Now that filepath.WalkDir is available, it is more efficient
and should be used in place of filepath.Walk.
Update the tree to reflect best practices.
As usual, the code compiled with Go 1.4 during bootstrap is excluded.
(In this CL, that's only cmd/dist.)
For #42027.
Change-Id: Ib0f7b1e43e50b789052f9835a63ced701d8c411c
Reviewed-on: https://go-review.googlesource.com/c/go/+/267719
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Pseudo branch instructions BGT, BGTU, BLE, and BLEU implemented In
CL 226397 were translated inconsistently compared to other ones due
to the inversion of registers. For instance, while "BLT a, b" generates
"jump if a < b", "BLE a, b" generates "jump if b <= a."
This CL fixes the translation in the assembler and the tests.
Change-Id: Ia757be73e848734ca5b3a790e081f7c4f98c30f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/271911
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Joel Sing <joel@sing.id.au>
Run-TryBot: Joel Sing <joel@sing.id.au>
This allows directly creating an ONONAME, which is a primordial Name
before having its Op initialized. Then after an Op is assigned, we
never allow it to be reassigned.
Passes buildall w/ toolstash -cmp.
Change-Id: Ibc2f413dc68c0af6a96abfe653c25ce31b184287
Reviewed-on: https://go-review.googlesource.com/c/go/+/274620
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Allows getting rid of the SetPkg method and also addresses a
long-standing TODO in the exporter. Suggested by rsc@.
Passes buildall w/ toolstash -cmp.
Change-Id: Ib294f75f1350572efb2e0d993d49efef884de3d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/274440
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
It's noisy and not doing any harm, and we still have an entire release
cycle to revisit and address the issue properly.
Updates #42938
Change-Id: I1de5cfb495a8148c9c08b215deba38f2617fb467
Reviewed-on: https://go-review.googlesource.com/c/go/+/274732
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This CL adds the remaining constructors needed to abstract away
construction of Types, and updates the compiler to use them
throughout. There's now just a couple uses within test cases to
remove.
While at it, I also replace the Func.Outnamed field with a simple
helper function, which reduces the size of function types somewhat.
Passes toolstash/buildall.
Change-Id: If1aa1095c98ae34b00380d0b3531bd63c10ce885
Reviewed-on: https://go-review.googlesource.com/c/go/+/274713
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
There's no need for the bucket type to be precise. The compiler
doesn't actually generate code that references these fields; it just
needs it for size and GC bitmap calculations.
However, changing the type field does alter the runtime type
descriptor and relocations emitted by the compiler, so this change
isn't safe for toolstash.
Change-Id: Icf79d6c4326515889b13435a575d618e3bbfbcd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/274712
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Change-Id: Ie2950cdc5406915935f114bfd97ef03d965f9069
Reviewed-on: https://go-review.googlesource.com/c/go/+/274616
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The gofrontend code doesn't distinguish semicolon and newline,
and it doesn't have special treatment for EOF.
syntax/semi6.go:9:47: error: unexpected semicolon or newline in type declaration
syntax/semi6.go:11:62: error: unexpected semicolon or newline in type declaration
Change-Id: I9996b59a4fc78ad1935e779f354ddf75c0fb44e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/274692
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Apparently, the darwin kernel may cache the code signature at
mmap. When we mmap the output buffer, it doesn't have a code
signature (as we haven't generated one). Invalidate the kernel
cache after writing the file.
See https://github.com/golang/go/issues/42684#issuecomment-731704900
for more information.
Updates #38485.
Fixes#42684.
Change-Id: Iac2ef756ca1454c856944423e5040b8e17a6b420
Reviewed-on: https://go-review.googlesource.com/c/go/+/272258
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
As the code signature contains hashes of the entire file (except
the signature itself), rewriting buildid will invalidate the
signature. This CL makes it regenerate the signature when
rewriting the buildid. It only does it when the file already has
a code signature, with proper size (darwin/arm64 binaries
generated by the Go linker should have).
Updates #38485, #42684.
Change-Id: I082d9e5808b0ee6a35f9c362d7262aadd9113c81
Reviewed-on: https://go-review.googlesource.com/c/go/+/272257
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
This CL lets the linker code-sign output binaries on
darwin/arm64, as the kernel requires binaries must be signed in
order to run.
This signature will likely be invalidated when we stamp the
buildid after linking. We still do it in the linker, for
- plain "go tool link" works.
- the linker generates the LC_CODE_SIGNATURE load command with
the right size and offset, so we don't need to update it when
stamping the buildid.
Updates #38485, #42684.
Change-Id: Ia306328906d73217221ba31093fe61a935a46122
Reviewed-on: https://go-review.googlesource.com/c/go/+/272256
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
These replacement rules assume that TST and TEQ set V. But TST and
TEQ do not set V. This is a problem because instructions like LT are
actually checking for N!=V. But with TST and TEQ not setting V, LT
doesn't do anything meaningful. It's possible to construct trivial
miscompilations from this, such as:
package main
var x = [4]int32{-0x7fffffff, 0x7fffffff, 2, 4}
func main() {
if x[0] > x[1] {
panic("fail 1")
}
if x[2]&x[3] < 0 {
panic("fail 2") // Fails here
}
}
That first comparison sets V, via the CMP that subtracts the values
causing the overflow. Then the second comparison operation thinks that
it uses the result of TST, when it actually uses the V from CMP.
Before this fix:
TST R0, R1
BLT loc_6C164
After this fix:
TST R0, R1
BMI loc_6C164
The BMI instruction checks the N flag, which TST sets. This commit
fixes the issue by using [LG][TE]noov instead of vanilla [LG][TE], and
also adds a test case for the direct issue.
Fixes#42876.
Change-Id: I13c62c88d18574247ad002b671b38d2d0b0fc6fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/274026
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
This reverts commit 6af088bfc6.
Reason for revert: Broke many tests inside Google which implies many
tests were broken outside of Google as well. The tests may be brittle
but still would require work to change and it's not clear it's worth
the benefit.
Updates #36221Fixes#42675
Change-Id: Id3a14eb37e7119f5abe50e80dfbf120fdc44db72
Reviewed-on: https://go-review.googlesource.com/c/go/+/273747
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Trust: Joe Tsai <thebrokentoaster@gmail.com>
Just clearing away some scaffolding artifacts from previous
refactorings.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
ex {
import "cmd/compile/internal/ir"
import "cmd/compile/internal/types"
var n *ir.Name; n.Name() -> n
var f *ir.Func; f.Func() -> f
var o types.Object
ir.AsNode(o).Sym() -> o.Sym()
ir.AsNode(o).Type() -> o.Type()
ir.AsNode(o).(*ir.Name) -> o.(*ir.Name)
ir.AsNode(o).(*ir.Func) -> o.(*ir.Func)
var x ir.Node
ir.AsNode(o) != x -> o != x
}
'
Change-Id: I946ec344bd7ee274900a392da53b95308ceaade4
Reviewed-on: https://go-review.googlesource.com/c/go/+/274592
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
If the new Config.IgnoreBranches flag is set, the typechecker
ignores errors due to misplaced labels, break, continue,
fallthrough, or goto statements.
Since the syntax parser already checks these errors, we need
to disable a 2nd check by the typechecker to avoid duplicate
errors when running the compiler with the new typechecker.
Adjusted test/run.go to not ignore some of the tests that
used to fail because of duplicate errors.
Change-Id: I8756eb1d44f67afef5e57da289cd604b8e1716db
Reviewed-on: https://go-review.googlesource.com/c/go/+/274612
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Added a new flag -G to run. Setting -G (as in: go run run.go -G)
will run tests marked with "errorcheck" (and no other flags) also
with the compiler using the new typechecker.
Many tests don't pass yet (due to discrepancies in error messages).
The top-level tests in the test directory which don't pass yet have
been explicitly excluded, permitting to see the current status.
Future CLs will bring error messages in sync and eventually all
tests should pass.
Change-Id: I7caf5eff413e173f68d092af4bbe458434718d74
Reviewed-on: https://go-review.googlesource.com/c/go/+/274313
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In order to get types2 usable by the compiler, we need to
pass all the compiler tests with respect to error messages.
Sometimes the compiler error messages are better, sometimes
the types2 error messages are better. Where we can, we decide
on a case-by-case basis; but sometimes, for expediency's sake,
we just choose the compiler error message as it may reduce the
amount of tests that we need to update.
This CL introduces a new Config flag: CompilerErrorMessages.
If set, the typechecker emits an error message that matches
the expected errors in the tests most easily. Eventually, we
need to get rid of this flag by either adjusting the typechecker
errors or the test cases; t.b.d. on a case-by-case basis.
This CL also adjust a few error typechecker error messages already.
Change-Id: I9d4e491efadf87e999fc0d5b5151ec02a059f891
Reviewed-on: https://go-review.googlesource.com/c/go/+/274312
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The code signature contains hashes of the entire file (except the
signature itself), including the buildid. Therefore, the buildid
cannot depend on the signature. Otherwise updating buildid will
invalidate the signature, and vice versa. As we cannot change the
code-signing algorithm, we can only change buildid calculation.
This CL changes the buildid calculation to exclude the Mach-O
code signature. So updating code signature after stamping the
buildid will not invalidate the buildid.
Updates #38485, #42684.
Change-Id: I8a9e2e25ca9dc00d9556d13b81652f43bbf6a084
Reviewed-on: https://go-review.googlesource.com/c/go/+/272255
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
On macOS/ARM64, the kernel requires that binaries must have a
valid code signature to run. The C toolchain code-signs the
binary at link time. We do the same.
It is more subtle for Go because we stamp the buildid after
linking. As the signature contains hashes of the entire file
(except the signature itself), we must (re)generate the signature
after stamping the buildid.
This CL adds a new codesign package, which provides
functionality to generate the code signature. It is a separate
internal package so it can be used both in the linker and by the
go command. The next CLs will add code-signing to the linker and
the go command.
Updates #38485, #42684.
Change-Id: Id46801a6665beebaab0eb413ff2e64c5b9467059
Reviewed-on: https://go-review.googlesource.com/c/go/+/272254
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
CL 269357 is the only difference between the pseudo-version we were
using and v0.4.0.
Change-Id: If15326bda51e04b47130429b818bfe2facaee03d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274593
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
It's difficult for module authors to provide installation instructions
that work in both Go 1.15 and 1.16. We'll wait until 1.17 to print a
deprecation warning for installing executables with 'go get'.
Fixes#42885
Change-Id: I835b447e83e760f48fd664e8a117749e0cb59f83
Reviewed-on: https://go-review.googlesource.com/c/go/+/274552
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
If one was using http.Transport with DisableKeepAlives and trying
to upgrade a connection against net/http's Server, the Server
would not allow a "Connection: Upgrade" header to be written
and instead override it to "Connection: Close" which would
break the handshake.
This change ensures net/http's Server does not override the
connection header for successful protocol switch responses.
Fixes#36381.
Change-Id: I882aad8539e6c87ff5f37c20e20b3a7fa1a30357
GitHub-Last-Rev: dc0de83201
GitHub-Pull-Request: golang/go#36382
Reviewed-on: https://go-review.googlesource.com/c/go/+/213277
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Once the connection is put back into the idle pool, the request should
not take any action if the connection is closed.
Fixes#41600
Change-Id: I5e4ddcdc03cd44f5197ecfbe324638604961de84
Reviewed-on: https://go-review.googlesource.com/c/go/+/257818
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Trust: Damien Neil <dneil@google.com>
For #40700Fixes#42912
Change-Id: Ifd36950136db1fc93a8de76a2717a473210418b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/274473
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Added notes for:
* go test -c and -i flags used with unknown flags
* GO111MODULE=on by default
* GOVCS
* Dropped requirements on excluded versions
Removed TODOs for documentation on the retract directive and
'go install pkg@version'. These pages will be written after the beta.
Change-Id: Ic9877a62f908be177a6035a039b72e969e7b7f22
Reviewed-on: https://go-review.googlesource.com/c/go/+/274438
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
There's not really any use to tracking function-scoped constants and
types on Curfn.Dcl, and there's sloppy code that assumes all of the
declarations are variables (e.g., cmpstackvarlt).
Change-Id: I5d10dc681dac2c161c7b73ba808403052ca0608e
Reviewed-on: https://go-review.googlesource.com/c/go/+/274436
Reviewed-by: Russ Cox <rsc@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
This CL introduces types.NewBasic, for creating the predeclared
universal types, and reorganizes how the universe is initialized so
that all predeclared types are uniformly constructed.
There are now a bunch of Type fields that are no longer assigned
outside of the package, so this CL also introduces some new accessor
methods that a subsequent CL will mechanically introduce uses of.
Change-Id: Ie7996c3d5f1ca46cd5bfe45ecc91ebfa6a7b6c7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274435
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
The start of abstracting away Type fields. This adds a new constructor
for named types, styled after go/types.NewNamed. Along with helper
methods for SetNod and Pos, this allows hiding Nod.
Change-Id: Ica107034b6346c7b523bf6ae2a34009e350a9aa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/274434
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Now that setUnderlying is decoupled from Nodes, it can be moved into
package types, where it really belongs.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
mv setUnderlying SetUnderlying
mv SetUnderlying typex.go
mv typex.go cmd/compile/internal/types
'
cd ../types
rf '
mv typex.go type.go
'
Change-Id: I76e2d4d8a6df599f24a731c4d8e5774ec83a119c
Reviewed-on: https://go-review.googlesource.com/c/go/+/274433
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
The code for type-checking defined types was scattered between
typecheckdef, typecheckdeftype, and setUnderlying. There was redundant
work between them, and setUnderlying also needed to redo a lot of work
because of its brute-force solution of just copying all Type fields.
This CL reorders things so as many of the defined type's fields are
set in advance (in typecheckdeftype), and then setUnderlying only
copies over the details actually needed from the underlying type.
Incidentally, this evidently improves our error handling for an
existing test case, by allowing us to report an additional error.
Passes toolstash/buildall.
Change-Id: Id59a24341e7e960edd1f7366c3e2356da91b9fe7
Reviewed-on: https://go-review.googlesource.com/c/go/+/274432
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Allows emitting errors about ineffectual //go:linkname directives.
In particular, this exposed: a typo in os2_aix.go; redundant (but
harmless) directives for libc_pipe in both os3_solaris.go and
syscall2_solaris.go; and a bunch of useless //go:linkname directives
in macOS wrapper code.
However, because there's also ineffectual directives in the vendored
macOS code from x/sys, that can't be an error just yet. So instead we
print a warning (including a heads up that it will be promoted to an
error in Go 1.17) to prevent backsliding while we fix and re-vendor
that code.
Passes toolstash-check.
Change-Id: I59badeab5df0d8b3abfd14c6066e9bb00e840f73
Reviewed-on: https://go-review.googlesource.com/c/go/+/273986
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
RawCopy breaks the invariant that ir.Orig depends on for
allowing nodes to omit keeping their own orig fields.
Avoid surprises by unexporting it.
The only use in package gc was removed in the previous CL.
This one is a straight global search and replace RawCopy -> rawCopy.
Change-Id: Ia99c0f4665bf7ed4f878cc44456d5fbdf33bab8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274293
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The ONIL export bug happened because the logic about
maintaining an “implicit” orig pointer in the comments
around ir.Orig only applies to Copy and SepCopy, not to
direct use of RawCopy. I'd forgotten those could exist.
The sole direct use of RawCopy was for the OLITERAL/ONIL case.
The ONIL is now provably indistinguishable from Copy, since
NilExpr does not have an explicit Orig field, so for NilExpr
RawCopy and Copy are the same.
The OLITERAL is not, but we can reconstruct the effect
with Copy+SetOrig to be explicit that we need the orig link.
The next CL will unexport RawCopy.
Also fix a typo in MapType doc comment.
Passes buildall w/ toolstash -cmp.
Change-Id: I876a85ff188e6d1cd4c0dfa385be32482e0de0d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/274292
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
An earlier version of the draft design supported pointer designation for
type parameters. Remove related code since we don't need it anymore.
Change-Id: I0d9e8c5f02a9a6745ff7ee15b8267a99ab1529e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/273327
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When checking if a defined type is part of a type loop, we can
short-circuit if it was defined in another package. We can assume any
package we import already successfully compiled, so any types it
contains cannot be part of a type loop.
This also allows us to simplify the logic for recursing into the type
used in the type declaration, because any defined type from this
package will have a properly setup node.
Change-Id: Ic024814d95533afd9e59f2103c8ddb22bd87e900
Reviewed-on: https://go-review.googlesource.com/c/go/+/274294
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Add tests for BGE/BGEU/BLT/BLTU branch instructions. Also add pure Go variants
of these to ensure that the test data, Go and assembly all match up.
Change-Id: I84c68605e116a4e57f6c5c765bf0aaecab84b675
Reviewed-on: https://go-review.googlesource.com/c/go/+/271913
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Quey-Liang Kao <s101062801@m101.nthu.edu.tw>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Currently, in the non-DynlinkingGo case with external linking, we generate a
R_X86_64_GOTPCREL relocation for the imported symbol. This results in the
external linker turning this into a R_X86_64_GLOB_DAT relocation, rather
than a R_X86_64_JUMP_SLOT. Always generate R_X86_64_PLT32 for SDYNIMPORT
calls so that these calls work correctly.
Update #36435Fixes#42671
Change-Id: I8a28884b7853cb4135053ed817bedc919482f4ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/270377
Trust: Joel Sing <joel@sing.id.au>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL only adds the new constant, which is not safe for toolstash -cmp.
Change-Id: I774463a0ab5f57113d67a8888b6ac787be68510c
Reviewed-on: https://go-review.googlesource.com/c/go/+/274110
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are fairly rote implementations of structs appropriate to
each Op (or group of Ops).
The names of these are unknown except to ir.NodAt for now.
A later, automated change will introduce direct use of the types
throughout package gc.
(This CL is expressions; the previous one was statements.)
This is the last of the Ops that were previously handled by the
generic node struct, so that struct and its methods can be
and are deleted in this CL.
Passes buildall w/ toolstash -cmp.
Change-Id: I1703f35f24dcd3f7c5782a278e53c3fe04e87c37
Reviewed-on: https://go-review.googlesource.com/c/go/+/274109
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
It's not types's responsibility to understand how package
initialization is implemented. Instead, have gc keep track of the
order that packages were imported, and then look for inittask
declarations.
Also, use resolve to force importing of the inittask's export data, so
that we can get the appropriate linker symbol index. (This is also why
this CL doesn't satisfy "toolstash -cmp".)
Change-Id: I5b706497d4a8d1c4439178863b4a8dba4da0f5a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/274006
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The compile -h flag is *meant* to panic, so you can see the stack
trace where the error is being printed. Make it do that again.
Change-Id: Ieb0042863582d7a4c5d08d2f866a144962915b06
Reviewed-on: https://go-review.googlesource.com/c/go/+/274116
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are fairly rote implementations of structs appropriate to
each Op (or group of Ops).
The names of these are unknown except to ir.NodAt for now.
A later, automated change will introduce direct use of the types
throughout package gc.
Passes buildall w/ toolstash -cmp.
Change-Id: Ie9835fcd2b214fda5b2149e187af369d76534487
Reviewed-on: https://go-review.googlesource.com/c/go/+/274108
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The list is no longer needed and can be deleted.
Doing so reduces the inlining cost of any function containing
an explicit call to new by 1 point, so this change is not
toolstash -cmp safe.
Change-Id: Id29e115d68e466a353708ab4b8c1021e9c85a628
Reviewed-on: https://go-review.googlesource.com/c/go/+/274132
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Using expression nodes restricts the set of valid SetOp operations,
because you can't SetOp across representation. Rewrite various code
to avoid crossing those as-yet-unintroduced boundaries.
This also includes choosing a single representation for any given Op.
For example, OCLOSE starts out as an OCALL, so it starts with a List
of one node and then moves that node to Left. That's no good with
real data structures, so the code picks a single canonical implementation
and prepares it during the conversion from one Op to the next.
In this case, the conversion of an OCALL to an OCLOSE now creates
a new node with Left initialized from the start. This pattern repeats.
Passes buildall w/ toolstash -cmp.
Change-Id: I55a0872c614d883cac9d64976c46aeeaa639e25d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274107
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
