns (the graph does not deal well with
escape level adjustments, so it is augmented by a second custom-walk
portion of the "flood" phase. It would be better to put it all,
including level adjustments, in a single graph structure, and then
simply flood the graph.
Tweaked to avoid allocations in the no-logging case.
Modified run.go to ignore lines with leading "#" in the output (since
it can never match a line), and in -update_errors to ignore leading
tabs in output lines and to normalize embedded filenames.
Currently requires -m -m because otherwise the noise/update
burden for the other escape tests is considerable.
There is a partial test. Existing escape analysis tests seem to
cover all except the panic case and what looks like it might be
unreachable code in escape analysis.
Fixes#10526.
Change-Id: I2524fdec54facae48b00b2548e25d9e46fcaf832
Reviewed-on: https://go-review.googlesource.com/18041
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The build tags are necessary to keep "go build" in that directory
building only stdio.go, but we have to arrange for test/run.go to
treat them as satisfied.
Fixes#12625.
Change-Id: Iec0cb2fdc2c9b24a4e0530be25e940aa0cc9552e
Reviewed-on: https://go-review.googlesource.com/17454
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a bit ugly but it's a useful test. Run go install -buildmode=shared std
and then go run run.go -linkshared (it passes on linux/amd64).
Change-Id: I5684c79cd03817fa1fc399788b7320f8535c08da
Reviewed-on: https://go-review.googlesource.com/16343
Reviewed-by: Russ Cox <rsc@golang.org>
Some tests disabled, some bifurcated into _ssa and not,
with appropriate logging added to compiler.
"tests/live.go" in particular needs attention.
SSA-specific testing removed, since it's all SSA now.
Added "-run_skips" option to tests/run.go to simplify
checking whether a test still fails (or how it fails)
on a skipped platform.
The compiler now compiles with SSA by default.
If you don't want SSA, specify GOSSAHASH=n (or N) as
an environment variable. Function names ending in "_ssa"
are always SSA-compiled.
GOSSAFUNC=fname retains its "SSA for fname, log to ssa.html"
GOSSAPKG=pkg only has an effect when GOSSAHASH=n
GOSSAHASH=10101 etc retains its name-hash-matching behavior
for purposes of debugging.
See #13068
Change-Id: I8217bfeb34173533eaeb391b5f6935483c7d6b43
Reviewed-on: https://go-review.googlesource.com/16299
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Add line that was inadvertently removed.
Change-Id: I99ebc1041e984e408ae5825836c28b9891d6043b
Reviewed-on: https://go-review.googlesource.com/14470
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Keith Randall <khr@golang.org>
This matches existing behavior, see issue #2196
Change-Id: Ifa9359b7c821115389f337a57de355c5ec23be8f
Reviewed-on: https://go-review.googlesource.com/14261
Reviewed-by: Keith Randall <khr@golang.org>
Evaluating args can overwrite arg area, so we can't write argsize and func
until args are evaluated.
Fixes test/recover.go, test/recover1.go, and test/fixedbugs/issue4066.go
Change-Id: I862e4934ccdb8661431bcc3e1e93817ea834ea3f
Reviewed-on: https://go-review.googlesource.com/14405
Reviewed-by: David Chase <drchase@google.com>
Now that the standard library tests
are all passing, add the
test directory tests.
These contain a number of edge case tests
that are of particular interest for compilers.
Some kinds of tests are not well-suited
for a new backend, such as errorcheck tests.
To start, use SSA only for run and runoutput.
There are three failing tests now.
Just mark them as such for now,
so that we can prevent regressions.
This code will all be unwound once SSA
codegen matures and becomes the default.
Change-Id: Ic51e6d0cc1cd48ef1e2fe2c9a743bf0cce275200
Reviewed-on: https://go-review.googlesource.com/14344
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also modified test/run.go to ignore messages prefixed <autogenerated>
because those cannot be described with "// ERROR ...", and backed out
patch from issue #9537 because it is no longer necessary. The reasons
described in the 9537 discussion for why escape analysis cannot run
late no longer hold, happily.
Fixes#11053.
Change-Id: Icb14eccdf2e8cde3d0f8fb8a216b765400a96385
Reviewed-on: https://go-review.googlesource.com/11088
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Also modifies 'dist test' to use that sharding, and removes some old
temporary stuff from dist test which are no longer required.
'dist test' now also supports running a list of tests given in
arguments, mutually exclusive with the existing -run=REGEXP flag. The
hacky fast paths for avoiding the 1 second "go list" latency are now
removed and only apply to the case where partial tests are run via
args, instead of regex. The build coordinator will use both styles
for awhile. (the statically-sharded ARM builders on scaleway will
continue to use regexps, but the dynamically-shared builders on GCE
will use the list of tests)
Updates #10029
Change-Id: I557800a54dfa6f3b5100ef4c26fe397ba5189813
Reviewed-on: https://go-review.googlesource.com/10688
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL removes the remaining visible uses of the "architecture letter" concept.
(They are no longer in tool names nor in source directory names.)
Because the architecture letter concept is now gone, delete GOCHAR
from "go env" output, and change go/build.ArchChar to return an
error always.
The architecture letter is still used in the compiler and linker sources
as a clumsy architecture enumeration, but that use is not visible to
Go users and can be cleaned up separately.
Change-Id: I4d97a38f372003fb610c9c5241bea440d9dbeb8d
Reviewed-on: https://go-review.googlesource.com/10289
Reviewed-by: Rob Pike <r@golang.org>
This CL fixes the build to use the newly created go tool compile
and go tool link in place of go tool 5g, go tool 5l, and so on.
See golang-dev thread titled "go tool compile, etc" for background.
Although it was not a primary motivation, this conversion does
reduce the wall clock time and cpu time required for make.bash
by about 10%.
Change-Id: I79cbbdb676cab029db8aeefb99a53178ff55f98d
Reviewed-on: https://go-review.googlesource.com/10288
Reviewed-by: Rob Pike <r@golang.org>
Clean up after CL 5310.
Change-Id: Ib870e7b9d26eb118eefdaa3e76dcec4a4d459584
Reviewed-on: https://go-review.googlesource.com/9398
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These were fixed a little while ago, but overlooked when reenabling
disabled tests.
Update #9968.
Change-Id: I301ef587e580c517a170ad08ff897118b58cedec
Reviewed-on: https://go-review.googlesource.com/9347
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The flag updates error annotations in test files from actual compiler output.
This is useful when doing compiler changes that add/remove/change lots of errors,
or when adding lots of new tests.
Also I noticed at least 2 cases where annotation were sub-optimal:
1. The annotation was "leaking param p" when the actual error is
"leaking param p to result ~r1".
2. The annotation was "leaking param m" when the actual errors
are "leaking param m" and "leaking param mv1".
For now it works only for errorcheck mode.
Also, apply the update to escape and liveness tests.
Some files have gccgo-specific errors of the form "gc error|gccgo error",
so it is risky to run update on all files. Gccgo-specific error
does not necessary contain '|', it can be just truncated.
Change-Id: Iaaae767f859dcb8321a8cb4970b2b70969e8a345
Reviewed-on: https://go-review.googlesource.com/5310
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These don't work with the new compiler, because the
new compiler doesn't have the custom syntax errors
that I built for the old compiler. It will, just not yet.
(Issue #9968.)
Change-Id: I658f7dab2c7f855340a501f9ae4479c097b28cd3
Reviewed-on: https://go-review.googlesource.com/5632
Reviewed-by: Rob Pike <r@golang.org>
The main issue is that the misc/cgo/{stdio,life} tests are silently
getting skipped when invoked from run.bash.
run.go should ignore any build tags after the first blank line in
source file. It already checks for test actions only upto the first
blank line. Build tags must be specified in the same block.
See http://golang.org/cl/3675 for background.
Change-Id: Id8abf000119e3335f7250d8ef34aac7811fc9dff
Reviewed-on: https://go-review.googlesource.com/3812
Reviewed-by: Minux Ma <minux@golang.org>
* bug248, bug345, bug369, and bug429 were ported from bash commands to run scripts. bug369 remains disabled.
* bug395 is a test for issue 1909, which is still open. It is marked as skip now and will be usable with compile with run.go when issue 1909 is fixed.
Fixes#4139
Updates #1909
Change-Id: Ibb5fbfb5cf72ddc285829245318eeacd3fb5a636
Reviewed-on: https://go-review.googlesource.com/1774
Reviewed-by: Russ Cox <rsc@golang.org>
The remaining run-only tests will be migrated to run.go in another CL.
This CL will break the build due to issues 8746 and 8806.
Update #4139
Update #8746
Update #8806
LGTM=rsc
R=rsc, bradfitz, iant
CC=golang-codereviews
https://golang.org/cl/144630044
Following CL 68150047, the goos and goarch
variables are not currently set when the GOOS
and GOARCH environment variables are not set.
This made the content of the build tag to be
ignored in this case.
This CL sets goos and goarch to runtime.GOOS
and runtime.GOARCH when the GOOS and GOARCH
environments variables are not set.
LGTM=aram, bradfitz
R=golang-codereviews, aram, gobot, rsc, dave, bradfitz
CC=golang-codereviews, rsc
https://golang.org/cl/112490043
