This reverts CL 214437.
Does not fix the issue, and the test was wrong so it did not detect that it did not fix the issue.
Updates #36375
Change-Id: I6a4112035a1e90f4fdafed6fdf4ec9dfc718b571
Reviewed-on: https://go-review.googlesource.com/c/go/+/214601
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Since Durations only span 290 years, they are not good for
manipulating very remote times. I bounced off this problem recently
while doing some astronomical calculations and it took me a while to
realize I could get a 64-bit seconds value from time.Time.Unix and
subtract two of them to evaluate the interval.
I thought it worth adding a sentence to make this clear. It didn't
occur to me for quite a while that "Unix time" spans a huge range in
the Go library.
Change-Id: I76c75dc951dfd6bcf86e8b0be3cfec518a3ecdee
Reviewed-on: https://go-review.googlesource.com/c/go/+/213977
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Fixes#36375
Change-Id: I407a1db23868880b83e73bc136d274659483fb69
Reviewed-on: https://go-review.googlesource.com/c/go/+/214437
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change the type printer to take a map of types that we're currently
printing. When we happen upon a type that we're already in the middle
of printing, print a reference to it instead.
A reference to another type is built using the offset of the first
byte of that type's string representation in the result. To facilitate
that computation (and it's probably more efficient, regardless), we
print the type to a buffer as we go, and build the string at the end.
It would be nice to use string.Builder instead of bytes.Buffer, but
string.Builder wasn't around in Go 1.4, and we'd like to bootstrap
from that version.
Fixes#29312
Change-Id: I49d788c1fa20f770df7b2bae3b9979d990d54803
Reviewed-on: https://go-review.googlesource.com/c/go/+/214239
Reviewed-by: Robert Griesemer <gri@golang.org>
The comment contained a link that had a file name and ID that no longer existed, so change to the URL of the corresponding part of the latest page.
Change-Id: I74e0885aabf470facc39b84035f7a83fef9c6a8e
GitHub-Last-Rev: 5681c84d9f
GitHub-Pull-Request: golang/go#36514
Reviewed-on: https://go-review.googlesource.com/c/go/+/214181
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Whenever more than 1/4 of the timers on a P's heap are deleted,
remove them from the heap.
Change-Id: Iff63ed3d04e6f33ffc5c834f77f645c52c007e52
Reviewed-on: https://go-review.googlesource.com/c/go/+/214299
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
We had a few test cases to make sure checkptr didn't have certain
false positives, but none to test for any true positives. This CL
fixes that.
Updates #22218.
Change-Id: I24c02e469a4af43b1748829a9df325ce510f7cc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/214238
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Make file names consistent, using only forward slashes in the path.
Fixes#36495
Change-Id: I337119d6dff233ab9d4bfe757147ec25961ae021
Reviewed-on: https://go-review.googlesource.com/c/go/+/214286
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This pulls in two new commits: a fix for a test broken on plan9 and a
correction to a comment.
Change-Id: I31cf046a5073872714c758894732b2fcc800ab6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/214289
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When adjustTimers sees a timerModifiedEarlier or timerModifiedLater,
it removes it from the heap, leaving a new timer at that position
in the heap. We were accidentally skipping that new timer in our loop.
In some unlikely cases this could cause adjustTimers to look at more
timers than necessary.
Change-Id: Ic71e54c175ab7d86a7fa46f1497aca71ed1c43cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/214338
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Go 1.14 will drop support for macOS 10.10, see #23011
This reverts CL 125304
Updates #26475
Updates #26513
Change-Id: Ia13eef30f22d67103f7ae45424124fbb116e1261
Reviewed-on: https://go-review.googlesource.com/c/go/+/214057
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Go 1.14 will be the last to support macOS 10.11.
Go 1.15 will require macOS 10.12 (Sierra).
Updates #23011
Change-Id: I8fff555e5b8fffe088e7e960e77fac9558cb74e4
Reviewed-on: https://go-review.googlesource.com/c/go/+/210137
Reviewed-by: Andrew Bonventre <andybons@golang.org>
In "Module support" section, there were two mentions of "Go 1.13",
assuming that's the latest version. Rather than update these to 1.14,
this CL changes those to "The go command".
Also, a minor change in wording for finding go.mod files.
Change-Id: Id194be9405b540f221464814e71c361a22cc0f55
Reviewed-on: https://go-review.googlesource.com/c/go/+/214140
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Hopefully we'll have the remaining safety violations in the standard
library ironed out by 1.15.
We also fix a minor (but important) typo while we're here.
Updates #34964, #34972.
Change-Id: Ic72fd4d9411b749f8c0cea87e95ab68347009893
Reviewed-on: https://go-review.googlesource.com/c/go/+/214118
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This update was automatically generated using the updatecontrib command:
cd gotip
go run golang.org/x/build/cmd/updatecontrib
With minor manual changes based on publicly available information
to canonicalize letter case and formatting for a few names.
Actions taken (relative to CONTRIBUTORS at origin/master):
Added Aaron Beitch <aaronb@arista.com>
Added Adam Shelton <aashelt90@gmail.com>
Added Aditya Harindar <aditya.harindar@gmail.com>
Added Alec Benzer <alec.benzer@gmail.com>
Added Alex Buchanan <buchanae@gmail.com>
Added Alex Gaynor <alex@alloy.us>
Added Alex Harford <alex.harford@saucelabs.com>
Added Alex Zhirov <azhirov@google.com>
Added Alexandr Mayorskiy <a.mayorskiy@corp.mail.ru>
Added An Xiao <hac@zju.edu.cn>
Added Andrei Enshin <b1os@bk.ru>
Added Andrew Medvedev <andrew.y.medvedev@gmail.com>
Added Andrew Stormont <astormont@racktopsystems.com>
Added Antonio Huete Jimenez <tuxillo@quantumachine.net>
Added Arda Güçlü <ardaguclu@gmail.com>
Added Artem Alekseev <artem.alekseev@intel.com>
Added Ayan George <ayan@ayan.net>
Added Barnaby Keene <accounts@southcla.ws>
Added Ben Toews <mastahyeti@gmail.com>
Added Benjamin Wuethrich <benjamin.wuethrich@gmail.com>
Added Brandon Philips <brandon@ifup.org>
Added Carlos Amedee <carlos@golang.org>
Added Changkun Ou <hi@changkun.us>
Added Chauncy Cullitan <chauncyc@google.com>
Added Clint J. Edwards <clint.j.edwards@gmail.com>
Added Daisuke Suzuki <daisuzu@gmail.com>
Added Dan Scales <danscales@google.com>
Added David Bond <davidsbond93@gmail.com>
Added Denis Isaev <idenx@yandex.com>
Added Domas Tamašauskas <puerdomus@gmail.com>
Added Duco van Amstel <duco.vanamstel@gmail.com>
Added Eduardo Villaseñor <evillasrmx@gmail.com>
Added Eric Biggers <ebiggers@google.com>
Added Eric Brown <browne@vmware.com>
Added Eric Rutherford <erutherford@gmail.com>
Added Gabriel Rosenhouse <rosenhouse@gmail.com>
Added George Hartzell <hartzell@alerce.com>
Added Gert Cuykens <gert.cuykens@gmail.com>
Added Ghazni Nattarshah <ghazni.nattarshah@gmail.com>
Added GitHub User DQNEO (188741) <dqneoo@gmail.com>
Added GitHub User Matts966 (28551465) <Matts966@users.noreply.github.com>
Added GitHub User ajz01 (4744634) <ajzdenek@gmail.com>
Added GitHub User andig (184815) <cpuidle@gmx.de>
Added GitHub User jinmiaoluo (39730824) <jinmiaoluo@icloud.com>
Added GitHub User maltalex (10195391) <code@bit48.net>
Added GitHub User po3rin (29445112) <abctail30@gmail.com>
Added GitHub User pokutuna (57545) <popopopopokutuna@gmail.com>
Added GitHub User ramenjuniti (32011829) <ramenjuniti@gmail.com>
Added GitHub User skanehira (7888591) <sho19921005@gmail.com>
Added GitHub User witchard (4994659) <witchard@hotmail.co.uk>
Added GitHub User zikaeroh (48577114) <zikaeroh@gmail.com>
Added Günther Noack <gnoack@google.com>
Added Hasit Bhatt <hasit.p.bhatt@gmail.com>
Added Howard Zhang <howard.zhang@arm.com>
Added Huan Du <i@huandu.me>
Added Ignacio Hagopian <jsign.uy@gmail.com>
Added Ilya Sinelnikov <sidhmangh@gmail.com>
Added Irbe Krumina <irbekrm@gmail.com>
Added Isfan Azhabil <isfan.azhabil@tokopedia.com>
Added Ivan Trubach <mr.trubach@icloud.com>
Added Jaap Aarts <jaap.aarts1@gmail.com>
Added Jeremy Faller <jeremy@golang.org>
Added Johan Jansson <johan.jansson@iki.fi>
Added John Papandriopoulos <jpap.code@gmail.com>
Added Jorge L. Fatta <jorge.fatta@auth0.com>
Added Josa Gesell <josa@gesell.me>
Added Julian Tibble <julian.tibble@gmail.com>
Added Jun Zhang <jim.zoumo@gmail.com>
Added Jędrzej Szczepaniak <jbszczepaniak@gmail.com>
Added Kalman Bekesi <kalmanb@google.com>
Added Katharine Berry <ktbry@google.com>
Added Keisuke Kishimoto <keisuke.kishimoto@gmail.com>
Added Kevan Swanberg <kevswanberg@gmail.com>
Added Koki Tomoshige <tomocy.dev@gmail.com>
Added Liz Rice <liz@lizrice.com>
Added Lorenz Brun <lorenz@brun.one>
Added Luke Young <bored-engineer@users.noreply.github.com>
Added Marc Sanmiquel <marcsanmiquel@gmail.com>
Added Marko Kungla <marko.kungla@gmail.com>
Added Mikhail Fesenko <proggga@gmail.com>
Added Mohit Verma <vmohit.93@gmail.com>
Added Moritz Fain <moritz@fain.io>
Added Nathan Dias <nathan.dias@orijtech.com>
Added Nikita Vanyasin <nikita.vanyasin@gmail.com>
Added Nuno Cruces <ncruces@users.noreply.github.com>
Added Oliver Powell <oliverpowell84@gmail.com>
Added Panos Georgiadis <pgeorgiadis@suse.de>
Added Pantelis Sampaziotis <psampaz@gmail.com>
Added Paulo Gomes <paulo.gomes.uk@gmail.com>
Added Prashant Agrawal <prashant.a.vjti@gmail.com>
Added Ricardo Seriani <ricardo.seriani@gmail.com>
Added Rob Findley <rfindley@google.com>
Added Robin Zhong <robin@robinzhong.co>
Added Rohan Challa <rohan@golang.org>
Added Roman Kollár <roman.kollar.0@gmail.com>
Added Ruixin Bao <ruixin.bao@ibm.com>
Added Sardorbek Pulatov <sardorbek.pulatov@outlook.com>
Added Scott Ragan <ragansa@fb.com>
Added Sean Liao <seankhliao@gmail.com>
Added Sebastian Chlopecki <sebsebmc@gmail.com>
Added Sebastian Kinne <skinne@google.com>
Added Sergei Lemeshkin <sergeilem@gmail.com>
Added Serhat Giydiren <serhatgiydiren@gmail.com>
Added Shivashis Padhi <shivashispadhi@gmail.com>
Added Simarpreet Singh <simar@linux.com>
Added Simon Ferquel <simon.ferquel@docker.com>
Added Simon Rozman <simon@rozman.si>
Added Sjoerd Siebinga <sjoerd.siebinga@gmail.com>
Added Spencer Kocot <spencerkocot@gmail.com>
Added Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Added Sven Taute <sven.taute@gmail.com>
Added Tao Qingyun <qingyunha@gmail.com>
Added Tianji Wu <the729@gmail.com>
Added Tomas Dabasinskas <tomas@dabasinskas.net>
Added Ville Skyttä <ville.skytta@iki.fi>
Added Vitaly Zdanevich <zdanevich.vitaly@ya.ru>
Added Vladimir Evgrafov <evgrafov.vladimir@gmail.com>
Added Vojtech Bocek <vbocek@gmail.com>
Added Wang Xuerui <git@xen0n.name>
Added William Poussier <william.poussier@gmail.com>
Added Xiangdong Ji <xiangdong.ji@arm.com>
Added Yuichi Nishiwaki <yuichi.nishiwaki@gmail.com>
Added Ziheng Liu <lzhfromustc@gmail.com>
Used GitHub User DQNEO (188741) form for DQNEO <dqneoo@gmail.com> https://github.com/golang/go/commit/f07059d949 [go]
Used GitHub User Matts966 (28551465) form for Matts966 <Matts966@users.noreply.github.com> https://github.com/golang/tools/commit/d89860af [tools]
Used GitHub User ajz01 (4744634) form for ajz01 <ajzdenek@gmail.com> https://github.com/golang/go/commit/57ad6ef15d [go]
Used GitHub User andig (184815) form for andig <cpuidle@gmx.de> https://github.com/golang/go/commit/cf630586ca [go sys]
Used GitHub User jinmiaoluo (39730824) form for jinmiaoluo <jinmiaoluo@icloud.com> https://github.com/golang/go/commit/c7e73ef60a [go]
Used GitHub User maltalex (10195391) form for maltalex <code@bit48.net> https://github.com/golang/sys/commit/c709ea0 [sys]
Used GitHub User po3rin (29445112) form for po3rin <abctail30@gmail.com> https://github.com/golang/go/commit/bf865823ba [go]
Used GitHub User pokutuna (57545) form for pokutuna <popopopopokutuna@gmail.com> https://github.com/golang/go/commit/46e0d724b3 [go]
Used GitHub User ramenjuniti (32011829) form for ramenjuniti <ramenjuniti@gmail.com> https://github.com/golang/go/commit/f9dd99cae3 [go]
Used GitHub User skanehira (7888591) form for skanehira <sho19921005@gmail.com> https://github.com/golang/go/commit/87805c92fd [go]
Used GitHub User utkarsh-extc (53217283) form for utkarsh-extc <53217283+utkarsh-extc@users.noreply.github.com> https://github.com/golang/sys/commit/51ab0e2 [sys]
Used GitHub User witchard (4994659) form for witchard <witchard@hotmail.co.uk> https://github.com/golang/go/commit/42db1da8e9 [go]
Used GitHub User zikaeroh (48577114) form for zikaeroh <zikaeroh@gmail.com> https://github.com/golang/tools/commit/e84277c2 [tools]
Used GitHub name "Adam Shelton" for Adam <aashelt90@gmail.com> https://github.com/golang/exp/commit/c286b88 [exp]
Used GitHub name "Andrew Bonventre" for Andrew <andybons@golang.org> https://github.com/golang/go/commit/8bbfc51d9a [arch blog build crypto debug exp gddo go image lint mobile net oauth2 perf playground proposal.git review sync sys talks term text time tools tour website]
Used GitHub name "David Bond" for davidsbond <davidsbond93@gmail.com> https://github.com/golang/go/commit/b421b85841 [go]
Used GitHub name "Eduardo Villaseñor" for galaxy-designer <evillasrmx@gmail.com> https://github.com/golang/tools/commit/db047d72 [tools]
Used GitHub name "George Hartzell" for hartzell <hartzell@alerce.com> https://github.com/golang/tools/commit/5eefd052 [tools]
Used GitHub name "Ignacio Hagopian" for jsign <jsign.uy@gmail.com> https://github.com/golang/go/commit/4d4ddd862d [go]
Used GitHub name "Ivan Markin" for nogoegst <nogoegst@users.noreply.github.com> https://github.com/golang/go/commit/a1addf15df [go]
Used GitHub name "Jun Zhang" for zoumo <jim.zoumo@gmail.com> https://github.com/golang/tools/commit/81ca6dc7 [tools]
Used GitHub name "Keiji Yoshida" for yosssi <yoshida.keiji.84@gmail.com> https://github.com/golang/lint/commit/ac6833c [lint]
Used GitHub name "Koki Tomoshige" for tomocy <tomocy.dev@gmail.com> https://github.com/golang/go/commit/2f04903fec [go]
Used GitHub name "Michalis Kargakis" for kargakis <mkargaki@redhat.com> https://github.com/golang/go/commit/e243d242d7 [go]
Used GitHub name "Nikita Vanyasin" for nikita-vanyasin <nikita.vanyasin@gmail.com> https://github.com/golang/go/commit/c3e8a20a65 [go]
Used GitHub name "Roberto Clapis" for Roberto <empijei@users.noreply.github.com> https://github.com/golang/go/commit/963776e689 [go]
Used GitHub name "Robin Eklind" for mewmew <rnd0x00@gmail.com> https://github.com/golang/go/commit/b8620afb8d [arch blog go proposal.git]
Used GitHub name "Sergei Lemeshkin" for sergeilem <sergeilem@gmail.com> https://github.com/golang/go/commit/a3a1bdff79 [go]
Used GitHub name "Vladimir Evgrafov" for vovapi <evgrafov.vladimir@gmail.com> https://github.com/golang/go/commit/207a0b7933 [go]
Updates #12042
Change-Id: I1ba3c17108491316255f914c3a71f69fc6f4341a
Reviewed-on: https://go-review.googlesource.com/c/go/+/213824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Currently, scavenging information is printed if the gctrace debug
variable is >0. Scavenging information is also printed naively, for
every page scavenged, resulting in a lot of noise when the typical
expectation for GC trace is one line per GC.
This change adds a new GODEBUG flag called scavtrace which prints
scavenge information roughly once per GC cycle and removes any scavenge
information from gctrace. The exception is debug.FreeOSMemory, which may
force an additional line to be printed.
Fixes#32952.
Change-Id: I4177dcb85fe3f9653fd74297ea93c97c389c1811
Reviewed-on: https://go-review.googlesource.com/c/go/+/212640
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The information requested by these flags is not available from the
vendor directory.
Noticed while diagnosing #36478.
Updates #33848
Change-Id: I2b181ba5c27f01fdd6277d8d0ab1003c05774ff7
Reviewed-on: https://go-review.googlesource.com/c/go/+/214081
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
'go list -m' allows explicit module@version arguments,
which it resolves (using Query) but does not add to the build list.
Similarly, 'go list -u' resolves versions without modifying the build list.
These explicit operations should be allowed even when '-mod=readonly' is set.
Updates #36478
'go list' and 'go mod download' do not
Change-Id: I5d2735729ad573635b9c1902d5d3a8bd960b8a76
Reviewed-on: https://go-review.googlesource.com/c/go/+/214077
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
On Windows, we implement asynchronous preemption using SuspendThread
to suspend other threads in our process. However, SuspendThread is
itself actually asynchronous (it enqueues a kernel "asynchronous
procedure call" and returns). Unfortunately, Windows' ExitProcess API
kills all threads except the calling one and then runs APCs. As a
result, if SuspendThread and ExitProcess are called simultaneously,
the exiting thread can be suspended and the suspending thread can be
exited, leaving behind a ghost process consisting of a single thread
that's suspended.
We've already protected against the runtime's own calls to
ExitProcess, but if Go code calls external code, there's nothing
stopping that code from calling ExitProcess. For example, in #35775,
our own call to racefini leads to C code calling ExitProcess and
occasionally causing a deadlock.
This CL fixes this by introducing synchronization between calling
external code on Windows and preemption. It adds an atomic field to
the M that participates in a simple CAS-based synchronization protocol
to prevent suspending a thread running external code. We use this to
protect cgocall (which is used for both cgo calls and system calls on
Windows) and racefini.
Tested by running the flag package's TestParse test compiled in race
mode in a loop. Before this change, this would reliably deadlock after
a few minutes.
Fixes#35775.
Updates #10958, #24543.
Change-Id: I50d847abcdc2688b4f71eee6a75eca0f2fee892c
Reviewed-on: https://go-review.googlesource.com/c/go/+/213837
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
In CL 204777, I made the "finding" messages in cachingRepo only print
after a “longish” delay, on the theory that they would help diagnose
slow or stuck fetches.
However, as I've been testing Go 1.14 beta 1, I've found that these
messages are mostly just noise, and the fact that they are so
nondeterministic causes both confusion and test flakes (#35539).
Moreover, it currently triggers once for each candidate module, when
what we're usually after is actually a specific package within the
module.
So let's log the package operation unconditionally instead of the
module fetches nondeterministically.
Fixes#35539
Updates #26152
Change-Id: I41a1c772465b2f0b357d3402bc372b6907773741
Reviewed-on: https://go-review.googlesource.com/c/go/+/213679
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
On Windows, it might be possible that SuspendThread suspends a
thread right between when an exception happens and when the
exception handler runs. (This is my guess. I don't know the
implementation detail of Windows exceptions to be sure.) In this
case, we may inject a call to asyncPreempt before the exception
handler runs. The exception handler will inject a sigpanic call,
which will make the stack trace looks like
sigpanic
asyncPreempt
actual panicking function
i.e. it appears asyncPreempt panicked.
Instead, just overwrite the PC, without pushing another frame.
Fixes#35773.
Change-Id: Ief4e964dcb7f45670b5f93c4dcf285cc1c737514
Reviewed-on: https://go-review.googlesource.com/c/go/+/213879
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
We know of at least one module (github.com/stripe/stripe-go) that has
a run of +incompatible versions, followed by a run of versions with
go.mod files, followed by another run of +incompatible versions.
We want the heuristics for showing +incompatible versions to reflect
the authors' current intent, and it seems clear that the current
intent of the authors of that module is for users of the unversioned
import path to still be on +incompatible versions.
To respect that intent, we need to keep checking for +incompatible
versions even after we have seen a lower major version with an
explicit go.mod file.
However, we still don't want to download every single version of the
module to check it. A given major version should have a consistent,
canonical import path, so the path (as inferred by the presence or
absence of a go.mod file) should be the same for every release across
that major version.
To avoid unnecessary overhead — and to allow module authors to correct
accidental changes to a major version's import path — we check only
the most recent release of each major version. If a release
accidentally changes the import path in either direction (by deleting
or adding a go.mod file), it can be corrected by issuing a single
subsequent release of that major version to restore the correct path.
I manually verified that, with this change,
github.com/stripe/stripe-go@latest reverts to v68.7.0+incompatible
as it was in Go 1.13.
The other regression tests for #34165 continue to pass.
Updates #34165
Change-Id: I5daff3cd2123f94c7c49519babf4eecd509f169e
Reviewed-on: https://go-review.googlesource.com/c/go/+/212317
Reviewed-by: Jay Conrod <jayconrod@google.com>
This avoids the security problem in #29312 where two very deep, but
distinct, types are given the same name. They both make it to the
linker which chooses one, and the use of the other is now type unsafe.
Instead, give every very deep type its own name. This errs on the
other side, in that very deep types that should be convertible to each
other might now not be. But at least that's not a security hole.
Update #29312.
Change-Id: Iac0ebe73fdc50594fd6fbf7432eef65f9a053126
Reviewed-on: https://go-review.googlesource.com/c/go/+/213517
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This is more readable and less error-prone than using RSP offsets.
Suggested during review of CL 212765.
Change-Id: I070190abeeac8eae5dbd414407602619d9d57422
Reviewed-on: https://go-review.googlesource.com/c/go/+/213577
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The TMPDIR environment variable isn't always available. Use $WORK/tmp
instead, to fix this test on Windows.
Change-Id: I521c470430c6eea4d1f2fc7db749d38178a03a13
Reviewed-on: https://go-review.googlesource.com/c/go/+/213680
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I accidentally used // instead of #.
Change-Id: I2c9b9d40dd83994ce80fc837e8d992d3807f3e24
Reviewed-on: https://go-review.googlesource.com/c/go/+/213659
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: I30230ca3b4d8b037ea861db952b89e706ed8706d
Reviewed-on: https://go-review.googlesource.com/c/go/+/213425
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This test already calls tg.Parallel
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: I4cdb2464cd3e51f1369558c238925f036ce8d828
Reviewed-on: https://go-review.googlesource.com/c/go/+/213426
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: Id4c2c58167d5cfc80b0d81ca9ce3db678242c06c
Reviewed-on: https://go-review.googlesource.com/c/go/+/213128
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, we accidentally wrote the Proxy-Authorization header for
the initial CONNECT request to the shared ProxyConnectHeader map when
it was non-nil.
Fixes#36431
Change-Id: I5cb414f391dddf8c23d85427eb6973f14c949025
Reviewed-on: https://go-review.googlesource.com/c/go/+/213638
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's hard to convert this one exactly because I don't think
we can guarantee that the grep command exists to filter stdout,
so I've tried to replicate the intent of the test.
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: Ib593799ef7634ce12efb3ff357eb34475e2ea321
Reviewed-on: https://go-review.googlesource.com/c/go/+/213130
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Convert these two tests to the script framework.
Updates #17751
Updates #36320
Change-Id: I9cc14360fab949dab91f9e5e667be85002ef5926
Reviewed-on: https://go-review.googlesource.com/c/go/+/212811
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: I6573185cf14f298c51f76265f18a75e4960ce791
Reviewed-on: https://go-review.googlesource.com/c/go/+/213220
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Correct the pipe and pipe2 implementations by using the correct RSP offsets,
used to store and return the file descriptor array.
Fix setNonblock by using the correct immediate value for O_NONBLOCK and
replace EOR (exclusive OR) with ORR.
Also correct the write1 implementation, which has a uintptr value for the fd
argument.
Change-Id: Ibca77af44b649e8bb330ca54f9c36a7a8b0f9cea
Reviewed-on: https://go-review.googlesource.com/c/go/+/212765
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The current code uses EOR (exclusive OR), which will result in the O_NONBLOCK
flag being toggled rather than being set. Other implementations use OR, hence
this is likely a bug.
Change-Id: I5dafa9c572452070bd37789c8a731ad6d04a86cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/212766
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In reclaimChunk, the runtime is calling traceGCSweepDone() while holding the mheap
lock. traceGCSweepDone() can call traceEvent() and traceFlush(). These functions
not only can get various trace locks, but they may also do memory allocations
(runtime.newobject) that may end up getting the mheap lock. So, there may be
either a self-deadlock or a possible deadlock between multiple threads.
It seems better to release the mheap lock before calling traceGCSweepDone(). It is
fine to release the lock, since the operations to get the index of the chunk of
work to do are atomic. We already release the lock to call sweep, so there is no
new behavior for any of the callers of reclaimChunk.
With this change, mheap is a leaf lock (no other lock is ever acquired while it
is held).
Testing: besides normal all.bash, also ran all.bash with --long enabled, since
it does longer tests of runtime/trace.
Change-Id: I4f8cb66c24bb8d424f24d6c2305b4b8387409248
Reviewed-on: https://go-review.googlesource.com/c/go/+/207846
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
In the previous CL we ensures that memmove writes pointers
atomically, so the concurrent GC won't observe a partially
updated pointer. This CL adds a test.
Change-Id: Icd1124bf3a15ef25bac20c7fb8933f1a642d897c
Reviewed-on: https://go-review.googlesource.com/c/go/+/212627
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change converts TestCoverageWithCgo and TestCgoConsistentResults
to the script framework.
Change-Id: Ic5a13f6dd6099d3d73a5cda8cbc724a79a3d2c58
Reviewed-on: https://go-review.googlesource.com/c/go/+/212621
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: Ibc3cb3823bd1c1b80058076f2c9933dc729447a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/213127
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Addressing comment in golang.org/cl/212620. I submitted the
change before I addressed the comment.
Change-Id: I008fdb4fed1e0b2d24d739991fe10122695b90b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/213419
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
It's already parallel, but we might as well convert it and
get rid of the testdata/src dircetory completely.
Updates #36320
Change-Id: I75e335b32d64a8ddedd65e4337949b729c9e0fbe
Reviewed-on: https://go-review.googlesource.com/c/go/+/212877
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This change converts TestFatalInBenchmarkCauseNonZeroExitStatus,
TestBenchmarkLabels and TestWildCardsDoNotLookInUselessDirectories
to the script framework so they can run in parallel. These tests
used the testdata directory so they didn't call tg.parallel, because
they couldn't be sure the testdata directory wasn't being
modified while they were being run.
The tests are converted to the script framework instead of being modified
because the script framework tests are easier to read and are self-contained.
Also remove the directory src/cmd/go/testdata/src/badc. The testcase
that used it, "TestDisallowedCSourceFiles" was deleted in
golang.org/cl/19613.
Updates #17751
Change-Id: I0b9b417ae1a9b148067a3e5f8531229f3414f104
Reviewed-on: https://go-review.googlesource.com/c/go/+/212620
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
