Don't fold constant factors into a multiply
beyond the capacity of a MULQ instruction (32 bits).
Fixes#16733
Change-Id: Idc213c6cb06f7c94008a8cf9e60a9e77d085fd89
Reviewed-on: https://go-review.googlesource.com/27160
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add more ARM64 optimizations:
- use hardware zero register when it is possible.
- use shifted ops.
The assembler supports shifted ops but not documented, nor knows
how to print it. This CL adds them.
- enable fast division.
This was disabled because it makes the old backend generate slower
code. But with SSA it generates faster code.
Turn on SSA by default, also adjust tests.
Change-Id: I7794479954c83bb65008dcb457bc1e21d7496da6
Reviewed-on: https://go-review.googlesource.com/26950
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Last part of the 386 SSA port.
Modify the x86 backend to simulate SSE registers and
instructions with 387 registers and instructions.
The simulation isn't terribly performant, but it works,
and the old implementation wasn't very performant either.
Leaving to people who care about 387 to optimize if they want.
Turn on SSA backend for 386 by default.
Fixes#16358
Change-Id: I678fb59132620b2c47e993c1c10c4c21135f70c0
Reviewed-on: https://go-review.googlesource.com/25271
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It's not a new backend, just a PtrSize==4 modification
of the existing AMD64 backend.
Change-Id: Icc63521a5cf4ebb379f7430ef3f070894c09afda
Reviewed-on: https://go-review.googlesource.com/25586
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
SSA compiler on AMD64 may spill Duff-adjusted address as scalar. If
the object is on stack and the stack moves, the spilled address become
invalid.
Making the spill pointer-typed does not work. The Duff-adjusted address
points to the memory before the area to be zeroed and may be invalid.
This may cause stack scanning code panic.
Fix it by doing Duff-adjustment in genValue, so the intermediate value
is not seen by the reg allocator, and will not be spilled.
Add a test to cover both cases. As it depends on allocation, it may
be not always triggered.
Fixes#16515.
Change-Id: Ia81d60204782de7405b7046165ad063384ede0db
Reviewed-on: https://go-review.googlesource.com/25309
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
NaCl code runs in sandbox and there are restrictions for its
instruction uses
(https://developer.chrome.com/native-client/reference/sandbox_internals/arm-32-bit-sandbox).
Like the legacy backend, on NaCl,
- don't use R9, which is used as NaCl's "thread pointer".
- don't use Duff's device.
- don't use indexed load/stores.
- the assembler rewrites DIV/MOD to runtime calls, which on NaCl
clobbers R12, so R12 is marked as clobbered for DIV/MOD.
- other restrictions are satisfied by the assembler.
Enable SSA specific tests on nacl/arm, and disable non-SSA ones.
Updates #15365.
Change-Id: I9262693ec6756b89ca29d3ae4e52a96fe5403b02
Reviewed-on: https://go-review.googlesource.com/24859
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This new comment can be used to declare that the uintptr arguments to a
function may be converted from pointers, and that those pointers should
be considered to escape. This is used for the Call methods in
dll_windows.go that take uintptr arguments, because they call Syscall.
We can't treat these functions as we do syscall.Syscall, because unlike
Syscall they may cause the stack to grow. For Syscall we can assume that
stack arguments can remain on the stack, but for these functions we need
them to escape.
Fixes#16035.
Change-Id: Ia0e5b4068c04f8d303d95ab9ea394939f1f57454
Reviewed-on: https://go-review.googlesource.com/24551
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As Josh mentioned in CL 24716, there has been requests for using SSA
for ARM. SSA can still be disabled by setting -ssa=0 for cmd/compile,
or partially enabled with GOSSAFUNC, GOSSAPKG, and GOSSAHASH.
Not enable SSA by default on NaCl, which is not supported yet.
Enable SSA-specific tests on ARM: live_ssa.go and nilptr3_ssa.go;
disable non-SSA tests: live.go, nilptr3.go, and slicepot.go.
Updates #15365.
Change-Id: Ic2ca8d166aeca8517b9d262a55e92f2130683a16
Reviewed-on: https://go-review.googlesource.com/23953
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
If we don't mark them as needzero, we have a live pointer variable
containing possible garbage, which will baffle the GC.
Fixes#16249.
Change-Id: I7c423ceaca199ddd46fc2c23e5965e7973f07584
Reviewed-on: https://go-review.googlesource.com/24715
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Prior to this change package "foo" had to be installed in order to check
example names in "foo_test" package.
However by the time "foo_test" package is checked a parsed "foo" package
has been already constructed. Use it to check example names.
Also change TestDivergentPackagesExamples test to pass directory of the
package to the vet tool as it is the most common way to invoke it. This
requires changes to errchk to add support for grabbing source files from
a directory.
Fixes#16189
Change-Id: Ief103d07b024822282b86c24250835cc591793e8
Reviewed-on: https://go-review.googlesource.com/24488
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The compiler was treating all global function literals as occurring in a
function named "glob", which caused a symbol name collision when there
was an actual function named "glob". Fixed by adding a period.
Fixes#16193.
Change-Id: I67792901a8ca04635ba41d172bfaee99944f594d
Reviewed-on: https://go-review.googlesource.com/24500
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Make sure the pointer to the heap copy of an output parameter is kept
live throughout the function. The function could panic at any point,
and then a defer could recover. Thus, we need the pointer to the heap
copy always available so the post-deferreturn code can copy the return
value back to the stack.
Before this CL, the pointer to the heap copy could be considered dead in
certain situations, like code which is reverse dominated by a panic call.
Fixes#16095.
Change-Id: Ic3800423e563670e5b567b473bf4c84cddb49a4c
Reviewed-on: https://go-review.googlesource.com/24213
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is a regression from 1.6. The respective code in importimport
(export.go) was not exactly replicated with the new importer. Also
copied over the missing cyclic import check.
Added test cases.
Fixes#16133.
Change-Id: I1e0a39ff1275ca62a8054874294d400ed83fb26a
Reviewed-on: https://go-review.googlesource.com/24312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
If -s is specified, each file is considered a separate
package even if multiple files have the same package names.
For instance, the action and flag "errorcheckdir -s"
will compile all files in the respective directory as
individual packages.
Change-Id: Ic5c2f9e915a669433f66c2d3fe0ac068227a502f
Reviewed-on: https://go-review.googlesource.com/24313
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A straight conversion from a type T to an interface type I, where T does
not implement I, should always panic with an interface conversion error
that shows the missing method. This was not happening if the conversion
was done once using the comma-ok form (the result would not be OK) and
then again in a straight conversion. Due to an error in the runtime
package the second conversion was failing with a nil pointer
dereference.
Fixes#16130.
Change-Id: I8b9fca0f1bb635a6181b8b76de8c2385bb7ac2d2
Reviewed-on: https://go-review.googlesource.com/24284
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This adds 8 bytes of binary size to every type that has methods. It is
the smallest change I could come up with for 1.7.
Fixes#16037
Change-Id: Ibe15c3165854a21768596967757864b880dbfeed
Reviewed-on: https://go-review.googlesource.com/24070
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Special case for rewriting OAS inits omitted OASWB, added
that and OAS2FUNC. The special case cannot be default case,
that causes racewalk to fail in horrible ways.
Fixes#16008.
Change-Id: Ie0d2f5735fe9d8255a109597b36d196d4f86703a
Reviewed-on: https://go-review.googlesource.com/23954
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The generated code for interface stubs sometimes just messes
with a few of the args and then tail-calls to the target routine.
The args that aren't explicitly modified appear to not be used.
But they are used, by the thing we're tail calling.
Fixes#16016
Change-Id: Ib9b3a8311bb714a201daee002885fcb59e0463fa
Reviewed-on: https://go-review.googlesource.com/23960
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This matches the behavior of the legacy backend.
Fixes#15975 (if this is the intended behavior)
Change-Id: Id277959069b8b8bf9958fa8f2cbc762c752a1a19
Reviewed-on: https://go-review.googlesource.com/23820
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Post-liveness fix, the slices on both sides can now be
indirects of & variables. The cgen code handles those
cases just fine.
Fixes#15988
Change-Id: I378ad1d5121587e6107a9879c167291a70bbb9e4
Reviewed-on: https://go-review.googlesource.com/23863
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Make sure auto names don't conflict with function names. Before this CL,
we confused name a.len (the len field of the slice a) with a.len (the function
len declared on a).
Fixes#15961
Change-Id: I14913de697b521fb35db9a1b10ba201f25d552bb
Reviewed-on: https://go-review.googlesource.com/23789
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adding a .def suffix for DWARF info collided with the DWARF info,
without the suffix, for a method named def. Change the suffix to ..def
instead.
Fixes#15926.
Change-Id: If1bf1bcb5dff1d7f7b79f78e3f7a3bbfcd2201bb
Reviewed-on: https://go-review.googlesource.com/23733
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
If memory might be unaligned, zero it one byte at a time
instead of 4 bytes at a time.
Fixes#15902
Change-Id: I4eff0840e042e2f137c1a4028f08793eb7dfd703
Reviewed-on: https://go-review.googlesource.com/23587
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Some of these errors are reported in the wrong places.
That’s issue #15911 and #15912.
Change-Id: Ia09d7f89be4d15f05217a542a61b6ac08090dd87
Reviewed-on: https://go-review.googlesource.com/23588
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The liveness computation of parameters generally was never
correct, but forcing all parameters to be live throughout the
function covered up that problem. The new SSA back end is
too clever: even though it currently keeps the parameter values live
throughout the function, it may find optimizations that mean
the current values are not written back to the original parameter
stack slots immediately or ever (for example if a parameter is set
to nil, SSA constant propagation may replace all later uses of the
parameter with a constant nil, eliminating the need to write the nil
value back to the stack slot), so the liveness code must now
track the actual operations on the stack slots, exposing these
problems.
One small problem in the handling of arguments is that nodarg
can return ONAME PPARAM nodes with adjusted offsets, so that
there are actually multiple *Node pointers for the same parameter
in the instruction stream. This might be possible to correct, but
not in this CL. For now, we fix this by using n.Orig instead of n
when considering PPARAM and PPARAMOUT nodes.
The major problem in the handling of arguments is general
confusion in the liveness code about the meaning of PPARAM|PHEAP
and PPARAMOUT|PHEAP nodes, especially as contrasted with PAUTO|PHEAP.
The difference between these two is that when a local variable "moves"
to the heap, it's really just allocated there to start with; in contrast,
when an argument moves to the heap, the actual data has to be copied
there from the stack at the beginning of the function, and when a
result "moves" to the heap the value in the heap has to be copied
back to the stack when the function returns
This general confusion is also present in the SSA back end.
The PHEAP bit worked decently when I first introduced it 7 years ago (!)
in 391425ae. The back end did nothing sophisticated, and in particular
there was no analysis at all: no escape analysis, no liveness analysis,
and certainly no SSA back end. But the complications caused in the
various downstream consumers suggest that this should be a detail
kept mainly in the front end.
This CL therefore eliminates both the PHEAP bit and even the idea of
"heap variables" from the back ends.
First, it replaces the PPARAM|PHEAP, PPARAMOUT|PHEAP, and PAUTO|PHEAP
variable classes with the single PAUTOHEAP, a pseudo-class indicating
a variable maintained on the heap and available by indirecting a
local variable kept on the stack (a plain PAUTO).
Second, walkexpr replaces all references to PAUTOHEAP variables
with indirections of the corresponding PAUTO variable.
The back ends and the liveness code now just see plain indirected
variables. This may actually produce better code, but the real goal
here is to eliminate these little-used and somewhat suspect code
paths in the back end analyses.
The OPARAM node type goes away too.
A followup CL will do the same to PPARAMREF. I'm not sure that
the back ends (SSA in particular) are handling those right either,
and with the framework established in this CL that change is trivial
and the result clearly more correct.
Fixes#15747.
Change-Id: I2770b1ce3cbc93981bfc7166be66a9da12013d74
Reviewed-on: https://go-review.googlesource.com/23393
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The importer had several bugs with respect to labels and gotos:
- it didn't create a new ONAME node for label names (label dcl,
goto, continue, and break)
- it overwrote the symbol for gotos with the dclstack
- it didn't set the dclstack for labels
In the process changed export format slightly to always assume
a label name for labels and gotos, and never assume a label for
fallthroughs.
For fallthroughs and switch cases, now also set Xoffset like in
the parser. (Not setting it, i.e., using 0 was ok since this is
only used for verifying correct use of fallthroughs, which was
checked already. But it's an extra level of verification of the
import.)
Fixes#15838.
Change-Id: I3637f6314b8651c918df0c8cd70cd858c92bd483
Reviewed-on: https://go-review.googlesource.com/23445
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 21462 and CL 21463 made this message say explicitly that the problem
was a struct field in a map, but the word "directly" is unnecessary,
sounds wrong, and makes the error long.
Change-Id: I2fb68cdaeb8bd94776b8022cf3eae751919ccf6f
Reviewed-on: https://go-review.googlesource.com/23373
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Non-syntax errors are always counted to determine if to exit
early, but then deduplication eliminates them. This can lead
to situations which report "too many errors" and only one
error is shown.
De-duplicate non-syntax errors early, at least the ones that
appear consecutively, and only count the ones actually being
shown. This doesn't work perfectly as they may not appear in
sequence, but it's cheap and good enough.
Fixes#14136.
Change-Id: I7b11ebb2e1e082f0d604b88e544fe5ba967af1d7
Reviewed-on: https://go-review.googlesource.com/23259
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
They get rewritten to NEWs, and they must be marked as escaping
so walk doesn't try to allocate them back onto the stack.
Fixes#15733
Change-Id: I433033e737c3de51a9e83a5a273168dbc9110b74
Reviewed-on: https://go-review.googlesource.com/23223
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run live vars test only on ssa builds.
We can't just drop KeepAlive ops during regalloc. We need
to replace them with copies.
Change-Id: Ib4b3b1381415db88fdc2165fc0a9541b73ad9759
Reviewed-on: https://go-review.googlesource.com/23225
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Introduce a KeepAlive op which makes sure that its argument is kept
live until the KeepAlive. Use KeepAlive to mark pointer input
arguments as live after each function call and at each return.
We do this change only for pointer arguments. Those are the
critical ones to handle because they might have finalizers.
Doing compound arguments (slices, structs, ...) is more complicated
because we would need to track field liveness individually (we do
that for auto variables now, but inputs requires extra trickery).
Turn off the automatic marking of args as live. That way, when args
are explicitly nulled, plive will know that the original argument is
dead.
The KeepAlive op will be the eventual implementation of
runtime.KeepAlive.
Fixes#15277
Change-Id: I5f223e65d99c9f8342c03fbb1512c4d363e903e5
Reviewed-on: https://go-review.googlesource.com/22365
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Previously statements like
f(unsafe.Pointer(g()), int(h()))
would be reordered into a sequence of statements like
autotmp_g := g()
autotmp_h := h()
f(unsafe.Pointer(autotmp_g), int(autotmp_h))
which can leave g's temporary value on the stack as a uintptr, rather
than an unsafe.Pointer. Instead, recognize uintptr-to-unsafe.Pointer
conversions when reordering function calls to instead produce:
autotmp_g := unsafe.Pointer(g())
autotmp_h := h()
f(autotmp_g, int(autotmp_h))
Fixes#15329.
Change-Id: I2cdbd89d233d0d5c94791513a9fd5fd958d11ed5
Reviewed-on: https://go-review.googlesource.com/22273
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
See #15604. This was a bug in a CL that has since been
rolled back. Adding a test to challenge the next attempter.
Change-Id: Ic43be254ea6eaab0071018cdc61d9b1c21f19cbf
Reviewed-on: https://go-review.googlesource.com/23000
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In regalloc, a sparse map is preallocated for later use by
spill-in-loop sinking. However, variables (spills) are added
during register allocation before spill sinking, and a map
query involving any of these new variables will index out of
bounds in the map.
To fix:
1) fix the queries to use s.orig[v.ID].ID instead, to ensure
proper indexing. Note that s.orig will be nil for values
that are not eligible for spilling (like memory and flags).
2) add a test.
Fixes#15585.
Change-Id: I8f2caa93b132a0f2a9161d2178320d5550583075
Reviewed-on: https://go-review.googlesource.com/22911
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This flag is experimental and the semantics may change
even after Go 1.7 is released. There are no changes to code
not using the flag.
The first part is for reading by future compiles.
The second part is for reading by the final link step.
Splitting the file this way allows distributed build systems
to ship the compile-input part only to compile steps and
the linker-input part only to linker steps.
The first part is basically just the export data,
and the second part is basically everything else.
The overall files still have the same broad structure,
so that existing tools will work with both halves.
It's just that various pieces are empty in the two halves.
This also copies the two bits of data the linker needed from
export data into the object header proper, so that the linker
doesn't need any export data at all. That eliminates a TODO
that was left for switching to the binary export data.
(Now the linker doesn't need to know about the switch.)
The default is still to write out a combined output file.
Nothing changes unless you pass -linkobj to the compiler.
There is no support in the go command for -linkobj,
since the go command doesn't copy objects around.
The expectation is that other build systems (like bazel, say)
might take advantage of this.
The header adjustment and the option for the split output
was intended as part of the zip archives, but the zip archives
have been cut from Go 1.7. Doing this to the current archives
both unblocks one step in the switch to binary export data
and enables alternate build systems to experiment with the
new flag using the Go 1.7 release.
Change-Id: I8b6eab25b8a22b0a266ba0ac6d31e594f3d117f3
Reviewed-on: https://go-review.googlesource.com/22500
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The problem was fixed by the rollback in CL 22930.
This CL just adds a test to prevent regressions.
Fixes#15602
Change-Id: I37453f6e18ca43081266fe7f154c6d63fbaffd9b
Reviewed-on: https://go-review.googlesource.com/22931
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The new export format keeps track of all types that are exported.
If a type is seen that was exported before, only a reference to
that type is emitted. The importer maintains a list of all the
seen types and uses that list to resolve type references.
The existing compiler infrastructure's invariants assumes that
only named types are referred to before they are fully set up.
Referring to unnamed incomplete types causes problems. One of
the issues was #15548.
Added a new internal flag 'trackAllTypes' to enable/disable
this type tracking. With this change only named types are
tracked.
Verified that this fix also addresses #15548, even w/o the
prior fix for that issue (in fact that prior fix is turned
off if trackAllTypes is disabled because it's not needed).
The test for #15548 covers also this change.
For #15548.
Change-Id: Id0b3ff983629703d025a442823f99649fd728a56
Reviewed-on: https://go-review.googlesource.com/22839
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The boolean destination in an OAS2DOTTYPE expression craps out during
compilation when trying to assign to a map entry because, unlike slice entries,
map entries are not directly addressable in memory. The solution is to
properly order the boolean destination node so that map entries are set
via autotmp variables.
Fixes#14678
Change-Id: If344e8f232b5bdac1b53c0f0d21eeb43ab17d3de
Reviewed-on: https://go-review.googlesource.com/22833
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Accidentally checked in the version of file c.go that doesn't
exhibit the bug - hence the test was not testing the bug fix.
Double-checked that this version exposes the bug w/o the fix.
Change-Id: Ie4dc455229d1ac802a80164b5d549c2ad4d971f5
Reviewed-on: https://go-review.googlesource.com/22837
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
