ssagen.ssafn already holds the ir.Func, and ssa.Frontend.SetWBPos and
ssa.Frontend.Lsym are simple wrappers around parts of the ir.Func.
Expose the ir.Func through ssa.Frontend, allowing us to remove these
wrapper methods and allowing future access to additional features of the
ir.Func if needed.
While we're here, drop ssa.Frontend.Line, which is unused.
For #58298.
Change-Id: I30c4cbd2743e9ad991d8c6b388484a7d1e95f3ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/484215
Auto-Submit: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
Frame pointer unwinding during execution tracing sometimes crashes.
Until this is diagnosed and fixed, it should be turned off by default.
Updates #59692
Change-Id: I0f2ca24b6d48435b0acfd3da8e4f25b9cfa4ec19
Reviewed-on: https://go-review.googlesource.com/c/go/+/486382
Reviewed-by: Felix Geisendörfer <felix.geisendoerfer@datadoghq.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Nick Ripley <nick.ripley@datadoghq.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Michael Pratt <mpratt@google.com>
The scavenge index currently doesn't guard against overflow, and CL
436395 removed the minHeapIdx optimization that allows the chunk scan to
skip scanning chunks that haven't been mapped for the heap, and are only
available as a consequence of chunks' mapped region being rounded out to
a page on both ends.
Because the 0'th chunk is never mapped, minHeapIdx effectively prevents
overflow, fixing the iOS breakage.
This change also refactors growth and initialization a little bit to
decouple it from pageAlloc a bit and share code across platforms.
Change-Id: If7fc3245aa81cf99451bf8468458da31986a9b0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/486695
Auto-Submit: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Add a struct called Source that holds the function, file and line
of a location in the program's source code.
When HandleOptions.AddSource is true, the ReplaceAttr function will
get an Attr whose key is SourceKey and whose value is a *Source.
We use *Source instead of Source to save an allocation. The pointer
and the value each cause one allocation up front: the pointer when it
is created, and the value when it is assigned to the `any` field of a
slog.Value (handle.go:283). If a ReplaceAttr function wanted to modify
a Source value, it would have to create a new slog.Value to return,
causing a second allocation, but the function can modify a *Source in
place.
TextHandler displays a Source as "file:line".
JSONHandler displays a Source as a group of its non-zero fields.
This replaces the previous design, where source location was always a
string with the format "file:line". The new design gives users more
control over how to output and consume source locations.
Fixes#59280.
Change-Id: I84475abd5ed83fc354b50e34325c7b246cf327c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/486376
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Jonathan Amsterdam <jba@google.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
During bootstrapping, cmd/dist writes a file indicating which
GOOS/GOARCH combinations are valid, and which support cgo-enabled
builds. That information previously went into the go/build package,
but today it fits in more naturally in the internal/platform package
(which already has a number of functions indicating feature support
for GOOS/GOARCH combinations).
Moreover, as of CL 450739 the cmd/go logic for determining whether to
use cgo is somewhat more nuanced than the go/build logic: cmd/go
checks for the presence of a C compiler, whereas go/build does not
(mostly because it determines its configuration at package-init time,
and checking $PATH for a C compiler is somewhat expensive).
To simplify this situation, this change:
- consolidates the “cgo supported” check in internal/platform
(alongside many other platform-support checks) instead of making
it a one-off in go/build,
- and updates a couple of tests to use testenv.HasCGO instead of
build.Default.CgoEnabled to decide whether to test a cgo-specific
behavior.
For #58884.
For #59500.
Change-Id: I0bb2502dba4545a3d98c9e915727382ce536a0f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/483695
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Bryan Mills <bcmills@google.com>
Refactor io.ReadAll to check for realloc of the buffer only after the
first read.
Fixes: #59702
Change-Id: I93b99139e6756f21738d47e7d9ad08e1d167258e
Reviewed-on: https://go-review.googlesource.com/c/go/+/486236
Auto-Submit: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
This reverts commit CL 486379.
Submitted out of order and breaks bootstrap.
Change-Id: Ie20a61cc56efc79a365841293ca4e7352b02d86b
Reviewed-on: https://go-review.googlesource.com/c/go/+/486917
TryBot-Bypass: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
This reverts commit CL 486380.
Submitted out of order and breaks bootstrap.
Change-Id: I67bd225094b5c9713b97f70feba04d2c99b7da76
Reviewed-on: https://go-review.googlesource.com/c/go/+/486916
Reviewed-by: David Chase <drchase@google.com>
TryBot-Bypass: Austin Clements <austin@google.com>
This reverts commit CL 486381.
Submitted out of order and breaks bootstrap.
Change-Id: Ia472111cb966e884a48f8ee3893b3bf4b4f4f875
Reviewed-on: https://go-review.googlesource.com/c/go/+/486915
Reviewed-by: David Chase <drchase@google.com>
TryBot-Bypass: Austin Clements <austin@google.com>
The current definitions of StackLimit and StackGuard only indirectly
specify the NOSPLIT stack limit and duplicate a literal constant
(928). Currently, they define the stack guard delta, and from there
compute the NOSPLIT limit.
Rationalize these by defining a new constant, abi.StackNosplitBase,
which consolidates and directly specifies the NOSPLIT stack limit (in
the default case). From this we then compute the stack guard delta,
inverting the relationship between these two constants. While we're
here, we rename StackLimit to StackNosplit to make it clearer what's
being limited.
This change does not affect the values of these constants in the
default configuration. It does slightly change how
StackGuardMultiplier values other than 1 affect the constants, but
this multiplier is a pretty rough heuristic anyway.
before after
stackNosplit 800 800
_StackGuard 928 928
stackNosplit -race 1728 1600
_StackGuard -race 1856 1728
For #59670.
Change-Id: Ibe20825ebe0076bbd7b0b7501177b16c9dbcb79e
Reviewed-on: https://go-review.googlesource.com/c/go/+/486380
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We really need 3 mix steps between the data being hashed and the output.
One mix can only spread a 1 bit change to 32 bits. The second mix
can spread to all 128 bits, but the spread is not complete. A third mix
spreads out ~evenly to all 128 bits.
The amd64 version has 3 mix steps.
Fixes#59643
Change-Id: I54ad8686ca42bcffb6d0ec3779d27af682cc96e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/486616
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Currently these fields are uninitialized causing failures on aix-ppc64,
which has a slightly oddly-defined address space compared to the rest.
Change-Id: I2aa46731174154dce86c2074bd0b00eef955d86d
Reviewed-on: https://go-review.googlesource.com/c/go/+/486655
Auto-Submit: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Bypass: Michael Knyszek <mknyszek@google.com>
The gVisor team reported a regression in their checkers,
which don't set Config.GoVersion, processing files that say
//go:build go1.13 but still use 'any' (which happened in Go 1.18).
That situation should continue to work, since it worked before,
so add a special case for not knowing the GoVersion.
Change-Id: I8820d8ccbdf76d304e2c7e45f6aaa993ff3d16a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/486398
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Remove calls to Value.Resolve from Record.AddAttrs, Record.Add and Logger.With.
Handlers must resolve values themselves; document that in Handler.
Call Value.Resolve in the built-in handlers.
Updates #59292.
Change-Id: I00ba2131be0b16e3b1a22741249fd6f81c3efde1
Reviewed-on: https://go-review.googlesource.com/c/go/+/486375
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Jonathan Amsterdam <jba@google.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
Found by running
$ go run golang.org/x/tools/go/analysis/passes/nilness/cmd/nilness@latest std
No actual bugs--other than one panic(nil)--but a
few places where error nilness was unclear.
Change-Id: Ia916ba30f46f29c1bcf928cc62280169b922463a
Reviewed-on: https://go-review.googlesource.com/c/go/+/486675
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Alan Donovan <adonovan@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Alan Donovan <adonovan@google.com>
The point of DialWithTimeout seems to be to test what happens when the
connection times out during handshake. However, the test wasn't
actually verifying that the connection made it into the handshake at
all. That would not only fail to test the intended behavior, but also
leak the Accept goroutine until arbitrarily later, at which point it
may call t.Error after the test t is already done.
Instead, we now:
- retry the test with a longer timeout if we didn't accept a
connection, and
- wait for the Accept goroutine to actually complete when the test
finishes.
Fixes#59646.
Change-Id: Ie56ce3297e2c183c02e67b8f6b26a71e50964558
Reviewed-on: https://go-review.googlesource.com/c/go/+/485115
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Commit-Queue: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add an AfterFunc function, which registers a function to run after
a context has been canceled.
Add support for contexts that implement an AfterFunc method, which
can be used to avoid the need to start a new goroutine watching
the Done channel when propagating cancellation signals.
Fixes#57928
Change-Id: If0b2cdcc4332961276a1ff57311338e74916259c
Reviewed-on: https://go-review.googlesource.com/c/go/+/482695
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Damien Neil <dneil@google.com>
Reviewed-by: Sameer Ajmani <sameer@golang.org>
Previously, all.bash and all.bat restored the original $PATH before
calling 'dist banner', so that it would do its job of checking whether
the user still needs to add $GOROOT/bin to their $PATH. That worked for
those scripts, but had no effect on make.bash nor make.bat.
Instead of trying to extend that logic to more scripts, change the
approach to provide dist an unmodified copy of $PATH via an internal
to dist environment variable $DIST_UNMODIFIED_PATH. The make.bash and
make.bat scripts happen to use dist env -p to modify $PATH, making it
viable to add the internal variable there instead of in each script.
It currently works by adding semicolon terminators to dist env output
so that make.bash's 'eval $(dist env -p)' works as before but is able to
export DIST_UNMODIFIED_PATH for following dist invocations to observe.
Nothing needs to be done for Windows since its 'set ENV=val' format
already has that effect.
Plan 9 doesn't use the -p flag of dist env, and checks that GOROOT/bin
is bound before /bin rather than looking at the $PATH env var like other
OSes, so it may not have this bug. I don't have easy access to Plan 9
and haven't tried to confirm.
Fixes#42563.
Change-Id: I74691931167e974a930f7589d22a48bb6b931163
Reviewed-on: https://go-review.googlesource.com/c/go/+/485896
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
This change makes it so that on Linux the Go runtime explicitly marks
page heap memory as either available to be backed by hugepages or not
using heuristics based on density.
The motivation behind this change is twofold:
1. In default Linux configurations, khugepaged can recoalesce hugepages
even after the scavenger breaks them up, resulting in significant
overheads for small heaps when their heaps shrink.
2. The Go runtime already has some heuristics about this, but those
heuristics appear to have bit-rotted and result in haphazard
hugepage management. Unlucky (but otherwise fairly dense) regions of
memory end up not backed by huge pages while sparse regions end up
accidentally marked MADV_HUGEPAGE and are not later broken up by the
scavenger, because it already got the memory it needed from more
dense sections (this is more likely to happen with small heaps that
go idle).
In this change, the runtime uses a new policy:
1. Mark all new memory MADV_HUGEPAGE.
2. Track whether each page chunk (4 MiB) became dense during the GC
cycle. Mark those MADV_HUGEPAGE, and hide them from the scavenger.
3. If a chunk is not dense for 1 full GC cycle, make it visible to the
scavenger.
4. The scavenger marks a chunk MADV_NOHUGEPAGE before it scavenges it.
This policy is intended to try and back memory that is a good candidate
for huge pages (high occupancy) with huge pages, and give memory that is
not (low occupancy) to the scavenger. Occupancy is defined not just by
occupancy at any instant of time, but also occupancy in the near future.
It's generally true that by the end of a GC cycle the heap gets quite
dense (from the perspective of the page allocator).
Because we want scavenging and huge page management to happen together
(the right time to MADV_NOHUGEPAGE is just before scavenging in order to
break up huge pages and keep them that way) and the cost of applying
MADV_HUGEPAGE and MADV_NOHUGEPAGE is somewhat high, the scavenger avoids
releasing memory in dense page chunks. All this together means the
scavenger will now more generally release memory on a ~1 GC cycle delay.
Notably this has implications for scavenging to maintain the memory
limit and the runtime/debug.FreeOSMemory API. This change makes it so
that in these cases all memory is visible to the scavenger regardless of
sparseness and delays the page allocator in re-marking this memory with
MADV_NOHUGEPAGE for around 1 GC cycle to mitigate churn.
The end result of this change should be little-to-no performance
difference for dense heaps (MADV_HUGEPAGE works a lot like the default
unmarked state) but should allow the scavenger to more effectively take
back fragments of huge pages. The main risk here is churn, because
MADV_HUGEPAGE usually forces the kernel to immediately back memory with
a huge page. That's the reason for the large amount of hysteresis (1
full GC cycle) and why the definition of high density is 96% occupancy.
Fixes#55328.
Change-Id: I8da7998f1a31b498a9cc9bc662c1ae1a6bf64630
Reviewed-on: https://go-review.googlesource.com/c/go/+/436395
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
An apparent typo in CL 484837 caused the test to check for ErrExist
instead of ErrNotExist when opening /dev/net/tun for read. That causes
the test to fail on platforms where /dev/net/ton does not exist,
such as on the darwin-amd64-longtest builder.
Updates #59545.
Change-Id: I9402ce0dba11ab459674e8358ae9a8b97eabc8d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/486255
Run-TryBot: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
Commit-Queue: Bryan Mills <bcmills@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Marking variables in erroneous variable declarations as used is
convenient for tests but doesn't necessarily hide follow-on errors
in real code: either the variable is not supposed to be declared in
the first place and then we should get an error if it is not used,
or it is there because it is intended to be used, and the we expect
an error it if is not used.
This brings types2 closer to go/types.
Change-Id: If7ee1298fc770f7ad0cefe7e968533fd50ec2343
Reviewed-on: https://go-review.googlesource.com/c/go/+/486175
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The relevant code was broken with CL 478218. Before that CL,
Checker.assignVar used to return the assigned type, or nil,
in case of failure. Checker.recordCommaOkTypes used to take
two types (not two operands), and if one of those types was
nil, it would simply not record. CL 478218, lost that (nil)
signal.
This change consistently reports an assignment check failure
by setting x.mode to invalid for initVar and assignVar and
then tests if x.mode != invalid before recording a comma-ok
expression.
Fixes#59371.
Change-Id: I193815ff3e4b43e3e510fe25bd0e72e0a6a816c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/486135
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Use syscall.BytePtrFromString and syscall.ByteSliceFromString.
Change-Id: I9409ecd93aaca82390bf3f34be56ec354148a241
Reviewed-on: https://go-review.googlesource.com/c/go/+/486015
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Per the doc string, Checker.assignment must set x.mode to invalid
in case of failure.
(It may be simpler to return a bool, but the operand x may be tested
by callers several stack frames above.)
Change-Id: Ia1789b0396e8338103c0e707761c46f8d253fd31
Reviewed-on: https://go-review.googlesource.com/c/go/+/485875
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Frame pointer is enabled on ARM64. When copying stacks, the
saved frame pointers need to be adjusted.
Updates #39524, #40044.
Fixes#58432.
Change-Id: I73651fdfd1a6cccae26a5ce02e7e86f6c2fb9bf7
Reviewed-on: https://go-review.googlesource.com/c/go/+/241158
Reviewed-by: Felix Geisendörfer <felix.geisendoerfer@datadoghq.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reapplies CL 481075, which was a reappliation of CL 478917.
This CL has been reverted twice now due to conflicts with CL 392854 /
CL 481061, which had bugs and had to be reverted.
Now this CL skips the conflicting changes to runtime/cgo/asm_ppc64x.s,
which will be merged directly into a new version of CL 392854 /
CL 481061. That way, if there are _more_ issues, this CL need not be
involved in any more reverts.
Change-Id: I2801b918faf9418dd0edff19f2a63f4d9e08896c
Reviewed-on: https://go-review.googlesource.com/c/go/+/485335
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Michael Pratt <mpratt@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Add more rules to ensure that order doesn't matter.
Add memequal 0 rule.
Try to use a constant argument to memequal when one is available.
Fixes#59684
Change-Id: I36e85ffbd949396ed700ed6e8ec2bc3ae013f5d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/485535
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Test cases added to debug/dwarf because that is where it matters in practice.
The new test binary line-gcc-zstd.elf built with
gcc -g -no-pie -Wl,--compress-debug-sections=zstd line[12].c
using
gcc (Debian 12.2.0-10) 12.2.0
with a development version of the GNU binutils.
Fixes#55107
Change-Id: I48507c96902e1f83a174e5647b5cc403d965b52b
Reviewed-on: https://go-review.googlesource.com/c/go/+/473256
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
This package only does zstd decompression, which is starting to
be used for ELF debug sections. If we need zstd compression we
should use github.com/klauspost/compress/zstd. But for now that
is a very large package to vendor into the standard library.
For #55107
Change-Id: I60ede735357d491be653477ed419cf5f2f0d3f71
Reviewed-on: https://go-review.googlesource.com/c/go/+/473356
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Joseph Tsai <joetsai@digital-static.net>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
It is possible for a netpoll file to be closed and for the pollDesc
to be reused while a netpoll is running. This normally only causes
spurious wakeups, but if there is an error on the old file then the
new file can be incorrectly marked as having an error.
Fix this problem on most systems by introducing an fd sequence field
and using that as a tag in a taggedPointer. The taggedPointer is
stored in epoll or kqueue or whatever is being used. If the taggedPointer
returned by the kernel has a tag that does not match the fd
sequence field, the notification is for a closed file, and we
can ignore it. We check the tag stored in the pollDesc, and we also
check the tag stored in the pollDesc.atomicInfo.
This approach does not work on 32-bit systems where the kernel
only provides a 32-bit field to hold a user value. On those systems
we continue to use the older method without the sequence protection.
This is not ideal, but it is not an issue on Linux because the kernel
provides a 64-bit field, and it is not an issue on Windows because
there are no poller errors on Windows. It is potentially an issue
on *BSD systems, but on those systems we already call fstat in newFile
in os/file_unix.go to avoid adding non-pollable files to kqueue.
So we currently don't know of any cases that will fail.
Fixes#59545
Change-Id: I9a61e20dc39b4266a7a2978fc16446567fe683ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/484837
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Orlando Labao <orlando.labao43@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Bypass: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Bypass: Ian Lance Taylor <iant@golang.org>
This is a refactoring with no change in behavior, in preparation
for future netpoll work.
For #59545
Change-Id: I493c5fd0f49f31b75787f7b5b89c544bed73f64f
Reviewed-on: https://go-review.googlesource.com/c/go/+/484836
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Orlando Labao <orlando.labao43@gmail.com>
This was a remaining place where we made the assumption that there is
only one workspace module. So we'd only skip the first workspace
module when running go mod verify. Instead skip over the first
MainModules.Len() modules of the buildlist, which are all the main
modules.
Fixes#54372
Change-Id: Ife687c907ae4326759c43cc35f78d429d5113b19
Reviewed-on: https://go-review.googlesource.com/c/go/+/485475
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Currently android doesn't include godebug.md in its doc folder, and
TestAll in godebugs_test.go is failing because it can't open the file.
Add a skip in case the file is missing (except for linux so we can
catch the case where we stop generating the file).
Change-Id: I37a711e49a494c33bc92bf3e31cf40471ea9d5b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/485795
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This avoids the panic for godebugs without documentation. Perhaps we
eventually want to remove this godebug.
Change-Id: I032cdded0f3ccf6681821286e2cb6f0b90a318c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/485756
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Bypass: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
There's a stub for gotoolchain.go for the js build tag because js/wasm
doesn't define syscall.Exec. But there are builders that are wasm but
not js, which also don't have syscall.Exec. The wasip1 GOOS is one
example. Stub out gotoolchain.go for wasip1 also.
Change-Id: I224bb385474ad9c5d3c28a83a000f450dfb43c0d
Reviewed-on: https://go-review.googlesource.com/c/go/+/485735
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
This reverts commit http://go.dev/cl//484859
Reason for revert: causes linker errors in a number of google-internal tests.
Change-Id: I322252f784a46d2b1d447ebcdca86ce14bc0cc91
Reviewed-on: https://go-review.googlesource.com/c/go/+/485755
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
This new TCPConn method returns whether the connection is using MPTCP or
if a fallback to TCP has been done, e.g. because the other peer doesn't
support MPTCP.
When working on the new E2E test linked to MPTCP (#56539), it looks like
the user might need to know such info to be able to do some special
actions (report, stop, etc.). This also improves the test to make sure
MPTCP has been used as expected.
Regarding the implementation, from kernel version 5.16, it is possible
to use:
getsockopt(..., SOL_MPTCP, MPTCP_INFO, ...)
and check if EOPNOTSUPP (IPv4) or ENOPROTOOPT (IPv6) is returned. If it
is, it means a fallback to TCP has been done. See this link for more
details:
https://github.com/multipath-tcp/mptcp_net-next/issues/294
Before v5.16, there is no other simple way, from the userspace, to check
if the created socket did a fallback to TCP. Netlink requests could be
done to try to find more details about a specific socket but that seems
quite a heavy machinery. Instead, only the protocol is checked on older
kernels.
The E2E test has been modified to check that the MPTCP connection didn't
do any fallback to TCP, explicitely validating the two methods
(SO_PROTOCOL and MPTCP_INFO) if it is supported by the host.
This work has been co-developed by Gregory Detal
<gregory.detal@tessares.net> and Benjamin Hesmans
<benjamin.hesmans@tessares.net>.
Fixes#59166
Change-Id: I5a313207146f71c66c349aa8588a2525179dd8b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/471140
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
This new function wraps the getsockopt network call with an integer
argument, similar to SetsockoptInt.
This will be used in MPTCP in the following commit.
This work has been co-developed by Gregory Detal
<gregory.detal@tessares.net>.
Updates #59166
Change-Id: I8f6aa00ea2535683d9bbf436993c23e9c6ca2af3
Reviewed-on: https://go-review.googlesource.com/c/go/+/471139
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change-Id: Ia3174d079e84cf874c2f2f3093a7c6337af32b02
Reviewed-on: https://go-review.googlesource.com/c/go/+/485015
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
