Change-Id: I00c97c36e8fdc79582eaed21877e4c8f44568666
Reviewed-on: https://go-review.googlesource.com/34316
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates #12559.
Change-Id: I5e8f4cf7071d0d71618527a6b6096e771d5eeb28
Reviewed-on: https://go-review.googlesource.com/34317
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Explicitly filter any C-only cgo functions out of pclntable,
which allows them to be duplicated with the host binary.
Updates #18190.
Change-Id: I50d8706777a6133b3e95f696bc0bc586b84faa9e
Reviewed-on: https://go-review.googlesource.com/34199
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The client code was using time.Now() (wall time) to determine whether
the cause of a non-nil error meant that a timeout had occured. But on
Windows, the clock used for timers (time.After, time.Sleep, etc) is
much more accurate than the time.Now clock, which doesn't update
often.
But it turns out that as of the recent https://golang.org/cl/32478 we
already have the answer available easily. It just wasn't in scope.
Instead of passing this information along by decorating the errors
(risky this late in Go 1.8, especially with #15935 unresolved), just
passing along the "didTimeout" func internally for now. We can remove
that later in Go 1.9 if we overhaul Transport errors.
Fixes#18287 (I hope)
Change-Id: Icbbfceaf02de6c7ed04fe37afa4ca16374b58f3c
Reviewed-on: https://go-review.googlesource.com/34381
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Drivers which previously supported tip will need to update to this
revision before release.
Fixes#18284
Change-Id: I70b8e7afff1558a8b5348885ce9f50e067c72ee9
Reviewed-on: https://go-review.googlesource.com/34330
Run-TryBot: Daniel Theophanes <kardianos@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
document about the consecutive dialing introduced in Go 1.5.
If address is resolved to multiple addresses,
Dial will try each address in order until one succeeds.
Deadline is used to try each address (calculated based on
total number of resolved addresses)
Fixes: #17617
Change-Id: I56b6399edb640c8ef507675f98e0bd45a50d4e2d
Reviewed-on: https://go-review.googlesource.com/34176
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now that we try to handle qualifiers correctly (as of CL 33325), don't
strip them from a void* pointer. Otherwise we break a case like "const
void**", as the "const" qualifier is dropped and the resulting
"void**" triggers a warning from the C compiler.
Fixes#18298.
Change-Id: If51df1889b0f6a907715298c152e6d4584747acb
Reviewed-on: https://go-review.googlesource.com/34370
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I1d6a2120a444d1ab9b9ecfdf27464325ad741d55
Reviewed-on: https://go-review.googlesource.com/34315
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A lot of things had to line up to make this break,
but the caching of download results interacted badly
with vendor directories, "go get -t -u", and wildcard
expansion.
Fixes#18219.
Change-Id: I2676498d2f714eaeb69f399e9ed527640c12e60d
Reviewed-on: https://go-review.googlesource.com/34201
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The check for duplicate struct field tags introduced in CL 16704
triggers a panic when an anonymous struct field with a duplicate name
is encountered. For such a field, the names slice of the ast.Field is
nil but accessed regardless to generate the warning message.
Additionally, the check produces false positives for XML tags in some
cases:
- When fields are encoded as XML attributes, a warning is produced when
an attribute reuses a name previously used for an element.
Example:
type Foo struct {
First int `xml:"a"`
NoDup int `xml:"a,attr"` // warning about reuse of "a"
}
- When XMLName is used to set the name of the enclosing struct element,
it is treated as a regular struct field.
Example:
type Bar struct {
XMLName xml.Name `xml:"a"`
NoDup int `xml:"a"` // warning about reuse of "a"
}
This commit addresses all three issues. The panic is avoided by using
the type name instead of the field name for anonymous struct fields when
generating the warning message. An additional namespace for checking XML
attribute names separately from element names is introduced. Lastly,
fields named XMLName are excluded from the check for duplicate tags.
Updates #18256
Change-Id: Ida48ea8584b56bd4d12ae3ebd588a66ced2594cc
Reviewed-on: https://go-review.googlesource.com/34070
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The test for the race detector itself had a race of a sort not
detected by the race detector.
Fixes#18286.
Change-Id: I3265eae275aaa2869a6b6d3e8675b0d88b25831b
Reviewed-on: https://go-review.googlesource.com/34287
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And move some code to make control flow more obvious.
No functional change.
Change-Id: Iefaa96f664070ab2accade1857e1946e56df6902
Reviewed-on: https://go-review.googlesource.com/34285
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For the 1.8 release, go back to invoking the assembler once per .s
file, to avoid the problem in #18225. When the assembler is fixed, the
change to cmd/go/build.go can be rolled back, but the test in
cmd/go/go_test.go should remain.
Fixes#18225.
Update #15680.
Change-Id: Ibff8d0c638536efb50a2b2c280b41399332f4fe4
Reviewed-on: https://go-review.googlesource.com/34284
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is the simplest CL that I can make for Go 1.8. For Go 1.9, we can revisit it
and optimize the redundant address generation instructions or just fix#599 instead.
Fixes#18140.
Change-Id: Ie4804ab0e00dc6bb318da2bece8035c7c71caac3
Reviewed-on: https://go-review.googlesource.com/34193
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Also, if we changed the gsignal stack to match the stack we are
executing on, restore it when returning from the signal handler, for
safety.
Fixes#18255.
Change-Id: Ic289b36e4e38a56f8a6d4b5d74f68121c242e81a
Reviewed-on: https://go-review.googlesource.com/34239
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Change the openbsd runtime to use the current sys_kill and sys_thrkill
system calls.
Prior to OpenBSD 5.9 the sys_kill system call could be used with both
processes and threads. In OpenBSD 5.9 this functionality was split into
a sys_kill system call for processes (with a new syscall number) and a
sys_thrkill system call for threads. The original/legacy system call was
retained in OpenBSD 5.9 and OpenBSD 6.0, however has been removed and
will not exist in the upcoming OpenBSD 6.1 release.
Note: This change is needed to make Go work on OpenBSD 6.1 (to be
released in May 2017) and should be included in the Go 1.8 release.
This change also drops support for OpenBSD 5.8, which is already an
unsupported OpenBSD release.
Change-Id: I525ed9b57c66c0c6f438dfa32feb29c7eefc72b0
Reviewed-on: https://go-review.googlesource.com/34093
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The pclntable contains pointers to functions. If the function symbol
is exported in a plugin, and there is a matching symbol in the host
binary, then the pclntable of a plugin ends up pointing at the
function in the host module.
This doesn't work because the traceback code expects the pointer to
be in the same module space as the PC value.
So don't export functions that might overlap with the host binary.
This way the pointer stays in its module.
Updates #18190
Change-Id: Ifb77605b35fb0a1e7edeecfd22b1e335ed4bb392
Reviewed-on: https://go-review.googlesource.com/34196
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Specify that that LimitedReader returns EOF when the underlying
R returns EOF even if bytes remaining, N > 0.
Fixes#18271
Change-Id: I990a7135f1d31488d535238ae061d42ee96bacb7
Reviewed-on: https://go-review.googlesource.com/34249
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Change-Id: Icb842a80cab2b07b9ace1e8e14c4a19c48a92c43
Reviewed-on: https://go-review.googlesource.com/34247
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Made many minor changes so that the document is consistent with itself.
Some more noticeable changes:
* CL/34141: Revert "testing: add T.Context method"
* CL/33630: net/http: document restrictions on ETag as expected by ServeContent
Change-Id: I39ae5e55c56e374895c115e6852998c940beae35
Reviewed-on: https://go-review.googlesource.com/34243
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Must add locations to the profile when generating a profile.proto.
This fixes#18229
Change-Id: I49cd63a30759d3fe8960d7b7c8bd5a554907f8d1
Reviewed-on: https://go-review.googlesource.com/34028
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There is nothing notable to mention as far as users are concerned.
Fixes#17929 (another bug tracks the remaining TODO item)
Change-Id: Id39f787581ed9d2ecd493126bb7ca27836816d4b
Reviewed-on: https://go-review.googlesource.com/34145
Reviewed-by: Michael Matloob <matloob@golang.org>
