Some failure modes for suggested fixes were not displaying a failure
message. Refactor so that all errors result in a message.
Fixesgolang/go#41413
Change-Id: I939d707626c2bd93c19e28f2197f4f1c66c6947c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/255128
Run-TryBot: Robert Findley <rfindley@google.com>
gopls-CI: kokoro <noreply+kokoro@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is better than parsing the default output.
Also, change the start progress message, since it ends up duplicating
the title in the message that the user sees.
Change-Id: I3540d30c7976c6be0722531b2e258341081e0b72
Reviewed-on: https://go-review.googlesource.com/c/tools/+/251920
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When falling back to messages for progress reporting, don't try to
implement cancellation via ShowMessageCommand dialogs. They are an
imperfect solution, as the dialog stays open even after the command
completed. Also, among the LSP clients that don't support workDone
reporting, I suspect many also don't support ShowMessageCommand (for
example, govim), so the audience for this feature is probably quite
small.
Just remove it, and instead show a (non-cancellable) message. If clients
want cancellation, workDone progress support is the way to provide it.
Also remove a redundant message on go-generate success, and attach logs
when tests fail. Without logs on failure, I find that the test command
is not very useful. I tested a bit with very verbose test output, and
both VS Code and coc.nvim handled it gracefully.
Finally, fix a bug causing benchmarks not to be run.
Change-Id: I05422bcefc857c25cd99e643e614a0bc33870586
Reviewed-on: https://go-review.googlesource.com/c/tools/+/249702
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change contains several improvements for progress reporting:
+ Consolidate the 'progressWriter' interface into the workDone
interface. Now all progress reporting should use workDone, and the
workDoneWriter struct is just an io.Writer adapter on top of
workDone.
+ Factor out the pattern of progress reporting, and use for all
asynchronous commands.
+ Make several commands that were previously synchronous async.
+ Add a test for cancellation when the WorkDone API is not supported.
+ Always report workdone progress using a detached context.
+ Update 'run tests' to use the -v option, and merge stderr and stdout,
to increase the amount of information reported.
+ Since $/progress reporting is now always run with a detached context,
the 'NoOutstandingWork' expectation should now behave correctly. Use
it in a few places.
A follow-up CL will improve the messages reported on command completion.
For golang/go#40634
Change-Id: I7401ae62f7ed22d76e558ccc046e981622a64b12
Reviewed-on: https://go-review.googlesource.com/c/tools/+/248918
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
CL 248380 forced all type checking to be in the default workspace mode.
In that CL, I said I couldn't think of any features that would break. It
appears I didn't think very hard. Navigation features inside of
dependencies are something I use all the time and they broke.
Reintroduce the ability to get packages in a particular mode, and make
it convenient to get them in all relevant modes. Update some critical
features to do so, and add regression tests.
Fixesgolang/go#40809.
Change-Id: I96279f4ff994203694629ea872795246c410b206
Reviewed-on: https://go-review.googlesource.com/c/tools/+/249120
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Some Commands require that the buffer is saved before running them (i.e.
generate, test and toggle details). If the buffer isn't saved gopls
sends a ShowMessage request to the client. Before this change it
did not return any error from the ExecuteCommand request itself (unless
ShowMessage failed).
A progress token can be provided by the client as a part of the
ExecuteCommand request, and that is, according to the LSP spec one way
to start a WorkDoneProgress. At this point the client expects
that gopls send progress updates.
With this change, ExecuteCommand now return an error if the buffer
isn't saved, so that the client know that it shouldn't expect any
progress updates with this specific token.
Change-Id: I8a7af20a0c1532fc4ad03efd4e04bfb1a6871644
Reviewed-on: https://go-review.googlesource.com/c/tools/+/248766
Run-TryBot: Pontus Leitzler <leitzler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This CL adds a code lens to run all benchmarks in a file. Additionally,
it updates the test command handler to better support both tests and
benchmarks.
Updates golang/go#36787
Change-Id: I6e90460f7d97607f96c263be0754537764bd0052
Reviewed-on: https://go-review.googlesource.com/c/tools/+/246017
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The GC-based cache has given us a number of problems. First, memory
leaks driven by reference cycles: the Go runtime cannot collect cycles
involving finalizers, which prevents us from writing natural code in
Bind callbacks. If we screw it up, we get a mysterious leak that takes a
long time to track down. Second, the behavior is generally mysterious;
it's hard to predict how long a value lasts, and harder to tell if a
value being live is a bug. Third, we think that it may be interacting
poorly with the GC, resulting in unnecessary memory usage.
The structure of the values we put in the cache is not actually that
complicated -- there are only 5 significant types: parse, typecheck,
analyze, parse mod, and analyze mod. Managing them manually should not
be conceptually difficult, and in fact we already do most of the work
in (*snapshot).clone.
In this CL the cache adds the concept of "generations", which function
as reference counts on cache entries. Entries are still global and
shared across generations, but will be explicitly deleted once no
generations refer to them. The idea is that each snapshot is a new
generation, and can inherit entries from the previous snapshot or leave
them behind to be deleted.
One obvious risk of this scheme is that we'll leave dangling references
to values without actually inheriting them across generations. To
prevent that, getting a value requires passing in the generation at
which it's being read, and an error will be returned if that generation
is dead.
Change-Id: I4b30891efd7be4e10f2b84f4c067b0dee43dcf9c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242838
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Progress reporting has gotten complicated, and has had a couple bugs.
Factor out progress-related behavior to a new progressTracker type, and
use this to implement some unit tests.
Also rename some methods to remove stuttering, and reorganize the code
to be more logical.
Fixesgolang/go#40527
Change-Id: I93d53a67982460e7171f892021e99f4523fe3e5d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/247407
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Our WorkDone reporting was generating a random token for each unit of
work, even if a token was supplied by the client. Change this to use
the client token if it is non-empty, and skip the
workDoneProgress/create request.
After this change we can no longer rely on tokens being a string.
Update our progress tracking accordingly.
For golang/go#40527
Change-Id: I702f739c466efb613b69303aaf07005addd3b5e2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/247321
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
To manually collect cache entries, we need to know when a snapshot is
idle. Add a reference count in the form of a WaitGroup and keep track of
its uses. The pattern is that any time a snapshot is returned, it comes
with a release function that decrements the ref count.
Almost all uses of a snapshot originate in a user-facing request,
handled in beginFileRequest. There it's mostly an exercise in passing
Snapshots around instead of Views.
In the other places I took the path of least resistance. For file
modifications I tried to minimize the amount of code that needed to deal
with snapshots. For diagnostics I just acquired the snapshot at the
diagnostics call.
Change-Id: Id48a2df3acdd97f27d905e2c2be23072f28f196b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/241837
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Packages that have gc_details enabled is stored internally in a
map[span.URI]struct{}, but when toggling on/off via ExecuteCommand, the
scheme is lost. The mismatch lead to no diagnostics from gc_details.
This fix uses span.URIFromPath() to parse the file path, so that the
internal keys are found when diagnostics are calculated.
Change-Id: I53b4e869625251c366b12b570eb03212319d2770
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245858
Run-TryBot: Pontus Leitzler <leitzler@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There were a few merge conflict-related issues in the GC optimization
details CL. Also fixed a few things I noticed after the fact, like
separating out a new mutex.
Staticcheck caught a few things, and I also fixed a bug I noticed
in the cache package.
Change-Id: I3fc519373253418586dca08fdec3114b30a247ea
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245399
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Peter Weinberger <pjw@google.com>
The gc compiler will report its decisions about inlining, escapes, etc.
This can be turned on and off with a new optional code lens gc_details.
When enabled, the code lens will be displayed above the package
statement. The compiler's decisions are shown as information diagnostics.
(Other diagnostics have been errors and warnings.)
Change-Id: I7d1d5b5b5cf8acd7ff08f683e537ea618e269547
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243119
Run-TryBot: Peter Weinberger <pjw@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I'm not sure how the regtest didn't catch this - is it possible that
it could unmarshal a single string a slice of string? Either way, I'd
like to get the fix in quicker - I'll try to add more regtests for this
later.
Also, validate the upgrade results more thoroughly.
Change-Id: I812a3fecd9f0642a1408c0a9c0376bb98d50b397
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245065
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The logic for extracting a function is quite signficant, and the code
is expensive enough that we should only call it when requested by the
user. This means that we should support extracting through a command
rather than text edits in the code action.
To that end, we create a new struct for commands. Features like extract
variable and extract function can supply functions to determine if they
are relevant to the given range, and if so, to generate their text
edits. source.Analyzers now point to Commands, rather than
SuggestedFixFuncs. The "canExtractVariable" and "canExtractFunction"
functions still need improvements, but I think that can be done in a
follow-up.
Change-Id: I9ec894c5abdbb28505a0f84ad7c76aa50977827a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244598
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This CL is a follow-up from CL 241983. I didn't realize that the
undeclaredname analysis was also using the go/printer.Fprint trick,
which we decided was both incorrect and inefficient. This CL does
approximately the same things as CL 241983, with a few changes to make
the approach more general.
source.Analyzer now has a field to indicate if its suggested fix needs
to be computed separately, and that is used to determine which
code actions get commands. We also make helper functions to map
analyses to their commands.
I figured out a neater way to test suggested fixes in this CL, so I
reversed the move to source_test back to lsp_test (which was the right
place all along).
Change-Id: I505bf4790481d887edda8b82897e541ec73fb427
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242366
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This CL adds benchmarking by using the "-bench" flag for the test
command.
Change-Id: Idf714de1c6c3350d26a6874e7b4278927d0336fd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243159
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Our approach to commands and their arguments has been ad-hoc until this
point. This CL creates a standard way of defining and passing the
arguments to different commands. The arguments to a command are now
json.RawMessages, so that we don't have to double encode. This also
allows us to check the expected number of arguments without defining
a struct for every command.
Change-Id: Ic765c9b059e8ec3e1985046d13bf321be21f16ab
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242697
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change moves the suggested fixes logic for fillstruct out of the
analysis and into internal/lsp/source. This logic is then used as part
of a new fillstruct command. This command is returned along with the
code action results, to be executed only when the user accepts the code
action.
This led to a number of changes to testing. The suggested fix tests in
internal/lsp doesn't support executing commands, so we skip them. The
suggested fix tests in internal/lsp/source are changed to call
fillstruct directly. A new regtest is added to check the command
execution, which led to a few regtest changes.
Also, remove the `go mod tidy` code action, as it's made redundant by
the existence of the suggested fixes coming from internal/lsp/mod.
Change-Id: I35ca0aff1ace8f0097fe7cb57232997facb516a4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/241983
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change moves the "generic" go generate code lens code into
progress.go. Fix up a few generate-specific things in the progress
writers.
The remaining generate code isn't much, and is moved into command.go.
Change-Id: I2b7b6279da2442c0b92758b9b3e259f25787fabc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242919
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
I wanted to add a regtest for this, but then immediately got stumped on
how to do it well. The best I've got is to add a helper that wraps
the client's call to executeCommand, but it's used in so many places that
an easier fix was to put it in executeCommand itself.
Fixesgolang/go#40101
Change-Id: Iafb804fb77e57e6ac01e3de1d115058b21ac1954
Reviewed-on: https://go-review.googlesource.com/c/tools/+/241984
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
These are commands whose changes should be reflected in the existing
go.mod file, as they do not provide edits. Add a third way of running
the go command, explicitly without -modfile. Update the regression test
accordingly.
Change-Id: I866b5db83b504fae190e58c306c01a7a4296672d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239200
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Limiting the Config to the view seems reasonable, considering that it is
only used to run the `go` command. I prefer just having the cache run
go commands, so that source doesn't have to deal with the environment.
This also enables CL 237517.
Change-Id: I639c082592de30e9682dc25cdd12c7751ddb4f97
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237600
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We should always go through the runner to avoid load serialization
errors. This change also updates the comments and uses pointers to
Invocations consistently. This causes a few updates throughout x/tools.
This change also results in a few modifications to the go:generate code
lenses, as they operate on directories rather than file URIs.
Change-Id: I6306e761e68dfdd23f1b410e44aab0ffa85d234c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237685
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We use file identities pervasively throughout gopls. Prior to this
change, the identity is the modification date of an unopened file, or
the hash of an opened file. That means that opening a file changes its
identity, which causes unnecessary churn in the cache.
Unfortunately, there isn't an easy way to fix this. Changing the
cache key to something else, such as the modification time, means that
we won't unify cache entries if a change is made and then undone. The
approach here is to read files eagerly in GetFile, so that we know their
hashes immediately. That resolves the churn, but means that we do a ton
of file IO at startup.
Incidental changes:
Remove the FileSystem interface; there was only one implementation and
it added a fair amount of cruft. We have many other places that assume
os.Stat and such work.
Add direct accessors to FileHandle for URI, Kind, and Version. Most uses
of (FileHandle).Identity were for stuff that we derive solely from the
URI, and this helped me disentangle them. It is a *ton* of churn,
though. I can revert it if you want.
Change-Id: Ia2133bc527f71daf81c9d674951726a232ca5bc9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237037
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This removes all the cache/session/view hooks from the lsp and instead
uses normal introspection from the client to find all the entities
rather than keeping shadow copies of the object graph in the debug page
handler.
This required the addition only of the ability to view the sessions open
on a cache and exposing the unique identifier for all the objects, both
of which are useful and reasonable things to have in the API anyway.
Change-Id: Ic19903e7b19832ca79290954ec373d4177789742
Reviewed-on: https://go-review.googlesource.com/c/tools/+/236197
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In addition to adding a `go mod vendor` command option, which can be
exposed via an editor client frontend, we show a suggestion to users who
experience the "inconsistent vendoring" error message.
The main change made here is that we save the view initialization error,
and we return it if the view has absolutely no metadata. This seems
reasonable enough, but my fear is that it may lead to us showing
outdated error messages. I will spend some time improving the handling
of initialization errors in follow-up CLs.
Updates golang/go#39100
Change-Id: Iba21fb3fbfa4bca956fdf63736b397c47fc7ae44
Reviewed-on: https://go-review.googlesource.com/c/tools/+/235619
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Now that we support authoring cgo packages better, we need a way to
regenerate the C definitions. Doing it automatically is very difficult;
in particular, referencing a new symbol from the C package may require
regeneration, but we don't want to do that for every typo.
For now, give the user a button and make them push it. We attach a
code lens to the import "C" line. This is vulnerable to the usual
user-didn't-save glitches.
Updates golang/go#35721.
Change-Id: Iaa3540a9a12bbd8705e7f0e43ad0be1b22e87067
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234103
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Some code lenses may be undesirable for certain users or editors -- for
example a code lens that runs tests, when VSCode already supports this
functionality outside of the LSP. To handle such situations, support
configuring code lenses via a new 'codelens' gopls option.
Add support for code lens in regtests, and use this to test the new
configuration. To achieve this, thread through a new 'EditorConfig' type
that configures the fake editor's LSP session. It made sense to move the
test Env overlay onto this config object as well.
While looking at them, document some types in source.Options.
Change-Id: I961077422a273829c5cbd83c3b87fae29f77eeda
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232680
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change attempts to fix a concurrency error that would cause
textDocument/CodeLens, textDocument/Formatting, textDocument/DocumentLink,
and textDocument/Hover from failing on go.mod files.
The issue was that the go command would return a potential concurrency
error since the ModHandle and the ModTidyHandle are both using the
temporary go.mod file.
Updates golang/go#37824
Change-Id: I6cd63c1f75817c7308e033aec473966536a2a3bd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224917
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds support for recognizing a //go:generate directive
and offering a CodeLens that will then send a "generate" command to
the server to run "go generate" or "go generate ./...". Because
"go generate" can only be executed per package, there is no need to show
the CodeLens on top of every //go:generate comment. Therefore, only the
top directive will be considered.
The stdout/stderr of the go generate command will be piped to the logger
while stderr will also be sent to the editor as a window/showMessage
The user will only know when the process starts and when it ends so that they wouldn't
get bogged with a large number of message windows popping up. However, they can
check the logs for all the details.
If a user wants to cancel the "go generate" command, they will be able
to do so with a "Cancel" ActionItem that the server will offer to the client
Fixesgolang/go#37680
Change-Id: I89a9617521eab20859cb2215db133f34fda856c7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222247
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds an upgrade all dependencies codelens on the go.mod file if there are available upgrades.
Updates golang/go#36501
Change-Id: I86c1ae7e7a6dc01b7f5cd7eb18e5a11d96a3acc1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221108
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Over time we have accumulated a disturbing number of ways to run the Go
command, each of which supported slightly different features and
workarounds. Combine all of them.
This unavoidably introduces some changes in debug logging behavior; I
think we should try to fix them incrementally and consistently.
Updates golang/go#37368.
Change-Id: I664ca8685bf247a226be3cb807789c2fcddf233d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/220737
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In general, we expect all URIs to be file:// scheme. Silently ignore
requests that come in for other schemes. (In the command-line client we
panic since we should never see anything else.)
The calling convention for beginFileRequest is odd; see the function
comment.
Fixesgolang/go#33699.
Change-Id: Ie721e9a85478f3a12975f6528cfbd28cc7910be8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219483
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Create a real type for protocol.DocumentURIs. Remove span.NewURI in
favor of path/URI-specific constructors. Remove span.Parse's ability to
parse URI-based spans, which appears to be totally unused.
As a consequence, we no longer mangle non-file URIs to start with
file://, and crash all over the place when one is opened.
Updates golang/go#33699.
Change-Id: Ic7347c9768e38002b4ad9c84471329d0af7d2e05
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219482
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a code lens for go.mod files that will let a user know if a module can be upgraded, once it is clicked gopls will run a command to update that module.
Updates golang/go#36501
Change-Id: Id22b8097ede4972cf73bc029ec927544a71b7150
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218557
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first in a series of changes to move overlay handling to the
snapshot instead of the session. We may not be able to fully get away
from managing overlays on the session, but we should be able to only use
overlays when they are known to the snapshot.
Change-Id: I88b125117cd2cfbd0ff9ef16a944a34297c81b10
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218324
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Now that the view can report its own validity, we no longer need to have
an extra function to handle that.
Change-Id: Icd22f9b08601bd0fe18be064c43d21be2d6782e7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216144
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
There is no reason for these functions to live on the view. They make
more sense as unexported functions in internal/lsp/source.
Initially, I had to propagate contexts through a lot of functions in
internal/lsp/source, but instead I removed the unused contexts forom
snapshot.GetFile.
Change-Id: I8323419d0356feb2010091fe8d3ed35e511f801a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214384
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This is the first step to surfacing potential fixes and suggestions to a user's go.mod file. Specifically, it will show a warning if you have a dependency that is not used, or if a dependency is declared as indirect when it should be direct and vice versa.
This CL adds functionality for version of Go that are >= 1.14.
Updates golang/go#31999
Change-Id: Id60fa0ee201dcd843f62e2659dda8e795bd671db
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211937
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change eliminates the extra step of calling GetFile on the view and
getting the FileHandle from the snapshot. It also eliminiates the
redundant source.File type. Follow up changes will clean up the file
kind handling, since it still exists on the fileBase type.
Change-Id: I635ab8632821b36e062be5151eaab425a5698f60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211778
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Rather than panicking when we have not created any views for the packages,
we should show a reasonable error to the user. This change propagates the
errors to the user.
Updates golang/go#35599
Change-Id: I49789d8ce18e154f111bc3584488f468a129e30c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207344
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change does not complete the work to handle snapshots correctly,
but it does implement the behavior of re-building the snapshot on each
file invalidation.
It also moves to the approach of caching the FileHandles on the snapshot,
rather than in the goFile object, which is now not necessary.
Finally, this change shifts the logic of metadata invalidation into the
content invalidation step, so there is less logic to decide if we should
re-load a package or not.
Change-Id: I18387c385fb070da4db1302bf97035ce6328b5c3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197799
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This changes adds basic support for running `go mod tidy` as a code
action when a user opens a go.mod file. When we have a command
available like `go mod tidy -check`, we will be able to return edits as
part of the codeAction. For now, we execute the command directly.
This change also required a few modifications to our handling of file
kinds so that we could distinguish between a Go file and a go.mod file.
Change-Id: I343079b8886724b67f90a314e45639545a34f21e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196322
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
